Wanting to see logging for ASA 5510 Permits
I have a rule which permits traffic to a web server and logging is enabled. But when I go to syslog I am only seeing traffic which has been
denied. What needs to change to be able to see the logged traffic on permit rules? Thanks.
You might have logging globally set to something higher priority than 6 (e.g., 5 or lower numerically). What are you using to display syslog?
You can see the ACE hits using the command line by the following:
To display the hit counters and a timestamp value for an access list, use the show access-list command
in privileged EXEC mode.
show access-list id_1 [...[id_2]] [brief]
Similar Messages
-
Unknown error please see log for details...
Hi,
I have been having major issues with not being able to
connect or administer a site, so I deleted the site from the server
and uploaded a fresh version as the error suggested the files where
corrupt?
Now I get the error "Unknown error please see log for
details" the log is as follows;
Date: 12/22/2006
LocalTime: 12:36
Host: ftp.caitlin-labradoodles.co.uk
Port:
LoginID: caitlinlauk
Path: /
Passive Enabled: false
ProxyHost: NoneContribute Alternate Rename: no
Contribute Optimized: yes
======================== Test Results
==========================
NOTE: For more information on FTP server compatibility
issues, please see
http://www.macromedia.com/support/contribute/ts/documents/ftp_info.htm
Login: SUCCESS!
Changing Directory To: / SUCCESS!
Directory Listing Test: SUCCESS!
Make Directory Test: SUCCESS!
Change Directory Test: SUCCESS!
Upload a File Test: REMOTE_IO_ERROR - Error reading or
writing remote resource.
----------------------- FTP log from the last operation
> CWD /mm_diagnose_9qw83
< 250 Directory successfully changed.
> PORT 192,168,165,54,207,26
< 200 PORT command successful. Consider using PASV.
> TYPE I
< 200 Switching to Binary mode.
> STOR upload_test1_reg_.htm
< 425 Failed to establish connection.
Cleaning Test Directory: Contribute could not create
"mm_diagnose" because it already exists. Please remove this folder.
----------------------- FTP log from the last operation
> CWD /
< 250 Directory successfully changed.
> RMD mm_diagnose_9qw83
< 550 Remove directory operation failed.
> CWD /mm_diagnose_9qw83
< 250 Directory successfully changed.
> PORT 192,168,165,54,207,27
< 200 PORT command successful. Consider using PASV.
> TYPE A
< 200 Switching to ASCII mode.
> LIST
< 150 Here comes the directory listing.
< -rw-r--r-- 1 6518 99 0 Dec 22 12:34
upload_test1_reg_.htm
< 226 Directory send OK.
Any suggestions would be great at this stage as Im scratching
my head with confusion and my customer is getting very irate as she
can not do anything.Hi,
Can you please verify whether user has
read/write/delete/append/create directory rights as an FTP user for
the FTP home directory. If not give the same and try creating the
connection.
Please let me knwo if it helps.
Regards,
Manoj -
HT5953 I only want to see / search for books in English how do it set that up
I only want to see / search for books in English how do it set that up
Mikey ...
Click the round flag icon bottom right corner of the App Store window. In the next window select United States.
For purchases, your credit or debit card credentials must be associated with the same country where you reside.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
From here > The Complete Guide to Using the iTunes Store | iLounge Article
The iTunes and Mac App Store are one in the same.
iTunes Store: Which types of items can I buy in my country?
edited by: cs -
Unable to see interface on ASA 5510 Firewall
Hi All,
I am unable to see 4th interface on my firewall i.e fastether0/3 on my firewall ASA 5510.
Below is the output.
ciscoasa# sh int ip br
Interface IP-Address OK? Method Status Protocol
Ethernet0/0 x.x.x.x YES CONFIG up up
Ethernet0/1 x.x.x.x YES CONFIG up up
Ethernet0/2 unassigned YES unset administratively down down
Internal-Control0/0 127.0.1.1 YES unset up up
Internal-Data0/0 unassigned YES unset up up
Management0/0 192.168.1.1 YES CONFIG up up
Please suggest what could be the reason.
Regards
PankajHi Ramraj,
Even i have the base license for my ASA 5510 which is showing all the 4 interfaces in sh ver. I don't think so license would be an issue. There should be some IOS code bug that needs to be upgraded. If this goes for an OS upgrade it should get resolved.
Its not showing up in sh ver . As Karsten said he might be running on old IOS version.
fy-a# sh ver
Cisco Adaptive Security Appliance Software Version 8.4(4)1
Device Manager Version 6.4(5)
Compiled on Thu 14-Jun-12 11:20 by builders
System image file is "disk0:/asa844-1-k8.bin"
Config file at boot was "startup-config"
fy-a up 1 day 1 hour
Hardware: ASA5510, 1024 MB RAM, CPU Pentium 4 Celeron 1600 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW016 @ 0xfff00000, 2048KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.06
Number of accelerators: 1
0: Ext: Ethernet0/0 : address is 2c54.2d0c.8f1a, irq 9
1: Ext: Ethernet0/1 : address is 2c54.2d0c.8f1b, irq 9
2: Ext: Ethernet0/2 : address is 2c54.2d0c.8f1c, irq 9
3: Ext: Ethernet0/3 : address is 2c54.2d0c.8f1d, irq 9
4: Ext: Management0/0 : address is 2c54.2d0c.8f1e, irq 11
5: Int: Not used : irq 11
6: Int: Not used : irq 5
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 50 perpetual
Inside Hosts : Unlimited perpetual
Failover : Disabled perpetual
VPN-DES : Enabled perpetual
VPN-3DES-AES : Enabled perpetual
Security Contexts : 0 perpetual
GTP/GPRS : Disabled perpetual
AnyConnect Premium Peers : 2 perpetual
AnyConnect Essentials : Disabled perpetual
Other VPN Peers : 250 perpetual
Total VPN Peers : 250 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
This platform has a Base license.
Serial Number: JMX1AXXXXX
Running Permanent Activation Key: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Configuration register is 0x1
Configuration has not been modified since last system restart.
fy-a#
Ramraj please do correct me if am wrong.
Please do rate if the given information helps.
By
Karthik -
How to See logs for custom programs from without the logviewer in NWA
Hello Experts,
The JavaAS developers want to see the logs for their custom programs from without the logviewer in NWA.
Do you have any experience or know of any reference materials to instruct them on where to write their logs, and how to configure NWA to see them?
Thanks
Jibin.Hello Jibin,
Your developers should familiarize themselves with the Logging Framework of the J2EE Engine.
Here is the guide:
http://help.sap.com/saphelp_nw04/helpdata/EN/a2/15ab41d60bcb46e10000000a155106/frameset.htm
If they use the Logging Framework you would be able to access the logs through NWA.
Regards,
Ventsi Tsachev
Technology Development Support (J2EE Engine)
SAP Labs, Palo Alto, Ca (USA) -
See logs for custom programs from without the logviewer in NWA
Hello Experts,
The JavaAS developers want to see the logs for their custom programs from without the logviewer in NWA.
Do you have any experience or know of any reference materials to instruct them on where to write their logs, and how to configure NWA to see them?
Thanks
Jibin.Hello,
Via NWA I am not sure it is possible without logviewer, but via Portal you can if you are able to create an application with help of NWDS which will read log from OS level (need to provide path for default trace in your application) show on frontend.
Then deploy this on portal.
Regards,
Abhay -
Does anyone know of a tn5250 plugin to import on an ASA 5510 so that SSL VPN users can connect to an IBM AS/400 (now called iseries)?
TAC can provide you with a plug-in shell that can be used with a 3rd party Java TN5250 client such as the one below.
http://www.mochasoft.dk/download1java.htm -
How to configure firewall access for ASA 5510
Hi,
This is my first time to use the Cisco ASA 5500 family. I have a request from a user to create an access rule, to allow all LAN traffic to Destination IP address 165.241.29.17, 165.241.31.254 with Destination TCP port 5060,5061,5070 and UDP port 50000-52399.
I want to do this using ASDM, How do I accomplish this?
Thanks,
JojoHey Jojo I use the ASDM to manage my ASA... so below should get you a general access rule to allow what you need.
•1. Log into your ASA using ASDM.. on the top tabs look for "Configuration"
•2. Once you click "Configuration", on the left side panel down at the bottom you should see "Firewall". Make sure you’re in the "Firewall" menu and at the top you should be viewing "Access Rules". You should see a list of access rules applied to your ASA.
•3. At the top you should see a green "+Add" to add a new access rule to your ASA. Once clicked you should identify…
•a. Interface - INSIDE or OUTSIDE
•b. Action - PERMIT or DENY
•c. Source - Subnet that needs to talk to destination address
•d. Destination - use the [...] box to create a Network Object for 165.241.29.17 and 165.241.31.254 use /32 mask for specific ip address and not a range
•e. Service - Again use the [...] box to create TCP and UDP Service Groups for the specific ports
•4. You can then enter a description of the specific access rule and enable logging.
This should be it... let me know how this works out for you!! -
Hi,
I have installed the following on my windows server 2012:
Sharepoint2013
Workflow Manager 1.0: installed and configured
Service Bus 1.0
Service Bus 1.0 CU Update 1
I'm now trying to install the CU2 of workflow manager but I'm getting the following error message in the log file:
[09/01/14 08:02:10] Starting process "C:\Windows\system32\..\sysnative\windowspowershell\v1.0\powershell.exe" -NoLogo -NonInteractive -NoProfile -WindowStyle Hidden -ExecutionPolicy RemoteSigned -File UnifiedWFHotfixUpgrade.PS1 -HotfixType "S"
-PackageType "server" -opcode "PatchBefore" -platform "x64" ...
[09/01/14 08:02:13] Process exit code is -1.
Start-WFHostUpgrade : Login failed for user 'UZuc7KmRZyM5zfaz7kEkjw=='.
At C:\ProgramData\Microsoft\E-Business Servers
Updates\Updates\Uninstall2902007\UnifiedWFHotfixUpgrade.PS1:499 char:5
+ Start-WFHostUpgrade -TargetWFVersion $TargetWFVersion
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : WriteError: (:) [Start-WFHostUpgrade], SqlExcept
ion
+ FullyQualifiedErrorId : WFServiceUpgradeFailed,Microsoft.Workflow.Deploy
ment.Commands.StartWFHostUpgrade
The reason why I need to install this update is to resolve the following error message I'm getting when I try to register workflow service:
PS C:\Users\Administrator> Register-SPWorkflowService -SPSite "http://tcorigli-d
ev01:48668" -WorkflowHostUri "http://tcorigli-dev01:12291" -AllowOAuthHttp
Register-SPWorkflowService : The remote server returned an error: (404) Not
Found.
At line:1 char:1
+ Register-SPWorkflowService -SPSite "http://tcorigli-dev01:48668"
-WorkflowHostUr ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
+ CategoryInfo : InvalidData: (Microsoft.Share...WorkflowService:
RegisterSPWorkflowService) [Register-SPWorkflowService], WebException
+ FullyQualifiedErrorId : Microsoft.SharePoint.WorkflowServices.PowerShell
.RegisterSPWorkflowService
PS C:\Users\Administrator>
Thanks & Regards,
TomiHi,
For a better troubleshooting, I suggest you do as follows:
1.Try to install Service Bus 1.1 before update CU2.
http://www.wictorwilen.se/issue-when-installing-workflow-manager-1.0-refresh-using-powershell
2.PowerShell 3.0 must be installed on the computer to be updated.
3.Check whether install Workflow Manager Client 1.0 on your computer.
4.Make sure you have administrative credentials on the computer.
If the issue still exists, you can also open a ticket to Microsoft Support to get more specific suggestions according to the actual scenario in your environment:
https://support.microsoft.com/?wa=wsignin1.0
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support -
10Mb Metro link between ASA 5505 and ASA 5510
Dear all,
I have encountered one difficult problem, I wished all expert could give my - newie some tips,
Environment
One ASA 5505 - ASA 7.2(1) and ASDM 5.2(1)
One ASA 5510 - ASA 7.2 (1) and ASDM 5.2(1)
These two firewall make site-to-site VPN connection
two ASA has three interface - the one is inside (security level is 100), the another is outside (security level is 0), the finally interface is metro (security level is also 100)
***** I didn't know why around 3 days to one week , these two ASA would hang and make all internal PC cannot access to internet, it need to uplug and replug power, and then the ASA resumed. I didn't know how to shooting this problem, is ASA version is old (7.2(1)), or other problem,
***** I didn't know how to see the log, in the matter of fact, I have already set up a syslog in the one windows server, but I see log, I found no any error log for ASA error or hang message, please everyone.To see the error logs on ASA; telnet to the device and after authentication give command "show log". This will display a long list of log messages. Point out to the log messages that have been logged at the time when the connection went down. Without the error message or syslog message it would not be possible to figure out the problem. Following link may help you to configure ASA for syslog
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00805a2e04.shtml -
Where Can I Find a Complete Reference for ASA 5505 Product IDs?
I've spent way too much time exploring the Internet looking for a definitive reference to pin down and completely explain all of the Cisco product ID mumbo jumbo . . . specifically for the ASA 5505 security device. In general I'd like to have this information for all things Cisco. It is driving me crazy not to know this information IN TOTAL. Yes, there's bits and pieces out there, but no offical guide or reference that details everything. This is what I want to see.
For example: for the ASA5505 there's . . . ASA5505-50-BUN-K9, ASA5505-SEC-BUN-K9, ASA5505-UL-BUN-K9, etc.
What is the "BUN", "K9", "SEC", etc. Not just what does it stand for (we can deduce that), but where did this come from and how can I quickly reference a new acronym which may show up in completely differnce Cisco device. Also, specifically for the ASA 5500 line, I want to see a COMPLETE list of ALL of these IDs and want a legend to reference each part. This is critical in my opinion for a project manager to make an informed decision about hardware. Cisco documentation is grossly lacking for this (or at least I'm unable to find it). The closest I've come was to discovery this whole notion of the Unique Device Identifier (UDI) which is the Cisco' product identification standard for labeling hardware products.
This is explained some here . . .
http://www.cisco.com/en/US/products/products_identification_standard.html
It's a good start but, it only creates more questions. Where can I find ALL the PIDs and what does each acronym stands for? What about the VIDs? . . . Where is a list of these what does each section mean?. Why in the world is there no single source where all of this is pinned down. With all of the mind-numbing Cisco documentation out there loaded with cryptic details about things many of us will never care to know . . . why not put out this much needed, practical reference of Product IDs which would have a wide appeal and could be useful to everyone from product specialist to system engineers? It would make researching Cisco solutions to new projects exponentially less painful to know very quickly exactly what we're looking at when we encounter all of this product "code."
Am I the only one who feels this way? I'm thinking not. What say you? Am I missing something?
LTThere is no such published reference guide. The closest thing would be the global price list but it's generally not distributed. (What Jouni mentioned was probably an extract of that very large document.)
Due to the broad range of products (and associated bundles and services), Cisco uses online configuration and ordering tools (Cisco Commerce Workspace or CCW) internally and with its partners. The information in it is very dynamic and can change day to day as the tens of thousands of products Cisco offers are introduced, deprecated (i.e., Approaching or at End of Sales), offered in different promotional bundles, etc.
When a Cisco salesperson or partner solution advisor talks with a customer, they take the customer's input and build equipment, software and services configuration sets supporting the proposal. CCW will validate the required items are ordered and generate a configuration set that has not only the product IDs (PIDs, generally referred to as SKUs or Stock Keeping Units in this context) but also the plain language descriptions of what each PID means.
They should be conveying that information to you (or any customer they are engaged with) to enable you to make the informed decision you mention. -
Enabling logging for ACF2 OIM 11g
Hi Experts,
I want to enable logging for ACF2 connector, I want to implement the logging in OJDL as per provided by 11g.
But in deployment guide for ACF2 i see under section of enabling logging has:
log4j.logger.COM.IDENTITYFORGE.ORACLE.INTEGRATION.IDFACF2USEROPERATIONS=INFO
The connector is the latest one 9.0.4.18 version.
seems they have still leveraged Log4j.. Does is work in OIM 11g, is there a way to implement OJDL. Please help!!Normally we configure OJDL it will be fine for OIM
http://idmoim.blogspot.in/2011/07/enabling-logging-in-oim-11g.html
what you are pointing is about Ldap Gateway. and ldap gateway still having log4j. go through the connector doc you will get all the required steps
yes for capturing ldap gateway operations log you have to enable log4j.it is fine with 11g as well
below from connector doc:(2.9 Installing and Configuring the LDAP Gateway)
7. To enable logging for the LDAP Gateway:
a. Copy the log4j JAR file from the application server directory in which it is
placed to the LDAP_INSTALL_DIR/lib directory.
b. Extract the log4j.properties file from the
LDAP_INSTALL_DIR/dist/idfserver.jar file.
c. Enter a log level as the value of the log4j.rootLogger variable. For example:
log4j.rootLogger=ERROR, A1
d. Save and close the file.
When you use the connector, the following log files are generated in the
LDAP_INSTALL_DIR/logs directory:
■ idfserver.log.0: This is the main log file.
■ acf2-agent-recon.log: This is the real-time, incremental reconciliation log file
that stores Oracle Identity Manager reconciliation messages. -
I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htmHi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
I just want to open my homepage and see shortcuts, also in a new tab I want to see all these shortcuts.
''want to see shortcuts for applications, sites, add-ons...like in Google Chrome''
No idea what you are talking about, but I do have Google Chrome, so if you tell me what to do in Google Chrome to see what you are talking and perhaps the url if one is shown as well. Sounds like you may be referring to something through Google Chrome extension though.
I don't know if keyword shortcut is any part of the that, you mention shortcuts.
Firefox and other Browser Keyboard Shortcuts (Comparison Table)
http://dmcritchie.mvps.org/firefox/keyboard.htm
Th only keyword shortcuts I think Google has are for search engines. -
How to see logs to verify scripting errors?
Hi,
I am completely new to SAP Sourcing. I am testing couple of scripts, but application is giving to error saying that 'The attached XPDL file contains one or more scripting errors. See log for additional information.' - Can someone please tell me where can I see logs?
Or what is the standard practice to test scripts?
Thanks in advance
YogeshHi Yogesh,
Navigate to the following section Setup->System Administration->System Management->System Information->Logs and click on the first entry. That is the latest log file.
Thanks
Devesh
Maybe you are looking for
-
We have a 4 node Rac, oracle root.sh is failing on the First Node. when I looked at the logs I found the oc4j is timeout to start on Node1 whereas it is able to start on all other nodes with in 2 mins. this is causing to fail root.sh. Can you please
-
Macboor air 13 late 2010 freezes when wake from deep sleep
Hi. I have had this problem for a few months and still havent found a solution. This macbook air freezes and is totally unresponsive for five or six seconds when it wakes from deep sleep. I have tried: 1 Apple hardware test, which came up negative. N
-
Click boxes revert to continue when file moved
For a long time I have been the only Captivate user in my department as a result, I just left the primary file on my hard drive and just put copies in our network drive as a backup. When I did this, I just opened it to make sure it didn't get corrupt
-
Hi All, I need to add EKPO-NETPR and KOMVD-KWERT and pass it to EKPO-NETWR. /: &EKPO-NETWR& = &EKPO-NETPR& + &KOMVD-KWERT& This is not working. Please help me out by giving the way how to add these. Thanks a lot. Regards, Seenu.
-
IPTC Keywords are not comma delimited?
I like the fact that I can now export my photos and get the keywords added to the IPTC keywords field in the JPG. But! Why are the keywords not comma delimited? When I have used other programs (like Photoshop Elements 3) to add keywords, they are sto