Wants to activate batch management for a material which already had a Stock

hi,
i want to activate batch management for a material which already has a stock and open Purchasing documents.
is there any way by which we can do it without removing the same.
please help.

program name is RVBCONVMAT2BM
but i am doubtfull it will be delivered with standard SAP, you need to request you from SAP as they charge for this.
this program convert the material to batch and all relevant dependant documents will be updated with batch no.
Regards,
Pravin Mukkawar
pasting some description of the program
REPORT rvbconvmat2bm.
Report illustrates the call of function module VBZ0401_CONVERT_OBJECTS
which sets the batch management flag for one material including
depending objects. Function module VBZ0401_FILL_BUFFERS helps
improving the performance.
then logic......

Similar Messages

Is it possible to activate Batch Management for a material without Class?

Dear Experts,
Is it possible to activate Batch Management for a material without having Class & Characteristics maintained. As my requirement is to procure Fuels in Batches only with external no. assignment without any parameters to be checked at the time of Goods Receipt? Batches are needed for Accountability purpose.
Regards

>
Chandan H N wrote:
> Dear Experts,
>
> Is it possible to activate Batch Management for a material without having Class & Characteristics maintained. As my requirement is to procure Fuels in Batches only with external no. assignment without any parameters to be checked at the time of Goods Receipt? Batches are needed for Accountability purpose.
>
> Regards
Please check this answered link:
Batch-classification view
If you want classify a batch, then you should have maintained the batch classification in material master which is either class 022 or class 023 (depends on your batch level set in cusotmizing). The material class 001 has no impact on the batch classifcition, it is what it is: a classification for the material.
Edited by: Afshad Irani on Jun 20, 2010 4:40 PM

PR for the material which is out of stock

Hi All,
can anybody tell me how e can create a PURCHASE REQUISITION for the material which is out of stock?

Hi,
Use ME51N to create purchase requistions. Also please read the SAP help documnetation before posting basing questions.
Regards
Sreekanth

Removal of batch management for a material in MM02

Hi all,
I Have a problem in removing the batch management in the purchasing view of a material.The error is 'Batch management requirement cannot be changed,Batch already exists'.
PO is created on this material.GR is done and that GR is reversed.There is no stock in the previous period.In MSC2N batch is deleted.I tried even after deleting the item in the PO.Again system is giving the same error.
Now how can i remove the batchmanagement for the material.
Thanks,
Rambhupal reddy

your batch is probably only flagged for deletion. You have to run archiving, Transaction SARA for object MM_SPSTOCK to get rit of the batch record.

I want to activate Color Management Suite from purchase via internet photoshop, illustrator and indesign, how? thank you for your reply

I want to activate Color Management Suite from purchase via internet photoshop, illustrator and indesign, how? thank you for your reply

hello, I already Bridge CS6 installed but can not be accessed by the> parameters color edition menu. The message said that eereur lme Suite Color Management is not enabled. What should I do?
De : gener7 <[email protected]<mailto:[email protected]>>
Répondre à : "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date : mardi 9 septembre 2014 14:20
À : jp <[email protected]<mailto:[email protected]>>
Objet : I want to activate Color Management Suite from purchase via internet photoshop, illustrator and indesign, how? thank you for your reply
Download and install Bridge CC, then in the Bridge Edit menu > Color Settings choose the color settings you want to synchronize your CC apps to.
ATTENTION Le message contenu dans cet email ainsi que dans tout fichier attaché est destiné exclusivement aux personnes dont le nom figure ci-dessus. Il peut contenir des informations confidentielles ou protégées par le secret professionnel et dont la divulgation est strictement prohibée. Si vous avez reçu cet email par erreur, détruisez-en le contenu. Vous n'êtes pas autorisé, dans cette hypothèse, à copier, distribuer ou conserver ce message. Merci.
WARNING This information in this mail and in any attachments is intended for the above-mentioned addressees only. It may contain privileged or confidential information the review, dissemination or disclosure of which is strictly prohibited. If you have received this email by error, please destroy it. In this case, you are not authorised to disclose, copy, distribute, or retain this message or any part of it. Thank you.

Batch Activation for existing material

Dear All,
We have uploaded material last year that time we are not used batch management, now our clients requirement is to activate batch for the existing material, this materials has lot of transactions & stock is availabele in unresticated, Quality also,
so please guide me & how to activate batch,
if i trasfer this material to create stock zero but its very critical bcz we have 80000 material codes.
please suggest me.
Thanks
Shital

Hi,
Batch management of existing material can not be done if it has stock and value.You can keep stock value NIL (By reversing) and then proceed with batch management.
For more check the link:
https://wiki.sdn.sap.com/wiki/display/ERPLO/Batch+Management
Regards,
Biju K

Changing Batch Management Level from Material to Plant

Hi all,
We are investigating changing our batch management level from material to plant to meet business requirements.
SAP has pointed us to a note with a program to reset the batch level, as well as highlighting some things to look out for.
I've conducted the change in a playpen system and so far it looks relatively straightforward, with complexities arising only when characteristics exist, or when a batch exists in multiple plants.
Seems that batch master data is moved from MCH1 to MCHA, including the object link number to classification. Unfortunately it seems a limitation of the conversion is that the batch master data is copied to ONE plant only in MCHA, no doubt due to the fact the object number link to classification must be unique.
My question is this: has anyone performed this change before, and if so can you offer me any advice on what to look out for, or potential problems that arose after the change?
Any help or comments are appreciated.
Mark.

hi..
first of all try this simple one...
You will have to delete all the materials, remove stock and then switch the batch management flag.
Or
To convert the batch from plant level to material there is Conversion Program defind by the SAP...
1. For all releases lower than Release 4.5B, implement the corrections and the modification in the report RM07CHDX as described in the correction instructions.
2. Create the report ZCHTCUCH, which is specified in the attachment.
3. Run this report in the clients for which you want to reset batch level to plant level.
4. Call transaction OMCT.
5. Check whether the batch level for "Batch unique at plant level" is set.
6. Implement Notes 821891, 944278, 950540 and 1091613 if you have not already done so (or you have not imported the corresponding Support Package).
7. Execute the function "Batch Level -> Conversion".
8. Define a plant for a plant view that may be missing.
9. Always execute the report in the test mode first. Analyze the error log.
10. If no errors occur, you can execute the report in production mode.
11. If you are working with batch long texts, first execute the report ZM07CHDX_TEXT in test mode.
try this out..hope is works,,
Thanks..

Automatic batch management for Production order receipt

Hello ,
I have a requirement to setup & activate Batch Management only for Production order Good Receipt . I am looking out for what all configuration / data setup will be required to complete this .
To start with I have following questions .
1. Whether such activation is possible only for Production order Good receipt - 101 mov.type
2. IF yes , is Batch management activation status be at material or plant level .
3. As I need automatic assignment , should I be selecting Internal batch management .
4. What should be selected for valuation for Goods movement in Inventory management.
5. Is it necessary to have batch determination by maintaining Condition tables / Access sequence
6. What would be standard Class / characteristics to be maintained for automatic determination.
Also I will have to work with the running system where Material are already active and have stock in system . What precautions will I have take if I have to activate the Batch Management in a running system.
Appreciate all your expert advise.
Regards,
Lawrei

Thanks Adler for your comments .
With reference to your point , need further clarifications
1. If batch management is selected to material , this means that it will be active for all movement types for Inventory and cannot be restricted to 101 mov.type .
I see that in config node
+Define Batch Creation for Goods Movements+
    +Using this function, you can define for each movement type whether a new+
    +batch is created for a goods receipt and how it is created.+
Can I not restrict batch creation only for 101 movement , but again here I don't have options to select only for Good receipt for order - Tran/Ev type - WF .
& what about below config node
+Define Batch Creation for Production Order / Process Order+
    +In this step you can make the following settings in batch management for+
    +the existing production control profiles:+
Is it possible in this node .
Please advise.
Regards.
Lawrei

Removal of batch management indicator from material master

I had removed all batch stock from material code but when trying to remove batch management indicator from material master system is giving the message "batches already exist"
Please suggest the solution.

Hi,
   The material is NEW and Batch Managed. No stocks, orders, batches are existing.
   If the Batch Management indicator is removed in Material Master, is there any way *to see/track the batch/lot * of the product.
Scenarios: Material is NOT Batch Managed
1.     How to track a batch received for Purchase order.
2.     How to track a Batch created in a Production order.
3.     How to track a Batch in Sales Order.
Thanks,
VB

How to indicate batch managed item in material master

Dear Frndz,
where should I have to enable batch management for an item in item master.
Regards,
Srini

Dear Srini,
You can maintain batch management in Sales:General /Plant (FG),Purchasing view & work scheduling view of Material Master.
Regards,
Raja.
Edited by: Raja on May 12, 2009 7:36 AM

Turn on batch managed for materials

Hi Expert!
Is there anyway to turn on batch managed for material after it has been used for some times?
Please advise.
Thanks.

Hi,
You can use the Batch Management functionality, even after having some stock for a material without Batch classification. After activating Batch Management, when you enter goods movements for materials, then onwards you must enter the batch number in addition to the material number.
Before you can manage batches of a material in stock, you must first specify in the material master record that the material is to be managed in batches for the specified plant. To do this, you must set the batch management requirement indicator in the material master record (for example, in the Purchasing or Storage view).
Regards,
Narayana.

How to activate split valuation for existing material having stock open PO,

Hello,
How to activate split valuation for existing material in plant having stock and open PR,PO and Production order.
Regards

Hi
It is not possible to activate in such case, u should not have any stock.
With regards
Pavan

Update Batch Classification for a Material

Hello friends,
I'm facing the following problem : A specific BTCI wich simulates MB01 was calling another program called SAPLCTMS to update Batch classification for a Material, this program (SAPLCTMS ) seems to be not necessary after the support package Level 57 (we just installed SAP4.6C). I didn't find any note on OSS for this...
Now i'm trying to use this BAPI instead of BTCI for the Material batch classification :
CALL FUNCTION 'BAPI_OBJCL_CHANGE'
         EXPORTING
              objectkey          = l_objnum
              objecttable        = 'MCH1'
              classnum           = 'ZGB_TIDCLASS'
              classtype          = '022'
              status             = '1'
              keydate            = sy-datum
         TABLES
              allocvaluesnumnew = t_valuesnum
              allocvaluescharnew = t_valueschar
              allocvaluescurrnew = t_valuescurr
              return             = t_return.
But its not working, it keeps asking for a batch number. I guess i'm not using the right FM ?
Any ideas about this ?
Thank you in advance for your help !
Best Regards.
Edited by: Soufiane FAYSSAL on Jun 18, 2009 11:42 AM

Hello,
I am Ashok Chelikani. I am working on the same Issue.
i am getting following message:
TYPE ID    NUMBER MESSAGE
E       |C1   |003          |Characteristic DIMENSIONSCOLOR not found or not valid
I        |CL   |736          |Assignment was not created
my procedure as follows:
CLEAR: lv_objnum.
lv_objnum = I_MSEG-MATNR.
**Get Object Details
CALL FUNCTION 'BAPI_OBJCL_GETDETAIL'
EXPORTING
objectkey = lv_objnum
objecttable = 'MARA'
classnum = 'Z_RMBCH1'
classtype = '001'
TABLES
allocvaluesnum = lt_alloc_num
allocvalueschar = lt_alloc_char
allocvaluescurr = lt_alloc_curr
return = lt_return.
IF NOT lt_return IS INITIAL.
CLEAR: lv_objnum.
lv_objnum(18) = I_MSEG-MATNR.
lv_objnum+18(10) = I_MSEG-CHARG.
CALL FUNCTION 'BAPI_OBJCL_CHANGE'
EXPORTING
objectkey = lV_objnum
objecttable = 'MCH1'
classnum = 'Z_RMBCH1'
classtype = '023'
tables
allocvaluesnumnew = lt_alloc_num
allocvaluescharnew = lt_alloc_char
allocvaluescurrnew = lt_alloc_curr
return = lt_return.
lt_return returing error message. Kindly help me.

My MacBook Pro keeps making copies of a document that I am trying to save. I don't want to duplicate the file. I only want to save it on both my hard drive and my external hard drive. I do not want to change its name for every save, which the computer see

My MacBook Pro keeps making copies of a document that I am trying to save. I don't want to duplicate the file. I only want to save it on both my hard drive and my external hard drive. I do not want to change its name for every save, which the computer seems insistent on doing. Help!!

11lizzyp wrote:
can't be saved because the file is read-only.
I did not create the file to be read-only. I created to be able to continue to add to it as I work on it.
More on versions here:
http://support.apple.com/kb/ht4753
local snapshots:
http://support.apple.com/kb/HT4878
Sounds like a permissions problem ie read only.
If running repair permissions from your DiskUtility.app does not sort it,
Someone should jump in here with erudite and concise fix.

My iPhone says Searching in the top right hand side and has been like this for 2 days. Already had a replacement sim yesterday, still not working. Apple advised me to restore my phone by connecting to iTunes. When trying to do this it's not allowing

My iPhone says Searching in the top right hand side and has been like this for 2 days. Already had a replacement sim yesterday, still not working. Apple advised me to restore my phone by connecting to iTunes. When trying to do this it's not allow

Are you on a Windows PC? Do you have anti-virus software running on it? Here are some help articles for you to troubleshoot with:
Resolve iOS update and restore errors
Resolve iOS update and restore errors in iTunes

Wants to activate batch management for a material which already had a Stock

Similar Messages

Maybe you are looking for