WANTED! L.G. Phillips Main Board out of 22" Cinema Disp.

I have a 22" Clear Acrylic Cinema Display. The inverter board went bad so I got one and installed it. It woks fine, I now have a backlight. However, in the process I managed to break the little (miniature) white hold down tabs on the digital main board. They must have become brittle with time. They break off very easily. It's NOT the main board (in the middle) that the power and signal go into but there is another board (on the far right side) that has (2) ribbon cables top & bottom that I assume create the video signal. Anyhow, I Googled this board and found only ONE on the whole internet and it is in Liverpool England. I don't want to order/buy that far away.
Does anyone have a broken 22" or 23" cinema display that may have a good video board with known good ribbon cable clasps.
Below are the specs I have found:
This LG Main board comes from a 22" Apple Cinema Display with a native resolution of 1600x1024. This board screws into the frame behind the LCD.   Product Number: LM22OW1 Control, P/N: 6870L-C016F.
I have a picture of it but can't seem to put it in this post.

Bump
Am I in the wrong forum topic?

Similar Messages

Blown 23" Cinema Display -- main board? or Inverter?

I bought an Apple OEM Nvidia Geforce 3 for my G4 Cube, and the idea was that it should power my 23" Cinema Display (clear). But the monitor became blown when I connected it to an incompatible video card -- although the power light comes ON, the screen fails to illuminate.
I'm hoping that someone can contribute to a diagnosis of my Display's problem. Here is the situation:
The online Authorized Reseller "The Mac Support Store" sells various parts for this monitor. There appear to be two choices:
1) The main board for the 23" Cinema Display is offered here:
http://www.macsupportstore.com/product.asp?pf_id=922%2D5582
and...
2) the inverter board is offered here:
http://www.macsupportstore.com/product.asp?pf_id=922%2D5581
But which one should I buy?
I realize this is pretty lame, inviting a stranger to diagnose a monitor he's not seen, but... you never know. Maybe you know what you're talking about. You probably know more about it than I do.
Is there a good reason for suspecting that the blown Display is the main board? Or the inverter board?
Thanks.

Hi,
I don't know whether this will be of help but last year I started having all sorts of problems with my 23" Cinema Display. I replaced the power supply 'brick' - but still had problems (blank screen etc) - read lots about issues with these displays. I was running 10.4.11 - In the end I tried re-installing the system on another drive up to 10.4.8 - and it's worked fine ever since (it also cured a number of other weird problems) - ok, so I can't get the latest itunes software - but at least I have a screen that works. It seems that anything above 10.4.8 causes problems on my G5 Dual Power PC.

I need to get photos off a water damaged iPhone 3GS. Can I take out the component that has the photos (is this the main board?) and put it into another of the same phone to retrieve the photos? Please help

I need to get photos off a water damaged iPhone 3GS. It spent time underwater, saltwater. I let it dry for a week, turned it on, the apple symbol came on, then it died. I need to retrieve my photos off it. Can I take out the component that has the photos (is this the main board?) and put it into another of the same phone to retrieve the photos? Please help

You're talking about the logic board. The two most likely things to get toasted, with water damage, are the battery(it shorts out), & the logic board. The worst water damage would be salt water. I'm afraid your logic board is toast.

Listing folder from a main board connected by serial port

Hi
I have a main board, I connected it serially and accessed it by VISA application and I have managed to write to and read from it.
My problem is how to list the folder from the board. There are many files in every folder with different file format.
Any help will be appreciated

It is advanced embedded board, it can be counted as a storage device. We are aiming for friendly LV user interface for the customer to view the file stored on it.
And farther we want to list the files, and might add:
loadapp                       (load application loader file)
loadmax2                    (load and program the Max2 using jam stapl)
reboot                         (reboot the blackfin)
boot <filename>        (boot an application)
flashapp                     (program the loaded application loader file to flash)
setboot <filename> (tell bootmanager which application to boot on startup).
unsetboot                  (reset the application to boot).
setmac <address> (ex. setmac 01:f0:cd:45:1f:2a).
setip <address>        (ex. setip 192.168.0.150).
dir                             (list all files).
settime                      (ex. settime 12:04:01).
gettime                      (print out time).

IPhone 6 serial number on main board ?

hello i was wondering if you could help me, i sold a iPhone 6 about a week ago on ebay and now the buyer wants to return the phone saying it no longer powers on, I've checked the feedback and it shows he's brought a few main boards for the iPhone 6 before hand
how do i check the main board is the correct one for the phone if apple haven't included a serial number on the main board and the phone is completely dead?
The iPhone 4,5,5s all had serial number stickers but cant find anything on this board
thanks

Could someone please help me out
thanks

After replacing main board how to install OS X

Hi guys,
I had lots of problem with my late 2011 macbookpro, after Apple's main board replacement program, I gave my computer to the service( not apple store, because I don't have one in my city). Now they changed my without any payment but they didn't install any OS X in to my computer and they want to charge money for installinng OS X. Is it normal? (My first question)
I am trying to install OS Xit but I couldn't manage ( when I gave to my computer to the service I have mavericks by the way.) Now When I enter Os x utilities menu and press reinstall Os x. Os x mavericks screen is appeared. I am connecting wifi and entering my apple id but it says 'This item is temporary unavailable . Try again later'
Can you help me what can be problem?? How can I install OS X my own?

My opinion is that you should have had an OSX installed as part of the replacement process. But my opinion counts for little.
Try this: Boot the MBP with the OPTION + COMMAND + R keys down.
If successful, you should see a revolving globe. By following the directions, you will be connected to the Apple servers and should be able to install the original OSX that came with your MBP (Lion was the OSX for late 2011 MBPs).
You will need a solid Internet connection.
Ciao.

LED Tv 50L4300EE - Main board issue

hi
My family in iran, have a Toshiba 50L4300EE LED tv which had voltage shock i guess by thunder, that made the tv don't work anymore.
i currently live in iraq, and i couldn't find the main board in iraq and also not in iran. which made me search in internet for that but i think the internationa model for this 50L4300EE is something else.
Now i've found a main board in ebay, here
which the model is 50L4300U with "U" in the end and not "EE"
i want to know does it fit our model 50L4300EE or not, and if not where can i order the bard
thanks for your attention and reply
Attachments:
Share2014-10-27-60ec3b35f089ed0ab625d9f453504fdb74d111969055c19af8b8e5dc7eece779-Picture.jpg ‏216 KB
Share2014-10-27-500d8c51114202f21e8e870fe27877ea66d6b151be93fe4e9487baad36a7e205-Picture.jpg ‏372 KB

any response please?!

Want to change my main Itunes

I searched quite a few different topics and couldn't find anything to answer my particular questions, so sorry if they have been answered.
I have the video ipod, when i very first installed my itunes, i mistakenly put it on an XP account that has had problems with viruses and doesn't work very well. So in additon to the itunes on that account, I have also added songs to my ipod from several other itunes on different computers. I want to change it so that my main itunes (the one where i can make playlists) is on a different account of my computer. I tried moving all of my songs to a shared folder but I couldn't get everything to work out...
So basically, I want to change my main itunes to a different account, and be able to have all of the songs from my ipod on that Itunes library. If I can figure out how to change my main itunes, and copy all my songs from my ipod onto the itunes playlist, that would be perfect.
Also...I keep my ipod in my car 90% of the time and play it through my stereo with a plug-in. Since it is constantly recharging in my car, I usually just leave it on...could that potentially be bad for it?
Any responses will be greatly appreciated. Thanks

Hi
There are possibly simpler ways to do what you want, but one thing I can suggest (in case no one else offers any tips) is to download one of the many freeware applications that have been created to allow you to transfer songs from your iPod to your computer. You could then simply install iTunes on the computer/account you want to use, hook up the iPod, run the app. and then transfer all the songs from your iPod to your new iTunes library.
If there are some songs on the various accounts that aren't on your iPod, then set the iPod to disk mode and use it as an external hard drive to copy those extra songs and carry them to the computer/account you have now set your main library on.
After that, just delete all the other iTunes libraries (on different comps/accounts) that you don't want.
See the first few results from this google search to find the relevant application:
As for your second question, I don't know for certain but my guess would be that it won't be damaging to your iPod, but for caution's sake you might like to ensure you turn it off for an 8 hour period every few weeks.

Main board for 55g310u

im looking for a main board for 55g310u. im not disappointed the board is bad im disappointed that the board is not avble and the tv was only a month out of warranty. called toshiba and they offered nothing to help. anyone have an idea where to find the board. i have only been waiting for 4 months for the board to come in.
ps toshiba? it would be great if someone reached out to me to offer some sort of solution.
thanks

Did you ever get an answer? The exact thing just happened to me and I couldn't be more angry.

Elitebook 8560p main board failure

Apparently this is a common problem with the main board failing - I bought 2 at the same time for my office and one went out just before warranty ran out. I'm told only refurbished boards are available and that it may be better to put the money into a new laptop/notebook. Any useful info would be appreciated. I still like this notebook even with this apparent inherent problem. Bought in September 2011 so was hoping to get another 2 years.....

Hi Patricia_s,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Here is a link to the manual page 49 for the system board. You could just google the part number or HP Parts Surfer.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Please help: New MSI R6770 with MSI MS-7093 main board doesn't POST

I'm upgrading my son's HP a1130n which has an OEM MSI MS-7093 main board. I purchased the MSI R6770 based on a local retailer's advice.
I took the following steps:
- upgraded the power supply to a Cooler Master RS500-PCARD3-US 500W
- set the BIOS to boot with PCI-E video
- installed video card, attached 6 pin power connector, and powered on
With the video card installed, the computer runs all fans at maximum speed. No POST beep.
After taking the card out, the computer returns to normal.
I thought I'd ask for advice here before returning the card. Thanks.

Thanks for the response.
I would have to purchase a card to try it. One of the main reasons I went with this card is that with the motherboard layout the RAM is directly in line with the PCI-E slot. Many of the NVIDIA cards have a long form factor with a large fan housing that would physically interfere with the RAM.
So there's a known problem with the current generation of ATI cards on some motherboards? In that case, going to a lower powered Radeon series wouldn't help?

DV4t-5200 Main Board bad?

Hi all, i have a Envy DV4t-5200 laptop that recently stopped working (out of warranty), it wont power up at all, no beeps, very little lights, no HDD activity......
I did some extensive trouble shooting, diconnecting various items from the main board- dvd drive, speakers, fan, keyboard, touchpad, etc... and did manage to get it working agian, the computer seemed to be cycling trying trying to get started, fan would start up, then stop almost immediately, then do it all over again, eventually i got lucky and it started. I put everything back together started it up again and all was good. Came back the next day and it was back to doing nothing again. So.... back to the drawing board; started pulling things apart again, this time while trying to get it goign with virtually everything disconnected again, the fan barely budges at all when i hit the power button. So ive narrowed it to two possible problems, please keep in mind, I've tested the power supply, its reading 20 volts as it should, I also have been doing my testing with the battery pulled out, so its not that either:
1. Bad power jack (plug in wire harness type) - Ive tested the voltage on this with the compuer plugged in, i seem to be getting 20 volts on all of the red leads, which seems normal with my limited knowledge of wiring. Anything else i should be testing on this to rule it out? Obviously cant test to see if the voltage does anything weird when it starts, because it doesnt start.
2. Bad main board - Everything looks fine on it, but who knows. The product number on it is 717188-501, i cant seem to find this part anywhere online, anybody have any advice on how to replace this? I bought the computer about 18 months ago, its kind of frustrating that i cant find a part for a computer this new.... Are there any relatively straightforward ways to test the main board? Obviously im not opposed to getting my hands dirty so to speak...
I will also mention that i suspected the problem could be in the "switch" that puts the computer into hibernate when closing the lid, when getting it working initially i noticed that it seemed to start depending on how the lid was poistioned. So when i did have it momentarily working i set it up to do nothing when the lid closes, this seems to not be the problem since its not working again but who knows.
Thanks in advance for any help,
Jon

Sorry, one more thing i should mention; when i had it working, i reconnected things one at a time to try and isolate the problem, but none of the various components caused the problem again.

What would you do with a mint Pb with ruined Main Board?

More precisely speaking: The graphic processor seems to be damaged (maybe the power supply as well). The Main Board has already been exchanged 2 times; no warranty left. I'm not up to have it repaired a 3rd time.
Suggestions very much appreciated!
Thanks a lot
Peter

Peter,
3. Make an insurance claim.
Otherwise, as it's a pretty recent model, it'd be a shame to sell it for peanuts, although there are a lot of people out there with Titanium PBG4's with flaking paint that would love to get their hands on it.
I think the Titanium PBG4 is a real design classic, so I'm keeping mine, and using it, even though I bought a new 1.67GHz 17" Powerbook about 5 months ago. It just gathers dust while the old PB is used every evening.

MBP Boots sometimes - If logic or main board bad, what can I expect?

The Symptoms:
MBP Boots only occassionally. When it does not fully boot you can hear the disk and fan very slowly wind up, over the course of a minute. There is no startup chime. The screen never comes on and remains dark, no external monitor comes up, the keyboard and usb ports are disabled, and the latch light glows steady and dim. It doesn't repond to startup key commands and the disk you can hear doing something but nothing comes on.
I've swapped out the ram, booted into safe mode (when I can get it to boot), run disk utility and disk warrior, among other tools, booted from a flash drive to run diagnostics. Disk checks out fine, zapping pram, resetting smc, all this does nothing. Genius bar did diagnostics and couldn't find anything wrong, but offered me the repair depot.
Conclusions:
So after researching many threads the past few days, a trip to the apple store with some diagnostics, and further testing/swapping ram/resetting pram and smc, I've come to the conclusion that I must have a problem with the logic board or main board. My computer only starts up after about 5 cold boot attempts and/or some of the above processes. Once it's up and running it's fine. When it doesn't boot the drive spins up, the fans come on, but the screen/keyboard/usb etc are all inactive, and the latch light is a steady dim white. When the computer does boot it runs fine.
Question:
My question is, should I expect more serious problems in the near future, or is it at least possible that I could limp along for some months in this condition? I have the option to possibly submit it to repair depot for refurbishing, but if I could make it at least through some june update news I could make a more informed decision about what to do.
Any and all information, experience, or suggestions are much appreciated.

I agree with you that the people who staff the genius bar are not genius' but technicians, and are of varying degrees of competency. However if you are offered what is referred by some as a 'depot repair', consider it very seriously.
My experience is as follow with my old 2006 MBPs: Several years ago I had a serious problem with the display and was offered said repair that would fix the display issue and any thing else that was found to be faulty.
The following was replaced;
     The Display
     The Optical drive
     The Airport card
     The top cover
          (the old one had dents in it and there was no expectation on my part that it would be replaced)
      The keyboard
      The bottom case
      The RAM cover
The total cost was a fixed price of $310 which was told to me up front. That is what I paid (plus tax). The invoice showed a total of $1240. I still have that MBP and it still looks and operates as new. This repair was not done locally, but at an off site location. I suspect it was done by very well qualified technicians.
If you are offered such an option and your budget can accommodate it, I suggest you take it. You also get a 90 day warranty with it.
Ciao.

Pages? Can I open really old Claris Works documents with it? I don't want to spend $20 to find out.

Pages? Can I open really old Claris Works documents with it? I don't want to spend $20 to find out. I saved a bunch of stuff back in 1996, and now i need to open it.

Pages opens strictly word processing AppleWorks v6 files.
The problem with ClarisWorks files were they could contain all sorts of objects from databases to spreadsheets, drawings and paint. the iWork suite is not that versatile.
But you really have little choice as ClarisWorks and AppleWorks are both history. If you are going to switch, the sooner the better.
Just keep in mind what Apple did to ClarisWorks/AppleWorks along with many other of their appliactions and technologies theywill ultimately do to Pages.
Peter

WANTED! L.G. Phillips Main Board out of 22" Cinema Disp.

Similar Messages

Maybe you are looking for