Want to use JDeskTopPane in JPanel
Hi
I want to use JDeskTopPane in a JPanel. The reason is that I want to use some JInternalFrames within a particular panel of my application.
I am using an applet so obviously I could use this.setContentPane() when loading the APPLET, however I need some kind of setContentPane() method on my JPanel which I am using.
Not sure if you can do that to a JPanel.
cheers,
Oliver
This section from the Swing tutorial shows you how to use a JDeskTopPane and JInternalFrame:
http://java.sun.com/docs/books/tutorial/uiswing/components/internalframe.html
Similar Messages
-
Inserting a Gui program using JFrames and JPanel
I'm trying to insert a chat program into a game that I've created! The chat program is using JFrames and JPanels. I want to insert this into a GridLayout and Panel. How can I go about doing this?
whatever is in the frame's contentPane now, you add to a separate JPanel.
you also add your chat stuff to the separate panel
the separate panel is added to the frame as the content pane -
Every time I login I get the message "aosnotifyd wants to use your confidential information stored in "my name" in your keychain." How do I know if it is safe to allow this? Can anyone advise please?
My immediate reaction is to deny.
Have you downloaded or installed any application that may relate to the abbreviation AOS? It may not necessarily be the application's name, could be the developer or distributor.
As it's occuring at log-in, go to System Preferences > Accounts > your account > Login Items and look for a related item. If there's one there, right-click (or ctrl click) on it and select Reveal in Finder. That will show you where the originator of the item is on your system and should give you more of a clue as to what it is.
I'd remove the item from login items anyway (highlight and click the minus sign at the bottom of the window). There shouldn't be anything trying to use your keychain info to notify anyone. -
THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help! -
Help! I have a new iPhone 5s. My husband just lost his 4s, so I want to give him my 4s. We want to use same Apple ID so we both have access to itunes/apps purchases. Want to separate contacts, messages, mail, etc. I cannot change iCloud address on 4s iPhone. Also, when I tried to change iMessage I got a message that if I deleted my id (which seemed to be the only way to get my husband's I'd there), I would not be able to receive iMessages on any device.
Would someone kindly tell me how to set up th 4s for my husband so that we can keep our info separate? It would be most appreciated! Thanks!!Hey Fagen!
You will want to see the following article for guidance on achieving the result you wish to achieve:
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5661
I would just follow the instructions from this article to give your unused 4s to your spouse. Since you have already started using your 5s, you will still be receiving iMessages on that phone and will have no need to receive them on a device that has been replaced. Thanks for coming to the Apple Support Communities!
Cheers,
Braden -
I want to use the Mac more, I really do, but-
Admittedly, I’m a new Mac user (purchased Macbook Pro last October), and I’m really trying to get acclimated to it. I WANT to use it more, but I hit a roadblock at every turn. I’ll keep my issues limited to iMovie in this thread of course, but it seems like every step I take with a Mac is a struggle and more expensive than to do these same, relatively simple things on a PC. It never seems to do exactly what I want. Very simple features seem to be left out in order to entice you to purchase add-ons, plug-ins, or a different package more suited to the task (i.e. Final Cut).
I’m simply creating fancy slideshows using still photographs with iMovie, and find it grossly lacking in features. It nice for a basic introduction into slide show presentation software, but if you really would like to do something fancy, this software doesn’t cut it. I’m having “Ken Burns” limitations, like exactly what is posted here http://discussions.apple.com/thread.jspa?messageID=5222444&. There are only 12 transitions to choose from…12, which I can’t believe (even the utterly simplistic Windows Vista Movie Make has 63). Many times the playback seems “choppy” when played on the Mac, etc etc. I won’t bore you with more issues.
Now I understand any packaged photo presentation program (with iLife) is not going to have all the features as one that you would purchase exclusively for that function, so what are my alternatives?
1) Purchase Final Cut Express for $200, which has gotten very lukewarm reviews to put it mildly. Seems to be overly complicated and you cannot add sound tracks ?!? (I didn’t read all the details on this one).
2) Purchase Final Cut Studio for $1300. Not going to happen, way too pricey.
3) Purchase over $500 in GeeThree Volumes 1 through 10 (http://www.geethree.com/slick/), which I heard is about the best alternative to spicing up the iMovie software to make it satisfactorily functional (am I wrong in this assessment?)
4) Stick with my PC and run ProShow Producer for $250 (http://www.photodex.com/products/producer). This is a super program which has almost all of the features you could possibly want, and is very simple to use. The only thing it doesn’t have is a nice DVD menu system, which I can live with.
So someone, please give me some suggestions. Am I not seeing the forest through the trees? Are there any better alternatives? I’d even entertain purchasing another Mac software package if there is one out there that someone knows does a better job.Hi Lobster1071,
It is a shame when you can create a slideshow with Spotlight or the Finder yet an app intended for such can't get the job done. Once upon a time iMovie had about 15± transitions and 50± effects so it is not that you can't see the forest through the trees but that the forest has been clear cut and it's a big pile of brush and wood chips that is blocking your view. I don't believe anyone at the moment has any plug-ins for transitions or effects for iMovie 08 so if that was something you were looking for you would have to download the iMovie HD 6 available to those who thought the were buying a motion picture app.
Apple's blurb about iMovie 08.
Quick ways to add polish.
iMovie is designed to make everything simple — including the professional touches that help your movie stand out even more.
Photos and music.
Use the iLife Media Browser to bring photos into your movie from iPhoto. Summon the real-time, redesigned Ken Burns effect to add motion and zooms to still photos like a pro
So much for simplicity, maybe they mean we are supposed to have a seance to summon KB from eternal rest to be able to get this to work. Who knows? It's not too friendly in iM 6 either.
Graphic Converter is another powerful app that has many uses and you can create a slideshow with a KB effect that is a has a decent pan and zoom. Zoom is what they call it in GC. $20± US it is truly a bargain as it is a great tool to have even if iMovie was worth the disk space it consumes. In addition to pan and zoom you can combine video and still images and it provides you access to many other QuickTime transitions and effects you can then export it to a QT movie and to iDVD if you want.
The learning curve is a bit steep but support for registered users has always been very good and once you have the hang of it it is easy to include images of any size and shape with the ability to easily automate the tasks that you find yourself repeating quite often. If you need to rotate, crop or edit for any reason you can do that right within the same app. You can try with full functionality to check it out @ http://www.lemkesoft.com/ I do find that I use it most efficiently/productively in conjunction w/ QT Pro but don't think that is really required unless you want to have more than a two channel stereo track as GC allows the inclusion of an audio track but no editing of it. If you want multiple tracks or sound FX etc. that would still have to be done in GarageBand or elsewhere and saved to a single audio file.
iWork is also very capable of producing halfway decent slideshows with more features than iMovie as well. but I don't think I'd recommend going out and buying it unless you're looking for something to replace MS Office or something similar but there should be a 30 day trial already on you Mac or Install disc so you can try it out and see if it will work for your needs. If nothing else you will find out how much frustration you can really tolerate.
Sweet Polly -
can not keep shuffle on. i do not want to use Genises mixes as i want to listen to a variety of musicnot the same type.
Can anyone help me
-
I want to use the Apple TV to create an interactive white board type setting in the classroom. I appreciate the help.
My first reply was probably a bit vague but it's not clear exactly what you're planning to do.
Anyhow first off, remember this is simply a user to user forum and is not an Apple staffed technical advice area so no one here can accept any responsibility for the implementation you attempt.
If you intend to do anything that could potentially compromise patient confidentiality you must get appropriate advice from suitable agencies including your IT dept and probably Apple itself. Depending which country you are in you will be subject to local healthcare laws aimed at protecting patient confidentiality.
As users we know next to nothing about AppleTV under the hood security.
AppleTV runs a version of iOS just like iPhones and iPads.
There is no antivirus/firewall software for iOS as it's already pretty locked down.
That does not mean it is 100% secure as nothing is, and all these devices can potentially be hacked.
AppleTV itself does not store any content permanently, losing data when it's unplugged, so that is probably not an issue unless someone was going to attempt a forensic style data rescue from the internal components.
If your IT dept allows iPhones or iPads on the network then in principle it's the same, and in many ways less of an issue as it doesn't support 3rd party apps, only a small selection of features from Apple and selected partners.
I assume for your whiteboard plan this would entail using a touch screen like an iPad for mirroring. Be aware that fullscreen mirroring will send a 4:3 image to the display as the iPad screen is 4:3 not 16:9 (widescreen).
You need to work with your IT dept to assess the feasibility of what you want to do - unless you need internet access, to me it would seem a standalone local network without internet connectivity might remove some concerns about devices connecting to the main hospital network. Maybe their concern is simply wifi and possible interecption of data sent to the AppleTV - this would likely be a proprietary screen sharing format for Airplay but it could still potentially be intercepted on wifi though I can't really see why anyone would want to as the data would probably be pretty useless to them unless this was a specific attempt to capture Airplay streams and people knew what they were doing and had compromised your wifi security.
Good luck.
AC -
I want to use the same account for all my apple devices (macbook air, imac and iphone). I can't see how I can amend the iphone account because it is in grey? I also can't remember the password for this account so i can't even delete it and start again?
Help!
ThanksDeleting an iCloud account only deletes it from the Device, not from iCloud. In iOS 8, the name of this setting changed to "Sign Out" as that is a better reflection of what actually happens. Your iCloud data remains on the server, available to devices still signed into the account, but the device you sign out of the account on is disconnected from the account, and as a result, the iCloud data from that account is removed from the device. It will redownload to the device should you sign back into the account.
The only issue you'll run into when you switch between accounts is with my photo stream photos older than 30 days. When you delete (or sign out of) and account, your photo stream photos are deleted along with the other data from the account in question. However, unlike other data which remains on the server and can redownload to your device when you sign back in, my photo stream photos only remain in iCloud for 30 days. When you sign back in, you will only get back my photo stream photos added in the last 30 days (as older photos are no longer in iCloud to redownload). Like other account data, any my photo stream photos on your other devices signed into the account are unaffected by this. If you want to keep older my photo stream photos on your device as you change iCloud accounts, save them to your camera roll before deleting (signing out of) the account. -
I have lost my apple ID for my ipod, now ive got a new iphone and i want to use the same ID for both, can anyone one tell me how to do this? ( i no my ID for the iphone)
Just use the same ID.
These may alos help:
How to use multiple iPods, iPads, or iPhones with one computer
What is the best way to manage multiple...: Apple Support Communities -
I want to use wifi for Apple TV, but it doesn't prompt for a password, so never connects. What am I missing? Can I only use it via a non-password-protected wifi connection?
Hi - you might want to post this question on the Apple TV area - you would probably get a quicker response - if you have a specific question relating to Apple routers then post back here
-
Please help. My DS created a document under his login on my PowerBook and now, I cannot seem to access it. He doesn't have an email account of his own, I can't seem to save it as a public document in a drop box like I can from my own login and we do not want to use iwork. Is there a way to save it so that I can access it from my login to email to his teacher. I don't want to have to retype it into Pages under my login.
Save the document from his account to an external drive or thumb drive.
Set the permissions (using Finder > Get Info) for "Everyone" to Read and Write.
Your DS will likely be the owner of the file, so you may need his login password to change the permissions.
Regards,
Barry -
I have one apple id on my iPad and a second apple id on my iPhone and laptop. I want to use one apple id for everything. I tried wiping my iPad and synching it with my laptop. The old apple id still remains on my iPad. I can't get rid of it. Help.
On the iPad open Settings/iCloud and delete the account using the button at the bottom. Once deleted log in using the other account. For iTunes Stores use Settings/iTunes & Apps Stores, tapp on the Apple ID at the top then sign out. Once done sign in using the other account. Once you are happy with the changes plug your iPad into your computer to update the backup.
-
I recently upgraded from 3Gs to Iphone4 and want to use my old 3Gs as an ipod. how can i update
the user ID on the 3gs to a new one that I have as it is still showing a previous user ID?Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.
-
HP LaserJet 600 M601 doesn't want to use envelope feeder
1. HP LaserJet 600 M601
2. Windows XP 32-bit
3. Tries to print to different trays than envelope feeder when envelope jobs are sent to printer, eventually the envelope feeder shows up on the display and user can choose it to print. Then prints OK.
4. New printer.
5. HP LaserJet 600 M601 doesn't want to use envelope feeder:
Driver is configured with correct trays and printer with paper types.
User send a print job with paper size as Envelope #10 to printer, printer prompts for envelopes to be loaded in different trays, after Tray 2, and after Tray 1 then asks user to use the Envelope Feeder, instead of the just immediately printing to the envelope Feeder.
Tray configuration:
Envelope Feeder: Envelope #10, Envelope
Tray 1: Legal, Plain
Tray 2: Letter, Any Type
Tray 3: Letter, Letterhead
Hp LaserJet 600 M601 M603 PCL 6 driver version 61.114.1.10295
Firmware: 2131305_192069Just got off the phone with HP on the very same issue using a 602dn printer. What ended up fixing my problem was downloading the HP Universal Print Driver ( www.hp.com/go/upd ). You'll want the PS driver, not the PCL6 one. When you exctract it, update your driver to the v5.4 driver. I don't know why that would have fixed it, but it did. Let me know if it works for you.
Maybe you are looking for
-
Since downloading Safari 5.1 Google search engine no longer works
Hello, For the past few weeks I was having issues with Google as I kept receiving a "slow script" error. In trying to fix this problem I downloaded the latest version of Safari (5.1) from the Apple website to see if this helped. This seems to have ma
-
Hi All, I have a requirement for my users to provide them with screen shots of all the forms /reports in their new application. We call these mock-ups. They will review them possibly add a column or rename something. I have tried using "print screen"
-
It was pointed out that my links do not function correctly on Firefox on a Windows platform. When links are clicked, they do not fully display the NEW page until the mouse is moved! I have now observed it for myself on my fathers PC running Windows X
-
Hi All, There is a difference in bet ween GR55 and FS10N transactions from 2004 8th period now users asking us to find out the problem. is it possible to make wquel ? if yes yes then can some one gime an idea. we can not displaythat GL account 300000
-
Possible to run a photoshop script by selecting files in Bridge?
Hi, I have a good script I've written that I always used to run from Photoshop. The script has a dialog box which asks where to get the files from. Is it possible to select files in bridge and run the script from there? Without rewriting it for Bridg