Wanting to use more than one time entry in cube

My original question came from joining tables to be used in a cube. This all works fine now but for my specific application I want to join tables with the following specifics.
Both tables contain the key ID
Table 1 contains a Payment Type 1 date and amount - eg. TV 001 commission paid 1 JAn
Table 2 contains a Payment Type 2 date and amount - eg  TV 001 payment received 3 FEb
I wanted to join the tables because there are a lot of attributes in TAble 1 that I'd like to use and have in the same entry line. But now it seams that the cube is not going to allow me to enter 2 dates, even if each is assigned to different key figures. (Or maybe I don't know how to set that up)
The other possible solution that I can think of is to somehow get the attributes from table 1 and keep the entries seperate

Is ZDATE  just a custom name you entered. Why does it create the 0CALDAY attribute, I thought you would have to specify this.
Do these attributes still fall under the Time Dimension or do I have to create a different dimension
Edited by: corne.potgieter on Mar 11, 2009 12:22 PM

Similar Messages

  • Using more than one time delay in a thread

    Hello,
         I need to use two non-consecutive time delays in a thread. My thread typically proceeds as follows:
    1. Tell an oriel MS257 to change wavelengths
    2. Time delay #1 to give the MS257 time to change
    3. Tell HP 4156C to start sweeping
    4. Poll the 4156C until sweeping is complete
    5. Time delay #2 to give 4156C time to load data
    6. Read/parse/save data
    My problem is that the second time delay seems to start counting immediately after the first one - it does not wait for the sweeping to complete before counting. My VI is attached. It's a bit messy - organizational tips are also welcome!
    Thanks,
    Ying 
    Solved!
    Go to Solution.
    Attachments:
    TFTmeasure.vi ‏115 KB

    Looking into the sources show: Cleanup is a nice tool (even thought it is far from perfect )
    Well, nevertheless, from the wireworking, it seems alright that the second Time Delay express VI should indeed wait for the loop to finish. Therefore, i am wondering why it is skipped. And the only reasonable explanation: You have an error on the error cluster.
    So please debug into it using highlight/probes on the error cluster to make sure that you are not running into issues here.
    hope this helps,
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • Using more than one time capsule

    Is it possible to backup my MBP to 2 different time capsules in 2 different locations and have the same backups? for instance, I'd like to back up my MBP at home every hour and also backup at my office every hour when I'm there.
    I'd like both to back up anyhting new as of the last backup on that time capsule so i end up with duplicate backups in the event that something happens to either time capsule.
    thanks.

    Yes, you can do this. It's an excellent strategy.
    You will have to tell TM each time you swap, via TM Preferences > Change Disk.
    And the first backup after the swap will take somewhat longer than normal.
    You'll have two, independent sets of backups. They won't be the same, exactly, as they'd be done at different times, but the result would be nearly the same.
    Each would be current as of the last backup performed to that particular disk.

  • Can I use more than one Apple ID for an Apple TV?

    I wanted to use more than one Apple ID account on my Apple TV, is that possible?

    Welcome to the Apple Community.
    You can only use one ID for purchasing from the Apple TV, but you can stream content from multiple libraries even though they have different ID's

  • Can I use more than one transition when creating a slideshow in IDVD

    I want to use more than one transition in IDVD when creating a slideshow, is this possible?

    Not so. Under Windows select Photos.
    That will show the Media Browser in the lower right hand corner of iMovie.
    Use the File ➙ New Project to create a new project.  Select the photos from iPhoto you want to create a movie from and drag into the new project area.
    From there add your transitions, music, etc.

  • How to use more than one JCo in one project?

    hi all,
    I want to use more than one r/3 systems and want to switch between them while running the application.
    For that, how can I use more than one JCo connection in one project and how to activate/deactivate them so as to switch in between them? And if that possible then what am I suppose to do in order to fetch the data from activated R/3 while running the application.
    Regards,

    Hi,
    Try this threads
    Multiple Client Logon in JCO
    Multiple JCO client connections
    Regards
    Saravanan K

  • Use more than one transition in the same time between two video clips?

    Dear Premiere Pro programmers,
    Could you please create a way to use more than one transition in the same time between two video clips without exporting to media, or creating new sequence, or using another layer (adjustment or transparent)?
    Message was edited by: Kevin Monahan
    Reason: Next time, create a more descriptive title.

    Hi Aqsa Nori,
    I'm not sure what you are imagining, but it might be possible to achieve by key framing effects. Can you tell us what you want to do? Also, please feel free to file a feature request: http://adobe.ly/feature_request
    Thanks,
    Kevin

  • Can on use more than one hard drive to backup with time machine ?

    Can one use more than one hard drivewith time machine ?

    Yes, if you have the Mountain Lion operating system installed on the Macs that you want to back up.
    I don't know what the maximum number of hard drives might be, but I have tested with 4 and it works fine. Time Machine automatically rotates the backups when you do this, so drive #1 will be backed up first, then #2, #3, etc. and then back to #1, etc.

  • Can I use more than one bluetooth device at a time with my iphone4

    Can I use more than one bluetooth device at a time with my iphone4

    Anthony
    I have a Plantronics 975 earpiece that works very well with my Razr.  I
    just got a Panasonic KX-TG7873S phone system for my home, it has a
    "Link-to-Cell" cellular convergence solution, from what I understand it is
    just Bluetooth enabled.  I have paired both device with my Razr.  In
    settings, Bluetooth setting, both device show.  But only one device can
    connect at a time.  If my Plantronics is connected and I choose the
    Panasonic device, the Plantronics device disconnects and the Panasonic
    device then says it is connected.  Both devices work when they
    are connected.  Is it because they are both "headsets"?
    So, to have to remember to connect to one or the other device, depending on
    weather I am coming or going is not practical.
    On Sat, Sep 14, 2013 at 1:14 PM, Verizon Wireless Customer Support <

  • Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

    Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

    As long as the profiles are different (ex. HID vs AD2P) you will not have any issues. But say if you try to use 2 keyboards at once, it won't work. Or 2 headsets at once. Your scenario seems fine.

  • Multiple AirPort Express units - use more than one at a time?

    If I connect three Airport Express units in three different rooms, can I use more than one at a time?
    Can I choose to only use 2 out of the 3 at one time?
    Thanks.

    Yes. With iTunes 6.0.2 or later, you can send an AirTunes stream to multiple remote AirPort Express units, provided that each AirPort Express has the latest AirPort firmware. The maximum number of remote AirPort Express units is three to six in typical conditions. The number that works for you will depend on your environmental conditions (such as building composition and local radio interference), distance to the remote AirPort Express units, and available network capacity relative to your other usage.

  • Using More Than One App At A Time

    Does anyone know if there is a way to use more than one app at a time? It would be nice to get back to the home screen without quitting an app if you are in the middle of something.

    I know I have seen some apps that specifically say that they can be used while surfing the web, etc. It may be a function of the app that it can continue to run while you're doing something else. I'm kind of surprised that a radio app wouldn't allow for that.

  • Can I pair and use more than one set of bluetooth speakers at the same time on my ipod touch 4.0

    can I pair and use more than one set of bluetooth speakers at the same time on my ipod touch 4.0 or Iphone 4s or Ipad 2?

    You can only connect to one device at a time using Bluetooth, See article below for more information.
    http://support.apple.com/kb/ht1664
    While your iOS device can maintain multiple pairing records, it can only connect to one headset or hands-free device at a time. This prevents your iOS device from sending your data to the wrong Bluetooth accessory.

  • Using more than one input device at the same time

    Is it possible to use more than one input device at the saem time in logic express. For example I have a fire wire input device and a usb input device can I get Express to recognize both of these at once and so have a total of 4 ins which would be great since Im transfering tracks off my ADAT and it would be less track to have to line up.
    Thanks

    Hi,
    yes, it should be possible by creating an aggregate device. Google for it or search this forum. There are many tutorials how to set it up.
    Have fun!
    Fox

  • How to share more than one Time Machine folder

    Hi,
    With Snow Leo Server I found how to find how to share more than one Time Machine Folder but I can't see how to do the same with Lion Server, could you help me with that ?
    The goal of that is to offer one TM folder per user which is located on a dedicated partition in order to limit the size of TM backups per user (150Gig).
    In Lion, in can only share one TM folder for everybody and I didn'tfind if I can set a limit size per user...
    Thank you in advance,

    I have figured out a way to enable multiple backup targets.
    However, it's one of these things I wouldn't want to describe to anyone except true programmer types, because everyone else has a 90%+ chance of messing up their system if they do something wrong.
    It involves turning off file sharing, and then editing the plist files in /private/var/db/dslocal/nodes/Default/sharepoints/
    The gist of it is this:
    a) first create all the share points you later want to use for TimeMachine, and set them up for afp-only file sharing, also create one TM target, which you can either use later, or have there so the system has one entry it knows how to handle. I just made a bogus one that I'm not actively using.
    b) turn off file sharing in Server.app
    c) turn off TimeMachine in Server.app
    d) now you can edit the files, the easiest is with Xcode, so you may want to install that first
    e) for each sharpoint you made in a) there will be a corresponding .plist file in the location indicated, these are the files that need to be edited.
    f) for each of these files
         1) the item0 string property in the timeMachineBackup array must be switched from 0 to 1
         2) a new key of type array with the name timeMachineBackupUUID must be created
         3) in the newly created array an item of type string must be placed with the value of a UUID, which can be created with the shell command uuidgen
    g) make sure all the edited plist files are saved
    h) turn on TimeMachine in the Server.app again
    If all went well, you now should be able to go to one of your networked client computers and see all the time machine share points just created as options for being a time machine target.
    Anyway, if you go that route: be careful, don't blame me if you muck things up...

Maybe you are looking for

  • Idoc segment field length changes

    Hi friends,, I am new to idoc. My requirement is in my segment i am having 5 fields and also this segment is already realeased one. i wnat to change the field length from 10 to 20 . how to do this ? actually what i did is 1. i cancel the release for

  • Re-assign automation data

    Would anybody know a quick way of re-assigning automation data, for instance from volume information to filter up and down?

  • Illustrator error opening eps file exported from sketchup pro 8

    When I attempt to use Illustrator CS6 to open an .eps file exported from Google Sketchup Pro 8 I get the following error message "the file is an unknown format and cannot be opened".    If I try to place/link the file I get this message "can't place

  • Offline exporting of sms from pc suite.

    I have loads of messages on my pc suite but i no longer have the phone associated with them. How can i extract them from the program? Thanks.

  • Space Reorganization after client delete.

    Hi Gurus,       I have a doubt in reorganization of  space after client delete.        I have created a client and the client copy(local) was done successful. Now i want to delete the client and want to clear  the space occupied by  the new client (a