Want to use SCCM 2007 to image thinkpad 10 with windows 7

Hello,
can someone tell me if
SCCM 2007 can be used to build the thinkpad 10 tablet and if it can
can I deploy a windows 7 x64 image to it and it I can
where are the drivers as I can only find windows 8 drivers.
I have build a Helix successfully in the past with windows 7 but I cannot get the thinkpad to work, what am I missing?????
thanks
Nazir

Perhaps this page from Microsoft will help understand which versions of SCCM can deploy which versions of OS:
http://support.microsoft.com/kb/2909893/en-us
As for the ThinkPad 10, I believe it only supports Windows 8.1 so there will be no Windows 7 SCCM driver pack for it.

Similar Messages

  • Uninstalling programs using sccm 2007 sp3

    Hi there,
    We have imaged 300 desktops which have office 2007 preinstalled.  What we want to do is uninstall office using sccm 2007....my questions is that is this path possible??  Big question is can we uninstall a program that has not been deployed with
    SCCM???

    Hi,
    this is an example for MS Visio 2007 Professional but it is valid for all apps like Visio, Project, Office (2007 and 2010 Versions). The only difference is in the <Configuration Product="APPLICATION ID">
    line
    <Configuration Product="VisPro">
    <Display Level="none" CompletionNotice="no" SuppressModal="yes" AcceptEula="yes" />
    <Setting Id="SETUP_REBOOT" Value="Never" />
    </Configuration>
    This line in SilentUninstallConfig.xml file stops the client from restarting after an uninstall procedure.

  • Windows 7 deployment using SCCM 2007 SP2

    Hi,
    We planning to do Windows 7 deployment using SCCM 2007 SP2 so we have some queries regarding same.
    Is it possible to take entire HDD backup & restore using SCCM 2007 SP2? Also is it recommended to do so?
    What will be the effective method to deploy OS at remote branches?
    If we want to save the network bandwidth then what will way to send image to distribution point and client as well.
    Is it mandatory to have PXE boot enable in bios & set as first boot preference on each client machine for PXE initiated windows 7 deployment? If so then is there any option to enable PXE boot & set as first preference on client machine
    remotely?
    Is it possible to deploy OS in other than C drive i.e D or E to have dual boot option?
    Which we will be best method to have zero touch deployment without any end user intervention and why?
    Please help to clarify.

    As Jason said, these are the configurations that requires some high level skills to configure it, the answers are the same as said by Arnav... below links would give you a good heads up for the OSD in SCCM if you still want to try it on your own...
    http://download.microsoft.com/download/7/C/9/7C9A54AC-9661-48CA-9A7C-E3D2B5B23CF2/SystemCenterConfigurationManager2007OperatingSystemDeploymentGuide.pdf 
    http://blogs.technet.com/b/configurationmgr/archive/2009/07/27/a-step-by-step-for-using-osd-through-system-center-configuration-manager-2007.aspx
    https://blogs.technet.com/b/birojitn/archive/2010/01/20/windows-7-deployment-using-sccm-2007-sp2.aspx
    bluerail

  • Can I use SCCM 2007 to deploy SCCM 2012 Agent

    I was reading the scenarios for deploying the SCCM 2012 agent here
    http://technet.microsoft.com/en-us/library/gg682132.aspx
    I have been planning to deploy the 2012 agent using an SCCM 2007 deployment package. I am not migrating any data/packages/collections/anything from SCCM 2007. 
    I am looking for a sane way to deploy 2000ish clients a day for 2 weeks and be done. 
    I figure they are all SCCM 2007 clients so lets deploy 2012 agent using SCCM 2007.
    I read the following in the link above and it sounds like the way I want to go – use SCCM 2007 software distribution…
    Upgrade installation by using application management
    Upgrades clients to a newer version by using Configuration   Manager application management. You can also use Configuration Manager 2007 software  
    distribution to upgrade clients to System Center 2012 Configuration Manager.
    Then later in the same document there is this…
    How to Upgrade Configuration Manager Clients by Using a Package and Program
    You can use Configuration Manager to create and deploy a package and program that upgrades the client software for selected computers in your hierarchy. A package definition file
    is supplied with Configuration Manager that populates the package properties with typically used values. You can customize the behavior of the client installation by specifying additional command line properties.
    You cannot upgrade Configuration Manager 2007 clients to System Center 2012 Configuration Manager by using this method.
    In this scenario, use automatic client upgrade, which automatically creates and deploys a package that contains the latest version of the client.
    What???!??  There is no Automatic client upgrade feature in 2007 – so how does that even make sense?  In one section, it says I can deploy the 2012 Agent using SCCM 2007 software distribution, and then later in the same document, it
    says I can't.  I am probably misunderstanding somthing.
    Is it possible to make a package/program in SCCM 2007 that will make targeted clients upgrade to Agent 2012 and join the new SCCM 2012 Site?

    I tested this (deploying 2012 agent using existing 2007 SCCM infrastructure) with a few test systems at my desk and it seems to work pretty smoothly.  I made a package to deploy SCCM 2012 SP1 and added it to my SCCM 2007 Site.  Then I deployed
    the 2012 agent from 2007 and it worked great.  If it works this well in production, I will be able to migrate all of my clients in less than a weeks time. 
    I have not published the 2012 site information in AD - and I don't plan to.  We would have some overlapping site boundaries - and in 2012 it seems its unnecessary in a single site hierarchy.  I AM planning to use boundaries to assign
    DPs, but thankfully site and DP boundaries have been separated.  It works great to just specify the site in everything and not worry about auto discovery.  My clients don't move among sites since I only have one large site.
    Sorry that I somehow posted this same question twice, and thanks for cleaning that up.
     In my installation, I just called ccmsetup.exe with the following command line...
     /mp:myMP.mydomain.com CCMLOGMAXHISTORY=5 CCMLOGMAXSIZE=1000000 SMSCACHEFLAGS=PERCENTDISKSPACE;NTFSONLY SMSCACHESIZE=10 SMSMP=myMP.mydomain.com SMSSITECODE=CCM
    I am not sure that I need to specify the MP twice, but it is working to do so.  I'm also not sure whether the log and cache flags will be honored since there are existing settings from SCCM2007 agent.  I think that the 2012 install will not change
    these settings upon installation, but it does not appear to hurt the process to include them just in case it does work.

  • Deploy Java and Oracle updates using SCCM 2007 Software Updates

    Hi Team,
    I am using SCCM 2007 to deploy software updates on all my servers. Now i want deploy updates fro third party tools like Adobe, Java etc..Please suggest me on how to deploy these updates using SCCM.
    I am looking for other simple solution than SCUP 2011. Please suggest.
    Thanks
    Siva

    Hi,
    SCUP 2011 would be the way to do it or a package/program. There are commercial software solutions that plugins to configuration Manager like Secunia
    http://secunia.com/vulnerability_scanning/corporate/sc2012_plugin/ ,Solarwinds
    http://www.solarwinds.com/patch-manager.aspx and Shavlik
    http://www.shavlik.com/products/scupdates/ that offer a subscription of updates for these products for a cost of course.
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • Query to list computers with a specific network printer using sccm 2007

    Hi to all,
    I really need help to  create a report taht lists  all the computers which have a network printer "MAXXX" installed.I would like to do it using sccm 2007.
    Thank you in advance for your help.
    Regards,
    Stephane.

    CM07 does not collect this information, Printers are a user setting and therefore you will need to create a script to inventory the printer for each user then you can have CM07 collect & report on them.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Migrate Windows XP to Windows 7 in secondary site using sccm 2007

    Hi all,
    I have migrated Windows XP to Windows 7 using SCCM 2007 R3 SP2 in the primary site and a DHCP server is available. Now I need to do the same exercise to an XP machine in a secondary site but there is no DHCP server, all machines are configured with static
    IPs. Do I need to install temporary DHCP server there or I have other options?

    As mentioned, to my knowledge, there's nothing built in to handle this. You can try using the capture tasks as I mentioned but I don't think that they will preserve the IP all the way into the deployed Windows instance. For this, you will have to build
    some type of custom solution.A quick search of the web should turn up results:
    http://www.bing.com/search?q=osd+without+dhcp&src=IE-TopResult&FORM=IETR02&conversationid=
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • I have 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II.  How do I connect?  4000 only has 1 Display Port and 1 DVI.  5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute?

    I just bought a 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II.  How do I connect?  4000 only has 1 Display Port and 1 DVI.  5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute any work at all?  I read where on a PC they would work together, but on a MAC they do not.
    I read that Display Port has higher band width than DVI, NEC monitors for best performance they recommend using DIsplay Port.
    When I was setting this up I looked at a Nvidia Quadro 4000, unfortunately it was for PC, it had 2 Display Ports, in the Mac version they reduce it to one.  I did not think there could be a difference.
    Mainly want to use it for CS6 and LR4.
    How to proceed??? 
    I do not want to use the Quadro 4000 for both, that would not optimize both monitors, one DP and 1 DVI.  Using just the 5770 would work but I do not think the 4000 would be doing anything, and the 5770 has been replaced by the 5870.more bandwidth.
    Any ideas, I am a Mac newbie, have not ever tried a Mac Pro, just bought off ebay and now I have these problems.
    As a last resort I could sell both and get a 5870.  That would work, I'm sure of that, it's just that I wanted the better graphics card.
    Thanks,
    Bill

    The Hatter,
    I am a novice at Mac so I read all I can.  From what I understand the NEC monitors I bought require Display Port for their maximum performance.  The GTX 680 only has DVI outputs.  Difference from what I understand is larger bandwidth with the DP.
    You said I have the 4000 for CUDA.  I am not all that familiar with CUDA and when I do read about it I do not understand it. 
    A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000.  Is the 4000 doing anything with nothing connected?  I read where in a PC system the 2 cards would interact but in a Mac system they do not.
    Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
    So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
    I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are.  I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4.  Those NEC monitors are supposed to be top notch.

  • I want to use my Black magic Multi-Brigde Pro with Premiere. That is possible correct?

    I want to use my Black magic Multi-Brigde Pro with Premiere. That is possible correct?

    Hi PragueGolem.
    Yes, it's possible to use the Blackmagic Multibridge Pro with Premiere but it's also complicated to use the card with video and audio together.
    I use a mac pro with the Multibridge Pro 1 and need to use an audio card too, because the card makes always problems with audio in Premiere CC.
    In the audio hardware settings tab you have no selection possibility for the card. You have to select your standard system audio and to route this in Premiere. In your system audio panel you have the multibridge as standard card set.
    Only for a short time it was possible for me to use the card with audio and video but after the last Premiere update I have to use the audio card again. I spend to much time in optimize my system to work well with the card and heard to many people have trouble with Premiere CC and the Multibridge Pro Card. In Premiere Pro it wasn't a problem at all...
    Regards,
    Flo.

  • Can I back out 3.6.1 and install 3.6 instead? I want to use Azigo, but it is not compatible with 3.6.1.

    Can I back out 3.6.1 and install 3.6 instead? I want to use Azigo but it is not compatible with 3.6.1.

    Install Firefox Portable 3.6.22 to your hard drive for that website. <br />
    http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

  • I want to use my pc as a handsfree device with iphone 5. Is this possible?

    I want to use my pc as a handsfree device with iphone 5. Is this possible?

    If you had a Mac, you could get this & do what you want:
    https://itunes.apple.com/us/app/phone-amego/id405497904?mt=12
    Must be something similar for Windows.

  • ThinkPad W530 with Windows 8 x64 Pro BSOD when connecting to projector

    Nine, that only covers Widows 7. Many people in this thread have reported the problem using Windows 8. Has that been addressed by Lenovo yet? Stability problems like this should NEVER be allowed to go so long without a resolution.
    Edit Note : This thread was created base from the previous thread "ThinkPad W530 with Windows 7 x64 Pro BSOD when connecting to projector. As we currently Cx reporting facing the same issue on Win8 I have seperated this thread in order not toconfuse other customer. For cutomers facing this issue please continue posting in this thread.

    Hi shan_mcarthur,
    Thanks for posting. I read through this thread again and noticed that most of customers here do indeed have Windows 7 installed as what the title represented unless I'm mistaken or may have missed out are you or anyone else here facing the same issue on Windows 8. If that is the case I'll be more than happy to bring this up with the teams but it will have to be a new thread though as I'd like to keep the resolution separate based on the OS use just to not confuse other customer .
    For those facing the same issue above on Win8, please do let me know so we can start a discussion around this.
    Do let me know.
    Regards

  • Can i use the trial version of Photoshop CS6 with Windows XP - if so, where can i download it?

    Can i use the trial version of Photoshop CS6 with Windows XP - if so, where can i download it?

    Hi,
    Yes you can, please check the minimum system requirements: System requirements | Photoshop
    Here is the download link for trail: Download CS6 products
    Thank You
    Arjun

  • Lot of addons are not working even after uninstalling and reinstalling them. Using 3.6.12 version of firefox with windows

    I am using 3.6.12 version of firefox with windows OS. Recently, lot of addons not working and not showing in task bar like IE tab, RC Search, Answers, Better Privacy, AdBlock plus, etc. I have some 15-20 addons installed of which only 5-6 addons are working .Please help

    Update to 3.6.17 in the first instance by clicking '''Help '''| '''Check For Updates'''.
    The main reason for this is because there was a security breach at Comodo which is an SSL certificate provider recently whereby a number of fraudulent certificates were inadvertently issued. These allow a hacker to impersonate any site including online banking and the Firefox version you're running at the moment will not warn you that the site is a fake. The fraudulent certificates were blacklisted in v3.6.17 and beyond.
    See: http://blogs.comodo.com/category/it-security/data-security/
    It's not a good idea to install an ActiveX control in Firefox because you expose your machine to exploits which target that Microsoft technology. If you need to use Internet Explorer, then do that rather installing the IE Tab.
    You may find your other add-ons start working properly after you update Firefox, so do that first.

  • I am using Adobe Reader X on a laptop with Windows Vista OS and Adobe Reader XI on an older laptop with Windows XP OS.  While filling out the same form on each computer, I have found that I can save info on the older laptop, but not on the newer one.  Thi

    I am using Adobe Reader X on a laptop with Windows Vista OS and Adobe Reader XI on an older laptop with Windows XP OS.  While filling out the same form on each computer, I have found that I can save info on the older laptop, but not on the newer one.  This is a big problem.  I must be able to save on the newer computer.  Do I need to buy a new computer with a more up-to-date OS?  Please help.

    Adobe Reader X can only save reader-enabled forms. Adobe Reader XI can save all forms.

Maybe you are looking for