Want to view iMovie on Tv Through ATV2

I shot a video with my iPhone and made it into a movie. It is now in iTunes. I want to stream it to my TV but can't. It is my understanding that I can use Home sharing or Airplay. While I can access my iTunes library through the ATV2, it takes forever to load into the ATV2 (wants to load everything). Movies do show up as an option in the ATV2 but go on loading forever. Is there someone with the patience to give me a walk through on this. I know that I can stream directly from the phone to the ATV2, but that's not the issue. Also, I would like to know if that same move should be able to be streamed from my iMac to my iPad2. In general, how does one get selected items (or folders) from iTunes to the ATV2?

Since nobody else want to respond, I thought I might take a crack at answering your questions...
Movies do show up as an option in the ATV2 but go on loading forever.
This sounds like a connection problem—either a poor/weak connection or the TV2 device and content library not sharing the same network/sub-net.
Also, I would like to know if that same move should be able to be streamed from my iMac to my iPad2.
Yes, assuming the apps are properly updated.
In general, how does one get selected items (or folders) from iTunes to the ATV2?
I prepared a QT Quickie demo showing how I do this. The background clips is what is seen on my TV2 device and the insert in the upper, right-hand corner shows part of my monitor screen. Both clips were taken contemporaneously but owning to the 60 fps TV screen capture as opposed to the 24 fps monitor screen capture, they are not sync'd as well as they might have been. In any event, I believe it demonstrates the basics of sending content from iTunes on your computer to the TV device via Air Video and then returning it back to the computer.
QT Quickie: iTunes-TV Air Video Playback

Similar Messages

I want to view my photos through icloud on my laptop but im finding it hard to do it

I want to view all my photos on my icloud on my laptop but its not giving me the option, can u tell me how i do it or send me a link of some sort.thanks.

Are these photo stream photos? Also, are you syncing your laptop with your iCloud account?

TA21328 Safari will not display or open PDF files. Unable to view imovies

I resently had a new hard drive installed by the Apple store and they installed Snow Lepard which was my provious OS. I did restore all my files using My Passport Studio and everything what fine except for two things. I cannot open PDF files through Safari and I am not able to view any of my imovies.

If you have them, you might want to delete either or both of the below mentioned files from the following location “/Library/Internet Plug-Ins/” and install Adobe Reader or Adobe Acrobat again. Reader and Acrobat have preference items for whether to use them to manage PDFs in Safari.
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Do you have some iMovie project files in iMovie Events and iMovie Projects in your Home folder's Movies folder? Those might be where your "imovies" are. If you did have some, but don't now, then they may be the items you need to restore from a backup. Other than that, I'm not sure what you mean by "imovies", so can you include the steps you take to view "imovies" in a reply, please? Thanks.

Want to view all photos in an Event, at once

I want to view all photos, from an Event, at once without scrolling down. When we got this, I remember looking at all photos together. Now, if I want to click and drag to another page or to iMovie, it wont let me. I can't put in trash either. Is it possible to view all to decide which photos to put on a video/movie? I am frustrated with this and have searched help topics and so on.

BeeMa
Welcome to the Apple user discussion forums
It sounds like you may have changed the display to show a single photo - look in the lower right hand corner of the iPhoto display and slide the little slider there to the left to show more (smaller) photos in the display
LN

Viewing the discoverer reports through portal

How can i view oracle discoverer reports through portal .Suppose
i have portal page where i want to create few links on clicking
of which these reports are renderer on the portal.
What configuration is required for doing this ? i mean to enable
the discoverer view what steps are required and what url is
given .
Any suggestion will be of great help.
Neeti

Hi All,
We are also having similiar type of error in our portal.
com.sap.engine.services.prtbridge##com.sap.engine.services.prtbridge
#######SAPEngine_System_Thread[impl:5]_13##0#0#Error#1#/System/Server#Plain###
The cluster server element 125898350 is not added in the EP cluster context,
because prtbridge on 125898350 is stopped or not yet started
(maybe the server is starting or shuting down).
We have implemented the FPN using RRA.
This error comes only for few users when they navigate in Portal. After clearing the cache, it works for all. Kindly help us to resolve this issue.
Regards,
Venkatesh

I have just got an iPad and I want the music to be transferred through my iPod touch using iCloud but I didn't get the music from iTunes so I don't think it will let me do it. Do you have any tips that could help me?

I have just got an iPad and I want the music to be transferred through my iPod touch using iCloud but I didn't get the music from iTunes so I don't think it will let me do it. Do you have any tips that could help me?

Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings

Error on load: System.IO.IOException: The process cannot access the file : error in event viewer when users want to view documents from this third party deployed scan solution

Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
   at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adil

Do you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

When I open a document from a website in the browser a copy is saved automatically by download helper even if I just want to view.

When I click to view a word, excel, PDF or other file on a website I am presented with a window that says
"you have chosen to open ........etc What should Firefox do with this file?
Open with
Save file....."
If I choose the option "Open with" the file opens and I can view the file but the file is automatically downloaded and saved. I then have to navigate to the folder on my hard drive by right clicking on the item in the downloads window, selecting open containing folder and then physically deleting the file. If I don't do this then the containing folder saves the unwanted downloaded file.
Do I have a setting wrong/how can I stop Firefox/download helper from automatically downloading files I only want to view?

A new tab opens by default as a blank tab (about:blank).
If that isn't the case then an extension has changed that behavior.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I have a MacAir, mid 2011 model, and want to view video on my TV. I see that I need a mini display port to Hdmi but there are many of these. What exatly do I need and how does one view a movie downloaded to the MacAir on a TV screen?

I have a MacAir, mid 2011 model, and want to view video on my TV. I see that I need a mini display port to Hdmi but there are many of these. What exatly do I need and how does one go about viewing a movie downloaded to the MacAir on a TV screen?

Welcome to Apple Support Communities
That's exactly what you need. A Mini DisplayPort to HDMI adapter and a HDMI cable. See > http://support.apple.com/kb/HT4241?viewlocale=en_US
This is the only way to view a video on the TV. After connecting your MacBook Air to the TV, image on your TV should show immediately. Then, press Command and F1 keys to mirror your MacBook Air display, and open the video

Can't get it working - just want to view another desktop on my home network

I need to be able to view (not control) the desktop of my PowerMac that is connected to my Zoom DSL modem in another room. I want to view that desktop from my MacBook Pro connected wirelessly to the modem.
The PowerMac is running Mac OS X 10.3.9.
The MacBook Pro is running Mac OS X 10.4.11.
On the Zoom modem I've turned on port forwarding for port 5900 (is this necessary?).
On the PowerMac I have turned on Apple Remote Desktop in the Sharing preferences, and opened port 5900. On the MacBook Pro I have installed Chicken of the VNC, but it can not connect to the PowerMac. I can login to the PowerMac and share files using Mac OS X, and I can successfully ping the PowerMac with Network Utility. But when I try to port scan the PowerMac the scan proceeds for several minutes without finding anything (scanning the range 5900-5910).
When I try to connect using CVNC the error is "Connection Refused:Conect()".
I'm working at the very edge of my understanding of networking here. I'm really not sure about how I've done things, and I have no idea how to troubleshoot this.
Any suggestions? Thanks!

Okay, I'm going to answer my own question. I needed to update my ARD client to 2.1 to get this working. Latest is 2.2 so I may try that next, but for now 2.1 is working fine.

I have few PDf files on my computer and I want to add them to my ipod touch, please tell me the procedure on how should I do that? Secondly I want to run these Pdf files through the ibook app, as it also have the Pdf file sections

I have few PDf files on my computer and I want to add them to my ipod touch, please tell me the procedure on how should I do that? Secondly I want to run these Pdf files through the ibook app, as it also have the Pdf file sections

You should be able to just place them in your Books library in iTunes and check to ensure that your Book library is configured to sync to your iPod when you sync your iPod to iTunes.

I want to VIEW pdf files when I click on them (NOT save them) WITHOUT being asked everytime. I have already customized my firefox settings.

I have a hotmail email account and each time I click on a pdf attachment, Firefox asks me "What should Firefox do with this file?" I click "Open with - Adobe Reader (default)" then I check-mark "DO THIS AUTOMATICALLY FOR FILES LIKE THIS FROM NOW ON." When I check-mark that box a little line comes up beneath it that says "Settings can be changed using the Applications tab in Firefox's Options." So I also changed my application settings to "PDF - Use Adobe Acrobat in Firefox". Even though I have changed the application settings, and have check-marked the little box asking it to open with adobe reader automatically, Firefox still asks me each time I click on a PDF "What should Firefox do with this file". How do I make it stick that every time I click on a pdf attachment I want to VIEW it in Adobe WITHOUT being asked every time? Is there a way? Thank you!!!

Automatic actions are connected to a specific MIME type and if Hotmail doesn't send the file with a correctly recognized MIME type then the automatic action won't work.
*http://kb.mozillazine.org/File_types_and_download_actions
*https://support.mozilla.org/kb/Managing+file+types

TS2621 I have my data retrieval se to manual. When I get mail I get a popup on the screen for each and every e-mail asking if I want to view it or cancel and I have to cancel each one before I can resume any other actions on my ipad. How can I turn this o

I have my mail set to retrieve data manually. When I retrieve mail, I get a popup box for each and every e-mail message asking if I want to view or cancel and must either view or cancel each one before I can use other apps on the ipad. How can I turn these popups off?

Try reset iPad (not Restore)
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

I want to use iMovie 6 on my new MacBook Pro running Lion 10.7.5. It won't download. Can I download Snow Leopard instead and use iMovie 6 with that older OS?

I have a MacBook Pro I recently purchased 'cause my old G4 just couldn't output my video films properly. My new MacBook Pro is running 10.7.5 OS Lion. Don't like iMovie 11 and want to use iMovie 6. It won't download on Lion. Could I download Snow Leopard (deleting OS 10.7.5) and use iMovie 6 then? I saw a previous thread that said that could be done.

AppleMan...I have the same iMac you have...i-7 16GB with a SSD....just bought it second hand and it is about 1.5 years old....it was maxed out with upgrades when the original owner bought it. It was also restored back to factory settings prior to me taking possession.
I am making home movies in iMovie 11....max length 30 minutes or less. I am totally new to this editing. I am using HD footgage filmed from my Hero GoPro 3. I am finding that the movies that I am creating are skipping, staggering, hanging up etc...usually where I had transitions. I am certain I have enough power and memory in my iMac, so what's the issue? I read one of your other posts about optimizing each event or clip to 1080p? Is this what I need to do for every clip I import? Can I do this for all the clips at once on import? I also read that I may need to export the movie to quick time for smooth playback??
Any help you can provide would be appreciated!
Sincerely,
Matt
PS=How do I e mail you directly here in the posts? I went to your profile but didn't see any "e mail" or "contact" member button to click on.

Help! I want to view books/pdfs on my iphone 3gs!

It's so annoying to view books on ibooks. I have books in pdf format and I want to view them with ibooks but it's hard to read them because you have to scroll across the screen after each line to read the next. None of the settings for ibooks are fixing this problem. Is there another app that would help me? All I want is an app where I can read books in portrait mode so the text will be bigger and I can just scroll down. I'm not sure if I'm having the problem in ibooks because it's a pdf? Also, is there a way to give pdfs a cover. Some of mine do, but when I try to change it in get info, nothing happens. I've seen screenshots of ibooks and it looks like portrait mode is justified to the screen but it's not like that for me. Is this because they're pdfs? I hope that made sense! Someone please help me!

Have you tried GoodReader?

Want to view iMovie on Tv Through ATV2

Similar Messages

Maybe you are looking for