Wanted to update the software now available, but it is asking for a pass code. As far as I remember in didn't put in any pass code , how do I settle this issue . Earlier updates were asking Apple ID but pass code for updating the new soft ware not known.
Wanted to update the software now available, but it is asking for a pass code. As far as I remember in didn't put in any pass code , how do I settle this issue . Earlier updates were asking Apple ID but pass code for updating the new soft ware not known.
Hello Kewal,
Thank you for the details of the issue you are experiencing when trying to perform an update. I recommend trying to update using iTunes, and as always, it is a good idea to make a backup first.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
Update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
Thank you for using Apple Support Communities.
Best,
Sheila M.
Similar Messages
-
when I try to boot my macbook pro the startup manager doesn't show any drives. How can I solve this issue?
Please confirm what version of OS X you are running - I doubt it is the ancient OS 10.1 !
-
Hi guys...I have just got a new computer and want to get my library back up and running on it. However I seem to be missing some of my iTunes music purchases. Any ideas on how to get them back? They show up on my ipad but not my actual itunes account.
Hello there, Capricious13.
There are great pointers in the following Knowledge Base article. Depending on where you see the content and where you want to get it to, this should guide you to putting it in the right place:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
I get a Windows error message "application attempted to access C++ runtime library incorrectly" when I try to update or to reinstall iTunes. How do I resolve this issue?
Hi there MRDLS,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
-Griff W. -
When I try to finalize my project a message pops up, "Sharing requires more memory to be available." How do I work this issue out?
https://support.apple.com/kb/TS1567
Ah, it has been mentioned daily esp since iOS 5 / iTunes 10.5 but has always been there as an issue.
Order of attempts:
Repair the installers
Uninstall EVERY Apple component (auto and manual)
Services: Restart all 3 Apple items (AMS, Bonjour, iPod)
I* always do the last almost, then launch iTunes, and only then connect iPod.
IF you see a yellow alert in Devices and Printers or in Device Manager, then I could find NO WAY to fix or repair other than a clean OS. Something messed up the device driver support.
If/when Windows asks "what to do when it detects iPod"? don't chose any default action, to me, based on hunch and 3 PCs, that seems to mess AMS up for some reason.
Tried with Windows 7 64-bit Pro and Home Premium, and also Deve Preview 8 (which other than the inability to update iOS to 5.0 seems to run better -- except when it comes to AMS thing! so seems Apple is not on the same page writitng drivers. -
I m having problems with both my iphone 3gs and 4 when my cellular data is on and my battery is fully charge but out of suddenn it will shut off can i know how can i troubleshoot this issue thanks
simply try doing a back up and restore
when going thru the activation screen, select SET UP AS NEW and then test your device. if it is not shutting down then it could be 1 or more apps tht have been downloaded wch could be affecting the device
you will then need to follow the process of eleimnation, meaning add 2 apps and then monitor your phone, if nothing happes then add another couple of them and then check
good luck !! -
I have a new i4 phone and am new to Apple. My imessaging will not send out any messages. How can I fix this? HELP
about message http://support.apple.com/kb/HT3529
troubleshooting message http://support.apple.com/kb/ts2755
settings - message - imessage - is turned ON? Do you have it activated?
Make sure you have a good wifi or cellular data connection.
Also you can only imessage other apple products who have imessage on. -
No matter what wi-fi I'm connected to or browser I'm using, webpages take forever to load or they never load at all. Other computers do not have any problems. How can i fix this?
I've tried safari, chrome, firefox...I've cleared the cache as well. This has been going on for several months and used to be tolerable as it was not every website. Now it has become every website and is impossible to deal with. My roommates computer and my cell phone connect fine. I'm fully connected to the router yet websites don't load. I'm using 10.7.5. Thank you!!Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
I`ve just bought a Mac Book pro 15", did the required updates and since two days ago it freezes. Now I can´t even start the computer. the screen is allways white. how can I solve this issue??
The same thing happened to me... Since two days the ******* thing keeps freezing after a while. Then I try to reboot and the screen goes white and it doesn't boot. If I wait like half an hour it boots again.
I thought it was a hardware problem, but the Apple Hardware Test founds nothing at all. I think it has to do with the software update I performed 2 days ago.
(MacBook Pro 15" Early 2011) -
i have to restore my phone from back up but in order to do it i had to update my software. now that my software is updated there isnt enough room on the phone to back up. is there a way to only restore certain things from the backup like contacts?
Because it says it's incompatible when it can't be, I got hope. I get error messages all the time with my iPod and iPhone that it cannot sync and that 'this device is not capapble of connecting to iTunes' stuff. I literally forget that happened, plug it in again and it works, I later realize that iTunes made a mistake, they do that.
-
My external Apple USB Keyboard letters doesn't work, but the numbers do. Why and how can I fix this issue? Also, When I open the Keyboard Viewer, the letters will highlight only if I hold the modifier key(s) "Control" or "Control and Option". I really need help with this. I don't have any other computer to try it on, so I will have to test it on a friends computer sometime. But perhaps solutions that I can try right now? Thanks.
Hello there, IDuncan23.
The following Knowledge Base article has some great troubleshooting steps you can follow to work on resolving your keyboard issue:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Thanks for reaching Apple Support Communities.
Cheers,
Pedro D. -
I bought the first half of Breaking Bad season 5. downloaded the first 4 episodes fine but now i can't download the rest. how do i fix this issue?
Hello there, Marty1178.
The following Knowledge Base article should help you download your purchased items:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
I recently did an update for my iTunes and now when I try to open it, I get an error that says that my data execution prevention is not allowing it to open. How do I fix this issue?
Try updating your QuickTime to the most recent version. Does that clear up the DEP errors in iTunes?
-
iPhoto frustrating error..The volume for "Df23.JPG" cannot be found. It prompts for all photos with this issue rather than offering an option to ignore. I can find the images in spotlight but not in Find Photo. Does anyone have a solution?
Unless you have the source files that were on the TC or Windows machine you will have to start over with a new library as follows:
Start over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Move the existing library folder to the desktop.
2. Open the library package like this.
Click to view full size
3. Launch iPhoto and, when asked, select the option to create a new library.
4. Drag the Masters (iPhoto 11) folder from the iPhoto Library on the desktop into the open iPhoto window.
Click to view full size
This will create a new library with the same Events as the original library but will not keep the metadata, albums, books slideshows and other projects. Your original library will remain intact for further attempts at fixes is so desired.
OT -
The Yahoo password in the mail setting on all my apple devices - iPad, iPhone 5, mini iPad - has permanently reverted to an old version. I have tried all the suggestions provided by the community so far but nothing works. When I delete the account and re-enter the details, the updated password is recognised and seems to save but, when I go back into the account, the old password is the one that is there.
I am desperate! How can I solve this issue please?See:
How to use multiple iPods, iPads, or iPhones with one computer
What is the best way to manage multiple...: Apple Support Communities
Maybe you are looking for
-
Custom event in popup w/ dynamic region does not reach its server listener
Here's the situation: I have a fragment taskflow. Inside this taskflow's fragment, I am firing 2 custom client event that is being listened to by 2 server listeners. All of these are working fine when I use the taskflow as a region on a page. But whe
-
Need help with Photoshop Element 8
I have never used this software and I am having trouble with what i am trying to do. I would like to convert a photo to black and white and then just add one color to a particular item or area. Please help
-
How to find ECC tables/ reports based on which a DB View is created?
Hi All, We have customized data source created based on a View/ Table. How can i find the ECC tables/ reports based on which this View has been created and also the logic behind which the different fields extract data from ECC.. Please advice. Than
-
How to execute PL/SQL query based on given input parameter
Hi all, I have a pl/sql code which is in Region source. It extracts data from database. I want to execute the code based on input I give. I have to give date as a input parameter. e.g. If I give date1 as a parameter, then following code should execut
-
Hi, I installed PSE 9 last week followed by ACR 6.2. I use a Sony Alpha 350. In ACR, when I look at the Camera Calibration panel and drop-down menu I see "Adobe Standard" and "ACR 4.4". Is this correct? If not, what should be there? In looking a