WANTED! bluetooth remote control...

Now that Apple has opened up the blue-tooth keyboard functionality, wouldn't it be really nice to have a tiny remote that had all the Play, Pause, Forward, Backward, Volume, and home buttons? Most notably the home button so that you can perform voice command. Wouldn't it also be nice if it was a detachable remote that can grip to the steering wheel so you don't have to look and try to touch the screen while driving? Here's another thought, what if the remote also contained a built-in mic so that you could initiate the voice command strait from the remote?

I took a look to see if Salling Clicker offered support. It is not listed among the tested configurations. You could, however post a message on the Blog there to see if someone else has had success or to make a request for future support.

Similar Messages

  • Nokia Bluetooth Remote Control

    Can someone suggest a Bluetooth remote control app that will work with a Nokia touch screen phone? I've tried Phone Remote Control with some success but its not fully touch screen compliant.
    Thank you in advance.

    Vectir - WiFi and Bluetooth Remote Control should do the job but since you didn't mention your phones model, i can't say for sure. You can check device compatibility on the Vectir Nokia Bluetooth Remote Control page.
    My friend uses this as a touch screen remote control on his 5800 Xpress music. I use in on my N95. Pretty slick app.

  • Bluetooth Remote Control Quit Working

    I have a new 8350i and downloaded the new 5.0.0.807 (?) version software. For some reason, after doing this, the ability of my Plantronics Voyager 815 headset to perform remote controls (answer, hang up, volume, etc) has quit working. Has anyone else had this happen to them? What can I do to correct this? Thanks in advance!
    Solved!
    Go to Solution.

    I thought I'd lost my mind with this phone.  I too updated my phone with the latest software and now I am having all kinds of bluetooth problems, I have the problem with the remote controls on my headset not working.  I have a problem where if I put the phone in the case while talking to someone it hangs up even though I have it set to NEVER do that.  The phone also is having major pairing issues with the two cars hands free radios I have, once the phone is paired to the radio, I can no longer listen to the car radio, I have to drive in silence, so I go back to the headset, which I cannot answer calls or hang up calls with.  I have pulled the battery, but that is only a temporary fix, it starts misbehaving within a day or two, tops.
    I used to love this phone, now I am nothing but frustrated with it.
    If anyone hears of a solution that works for more than a day, please post what you did.
    Thank You

  • Capturing events from a bluetooth remote control

    I purchased a Fujitsu Remote Control RC900 and installed it on my Windows 7 computer.
    Now I try to capture the remote control key events in a Java application.
    I can catch some events as keyboard events (such as "Enter" or arrow keys) but for many keys I have not found a way to catch any event.
    Still, some media applications can recognize the events.
    I also tried listening mouse events with this swing tutorial class
    http://docs.oracle.com/javase/tutorial/uiswing/examples/events/MouseEventDemoProject/src/events/MouseEventDemo.java
    But no success. Any ideas?
    Is there any remote control event framework for Java, apart from keyboard or mouse events?

    In short - never listen to low-level events from editorComponents (low-level meaning everything below - and most of the time including - a editingStopped/editingCancelled of the cellEditor). Your problem belongs to the model realm - save if a cell value is changed - so solve it in the model realm by listening to event from the tableModel and trigger your business logic when you detect a change in that particular cell value.
    Greetings
    Jeanette

  • Is it possible to hide Accessibility Voiceover Cursor when connecting to Bluetooth Remote Control in Keynote presentation on iPad?

    Hi team, I would like to know
    When I use my Satechi Bluetooth pointer (linked in Accessibility mode) with keynote on iPad there is a box around the items in my slides. Is there a way to remove this box?
    like these comments on this video
    https://www.youtube.com/watch?v=-c3Fw9m7UuY&list=UUajGeviMMa-piNbYJehhFmA&index= 3
    I didn't get any of those boxes for 2 years but if I remember well it just started to appear after either upgrading to Ios8 or updated Keynote, can't recall exactly.
    Any idea on how to solve this?
    Thanks so much for your time and help in this!
    Max

    Anyone with the same issue?
    have a great day
    Max

  • Bluetooth remote freezing with PowerPoint on MacBook Pro while idling

    I am experiencing problems with bluetooth remote controls (3 different brands) freezing up when used with MS PowerPoint on a MacBook Pro running Snow Leopard (all updated). It is intermittent in nature and appears to be related to idling when giving presentations. It can freeze as quickly as within one minute to not freezing until 30-40 minutes later. This may not be a remote control issue as the arrow keys on the keyboard will not advance or backup the PowerPoint slides as well. However, when using my iMac computer without the remote, I have not observed the freezing (although, I may not have waited long enough since the nature is intermittent and variable in time).
    When frozen, the mouse centered on the slide with a touchpad click awakes the computer to work properly (quick, but not ideal solution). However, when two screens are utilized (LCD projector or another monitor) via VGA connecion in "Presenter View," the touchpad click does NOT awake the computer, regardless of where the arrow is placed on screen. During this situation, the "presented slide" can be advanced by clicking the forward and backward arrows below this "subwindow" of "Presenter View," and even clicking on the image itself will advance it forward (but not backward). When this happens, the keyboard arrows do not work in advancing or backing up the slide sequence.
    When in this frozen mode with a LCD or 2nd monitor, the only way I have found to get it working again, is to "Exit Show" and pulling down the "Slide Show" tab and selecting "Play from Current Slide." This takes me back to the slide where the computer froze and allows the bluetooth remote to start working again (obviously not an optimal solution, as the software should not disengage). Again, it appears if I keep changing to another slide within a few seconds to a few minutes, the PowerPoint does not freeze up. However, it is intermittent and variable as to the length of time before it freezes up.
    NOTE: I have run these same PowerPoints, with the same remote controls, without any problem for hundreds of hours over the past 3 years. I have updated MS Office 2011, from 2008, last fall and have also run these same items without problems for about 40 hours. I have run Mac "Disk Utility" and just installed a MS Office "Update" released yesterday, which has not corrected the issue as well. Is this issue a MicroSoft problem?
    Bless whoever who has an answer to this complex situation. Thank you!

    I am having the same problem with a minister's MacBook Pro at my church.  It started about 2-3 weeks ago.  We at first thought it was a remote issue and found out that it is not.  He is running a vitually new MacBook Pro with Mountain Lion 10.8.2 OS.  He has Microsoft Office 2011.  He has only had the computer since December.  He runs powerpoint presentations all the time.  He never had a problem until about 2 1/2 weeks ago.  When he runs powerpoint in Presenter Veiw it would freeze up on him.  You can still move the cursor over to the arrows on the presenter view slide windo and phisically click the mouse on the arrows to move forward or backward but none of keys on the keyboard work at all.  It won't even let you escape.  You have to move the cursor over the "Exit Show" button and click there.  We thought that it might be just a presenter veiw issue so we tried running it in "Mirror Mode" and that seemed to work for a while but now we are having the same freezing problems. 
    We have taken the laptop to the Genius Bar and talked to the guys there and they did not tell us anything that helped us.  They found this thread that you all started with our same problem.  It looks like all of us had it happen at the same time.  I find that very interesting.  My minister said that he had not run any updates so we don't think that was the issue.
    I have tried uninstalling Office completely and reinstalling it with all the updates and that did not help.  I was thinking that I have a copy of Office 2008 here in the office and I was going to uninstall 2011 and install 2008 but one of you said you were having the same issue with 2008.  Maybe I can uninstall 2011 and reinstall it without doing any updates and see if that does anything.  We are very baffled and can't seem to get an answer about any of this from Mac or Microsoft.  All we get is one blaming the other.
    Let us know if this is helpfull or if you have any luck.

  • Executive Remote Control options...

    Hi,
    I have executive presenters who will want a remote control to move forward or backward in their presentation... but, I don't want them actually switching the slides themselves...
    Do you know of a device on the market that is a remote control, but the remote activates a FORWARD or REVERSE arrow or light? the lit up arrow will be in the control booth and an operator can move the slides appropriately...
    thoughts?
    thanks in advance.
    -Steven

    I can't think of any Apple device or Keynote control that would do this, but what you're looking for sounds like a wireless light switch. I just found this, as only one example: <http://www.adhocelectronics.com/Products/Wireless-Lighting-Control>

  • View Only In Remote Control

    Hi to all
    I want give view only permission to a help desk for only view on all computers but i want  use remote control with full control premission to all computers.
    is it possible by policy or every way?

    It's not possible via a ConfigMgr client policy, because the Remote Tools settings are device settings and not user settings. So you can only configure on a device level what access level the connecting user will have.
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • A lost my remote control for apple tv. I want to use my phone as a remote but the applications can' pair with the Apple TV device , how can I pair them without remote?

    A lost my remote control for apple tv. I want to use my phone as a remote but the applications can' pair with the Apple TV device , how can I pair them without remote?

    Setup for remote app: http://support.apple.com/kb/ht1947
    Specifically:
    Set up Apple TV (2nd and 3rd generation)
    On Apple TV, select Settings from the main menu.
    Select General > Remotes > Remote App. If Home Sharing isn't set up on your Apple TV, you should turn it on.
    Apple TV (2nd and 3rd generation) uses Home Sharing to stream content from your iTunes library on your computer to your HDTV.  If  you connect your Apple TV to your iTunes library using  Home  Sharing, you can use Remote to browse and play content from any  iTunes library in the Computers   section of your Apple TV. You can also  use Remote to select  between available speakers to enhance  your  audio and video experience.

  • Apple remote controls  TV when I want it to just control Macbook

    Hello all,
    I have searched everywhere and could not find an answer to this problem.  I have an Apple TV 2 and I have the remote that came with it.  I have that remote (silver) controlling the TV just fine (and only the TV).  However, read carefully now, I have one of the older controllers (white) and I want it to control my Macbook ONLY.  The white controller controls both the TV and the Macbook.  When I go to settings on the Apple TV to unpair the white remote, all that does is unpair the silver remote.  Any help would be greatly appreciated!  Thanks!

    Pairing a remote to a device ensures that that remote is the only remote that will operate that device (that's not the same as that remote only being able to operate that device). If the remote that operates the Apple TV also operates the MacBook, you need to pair the remote that comes with the MacBook with the MacBook.
    Take the remote, hold it close to the MacBook, hold down the menu and forward buttons down together for 6 seconds until the display displays the paired symbol.
    Do the same with the remote for the Apple TV (but point at Apple TV), if you want your Macbook remote to only control the Macbook.

  • I have the new iMac with OS X 10.8.3 i want to conner it with apple remote control i don't know how

    i have the new iMac with OS X 10.8.3 i want to conner it with apple remote control i don't know how

    I have a Mac Book Pro 2008
    I have my MBP paired with Apple TV  and use it all the time
    My only complaint is that when I use the Apple TV remote it sometimes turns things off and on in iTunes.
    Besides all the options from Apple TV I can listen to anything on my mac over my TV surround system thru Apple TV

  • Can I make pictures with iPhone5S by remote control, say bluetooth? Or by the remote controller for App TV?

    Can I make pictures with iPhone5S by remote control, say Bluetooth ?  Or simply by the remote controller of App TV ?
    Thanks for the advise :-)

    There's this app:
    https://itunes.apple.com/us/app/wifi-camera-wirelessly-connect/id374351996?mt=8
    I know nothing about it myself, so I can't vouch for how well it works. There may be other, similar apps available.
    Regards.

  • Remote Control Wanted for a B540

    Having problems finding my remote control since I sent my machine back for repair, so I'm asking if anyone has one for sale ?

    hi Buckie,
    If you need the remote control to use with the TV Tuner, you can get one on this website.
    Hope this helps
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Want to buy slim remote control for Satellite A500-17X

    Where can I buy a slim size remote control for my Satellite A500-17x?

    Is your Satellite designed to work with remote control?
    I ask this because it is not known to me that you can use remote control as additional option for notebooks.
    Either is notebook delivered with remote control or certain model is not designed for it.
    Have you checked notebook specification?

  • Looking for remote control App (iPhone) to use with iMovie

    I just got a Macbook Air, and my infrared Apple remote control doesn't work with it.
    I wanted to be able to do presentations (in this case using iMovie) and be able to have a remote so that I could pause, go back, fast forward, i.e. the usual things a remote does.
    There probably is a good App that I can install on my iPhone that will let me use my iPhone as a remote control, but I don't know which one. Any suggestions????  Ideally, it would be a bluetooth program (although Wi-Fi would work too) that would also work with other programs, like Keynote.
    Thanks!
    Dan

    Well, I don't know much about this, but if you need to control the actual system in some way, you are going to need to use JNI (Java Native Interface), which is essentially embedding C/C++ code in your java app, which doesn't lend well to platform-independence. I too develop on a Mac, and there is a mailing list for Java related issues on the Mac. You can check it out at: http://developer.apple.com/java/
    If you sign up for ADC (Apple Developer Connection, it's free), you can have access to these mailing lists. They've been quite helpful to me in the past. I don't mean to slam the forums here, but you are looking for a Mac specific solution, and you'd probably get more specific information on this mailing list. Hope this helps!!
    James

Maybe you are looking for