Wanted to know in logic chenal strip

In logic 7 chenal strip how does the order work from top to bottom or botom to top if i place a plugin in the first slot and two more was added how dose logic read which ones first

Top to bottom.

Similar Messages

Hi, I want to know if Logic Pro X running on Mavericks works ok with M-Audio Fast Track before buying it.

Hi, I want to know if Logic Pro X running on Mavericks works ok with M-Audio Fast Track before buying it.

Hi,
Yes the Scarlett 2i2 will work with Logic Pro or Reason, make sure you download the latest version of our driver (1.5 dmg for MAC) from focusrite.com downloads page.
Hope this information helps.
Best regards.

Want to know name of logical database

hi,
   i want to know name of logical database which will contain following tables : BSEG , BSIS , BSAS, BKPF.
i want all these table together inside one logical database.

Hi Sachin,
Go to SE11 transaction display any table as for ex BSEG.Put where use list for this table.You will get a list here.Select LDB.Press enter.You will get some LDB's Check in which LDB all the tables are present.
LDB SDF contains table BKPF,
                       BSEG,
                       BSIS.
Regards,
Mukesh Kumar
Message was edited by: mukesh kumar

I dropped my iphone 5 in the water, its dead and when I try to charge it the apple logo comes and goes, thats my only sign of life, I've done many after market repairs but what I want to know is if I should replace the ligntning port or the battery

I dropped my iphone 5 in the water, its dead and when I try to charge it the apple logo comes and goes, thats my only sign of life, I've done many after market repairs but what I want to know is if I should replace the ligntning port or the battery... or just buy a galaxy s5?

If you dropped it in water, and then plugged it in, you may very well have destroyed the battery and/or the logic board. Charging/plugging in to a power source is very damaging to wet electronic devices. There is not much you can do but replace the entire iPhone...and since you did repairs yourself Apple will not do an out-of-warranty replacement.
You can try replacing the battery, the lightning port is another issue, but I would not expect that iPhone to work again.

I want to know exactly, what is s_tcode and what is its importance in sap basis security?????

Dear sap exports...,
I want to know what is s_tcode authorization object.? and what is its importance...? please can any body help me .....and clarify my doubt.....

If you dropped it in water, and then plugged it in, you may very well have destroyed the battery and/or the logic board. Charging/plugging in to a power source is very damaging to wet electronic devices. There is not much you can do but replace the entire iPhone...and since you did repairs yourself Apple will not do an out-of-warranty replacement.
You can try replacing the battery, the lightning port is another issue, but I would not expect that iPhone to work again.

I want to know critics about Layout Mode

Hi,
I want to know critics of Layout Mode feature in DW. Seems
like a wonder tool to me, and apparently solves many of the
problems i had when laying out pages, all you have to do is drag
and drop tables or cells here and there and add content to them!
Is there any disadvantage or inconvenience with this
approach? Why isn't it the typical workflow in town (CSS seems to
be the dominant approach, despite obvious more steps and workforce
than layout mode).
Thank you in advance for your opinions, i appreciate.

Hello,
If the web were static like print media, layout mode would be
fine.
In many graphics applications like Photoshop, you can drag
elements (layers)
around until you get your design exactly how you want it.
Then, you simply save your design in whatever image format
you'd like. All
of the layers are merged into one, static image,
All of the parts have merged into one element, no longer the
multiple parts
you were dragging around.
When a user sees your image, either on a piece of paper or on
their computer
screen, it looks the same to everyone.
Overall, it might be bigger or smaller in whole dependant on
print size or
monitor resolution, but the layout itself can't change.
A web page, unless the page is one giant image, remains
multiple parts after
you publish it and some of these parts the user can change,
such as text
size.
Any area of your design with text in it will look different
on their screens
than on yours, but the images won't change size.
This is how the web works, and this is where layout mode
fails.
As you drag things around in layout mode, DW writes code to
try to keep the
elements exactly where you want them in relation to other
objects.
It merges cells which fills the code with colspans and
rowspans, and it adds
spacer images by the tens or hundreds in an effort to keep
everything "stuck
together" exactly where you dropped the elements.
The more things your drag and drop, the more complex the
code.
When you are done, your layout looks like you want it to on
your screen but
behind it is code that is very fragile and cumbersome.
With this code, if any part of your layout changes size in
someone's browser
(like a text area), everything else in the layout that is so
tightly tied to
it
will be affected as well.
This usually results in things shifting and not lining up any
more, the page
"breaking" and filling up with gaps and misalignments
throughout the page.
The one change ripples throughout the whole page, because
every element is
so tightly connected by the code Layout Mode wrote.
In essence, Layout Mode wrote such stringent and unforgiving
code that your
design will only work reliably at 1 text size and 1 browser
viewport size.
Those sizes are the sizes your browser was set at when you
designed the
page.
Think of it this way.
You have 100 playing cards and you lay them out on a table in
10 rows of 10
columns each.
You make sure all of the edges are touching.
It's a nice, tight layout.
On one of the cards in the center, you write some words in
marker.
If you saved this as an image, it would look the same to
everyone.
A hundred cards with all the edges touching and text written
on one of them.
If someone enlarges the image to read the text on the single
card, all the
other cards grow equally and the layout looks exactly the
same, only bigger.
However, if you saved this as a website and someone enlarges
the text to
read it, only the card with the text gets bigger.
All the others stay the same size. But you wanted all the
edges touching.
You'd like to keep as many cards as neatly arranged as
possible, but layout
mode doesn't care about that.
It's trying to keep every card edge touching, just like you
did when you
dragged and dropped them..
What happens to the neat rows and columns of cards if the
single card with
text on it doubles in size?
Cards all around it move and nothing lines up anymore. Gaps
appear between
every card.
Changing the size of that one piece of the layout ripples
through the rest
of the page because of that really complex, cumbersome code
Layout Mode
wrote. It really wants to keep everything just like you
wanted it, all the
edges touching and it doesn't care what the layout looks
like.
If you had used standard mode instead of layout mode, the
page would be
dynamic in that the elements (the cards) can freely flow in a
logical manner
under different user's settings.
When this single card doubles in size, the group of cards
above wouldn't be
affected. They would stay neatly arranged in rows with all
their edges
touching as would the group of cards below the enlarged card.
You'd keep a nice, neat layout of cards with just one row of
cards in the
center taller than the other rows because of the single
bigger card.
Instead of being filled with gaps and misalignments all over
the place that
Layout Mode's code caused, the page would still look good.
Layout Mode wrote such bad code as it tried to keep a layout
static in a
dynamic environment, that it has been removed from
Dreamweaver.
Here's more very good info, including a graphic example of a
common problem
Layout Mode creates for the unsuspecting....
http://apptools.com/rants/spans.php
There's something arguably as bad as layout mode you should
also stay way
from.
They, too, offer the ease of drag and drop but at a huge
price when you
realize all the troubles and then have to completely rebuild
your site.
Please read this:
http://apptools.com/examples/pagelayout101.php
Particularly, the section entitled "The trouble with layers"
(AP Divs)
Take care,
Tim
"mballom3" <[email protected]> wrote in
message
news:[email protected]...
> Hi,
>
> I want to know critics of Layout Mode feature in DW.
Seems like a wonder
> tool
> to me, and apparently solves many of the problems i had
when laying out
> pages,
> all you have to do is drag and drop tables or cells here
and there and add
> content to them!
>
> Is there any disadvantage or inconvenience with this
approach? Why isn't
> it
> the typical workflow in town (CSS seems to be the
dominant approach,
> despite
> obvious more steps and workforce than layout mode).
>
> Thank you in advance for your opinions, i appreciate.
>

I want to know how to setup the logicaladdress (cluster+HA+oracle)

I want to know how to setup the logicaladdress (cluster+HA+oracle)

Please have a look at:
http://docs.sun.com/app/docs/doc/819-0703/6n343k6g0?q=SUNW.LogicalHostname&a=view
for how to add a Logical Hostname Resource to a Resource Group (in that case the RG where you configrued ha oracle for).
There is nothing special for HA oracle on that part.
If you configure your oracle_listener resource for that specific logical hostname resource, then you should configure a dependecy from the oracle_listener to the LH.
By default the RG will have property Implicit_network_dependencies set to true, which should be enough.
If this property is false, I recommend adding the LH resource name to the Resource_dependencies property of the oracle_listener resource.
For a general overview I recommend reading:
http://docs.sun.com/app/docs/doc/819-0703/
Greets
Thorsten

Just Bought a Presonus Firebox and want to know if I really need to install

Just Bought a Presonus Firebox and want to know if I really need to install the presonus software that came with it?
Is it really necessary?
thanks, technoreid

The Firebox Mixer allows you to set up different
routings for the monitors and headphones. You may
never use such features, but if you do, you'll
appreciate the flexibility. It can also be used to
provide lower latency monitoring of live signals than
you might get using softwre monitoring in Logic.
For most operation, you won't need it, and you'll
control everything from Logic and the front panel
level controls.
In my opinion, the Firebox is the king of small
interfaces.
Before worrying about a tube preamp, get some mics,
and learn how to use the EQ in Logic.
+1 a solid interface
personally i use the mixer feature to switch my main outs from 1-2 to 3-4 when using traktor to let 1-2 be the headphone cue.... ect....

I want to upgrade from Logic 9 to v.9.0.2-

Hi!
I want to upgrade from Logic 9 to v.9.0.2…this requires the origional Logic 7 serial number….. I origionally upgraded to Logic 9 from Logic Pro 7…. I still have the Logic Pro 7 black box, install discs and Dongle, BUT I don’t know where the origional Logic 7 serial number is actually located!!! Anybody know where it is? Thanks

Bluesjohan wrote:
Is there anyone who can help me to upgrade from 9.0.0 to 9.0.2?
I have downloaded 9.0.2 kpg but when i click on the file there`s a warning that says,
Your computer does not need this update.
what shall i do?
Go to the Applications folder and rename *Logic Pro 9.app* to *Logic Pro.app* .
Run the update installer.....
A

Hi I have just bought a mac book pro 2ghz 8gb ram with haswell.also it's running maverick. I am wanting to start using logic but does it work ok with maverick everything I read says it's no good please help

Hi I have just bought a mac book pro 2ghz 8gb ram with haswell.also it's running maverick. I am wanting to start using logic but does it work ok with maverick everything I read says it's no good please help

Which version of Logic? I have 9, but I've yet to install it. I'm just creating the images of the disks atm to install them on my Haswell. Will let you know how that performs.
Logic 10 would most certainly work fine though.

We want to know the reason that the compression package is bigger than planned.

We have made a game by using the engine of Unity. It is 38M in the local compression which art resources accounted for 20M while sound accounting for 1.3M。
when the game is released, we set the Universal armv6 + armv7 (OpenGL ES1.1 +2.0) option in the Target Platform parameters, we also set the Disabled options in the Stripping Level parameter, and the Fast but no Exceptions option in the Script Call Optimization parameters. But the final product package published in the appstore is 66.8M. We want to know the reason that the compression package is bigger than planned.
Thank you.

You probably want to post in the Developers forum area.

I want to know the difference between row.REFRESH_UNDO_CHANGES | row.REFRES

I want to under stand this statement
row.refresh(row.REFRESH_UNDO_CHANGES | row.REFRESH_FORGET_NEW_ROWS);I know that refresh method take int
I want to know what is the meaning of this int
and what if I used
row.refresh(row.REFRESH_UNDO_CHANGES);Or
row.refresh(row.REFRESH_FORGET_NEW_ROWS);and When I use the Both what is the meaning of this and how this is executed.

When I searched for Java Bitwise OR " |" I Found that
a | b >>     Means 1 if either bit is 1.
This means this is like boolean operations and 0 means false and 1 means true and it makes logical or.I don't know if this true or no.
but when I tried to make
system.out.println();
I found that
        System.out.println("row.REFRESH_UNDO_CHANGES> "+row.REFRESH_UNDO_CHANGES);
        the result is > 10
        System.out.println("row.REFRESH_FORGET_NEW_ROWS> "+row.REFRESH_FORGET_NEW_ROWS);
        the result is >> 8192
        System.out.println("(row.REFRESH_UNDO_CHANGES | row.REFRESH_FORGET_NEW_ROWS)> "+(row.REFRESH_UNDO_CHANGES | row.REFRESH_FORGET_NEW_ROWS));
        the result is >> 8202
        this means this makes addition operation
If I make something like this
        row.refresh(8202);
        is this will make the same operation like
        row.refresh("(row.REFRESH_UNDO_CHANGES | row.REFRESH_FORGET_NEW_ROWS)> "+(row.REFRESH_UNDO_CHANGES | row.REFRESH_FORGET_NEW_ROWS));and is it takes the number and make the operation depends on this number. like 10 means row.REFRESH_UNDO_CHANGES.
and is this statement
row.refresh(row.REFRESH_UNDO_CHANGES | row.REFRESH_FORGET_NEW_ROWS);equals to
row.refresh(row.REFRESH_UNDO_CHANGES);
row.refresh(row.REFRESH_FORGET_NEW_ROWS);

I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id

I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id

There probably is, but it requires that you be able to use punctuation and write in sentences so that we can understand exactly what you want.
You can block others from using your Apple ID by changing your password. There is no way to erase what was already downloaded on to someone else's device, for obvious reasons,

Sent my iphone in for repair. want to know if anything has been done?

basically, i sent my iphone 4 running iOS 7 to repair my broken, cracked screen. i went to update my apps on my phone and it came up with the mans email with his apple ID. i then changed this back to mine but i was curious as to why he had his apple ID on there. I should also add that when i got the phone from him most apps were missing so i backed it up after i got home (which redownloaded all my apps) but they still needed updating. Ive fixed the problem now just want to know if he tampered with anything on my phone (why would his apple ID be on there).
thanks in advance

How are any of us (Apple users just like you) supposed to have any idea?
We weren't there. We don't know the specifics of what happened to your iPhone.
Ask the store that repaired it.

Hi it's me rabia and i'm apple user I want to change my cell phone because it's having scratches on it and i also feel like its home button did't work correctly So i want to know that can i have a new cell phone on replace of this one at any nearby of m

Hi it's me rabia and i'm apple user
I want to change my cell phone because it's having scratches on it and i also feel like its home button did't work correctly
So i want to know that can i have a new cell phone on replace of this one at any nearby of my house App store without any cost ?
But i'm not having any line yet on my phone i use it on net mostly so what is the scene can i have or can't ??
please inform me soon !

Is your phone still covered by warranty? If so, go to your nearest Apple store and depending on what happened, this may or may not be covered by warranty. If it is, then you can get a replacement exactly as the phone you already have.
If out of warranty, then there is nothing you can do and you'll have to pay.

Wanted to know in logic chenal strip

Similar Messages

Maybe you are looking for