Wanting to upgrade from Mac OS X Panther (10.3.9) to Leopard

Hello,
I am wondering if it is possible to upgrade from 10.3.9 to 10.5.4(Leopard), and if so how. I have tried to install 10.5.4 by bypassing 10.4 (Tiger). Now I have an old iBook G4 laptop.
Any help would be most appreciated.
BarrieColt22

Barrie
The others have advised you how to do it, but before you do, I would very strongly recommend that you make a complete bootable backup of your existing hard drive in the iBook.
You should use an application such as Carbon Copy Cloner to make the backup, to an external FireWire hard drive.
The size, measured in Gb, of the external drive should be the total size of the hard drive in your iBook, plus at least an extra 20% (the extra space is needed so that that cloned copy can be configured and organised on the external drive.)
Once you have made this bootable backup and tested it by restarting the iBook from the external drive, then with complete peace of mind you can go ahead and install Leopard on the iBook. All of your existing documents files, etc. are safely backed up to the external drive.
I hope this helps.
"Making a regular bootable backup is one of the Buddha's Threefold Paths"

Similar Messages

Want to upgrade from Mac OS X 10.6.8 to Mac OS X 10.7 , where do i find 10.7?

want to upgrade from Mac OS X 10.6.8 to Mac OS X 10.7 , where do i find 10.7?

You have to call Apple.
1-800-692-7753
Apple will send you a code via e-mail. That can be used to download OS X Lion 10.7.
Best.

Upgrade from Mac OS X 10.6.8 to Snow Leopard

Ok, it's true - I haven't upgraded my laptop in a LOOONG time. I have Mac OS x 10.6.8 and I was told I needed to upgrade to Snow Leopard 10.6.3. But whenever I try it, my laptop just turns off and restarts, I get the gray screen with the apple but that's it. It just sits there, it won't restart all the way. Then I have to do a safe restart and the Snow Leopard still isn't installed...
What am I doing wrong?

10.6.3 is not an update of 10.6.8. 10.6.8 is the last of the Snow Leopard updates. Now you have messed up your old system, so you are going to have to erase the drive in order to re-install Snow Leopard properly.
If your computer came with a version of Snow Leopard pre-installed, then install that from the original software restore discs that came with the computer. Otherwise, use the Snow Leopard DVD you have if your computer originally came with Leopard or Tiger installed on it:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Upgrade from Mac OS X 10.9.5 to 10.10 only

Hi,
I want to upgrade from Mac OS X 10.9.5 to 10.10 only.
Is there a way of doing this without upgrading directly 10.10.2?
Thanks for your help.

Unfortunatley no, You can only upgrade the latest release from apple. If you want 10.10.x versions for the future you will want to download them and keep them on an external drive.

My cd/dvd drive isn't working and i want to upgrade my mac os x10.5.8, how can i upgrade without the software CD

my cd/dvd drive isn't working and i want to upgrade my mac os x10.5.8, how can i upgrade without the software CD

I think not. You will need to order a disc from Apple quoting your serial number, as many of these discs are machine specific. So unless you can get your drive working I think you will have to take a trip to an Apple store.
Indeed, you have an old computer that may not be worth the cost of repair ... but it is still worth seeking Apple advice and a visual inspection. It just might be something not too drastic.

Upgrading from Mac OS Z1-9.1 to Mac OS X.3.2 using an old G4

Hi all,
I'm trying to upgrade from Mac OS Z1-9.1 to Mac OS X.3.2 using my spare and old G4.
I have the Installation CD's but for some reason the G4 isn't reading them so i can't update. Do i have to connect to the internet (currently no connection) to upgrade as far as possible first or is this "giant leap" from OS9.1 to OSX.3.2 just not possible in one go..?
All advice welcome..!

You're Welcome Shane!
Tiger is available for purchase at The Apple Store (U.S.).
Panther, is no longer available directly from the Apple Online Store, as Tiger 10.4.x is the most up to date OS.
If you know what to look for, a Full Retail Version, of the Panther Install CDs, or a Full Retail Version, of the Tiger Install DVD, can also be purchased rather inexpensively, at some online Apple retailers, Amazon, eBay, FastMac, AppleRescue, etc.
Be sure not to again purchase grey, upgrade or machine specific CDs or DVDs.
Panther is only on CDs, not DVDs.
Unless purchased from AppleRescue, the discs should look exactly like the images in the above links, and not say Upgrade, or CPU Drop-in DVD, on them.
The discs should also not say "This software is part of a hardware bundle purchase - not to be sold seperately."
Once Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final version.
If your Mac meets the Tiger System Requirements, you could also consider installing that, and then use the PPC 10.4.9 Combo Update, to upgrade to the current version.
Panther System Requirements
Additional Panther System Requirements
Additionally, "Tiger ships on a DVD, but if your Mac doesn’t have a built-in DVD-ROM player, you’ll need CD media."
AppleRescue, also sells a Tiger installation set on CD.
Shop Carefully, Examine All Documentation, And I Wish You Success!
ali b

Can i use facetime if I upgrade from Mac Os 10.8 to lion?

Can someone tell me if it's possible to use face time on my mac book pro after this update? Alss Icloud?

can i use facetime if I upgrade from Mac Os 10.8 to lion?
Your question is backwards, we must assume that you want to upgrade from Lion to 10.8.

How do I upgrade from Mac Os 10.6 to OS X V10.6 ?

How do I upgrade from Mac OS to OS X v10.6 as I want to use an HP Deskjet 2540 All-in-one printer?

Clarify, what version of OS X do you have currently, 10.5 or 10.6?

I want to upgrade from my current version of Flash v11.9.900.117 to the current v11.9.900.152. On cl

I want to upgrade from my current version of Flash v11.9.900.117 to the current v11.9.900.152. On clicking on the Flash player link in the Downloads section of the Adobe home page I am taken to what looks like the 'Flash Player' download page with an 'install Flash' button in the bottom right hand corner. However, when I click on this button I am directed back to the Adobe home page. Could this be something to do with my AV?.

Bypass the downloader/installer and download the Adobe Flash Player installer directly by clicking one of the following links.
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Flash Player (Mac OS X)

I want to upgrade my Mac 10.8.5

I want to upgrade my Mac 10.8.5. How do I do this. I live in the UK.

10.8.5 is Mountain Lion.
You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac Mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
iCloud system requirements:
http://support.apple.com/kb/ht4759
If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
http://store.apple.com/us/product/D6106Z/A/os-x-lion

I have a mac os 10.5.8, i want to upgrade to mac os snow leopard, can i keep all my files (documents, music on itunes) without backing up all the files first on a external device prior to the upgrade?

I have a mac os 10.5.8, i want to upgrade to mac os snow leopard, can i keep all my files (documents, music on itunes) without backing up all the files first on a external device prior to the upgrade?

I strongly advise against upgrading the OS without first making a backup. Were something to go wrong you would lose all your files without the backup. See:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s).

I want to upgrade from Photoshop Extended CS5 to PS Extended CS6 (I do NOT want CC) but have been unable to find this at a sensible price (or sometimes at all). Help, anyone please?

I want to upgrade from Photoshop Extended CS5 to PS Extended CS6 Mac (I do NOT want CC) but have been unable to find this at a sensible price (or sometimes at all). Help, anyone please? This is in UK, btw!

What do you consider a sensible price? PS CS6 extended is available only when you purchase the CS6 Suite, which is around $1000 for the upgrade from CS5. PS 6, which is not extended, is about $200, but I'm not sure about upgrading to a single app from a suite. Adobe used to allow it, but I'm not sure about now. PS CC and Lightroom 5 combo is $9.99 a month or PS CC alone for $19.99 or the whole CC suite for $29 a month. The latest CC apps are "extended."

Can I upgrade from mac OSX 10.6.8 to 10.8?

Can I upgrade from mac OSX 10.6.8 to 10.8?

Same list as stedman1, but uses model numbers which is slightly more accurate.
Check that your computer is compatible with Mountain Lion.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
iMac (Mid 2007 or newer) model number 7,1 or higher
MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
MacBook Air (Late 2008 or newer) model number 2,1 or higher
Mac mini (Early 2009 or newer) model number 3,1 or higher
Mac Pro (Early 2008 or newer) model number 3,1 or higher
Xserve (Early 2009) model number 3,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better)
8 GB or more of available space
Check to make sure your applications are compatible. Application Compatibility
If you have applications that you want to use that aren’t compatible, you can retain Snow Leopard and create a new partition to install Mountain Lion on or you can run Snow Leopard server in a virtual mode.
If your computer isn't compatible, you might be able to upgrade to Lion. Computer Compatibility - Lion
If you can/do upgrade, I recommend you make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again.

I want to upgrad from OS X10.5.8 to 10.6.8 or higher, but my DVD drive is not working. Is there the possibility to buy an online Update?

I want to upgrad from OS X10.5.8 to 10.6.8 or higher, but my DVD drive is not working. Is there the possibility to buy an online Update?

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
If your hardware supports more recent versions then:
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

I want to upgrade from OS X 10.5.8 to Snow Leopard. When trying to back-up to a WD 1 TB external drive, the back-up process stalls at about 4 GB. Grateful for any clues to assist with the backup issue please.

I want to upgrade from OS X 10.5.8 to Snow Leopard, then to Lion. When trying to back-up to a WD 1 TB external drive, the back-up process stalls at about 4 GB download. I would be very grateful for any clues to assist with the back-up process please.

That disk is very probably formated as FAT 32, the normal format for PCs. FAT 32 cannot support files larger than 4 GB; also, it corrupts some types of Mac OS files. If you want to securely backup your mac files, you must have a disk prepared for Mac OS.
Therefore, open Disk Utility, choose again 1 partition for your external disk and, under Options, GUID partition map (it may also be a boot disk for an intel mac), then format it as Mac OS Extended Journaled. Y0u are done.
If you want to exchange data with PCs, you should chose Master Boot REcord and NTFS format, for this you must use a additional utility like NTFS-3G. But note that mac files may also get corrupt in NTFS format.

Wanting to upgrade from Mac OS X Panther (10.3.9) to Leopard

Similar Messages

Maybe you are looking for