WANT TO USE M1217 printer on fax server but modem driver could not find

Dear All
I want to install HP Laserjet M1217 MFP on Window Server 2012 r2 and Use on windows Fax and Scan utility.
but i think i need modem driver to use on this utility.
therefore i need assistance how can i use this dvice on Fax server.
best regards
Owais Farooq

Hello Owais Farooq,
The Windows Fax and Scan allow faxing with a Fax modem card installed on your PC, it does not allow using a such with the HP Device.
The HP M1217 allow sending and recieving faxes from the computer through the HP Software , not through the operating system software.
Regardless, the M1217 is compatible with Windows Server 2003 or 2008, it is incompatible with Windows Server 2012, as well any digital fax capabilities as faxing from / to the computer are only supported on a client operating system, not on a server.
For a server only basic print and scan drivers are available as you may find in the user guide of the printer:
http://h10032.www1.hp.com/ctg/Manual/c01760651.pdf
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

How to select my custom monitor calibration profile into Lightroom 5.7? I used i1 Display Pro to calibrate my monitor, I could not find or confirm that Lightroom is using my custom monitor calibration profile? Thank you very much.

How to select my custom monitor calibration profile into Lightroom 5.7? I used i1 Display Pro to calibrate my monitor, I could not find or confirm that Lightroom is using my custom monitor calibration profile? Thank you very much.

The monitor profile is set at system level. Lightroom will find it there and use it. You're not supposed to do anything, i1 Profiler will do it all for you.
Go here to confirm that the right profile is set as system default (Windows):

Clickinstagram is telling me to change my password and when i 'Forgot Password?' then 'reset using facebook' a pop up comes up saying 'We could not find any instagram linked to your facebook account. Try searching for your username or email instead'.

instagram is telling me to change my password and when i go on 'Forgot Password?' then 'reset using facebook' a pop up comes up saying 'We could not find any instagram linked to your facebook account. Try searching for your username or email instead'. but i forgot the the password to the email i used for it:/ help me!!

http://help.instagram.com/

Hadoop ODBC linked server error: Specified driver could not be loaded due to system error 182

Hi,
I am trying to connect to a Hadoop server through a linked server in SQL Server. I downloaded and installed the Microsoft Hive ODBC driver - HiveODBC64.msi. But while I am trying to create the Linked server using this ODBC driver I am getting below error.
" Specified driver could not be loaded due to system error 182 (Microsoft Hive ODBC driver, D:\....\HiveODBC64.dll). (Microsoft SQL Server, Error: 7303)"
When I tested it locally and in another server, it is working properly. I am getting this error only in this server. looks like a dll error. But cannot identify where/what is the error. Could someone help me fix this issue.
Server info:
OS Name: Microsoft Windows Server 2008 R2 Enterprise Version 6.1.7601 Service Pack 1 Build 7601
SQL SERVER: Microsoft SQL Server 2008 R2(SP1)

Hi LinkedServer,
According to your description, you want to create linked server to connect to a Hadoop server in SQL Server, and you have created it successfully in the test server, the problem is that you get the issue in the production environment, right?
Based on the error message, as you said it seems that the issue is related to the HiveOBDC64.dll assembly. Since you have done it on the test server, you can copy and replace HiveODBC64.dll to production server in the C:\Program Files\Microsoft Hive ODBC
Driver\lib directory. Or you can reinstall the Microsoft Hive ODBC driver. Here is a blog which describe how to create a SQL Server Linked Server to HDInsight HIVE using Microsoft Hive ODBC Driver step by step, please refer to the link below to double check
if your steps are correct.
http://blogs.msdn.com/b/igorpag/archive/2013/11/12/how-to-create-a-sql-server-linked-server-to-hdinsight-hive-using-microsoft-hive-odbc-driver.aspx
Regards,
Charlie Liao
TechNet Community Support

Could not find Simplified Chinese input method when using FormsCentral

Hi
When I creating files using FormsCentral, I could not find the input method of Simplified Chinese, therefore, the document I created look strange. The font is not what I wanted but I really could not find Simplified Chinese to edit the document. Could anyone please show me how should I do it or where I can download the font pack?

We currently do not support Chinese forms.
Randy

Have hp psc 1510xi all in one, i wan to know how to use this printer as fax

Hi, I am new to this forum, i want to know how can i use this printer as fax. this is psc 1510xi all in one.
Thanks
Nat

hi there,
could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I want to use Apple print to print a square book - using Aperture. How?

I want to use Apple print to print a SQUARE format book - using Aperture. How?

I want to use Apple print to print a SQUARE format book - using Aperture. How?
Not with Aperture. You have to use the new Photos for Mac, if you want to print a square book with Apple's Print services.
You could collect the images you want in the book in an album, export the albums a s a new Aperture library, open the album Photos, and create your book.
Or create a custom book in aperture, print the pages of the book to JPEG, import the jpegs to Photos and use them as full page photos to create a photo book in Photos.

Can I migrate from mavericks to mavericks server. Have tried using a hard drive but the but the sever does not find the migration backup when it's searches. Any help out there?

Can I migrate from mavericks to mavericks server. Have tried using a hard drive but the but the sever does not find the migration backup when it's searches. Any help out there?

Is the HDD in the 2009 15" MBP dead? (The original source of your data) If not, you might want ot take it out and put it in an enclosure.
You might try spotlight on know files to see if that gives you any clues where your data is located.
You might down load from the Internet OmniDiskSweeper (free) and open it. It should show you all of the files you have on your MBP and enable to locate them.
Ciao.

I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan

Hi Everybody,
I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan. How do I uninstall the Epson software and start all over again?
nickel_man_65

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

A lost my remote control for apple tv. I want to use my phone as a remote but the applications can' pair with the Apple TV device , how can I pair them without remote?

A lost my remote control for apple tv. I want to use my phone as a remote but the applications can' pair with the Apple TV device , how can I pair them without remote?

Setup for remote app: http://support.apple.com/kb/ht1947
Specifically:
Set up Apple TV (2nd and 3rd generation)
On Apple TV, select Settings from the main menu.
Select General > Remotes > Remote App. If Home Sharing isn't set up on your Apple TV, you should turn it on.
Apple TV (2nd and 3rd generation) uses Home Sharing to stream content from your iTunes library on your computer to your HDTV. If you connect your Apple TV to your iTunes library using Home Sharing, you can use Remote to browse and play content from any iTunes library in the Computers section of your Apple TV. You can also use Remote to select between available speakers to enhance your audio and video experience.

TS4002 I'm trying to create a new apple-id but when typing the email adress I want to use I'm told that the particular email adress is not allowed but when searching I can't find same being used. How do I find out where that particular email adress is use

I'm trying to create a new apple-id but when typing the email adress I want to use I'm told that the particular email adress is not allowed When searching I can't find same being used anywhere. How do I find out where that particular email adress is used so I can delete it there and use it for my new apple-id?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Also
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.

I use Lightroom 5 (update)on my PC. Now I want to use Lightroom also on my notebook but it has no CD-drive. Can you help me - Wilhelm Habermalz

I use Lightroom 5 (update)on my PC. Now I want to use Lightroom also on my notebook but it has no CD-drive. Who can help me - Wilhelm Habermalz

The easiest way would be to download the trial version, and then use your existing serial number to activate. Or, if you have already downloaded the update to use to update your original installation, you could copy the file that you downloaded to a flash drive and use it on your other computer.

HT1689 i have my daughters iphone 3, i want to use it as an i-pod, but it keeps receiving messages from some her friends is there a way to stop this from happening, please help, my phone is maxed out and would really like the storage for music, thanks

i have my daughters iphone 3, i want to use it as an i-pod, but it keeps receiving messages from some her friends is there a way to stop this from happening, please help, my phone is maxed out and would really like the storage for music, thanks

It sounds like it still has her information on it, so it might be efficient to navigate to Settings, then General, then Reset, then Erase All Content and Settings. You can then set up the phone again, using your information. This way the phone will be yours, officially, and her data and information will be removed.

I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this

I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this? I gace tried the System Preferences -> Sharing, shared internet to Ethernet, but can't se ethe device on Finder

Djembe wrote:
UEFI (unified extensible firmware interface) boot requires Global unique identifier Partition Table (GPT) as opposed to the older Master Boot Record (MBR). If your existing drive is formatted in MBR, you will need to adjust BIOS settings to enable legacy boot in order for it to work properly.
Is there a performance difference between GPT and MBR? If GPT is better, I do not mind formatting the drive with it.
5. No special drivers are needed.
Thanks. What about the thunderbolt port?
7. I think Lenovo estimates 6 hours.
Lenovo says 6 hours with the 6-cell battery on its website.
BrendaEM wrote:
Hi,
There was a serious BIOS/UEFI problem with that SSD . Perhaps this thread will save you some headaches. Someone is recomending shutting off Rapid Boot in the setup, which would probable mean little with a SSD, anyway.
I read through this, and it looks like the problem was fixed in a BIOS update, which I plan to do. However, it also seems like Intel Rapid Start is not even worth it in the first place, as sleep consumes almost no power at all.
W540: i7-4700mq, K2100m, 8 GB DDR3L, 512 GB SSD
T510: i7-620m, NVS 3100m, 8 GB DDR3, 512 GB SSD

I want to use the Thunderbolt connection for an external hard drive

I want to use the Thunderbolt connection for an external hard drive - so what port would I use on the MacBook Pro 13" for the display monitor. Thank you!

This is not the forum for MacBook Pro owners.
You just need to reformat the drive in Disk Utility and erase the drive and have Mac HFS.
If you did need to use NTFS then you would not want -3G but Paragon NTFS for OS X x. 10.0
Or buy something that isn't pre-formatted to Windows NT file system.
First though make sure you have backups of your system. TimeMachine being used now?
http://macperformanceguide.com/Mac-TimeMachine-drive.html
http://www.apple.com/support/timemachine/
Maybe cleanout some files you don't need.
Install a larger notebook hard drive even.
http://www.macsales.com/firewire has a lot of choice in Mac compatible drives and enclosures so you don't need to worry about Fantom not working at some point.
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard

WANT TO USE M1217 printer on fax server but modem driver could not find

Similar Messages

Maybe you are looking for