WANTED: Digital I/O Mod

Anybody have one they're not using? It's the dongle with a /8" mini-plug and a black and yellow-green dongle that has 2 coax and 2 toslink connectors. I "misplaced" mine and I now need it.... it came with my Optical Digital I/O 2.
Help!!!

You'd need to connect the SPDIF-out on your DVR/Xbox to the SPDIF-In on the Digital I/O module, and unmute the digital-in on the mixer and the sound will play through the computer speakers. However, your card cannot decode DD/DTS signals, so it would be stereo or upmixed (i.e. "fake" ) surround.Message Edited by HSE on 07-06-2007:00 PM

Similar Messages

Macbook stuck in headphone (optical digital-out port) mode. Plugging and unplugging headphone jack no help.

Stuck in headphone (optical digital-out port) mode. What do I do? Plugging and unplugging headphone jack no help.

Do you see a red light in the headphone jack?? If you do, then the microswitch is stuck and you need to turn it off. Try poking it with a toothpick.
If you don't see a red light, then try resetting the SMC and PRAM and see if these helps. Here are the links.
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379

I want to make invisible mode ffield (Version) in the transaction code MD61

I want to make invisible mode ffield (Version) in the transaction code MD61.
Can anybody tell me how to do it with coding.
Thanks

Refer the thread for details about coding-
BAPI_REQUIREMENTS_CREATE
Reards,
Amit

I want to stop erase mode, pls help me?

hello, i want to stop erase mode, pls help me?

Do you mean Erase Mode through Find my iPhone? If so, there is no way to stop it. When it is finished you will need to restore your device using your latest backup.

IQ 790 want go to sleep mode

Hp Touvhsmart PC IQ790 UK want go to sleep mode, any help?

When a pc won't go into sleep mode, it's usually because a piece of the hardware is set to wakeup. You need to go into Device Manager, look at all the properties on everything like the monitor, adapters, everything, find the checkmarks for wakeup and just uncheck them. That's usually the problem. Also, go into Scheduled Tasks on your pc and see if something is scheduled by some software to perform an action at a certain time. This, too, can keep it awake.

FlexiJack Digital I/O Mode L

I cannot get the FlexiJack to stick in the Digital I/O mode following computer re-boot. The Digital I/O still shows that it is selected but the only way to get it to work following computer re-boot is to unselect it and then re-enable it. Has anyone else experienced this problem and if so what is the solution?I have all of the latest updates installed.

http://forums.americas.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=47232
2'nd last post (from Cat @ Creative)
Edit: Appears the link in the referred to post isn't working, was yesterday.Message Edited by johnston2 on 0-20-2006 06:44 PM

Z77 MPOWER want boot in standard mode

hello
My computer juste crached by it self, and wen i tried to restart it again in want to boot and i get A2 code in a black screen i cleared the cmos many times and switched to the other cmos but same think, after a half day of frustration i pushed the oc genie button and tried to start it and its boot i dont understand why it want boot in standard mode its bizard

ok i updated my signature, i hope u can help me because its my first super build Pc if i have bad experience with msi mobos i ll never buy them again, my pc is working with oc genie mode activated now and wen i deactivate the oc genie button its wont start and get in loop reboot

X-Fi XtremeMusic with Digital I/O mod

Hi,
I have acquired a Digital I/O module and am trying to have it output stereo sound to my speakers.
I have connected one end of a coaxial cable to the DIO module and the other end of the coaxial cable to my speakers' digital input coaxial port. These speakers are by Altec Lansing and the model number is ADA-885.
My speakers operate in a few modes: Stereo, StereoX2, Pro-logic, Quad (4.) or DD5. decoding mode. It has three inputs:
analog FRONT
analog REAR
SPDIF digital in (either PCM stereo OR DD5. bitstream)
In addition to the digital connection, I have connected the analog ports of the rear speakers to lineout#2 on the soundcard. This is so I can get 4. surround sound for games.
This configuration has worked for me previously on an SBLi've soundcard with the daughter card where the digital output is.
In gist, I am getting FRONT stereo through digital connection and REAR stereo through analog. I have the speakers set in Quad (4.) mode.
I have read that the DIO module only outputs either PCM STEREO or DD5./DTS bitstream so technically, this should not be a problem as (at this point in time) all I want out of the DIO module is to provide PCM stereo and/or DD5. bitstream to my speakers.
Herein lies the problem. Using the Console Launcher's Speaker config utility, I do a speaker test. The front channels are fine, with sound coming only from the front speakers. But as I get to testing the rear channels, I hear the test sound coming from the front speakers as well. (i.e. When testing REAR LEFT, I hear "REAR LEFT" coming from the rear left speaker as well as the front left speaker. Same thing goes for the REAR RIGHT channel.)
I disconnected the analog rear connection and tested the speakers again. The front channels are fine but the same thing happens to the REAR channels. They are heard from the front speakers. Shouldn't the REAR channels not be heard at all since the analog rear connection has been severed?
This did not happen with the SBLi've (I have the very first model of SBLi've with the daughter card. It is not a Li'veDE5. or anything else).
EDIT: Whoa..it gets worse. Now I find out that the REAR channels are reversed. The "REAR RIGHT" channel is heard on the REAR Left speaker and vice versa. What's going on!?
SmithyJMessage Edited by smithyj on 07-3-2006 :6 PM

Hi Catherina,
I do not have a Logitech webcam and have never owned one. The problem with REAR channels being reversed was resolved after uninstallation of the X-Fi and subsequent reinstallation. I use the CD that came with the card and install the normal package plus the Volume Panel. After that, I install the latest drivers from the Creative website. (not the BETA drivers)
Oddly, when I uninstalled it the first time and then reinstalled it using the CD (before installing the latest web release), the REAR channel was mapped correctly to the REAR speakers only even with the digital connection in place. The problem came back after I installed the web release.
However, the problem of the REAR channel being heard from FRONT speakers still persists even after I have uninstalled the X-Fi and reinstalled it from scratch multiple times. (with or without installing the web release)
SmithyJMessage Edited by smithyj on 07-5-2006 09:48 AMMessage Edited by smithyj on 07-7-2006 02:59 AM

Dolby Digital to stereo mode???????????????

Hey ,when i watch movies i have dolby digital surround but when i play music its also in a dolby surround and i want it to be in sterteo mode. it seems to have stuck in dolby digital mode ,How di i change that,heard you can download something so you can deside? for yourself,but dont know where to do that,please help

# Hey guys! Any updates on this? I also have SB Titanium Pro PCIex card and digital-in works only in stereo mode. There's no "decode" tab in creative audio console.
Looks like Creative forgot about us, the Titanium card owners.
I need to decode Dolby Digital 5. from my Xbox360 through digital-in to analog speakers on Windows 7 x64. Any help is appreciated

Want to hide or mod FCP 6 Splash Screen

Just want to hide the splash screen on my FCP system. I rent it to indy projects and I want to protect my serial. How can I access the Splash Screen Image? I've been able to mod the splash screen on all the other apps on the rental system but can not find or get to the Splash Screen for Color and FCP 6. I know that a real hacker can find my serial some how but I am not trying to block those geniuses. Just the lazy ones that are willing to go as far as copying or screen grabbing my Splash Screen and or About Screens to get a working serial. I know how to mod the Splash Screen to hide my serial and how to hide the app so the user can't get to the splash screen. I just don't know where the splash screen file is. I've read that it is in the .nib files? I just wanna hide my serial. Don't care if I mod it myself or install an app that does it for me. Any apple people or anyone else know what I can do to protect my product. I've also been told that the splash screen does not display the full serial but it soo totally does. Hey apple, please add the ability to hide this splash screen. Perhaps with it's own password to unlock and show again? OR, make splash screen hiding a universal ability in the OS. That would be sweet! Anyway,... ideas?

Hey all. I have been able to mod the splash screen on all the apps in FCP Studio 2 except for FCP and Color. The other studio apps Splash Screens access a .psd file. The only files I've found in Color that seem like they might be the splash screen files are ft_splash.Isi, ft_splashEDU.Isi, ft_splashNFR.Isi and ft_splashVOL.Isi
How do I open a .Isi file? If I can figure that out I can hide the serial number for Color but it still leaves FCP. Why do apps show the serial on the splash screen at all? What purpose does this serve?

Complete newbie wanting to add kiosk mode...

Hi.
I need someone to hold my hand!!!!
I am making a website and I am a composer. I want to disable the ability to drag and drop the audio from my site as well as lose the save/save as dialogues from the quick time menus. I have found that adding kioskmode will do this, but it means writing some code into my site.
I have tried writing code in to place statcode, but can't get it right.
I don't understand what stage you write the code in. Do you write the code, then publish the pages, or publish the pages then edit the code?
I tried to edit the .html pages with text.app, but although i could view source code, it was like looking at someone else's site, in that i couldn't edit the code. It just made a pinging noise if i tried!
So how do i add this kiosk mode - how do i edit the code?
David Tobin

Publish your page(s) using iWeb.
Open TextEdit and then its preferences.
Change to "plain" text and to "ignore HTML".
Open the published .js file for the page (found in the blah_files folder).
This is where you edit code and save your changes.

SB0358 and the Digital I/O mod

Will the digital i/o module work on the Audigy 2 ZS that comes with the Dell (see subject for product code). I just set up a 65" plasma and want to connect my computer via coaxial or optical to my sound system. I just picked up the Yamaha RX-Z9 and want the best possible sound. But on the web page it states that it will not work with any other card. I figure that this is a value card as it is sold with the Dell, but would like to make sure before buying the $5 device and then not being able to return it.
Thanks,
Mario

marioa35 wrote:
Will the digital i/o module work on the Audigy 2 ZS that comes with the Dell (see subject for product code)...
This is where you said that you have ZS Dell if you don't remember. I have checked the knowledgedatabase here: http://dmzweb3.europe.creative.com/w...list_audio.htm and your statement about the card type was true.
Then I have checked the Digital I/O requirements http://us.creative.com/products/prod...55&product=780 and there was stated:
Works with the following Sound Blaster cards:Sound Blaster? X-Fi?, Sound Blaster? Audigy? 4, Sound Blaster? Audigy? 2 Value, Sound Blaster? Audigy? SE and Sound Blaster? Li've!? 24 bit
So your card wasn't on the I/O lis of compatible cards.All this took 3 minutes, not 4 hours like you said. You are upset because I asked if you bothered to check the basic facts like this before you come and ask the question? Especially when 2 posts down from yours (at the moment of posting) was the same question? To bad... I told you the answer, but I am not paid to be "nice" to you.
Then you decide that my tone is "condescending" and "against the rules"... I bet you didn't read the rules either. How about your comment about my spelling? How you call that?
Since you have trouble spelling I will wait for a better answer.
Anyway good luck with finding help in life if this is how you react.
Message Edited by SoNic2367 on 09-2-2006 06:29 AM

MSI Gaming App Not Working - Fails to open after install - Want to use OC mode

Hi, well today I just recovered my GPU from a near fry using MSI Afterburner. Luckily, with help from a moderator on this site, I was able to get it working again. I thought I fried it trying to OC it. I simply want to be able to switch between the modes it is supposed to come with. I have a MSI R9 290, and it is supposed to be equiped with 3 easy "one click" toggling between OC modes, 1007MHz, Gaming mode, 974MHz, and Silent Mode, 947MHz.
I cannot figure out how to switch between these modes. I used Afterburner and nearly fried my card. I was told not to use that, that is for advanced users, to use instead the (supposed to be bundled, but was not included in my install) MSI Gaming App, to easily switch between the 3 different modes. I downloaded the MSI Gaming App (http://download.msi.com/uti_exe/gamingApp.zip) and installed it. When I tried to run it I get this error:
======
[MSI Gaming App]
The platform does not support this application
(OK)
======
So what does this mean, that the Gaming App is not supported by Windows 7 64Bit Professional (which is what I have)?
Am I doing something wrong, did I install the wrong application. I could not find any others however.
So I damn near fried my GPU trying to use Afterburner to OC my GPU, and I am very hesitant to try using it again. At this point, I have not even reinstalled Afterburner as I fear it might, just by installing, screw me up again.
What should I do, is there anything I CAN do?
Please help this noob- Thanks for your help!
-Kris

based on S/N the card is generic, AMD reference one
those cards don't have factory OC:
http://www.msi.com/product/vga/R9-290X-4GD5-BF4.html#hero-specification
http://www.msi.com/product/vga/R9-290X-4GD5.html#hero-specification
http://www.msi.com/product/vga/R9-290-4GD5.html#hero-specification
http://www.msi.com/product/vga/R9-290-4GD5-BF4.html#hero-specification

Sound Blaster X-Fi Xtreme Music & Creative Digital I/O Mod

I have a Sound Blaster X-Fi Xtreme Music and I am told by the USA Creative website that I can attach a Creative Digital I/O Module (see link below). What I want to know is, will the optical output on the Creative Digital I/O Module produce a stereo, 5., 6. or 7. output? Or even all of these?
link to Creative Digital I/O Module:-
http://www.soundblaster.com/products/product.asp?category=&subcategory=6&product=780Mes sage Edited by andy030798 on 0-08-20072:28 AM
Message Edited by andy030798 on 0-08-20072:28 AM

Hi Andy,
It depends on the source. On an optical output, you'll get multiple channels through if it's an AC3 source, such as the audio from a DVD. Other/normal audio will only come through as a stereo PCM signal though, so you'll only get 2 channels then. Check this sticky thread for some more detail:
http://forums.creative.com/creativel...message.id=270
Cat

Want to see debug mode thru background process

I am excuting a job in background mode...with start immdiately.
and its triggering a functionmodule.I wan o know what valuehave been passto the function modul.and I want to ee the function modul in debug mode.
There is no way to process the job in foregound and I am running th dunning through F150.

Insert an endless loop with a condition that will never occur inside your code.
like
a = 5.
while a > 1.
a = 5.
endwhile.
This keeps your job to be in Running status in SM50.
Chose this process and chose from menu Program/ Session->Programming->Debugging.
This starts the debugger.
In the debugger, you can change the value of a to break the endless loop. and continue debugging.
Regards,
Ravi

WANTED: Digital I/O Mod

Similar Messages

Maybe you are looking for