Wanting to use multiple monitors on HP hpe210Y w-DVI-I and HDMI. Audio: 5.1 Surround

I have a HP Elite hpe210y with only two outputs of which are: 1) DVI-I and 2) HDMI. My  situation is that I have 2 new HP Monitors with VGA Cables. I have an adapter for DVI-I to VGA and also VGA to Dual VGA. I do NOT want the monitors to work as Duplicates however. I want the second monitor to be an extension. I am also interested in getting even 2 more monitors in teh near future for a total of 4.
Is there some way I can get two monitors to work off one DVI-I ?
Will I be able to upgrade to up to 4 monitors? 
Is there a part I need?
Wanted to mention that my OS is Win7 Home Premium 64 bit. I use IE9, Chrome and Firefox
I would of never bought this from Best Buy if I had known in advance that there was just the one regular output. I see they have one called a Phoenix which I may look into.
Thank you in advance for your time and consideration.

>Is there some way I can get two monitors to work off one DVI-I ?
I've not yet seen a solution for that.
You can use a hdmi2vga adapter for the second port.
>Will I be able to upgrade to up to 4 monitors?
>Is there a part I need?
you can try one of these:
http://www.evga.com/products/pdf/100-U2-UV19-TR.pdf
http://www.amazon.com/Kensington-Universal-Multi-Display-Adapter-Black/dp/B002F9NSMQ/ref=pd_cp_e_1
http://aluratek.com/usb-2-0-high-resolution-vga-adapter
They will use your current graphics device.
If you are looking for a new solution - I've read about DisplayPort version 1.2 that can do 'daisy-chain connection' with multiple monitors. But this you have to 'google' yourself.
HTH
V.
*** Say 'Thanks' with Kudos ***

Similar Messages

  • I have 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II.  How do I connect?  4000 only has 1 Display Port and 1 DVI.  5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute?

    I just bought a 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II.  How do I connect?  4000 only has 1 Display Port and 1 DVI.  5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute any work at all?  I read where on a PC they would work together, but on a MAC they do not.
    I read that Display Port has higher band width than DVI, NEC monitors for best performance they recommend using DIsplay Port.
    When I was setting this up I looked at a Nvidia Quadro 4000, unfortunately it was for PC, it had 2 Display Ports, in the Mac version they reduce it to one.  I did not think there could be a difference.
    Mainly want to use it for CS6 and LR4.
    How to proceed??? 
    I do not want to use the Quadro 4000 for both, that would not optimize both monitors, one DP and 1 DVI.  Using just the 5770 would work but I do not think the 4000 would be doing anything, and the 5770 has been replaced by the 5870.more bandwidth.
    Any ideas, I am a Mac newbie, have not ever tried a Mac Pro, just bought off ebay and now I have these problems.
    As a last resort I could sell both and get a 5870.  That would work, I'm sure of that, it's just that I wanted the better graphics card.
    Thanks,
    Bill

    The Hatter,
    I am a novice at Mac so I read all I can.  From what I understand the NEC monitors I bought require Display Port for their maximum performance.  The GTX 680 only has DVI outputs.  Difference from what I understand is larger bandwidth with the DP.
    You said I have the 4000 for CUDA.  I am not all that familiar with CUDA and when I do read about it I do not understand it. 
    A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000.  Is the 4000 doing anything with nothing connected?  I read where in a PC system the 2 cards would interact but in a Mac system they do not.
    Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
    So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
    I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are.  I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4.  Those NEC monitors are supposed to be top notch.

  • I cracked my screen. I want to use other monitor which I had one. I bought Apple Mini-DP to VGA adapter. It worked. It means I can see ADDITIONAL screen. However I want to use this monitor for the main screen. How can I do?? Please help.

    I cracked my screen. I want to use other monitor which I had one. I bought an Apple Mini-DP to VGA adapter. It worked. It means I can see ADDITIONAL screen. However I want to use this monitor for the main screen. How can I do?? Please help.

    You have the display set in Extended Desktop mode. The Menu Bar and Dock will be on the MacBook display and your background screen on the monitor. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the monitor and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse.  http://support.apple.com/kb/HT3131 When you disconnect from the monitor your Menu Bar will automatically change back to the MacBook.

  • Wanting to use multiple transitions on 1 slideshow?

    I want to make a slideshow for graduation party. This will be played continuously. I want to incorporate different transitions on one. I've read that you can to do it if you use slideshow from iphoto. I can not seem to get past the files when I click on media, photo. Slideshows don't show up. This is my first attempt with wanting to use multiple transitions. I've made DVD's with chapters. Plus, I never have used it as continues play. Any help and ideas would be a welcome.
    Thank you,
    Lisa

    In iPhoto, put your photos into an album. Then, open your album to display the photos that you put in it. Select all the photos. At the bottom of the album display window, there will be an icon called Slideshow. Click on it, and the photos that you selected will be placed into a slide show with a separate icon in the display panel. In the slideshow transition settings, select Random. That will play the available transitions at random.
    If you want more flexibility than iPhoto's "Random" setting will give you, you will need to create your slide show in iMovie where you can manually insert any of iMovie's transitions. Then drag your iMovie project icon (the one with the star on it) into the window of your iDVD project.

  • My question is in regard to pc to mac migration. How do I migrate information from my pc with specific user account to an existing user account on my mac? I do not want to use multiple mac user accounts.

    My question is in regard to pc to mac migration. How do I migrate information from my pc with specific user account to an existing user account on my mac? I do not want to use multiple mac user accounts.

    https://discussions.apple.com/message/16371308#16371308

  • When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back.  I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor.  How do I stop this?

    When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back.  I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor.  How do I stop this?

    Does Firefox switch to full screen if you press F11 ?
    You can also try the F10 key to see if that brings up the menu bar.
    * If the above steps didn't help then see http://kb.mozillazine.org/Corrupt_localstore.rdf
    Note: Do not delete localstore.rdf in the program folder (Windows: "C:\Program Files\Mozilla Firefox\defaults\profile\") (Mac: "/Applications/Firefox.app/defaults/profile/")

  • I want to use multiple colors in the same box - Pantone plus process. I am trying to create a support plate of cyan under a PMS.

    I want to use multiple colors in the same box - Pantone plus process. I am trying to create a support plate of cyan under a PMS.

    How is the external drive formatted?
    Allan

  • Hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works

    hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works..then if i leave it a while and try iy agian its disapeared of my network...i have a bt hub 3 ....any help please ..im not sure if itsa faulty express

    I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
    When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

  • HT204053 Enter the Apple ID you want to use for iCloud in Control Panel Network Internet iCloud.  Enter the Apple ID you want to use for store purchases (including iTunes in the Cloud and iTunes Match) in iTunes iTunes Store.

    Enter the Apple ID you want to use for iCloud in Control Panel > Network > Internet > iCloud. 
    Enter the Apple ID you want to use for store purchases (including iTunes in the Cloud and iTunes Match) in iTunes > iTunes Store.

    Welcome to the Apple community.
    iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
    For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

  • How do I download the music from iTunes onto an old iPhone 3gs? I have reset the iPhone to factory settings and when I plug it in it wants to use the device name for my current iPhone 5 and I don't want to change anything on my old iPhone.

    How do I download the music from iTunes onto an old iPhone 3gs without affecting my iPhone 5? I have reset the iPhone to factory settings and when I plug it in it wants to use the device name for my current iPhone 5 and I don't want to change anything on my current iPhone. iTunes won't let me change the device name for the 3gs. I just want to use the old iPhone like an touch.

    Hi littlemansa,
    If I am understanding you correctly, it sounds like you are returning to an old iPhone that has been erased and you would like to set it up as a new device without restoring from a backup which would affect the name of your iPhone, as well as the contents therein. I have an article for you that can help you set up your iPhone as a new device, and that information can be found below:
    How to erase your iOS device and then set it up as a new device or restore it from backups - Apple Support
    http://support.apple.com/en-us/HT4137
    Basically, it seems like you may be stuck on a screen that is asking if you would like to restore your device from the backup that is filed under the name of your new iPhone, or if you would like to set up the device as a new device. I would suggest that you set it up as a new device to achieve your desired results. 
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • I want to use Get Panel Image in Labview 5.0.1 and need details on how to save the BMP data generated

    I am trying to generate an application that saves a copy of its front panel on completion. This is easy to do using an invoke node with Print VI to HTML but this does not work in an .exe format. I have seen elsewhere that you have to use the Get Panel Image method, but no details are supplied in LV 5.0.1 documentation of how to use the "image" data (1-D Unsigned Byte array) that is generated. I want to save this in a format that can then be read as a bitmap in any standard graphics package. Any assistance?

    Hi,
    If you'd upgrade to LV5.1 or 6 you could use the 'standard' vi's for this.
    You need a VI called "Write BMP File.vi". It's not shipped with LV5.0.1.
    This vi only uses 3 subVI's, so perhaps someone at NI can convert it and
    send it to you (sorry, I won't, it's copywrited).
    If you cannot get this VI anywhere, you'll need to figure out the BMP file
    format yourself. It's not too complicated, but still could take some days.
    Perhaps someone figured it out before LV5.1 was released.
    Regards,
    Wiebe.
    "RDK" wrote in message
    news:[email protected]..
    > I want to use Get Panel Image in Labview 5.0.1 and need details on how
    > to save the BMP data generated
    >
    > I am trying to generate an application that saves a copy
    of its front
    > panel on completion. This is easy to do using an invoke node with
    > Print VI to HTML but this does not work in an .exe format. I have seen
    > elsewhere that you have to use the Get Panel Image method, but no
    > details are supplied in LV 5.0.1 documentation of how to use the
    > "image" data (1-D Unsigned Byte array) that is generated. I want to
    > save this in a format that can then be read as a bitmap in any
    > standard graphics package. Any assistance?

  • Hi, I want to use my number for iMessage on my iPhone only and on my macbook pro use my apple id/email and not my number. Also how do i stop the iMessages on my mac appearing on my phone.

    Hi, I want to use my number for iMessage on my iPhone only and on my macbook pro use my apple id/email and not my number, how do i do that? before i updated my phone thats what it was like but now that ive updated i dont know how to change it. Also how do i stop the iMessages on my mac appearing on my phone. can you please help. Thanks

    I tried that but on my iphone i can only click on my email and my number is checked but its in grey doesnt allow me click on it and on my Mac, its the opposite, my email is checked but in grey so doesnt allow me to click on it. im realy confused

  • I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this

    I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this? I gace tried the System Preferences -> Sharing, shared internet to Ethernet, but can't se ethe device on Finder

    Djembe wrote:
    UEFI (unified extensible firmware interface) boot requires Global unique identifier Partition Table (GPT) as opposed to the older Master Boot Record (MBR). If your existing drive is formatted in MBR, you will need to adjust BIOS settings to enable legacy boot in order for it to work properly.
    Is there a performance difference between GPT and MBR? If GPT is better, I do not mind formatting the drive with it.
    5. No special drivers are needed.
    Thanks. What about the thunderbolt port?
    7. I think Lenovo estimates 6 hours.
    Lenovo says 6 hours with the 6-cell battery on its website.
    BrendaEM wrote:
    Hi,
    There was a serious BIOS/UEFI problem with that SSD . Perhaps this thread will save you some headaches. Someone is recomending shutting off Rapid Boot in the setup, which would probable mean little with a SSD, anyway.
    I read through this, and it looks like the problem was fixed in a BIOS update, which I plan to do. However, it also seems like Intel Rapid Start is not even worth it in the first place, as sleep consumes almost no power at all.
    W540: i7-4700mq, K2100m, 8 GB DDR3L, 512 GB SSD
    T510: i7-620m, NVS 3100m, 8 GB DDR3, 512 GB SSD

  • I want to use an external microphone for both my iPhone 5S and my MacBook Pro. This is for music and for making recordings outside such as birds. Any suggestions?

    I want to use an external microphone for both my iPhone 5S and my MacBook Pro. This is for music and for making recordings outside such as birds. Any suggestions?

    use a splitter something like this
    http://www.amazon.co.uk/3-5mm-Headphone-Splitter-Cable-iPhone-White/dp/B003W37DS E/ref=pd_sxp_grid_pt_2_1

  • HT2242 I am British, live in Spain, and want to use my UK credit card for my iTunes account and use English, but can't find a way to do this. Can anyone help?

    I am British, live in Spain, and want to use my UK credit card for my iTunes account and use English, but can't find a way to do this. Can anyone help?

    under usage-i only have the camera roll, photo library and photostream-they don't show the individual albums withing my libraries-if i delete library-i would delete about 12 albums
    I don't sync pics but was hoping the albums showed up there.  It was a long shot.

Maybe you are looking for