Wanting to go "back in time" due to issue with iphoto 8.03

Everything was great on Sat. before I downloaded iphoto 8.03. Instead of jumping through hoops to try to fix my issues, can't I simply go back using Time Machine to iphoto 8.02? I've made minor changes otherwise to my mac since Sat. that I can duplicate no prob.
Can I revert back to my machine the way it was Friday or the time of my last back up?
Thanks!

tamara, actually, the following would be even better than trying to restore the application from a Time Machine backup. Reinstall, iPhoto 8.0 from your original iLife `09 DVD, then update the application to the update just prior to the one you began having issues with.
First, open the Applications folder and drag iPhoto to the Trash.
Now insert the iLife `09 DVD and launch the installer.
Accept the license agreement.
When you get to "Installation Type" click the "Customize" button on the left.
If you removed iPhoto as described earlier then there should be a check mark beside iPhoto.
Click "Install".
When the installation is complete go to the Apple Support website and download the iPhoto 8.0.2 Update (I believe it was 8.0.3 that you had trouble with?):
http://support.apple.com/downloads/iPhoto8_0_2Update
Install the update.
Now your iPhoto application is back to the version it was before the 8.0.3 update. However, your photo library was likely converted when you applied the 8.0.3 update. As a result iPhoto 8.0.2 will alert you that the photo library is not compatible with this version of iPhoto.
To fix this, hold down the Option & CMD keys and launch iPhoto.
A window will appear giving you various rebuilding options.
Place a check mark beside "Rebuild the iPhoto Library from automatic backup".
Click "Rebuild".
This will convert the library back to a version compatible with 8.0.2.
Let us know if this resolved your issue. Cheers!

Similar Messages

I have been suggested to down grade to 10.6.6 due to issues with Adobe and Apple working things out. I have downloaded 10.6.6 but wont let me install. Any ideas?

I have been suggested to down grade to 10.6.6 due to issues with Adobe and Apple working things out. I have downloaded 10.6.6 but wont let me install. Any ideas?

Yes, simply reinstall from your Snow Leopard installer disc. The reinstall will not erase the hard drive. After reinstalling you can upgrade to 10.6.6 with your updater.

Firefox constantly freezing due to issues with Flash. Please help.

I was running the firefox 20 beta (and have been for a while) when in the last few days, suddenly any time I tried to open any site that used even the slightest amount of flash, the browser would freeze for minutes on end before finally releasing a "plugin error" type message about Shockwave Flash. If i clicked 'continue' it would stay frozen. If i clicked 'stop script' then sometimes it would fix it, but most of the time it would keep freezing and showing that same message over and over until I stopped the process in task manager.
First I tried to update flash and shockwave- both are up to date. So i decided to delete the files themselves and the programs via add/remove and reinstalled them. Still did not fix the problem.
Next I tried to do a reset firefox to default state. This didn't work. I tried doing it again with the flash files deleted/uninstalled AND I rebooted the computer and the problem still persisted.
Finally, I tried to downgrade to a more stable version of firefox, so I downloaded 19 and it still didnt work. Tried the uninstall/re install for flash one more time and nothing.
At this point, I cannot access about half of the pages I usually go to on the web and I need help here, please anything will do.
One thing that I noticed that might be helpful is that no matter how many times i uninstalled or reinstalled flash, every time it would try to run, task manager would show two instances of it, each using different amount of memory.
again, please please help. If there is any solution short of a total wipe it would be greatly appreciated

hello, maybe it's an issue with the protected mode in the flash plugin - you could try if [https://support.mozilla.org/en-US/kb/flash-113-crashes#w_solution-2-downgrade-to-flash-10-3 downgrading to flash 10.3] (which is still supported) or [http://forums.adobe.com/thread/1018071#TemporaryWorkaround disabling protected mode] makes a difference.

Time Capsule download issues with Windows 7

Hello together
My problem is as follows: upload to Time Capsule with two PCs running on Windows 7 (both 32 and 64 bit) and a Mac Book Pro is working without any problems occuring. TC and the two PCs are in the same workgroup and PCs are connected via WIFI in private mode.
Download from TC to Mac Book Pro works without problems. But in contrast to that, when downloading with the two Windows7-based PCs the connecting is breaking off all the time and the message "Network error" will be displayed. In order to get a new connection to TC the power plug must be unplugged and replugged again. Do you have any advice what to do? Thanks very much in advance.

Are you using SMB compatible names for the TC and wireless.. short, no spaces.. pure alphanumeric.. If not do so?
I also recommend using fixed channels and maybe fixed mode. Lock up as much as possible as the PC does not deal as well as the Mac with the auto band, channel and mode switches.
I am not sure what you mean by this..
PCs are connected via WIFI in private mode.
Please explain a bit more.
Windows wireless drivers are often terrible.. many people have fixed issues by using a more recent driver direct from the wireless card manufacturer.. this is important.. not windows default driver,, not computer manufacturer supplied one.. eg intel card then get latest intel driver from intel.
Are you running bonjour for windows on the PC's??
Try using static IP address which also might help.. windows did have issues with dhcp in the past.

I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)

Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help!

Time Capsule connectivity issues with cable modem

I have Comcast internet service (coming through a Linksys CM100 modem, no router) plugged directly to a 2TB dual-band TimeCapsule. In the past this has been working, and the TimeCapsule has been providing internet access to three Macs, as well as backing them up. I also have an AirPort Extreme base station (not the dual-band one but not the 2003-era UFO-shaped one either) that has been connected to the TimeCapsule over house ethernet to provide wireless through the rest of the house. Last night my connection kept dropping out. I could connect to one wifi network and it would not work, then I would connect to the other and it would work for a while before stopping. I have disconnected everything and then replugged only the cable modem and my TimeCapsule. When ethernet is plugged directly into my iMac from the modem, I get an internet connection without issue. When I plug it into the TimeCapsule, it reports an internet connectivity error. It says it gets no IP address, and no DHCP setting that I provide it with alleviates this message.
I'd be gratful for any suggestions on how to fix this issue. I don't really want to wipe the TimeCapsule completely, as it contains our backups to last July.

When ethernet is plugged directly into my iMac from the modem, I get an internet connection without issue. When I plug it into the TimeCapsule, it reports an internet connectivity error.
Because cable modems associate and "remember" the device with which they have established a connection, they need a complete reset whenever you change the device that is immediately connected to them.
Push the reset button, If present, on your modem
Power off the modem
Pull the battery if it is easily accessible
Power off everything else on the network, order if not important
Wait at least 15 minutes
Make sure that the Ethernet cable from the modem is connected to the WAN port (circle of dots icon) on the Time Capsule
Power up the modem and let it run 2-3 minutes by itself
Power up the Time Capsule the same way
Power up each of your other devices about a minute apart
Check for proper operation the network.

Time machine recovery issue with passwords and logins

I have 2008 MBA running 10.9 which had hardrive fail, reinstall from 10.6 DVD recovery all info from time machine backup, had to reset passwords,then ran s/w update (app store didn't work from recovered s/w) now I can't login. Takes my account password looks like it is logging in but goes back to login screen. HAve repaired permissions, reset pram, started in single user mode which shows more info then I understand but saw line:
dyld: shared cached file was built against a different libSystem.dylib, ignoring cache
I think I have system componetnts missmached but not sure how to recover using the time machine backup.

Went through wiping the disk but added a second partition. Went through all the install again and after s/w update moves it from 10.6 to 10.6.8 needed to do the 10.7 upgrade in will not let me login ( yes had to reset password). Apple needs to do better then thes crappy diskless installs. If I had a 10.9 disk I would have been up and going without wasting my weekend.

WebLogic does not start due to issues with WLS_DIAGNOSTICS000000.DAT

My customer is getting the following exception everytime he tries to restart his WebLogic services:
####<Jun 16, 2009 9:23:46 AM MST> <Critical> <WebLogicServer> <hqpsfindev> <PIA> <main> <<WLS Kernel>> <> <> <1245169426020> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.diagnostics.lifecycle.DiagnosticComponentLifecycleException: weblogic.store.PersistentStoreException: [Store:280020]There was an error while reading from the log file
     at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:44)
     at weblogic.diagnostics.lifecycle.DiagnosticFoundationService.start(DiagnosticFoundationService.java:107)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Caused by: weblogic.store.PersistentStoreException: [Store:280020]There was an error while reading from the log file
     at weblogic.store.io.file.Heap.getNextRecoveryFile(Heap.java:794)
     at weblogic.store.io.file.Heap.open(Heap.java:181)
     at weblogic.store.io.file.FileStoreIO.open(FileStoreIO.java:85)
     at weblogic.store.internal.PersistentStoreImpl.open(PersistentStoreImpl.java:353)
     at weblogic.store.PersistentStoreManager.createFileStore(PersistentStoreManager.java:202)
     at weblogic.diagnostics.archive.DiagnosticStoreRepository.getStore(DiagnosticStoreRepository.java:61)
     at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:42)
     ... 4 more
Caused by: java.io.IOException: Error reading from file, Reached the end of the file., errno=38
     at weblogic.store.io.file.direct.DirectIONative.read(Native Method)
     at weblogic.store.io.file.direct.DirectFileChannel.read(DirectFileChannel.java:133)
     at weblogic.store.io.file.StoreFile.read(StoreFile.java:281)
     at weblogic.store.io.file.Heap.getNextRecoveryFile(Heap.java:792)
     ... 10 more
He has narrowed this down to the following: He deletes
...\domain\servers\WebLogicAdmin (or managed server)\data\store\default\XXXXX.dat (WLS_DIAGNOSTICS000000.DAT). He also deletes the .dat file under diagnostics and then the service starts without issue.
Can't be doing this every time he bounces his server.
Does this call stack indicate lack of disk space?
Caused by: java.io.IOException: Error reading from file, Reached the end of the file., errno=38
Is there a way to disable diagnostics so this files don't get generated?
Thanks!

Diagnostics is normally disabled by default, but I recall that there was a bug a long while back (since fixed) that left it on by default. The following thread might help shed some light on the issue:
Disable or reduce size of diagnostic archive?
Regardless, the unexpected low level exception could be an indication of a bug in the WebLogic file store code. The only time I'd expect to see this is if somehow there are two processes that are both using the same file at the same time (on most operating systems the store lock's its files to as a safety precaution to help prevent customers from making this mistake).
Tom

ICal wont open due to issue with Webex plugin how do i get it to open or remove plugin

Whenever I try to open iCal i get the message iCal quit unexpectedly while using the Webex Plugin plugin. don't know what to do next.

Greetings,
I use WebEx all the time and have never heard of an iCal / WebEx plugin but it sounded intriguing so I did some google searches and looked at Cisco's website and could find no reference there either. If you have any idea where this plugin came from I would be curious to know (it might be useful if it were working).
Try running the Mac Cisco-WebEx Uninstaller and see if that helps.
What version of the Mac OS are you running?
What version of iCal are you running?
Create a new user account on the Mac: http://docs.info.apple.com/article.html?path=Mac/10.6/en/8235.html
Login to that user and test iCal -- does it work in this new user?
Cheers.

IDOCS: One time customer Processing Issue with TRMTYP

Hi Gurus,
We are working on the process of Transfer of Location Master from SAP ECC 6.0 to Third Party TMS and we are facing the following problems: While transmitting One Time Customer:
In case of one time customer Account group used are CPD and CPDA. And when we send TPSLOC01 IDOC the TRMTYP has to be OC but it is taking by default CU.
As per my understanding:
Customer one time or regular is determined based on Account Group.
Please guide us on the same to get OC instead of CU in case of one time customer location transfer.
Thanks&Regards
Sreekanth

Hi All,
I am closing this as there are no updates on this.
Thanks a lot.
Sreekanth

I'm currently in Afghanistan and need to contact Apple due to issues with updating my payment information.

I've spent the last 30 mintues navigating this website to find a way to email customer service and have found nothing! I can't call them due to my location. Does anyone know how to email customer support?

Mainly because l got this hungarian top up card and couldn`t top it up so far /it`s sunday/ and l was hoping they can call me. But obviously l`ll have to call them at some point next week. L just didn`t wanna wait till then.

Evaluator.java won't compile due to issues with javax.tools.*

* Evaluator.java
* Created on January 23, 2007, 4:17 PM
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
package ObjectTools;
import java.io.*;
import java.net.*;
import javax.tools.*;
import java.lang.reflect.*;
* Utilizes {@link java.lang.reflect} package
* @author ppowell-c
public abstract class Evaluator {
    public static boolean writeSource(final String sourcePath, final String sourceCode)
    throws FileNotFoundException {
        PrintWriter writer = new PrintWriter(sourcePath);
        writer.println(sourceCode);
        writer.close();
        return true;
    public static boolean compile(final String sourcePath) throws IOException {
        final JavaCompilerTool compiler = ToolProvider.defaultJavaCompiler();
        final JavaFileManager manager = compiler.getStandardFileManager();
        final JavaFileObject source =
                manager.getFileForInput(sourcePath); /* java.io.IOException */
        final JavaCompilerTool.CompilationTask task = compiler.run(null, source);
        return task.getResult();
    public static final java.lang.Class loadExpression(final String path, final String className)
    throws MalformedURLException,
            ClassNotFoundException { /* java.net.MalformedURLException */
        final URLClassLoader myLoader = new URLClassLoader(new java.net.URL[] {
            new File(path).toURI().toURL()
        /* java.lang.ClassNotFoundException */
        return Class.forName(className, true, myLoader);
    public static java.lang.Object evalExpression(final Class test)
    throws NoSuchMethodException, IllegalAccessException, InvocationTargetException {
        final Class[] parameterType = null;
        /* java.lang.NoSuchMethodException */
        final Method method = test.getMethod("expression", parameterType);
        final Object[] argument = null;
        Object instance = null;
        /* java.lang.IllegalAccessException, java.lang.reflect.InvocationTargetException */
        return method.invoke(instance, argument);
    public static Object eval(final String expression)
    throws FileNotFoundException, IOException, MalformedURLException,
            ClassNotFoundException, NoSuchMethodException, IllegalAccessException,
            InvocationTargetException {
        final Object result;
        final String path = "c:/";
        final String className = "ExpressionWrapper";
        final String sourcePath = path + className + ".java";
        writeSource(/* to */ sourcePath,
                "public class " + className + "\n" +
                "{ public static java.lang.Object expression()\n" +
                " { return " + expression + "; }}\n" );
        if(compile(sourcePath)) {
            final Class class_ =
                    loadExpression(/* from */ path, className);
            result = evalExpression(class_);
        } else {
            result = null;
        return result;
}Produces compiler errors on javax.tools.ToolProvider along with nearly everything else in javax.tools to boot.
I'm using J2SE 1.5.0 with NetBeans 5.5 so they all should be there. I'm following the example at http://userpage.fu-berlin.de/~ram/pub/pub_jf47ht9Ht/evaluating-expressions-with-java since all I want to do is come up with a Java equivalent of "eval()", which I use in PHP whenever I need it.
Help appreciated, I'm lost here.
Thanx
Phil

How do you do the Java equivalent of eval()?The language provides no support for that.
Reflection lets you call any method, where you
specify that method's name as a string and go through
a few other steps to build the proper Method object
with the proper args.
(http://java.sun.com/docs/books/tutorial/reflect/) It
won't let you just evaluate Java source code as a
script interpreter though. To do that, see
www.beanshell.org. Jython and I think Ruby on Rails
also give you scriptingin Java. Jython uses Python's
syntax, but gives you access to your Java classes. I
don't know ayhthing about RoR.I am going to look up PHP/Java myself as I know no Python right offhand (but probably could learn it in about 10,000 years). Tried to figure out reflection but couldn't figure out how to do what in PHP we do like this:
$msg = eval('JButton ' . $nameArray[$i][0] . ' = new JButton("' . $nameArray[$i][1] . '");');

XML Publisher Time out setup issue with load balancer

I have a single node install of Oracle Apps 12.0.4. When running an XML report, it completes successfully and I can view the XML report by clicking on the "view output" button.
I have an Oracle Apps 12.0.4 multi-node install with my database and admin tier running on the same box. I also have two app tiers front-ended with a cisco load balancer. In this environment, when I run an XML Report the job completes with a warning. I have reviewed the log file from the Output Post Processor log file and have the below errors.
[10/14/08 3:40:48 PM] [14736:RT4712865] Executing post-processing actions for request 4712865.
[10/14/08 3:40:48 PM] [14736:RT4712865] Starting XML Publisher post-processing action.
[10/14/08 3:40:48 PM] [14736:RT4712865]
Template code: FNDCPPGD_XML
Template app: FND
Language: en
Territory: US
Output type: PDF
[10/14/08 3:44:33 PM] [UNEXPECTED] [14736:RT4712865] java.net.ConnectException: Connection timed out
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.Socket.connect(Socket.java:516)
at java.net.Socket.connect(Socket.java:466)
at sun.net.NetworkClient.doConnect(NetworkClient.java:157)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:365)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:477)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:214)
at sun.net.www.http.HttpClient.New(HttpClient.java:287)
at sun.net.www.http.HttpClient.New(HttpClient.java:299)
at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:796)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:748)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:673)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:917)
at java.net.URL.openStream(URL.java:1007)
at oracle.apps.fnd.cp.util.RemoteFile.readURL(RemoteFile.java:217)
at oracle.apps.fnd.cp.util.RemoteFile.transferFile(RemoteFile.java:195)
at oracle.apps.fnd.cp.util.RemoteFile.transfer(RemoteFile.java:131)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:224)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
I have double check my tnsnames.ora, opened an SR, researched in Metalink & on the web but am unable to find a resolution. Any help would be appreciated. Thanks!

we have the same issue. Any workaround so far?

I cannot reinstall java after uninstalling due to issues with it.

Well, over the past few days, I have been unable to use anything to do with java. After asking around a bit, I was told I should reinstall java. So, I removed anything to do with Java, and then went to system update to re-download it.
Now, the funny bit. (maybe)
After removing it, I checked for updates via system update, and, lo and behold, it wasn't listed as an update.
I am wondering, how do I re-download it, and without the issues it has been having?
I run a 10.6.8, with a 2 GHz intel core 2 duo.
Thanks.

Klaus; When I tried that, it said seomthing about it not being recognized >.>
I'll try a re-install if things get desprate, I live somewhat rurally, and got some tech savvy people to install, so I'de have to take it in >.>
thanks guys

CU5 failed due to issues with receive connectors

We have a CAS server (mail1, 10.1.0.26) and Mailbox server (mbx1, 10.1.0.25). When I ran the update on the mailbox server, it failed with the following errors (see below). The update completed successfully on the CAS server. It appears
I have a problem with receive connectors. I really could use some help please. Thank you. -Glen
Here are the results of the Get-ReceiveConnector PS script:
Identity
Bindings                                      Enabled
MBX1\Default MBX1                           {0.0.0.0:25}
True
MBX1\Client Proxy MBX1                      {10.1.255.26:25, 0.0.0.0:465}   True
MAIL1\Default Frontend MAIL1              {0.0.0.0:25}
True
MAIL1\Outbound Proxy Frontend MAIL1 {0.0.0.0:717}                              True
MAIL1\Client Frontend MAIL1                {0.0.0.0:587}
True
Here are snippets of the failure results:
The values that you specified for the bindings and RemoteIPRanges parameters conflict with the settings on Receive connector "MBX1\Client Proxy MBX1". A receive connector must have a unique combination of a local IP address & port bindings
and remote IP address ranges. Change at lease one of these settings.
The values that you specified for the bindings and RemoteIPRanges parameters conflict with the settings on Receive connector "MBX1\Default MBX1". A receive connector must have a unique combination of a local IP address & port bindings and remote
IP address ranges. Change at lease one of these settings.

Here's the full output from the failure messages:
Error:
The following error was generated when "$error.Clear();
$connectors = Get-ReceiveConnector -Server $RoleFqdnOrName;
foreach($connector in $connectors) { if($connector.MaxLocalHopCount -gt 1) { Set-ReceiveConnector -Identity $connector.Identity -MaxLocalHopCount 5 } };
" was run: "Microsoft.Exchange.Management.SystemConfigurationTasks.ConnectorMappingConflictException: The values that you specified for the Bindings and RemoteIPRanges parameters conflict with the settings on Receive connector "MBX1\Client Proxy MBX1". A Receive
connector must have a unique combination of a local IP address & port bindings and remote IP address ranges. Change at least one of these values.
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.SystemConfigurationTasks.SetReceiveConnector.InternalValidate()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Error:
The following error was generated when "$error.Clear();
$connectors = Get-ReceiveConnector -Server $RoleFqdnOrName;
foreach($connector in $connectors) { if($connector.MaxLocalHopCount -gt 1) { Set-ReceiveConnector -Identity $connector.Identity -MaxLocalHopCount 5 } };
" was run: "Microsoft.Exchange.Management.SystemConfigurationTasks.ConnectorMappingConflictException: The values that you specified for the Bindings and RemoteIPRanges parameters conflict with the settings on Receive connector "MBX1\Default MBX1". A Receive
connector must have a unique combination of a local IP address & port bindings and remote IP address ranges. Change at least one of these values.
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.SystemConfigurationTasks.SetReceiveConnector.InternalValidate()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".

Wanting to go "back in time" due to issue with iphoto 8.03

Similar Messages

Maybe you are looking for