Wants to add an Hard Drive

Hi there !
I actually have an MSI K7N2 Delta ILSR, with 2 hard drives and 2 cd/DVD burners.
I'd like to add a third hard drive, but not sure If I still have IDE port free, or if I can use the serial ATA connection ?
P.S. : My actual 4 drives are IDE.
If choosing serial ATA, should I take serial ATA2 hard drive ?
Many Thanks !!!

"...I'd like to add a third hard drive, but not sure If I still have IDE port free..." 2 IDE ports supports up to 4 IDE devices, so, you reached max. supported.
"...or if I can use the serial ATA connection ..." Yes you can. Remember to look your P.Su. AMPS. to 3 volt rails, because adding more and more devices imply more and more power needs...

Similar Messages

I want to add another hard drive to my exsisting RAID 0 setup - how can i do this?

Hi all, wonder if somebopdy can help me
I have my computer setup as follows:
1 x SSD - used for my O/S - windows 7 ultimate 64bit
2 x 1 TB hard drives - WD black series in a RAID 0 arrar
Now Im slowly but surely running out of space on the RAID ( the two hard drives) so im thinking about purchasing 2 x more of these exact same hard-drives to add to the RAID but iv never done this before and obviously I cannot lose any of my data currently
saved on this RAID - as iv deleted everything I don't use or want
what is the best way to back all my data up and how would I add 2 x new hard drives to my RAID 0 so that it will include 4 x 1 tb hard drives in total
thank you hope somebody can help

Hi,
You have to know that with a RAID 0 (striped set), if any drive in the array fails for any reason, you will loose all data on the volume. In this case, the more drives you add, the greater the chance for failure--with increased I/O.
Being you already have a RAID 0 setup with two drives, you cannot just break the stripe--you will loose all data if not backed up.
To effectively add another drive to your RAID 0 implementation, you will have backup your machine--making an image is the best option--break the array, add the drive and then restore your image.
About how to extend the raid 0, you may need some third-party tool to complete. Here is some references for you:
http://www.partition-tool.com/resource/extend-raid-software.htm
http://www.partitionwizard.com/resizepartition/extend-raid-0-partition-windows.html
Please Note: The third-party product discussed here is manufactured by a company that is independent of Microsoft. We make no warranty, implied or otherwise, regarding this product's performance
or reliability.
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Want to add internal hard drive to my Mac Pro

I want to add an internal hard drive to my Mac Pro bought in 2011
Running Lion 10.7.5 Processor is 2.8 GHz Quad Core Intel Xeon
Have a 1TB SATA
Do I need a 2.5" or 3.5" ? Any other criteria i should know about when looking?
Advice is appreciated.

For a Mac Pro you'll probably want to go with a 3.5" drive. I would recommend Hitachi. I put a 2.5" new model Hitachi in my laptop along with an SSD and the Hitachi HD is unbelievably fast for a "spinner." If that's how there 2.5" models are there 3.5" models will only be better.
Make sure none of the drives you use have a variable rotational speed. Some of the Western Digital Green drives have that and they go to sleep a lot. When they sleep they have to wake up and when they wake up it causes a delay. It won't happen if the drives in constant use but it can be annoying. I believe the Green drives are intended primarily for backup use where speed isn't critical but energy savings and longevity are.
These are my opinions and observations.

I want to add 2nd hard drive to HP Pavilion dv7-7047cl laptop

Where can i purchase a mounting kit and cable ( hard drive to mother board) to mount and hook up the 2nd hard drive?
Thanks for your time,
Cheers,
Rob

Rob422 wrote:
Where can i purchase a mounting kit and cable ( hard drive to mother board) to mount and hook up the 2nd hard drive?
Thanks for your time,
Cheers,
Rob
Hi,
This one should be fine: http://www.ebay.co.uk/itm/NEW-REPLACEMENT-HP-DV7T-Secondary-Hard-Drive-Caddy-Cable-DV7-7000-DV7T-700...
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Want to add external hard drive

Should all ex. hard drives be recognized immediately? What if it is not? All usb ports work fine for everything else.

Hi:
They should.
I am assuming you have one that is just USB powered, or if you have one that is both USB and requires additional A/C power, that you know they are powered up correctly?
If you know your USB ports are working, most likely you have a defective external HDD.
If you connect it and the device is found, but needs drivers, then that is a different story. Most new external HDD's do not require anything but to plug it in to the USB port, and connect additional A/C power if required.
Paul

New MacBook pro how do I add external hard drive which has my entire iTunes library on it. Do I just drag external drive icon into iTunes preference box that shows where new itunes library is now located ie. On the MacBook pro.

how do I add external hard drive which contains my entire iTunes library to new MacBook Pro. i want to keep iTunes library on external hard drive. But I want all my iTunes information: artist, songs, albums, playlists on my new MacBook Pro. I know about going to iTunes preferences- advanced-itunes media folder location. At this point I don't know what to do Do I drag external icon into iTunes media folder location box. I want to keep music files on external hard drive. I don't want to use macbook pro memory for my very large music files.

I will request that your query be relocated to the iPhoto forum where knowledgeable iPhoto users will be able to assist you.
Ciao.

Want to replace my hard drive from 160g to 500g what do i need to know

want to replace my hard drive on a compaq presario sr055cl. it has a 160 g hard drive how big can i go
This question was solved.
View Solution.

Here is the Service Manual showing how to replace a hard drive:
Manual
It does have 2 SATA connectors. Here is a picture of the motherboard.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00069442&tmp_task=prodinfoCategory&cc=us&dlc=en...
This is primitive SATA. It is a SATA connection to an IDE bus. However, the fact that you have a 160 gig drive already installed tells me the motherboard will accept Large Block Addressing 48 bit (LBA48) which means you are not really constrained by size. I am sure a 500 gig drive will work and will bet a 1 TB would also work. I will also bet you would have problems with a high density drive of 2 TB or higher. The existing drive is a IDE, which means it is connected to the motherboard with a flat ribbon cable. You will have a hard time finding an IDE drive on the market these days. It will have to be SATA. Just attach a SATA data cable between the hard drive and the motherboard. You will likely need to get a molex (white 4-pin) to SATA power adapter, too, but those often come with the hard drive or are available for a couple bucks at the store where hard drives are sold.
You should be able to clone the old drive to the new using cloning software. I like and recommend Acronis True Image Home. If I were doing this I would connect the new SATA drive to the motherboard port with the side cover off and also bring power to the SATA drive. I would leave the original drive in and boot from the cloning software disk doing a proportional resize so all partitions are expanded the same percentage. After the clone is complete remove the original drive and bolt the SATA drive in its place. I would just tell you to add a second hard drive but the computer only has space for one unless you want to remove the card reader.
You may need to enable the SATA ports in the BIOS if they are not currently in use. The motherboard picture page linked above tells how to enter the BIOS. Post back if you need more help.
If this is "the Answer" please click "Accept as Solution" to help others find it.

How can I add the hard drive icon to the menu bar on a MBPr

How can I add the hard drive icon to the menu bar on a MBPr? I have downloaded Google Earth and it wants me to drag it to the hard drive for install. I was able to display the icon but now I would like to put it on the menu bar. Is this possible? Or can I add it to the hardware section under system preferences?
I'm a new Apple user, coming out of the dark ages of a lifetime in the PC Windows world.
Thanks

It's on your Desktop, is it not? You cannot put it on the menubar through OS X although you may find third-party utilities that will. If you want it on the Desktop:
Select Preferences from the Finder's Finder menu and check the desired boxes:
Click on the Sidebar icon in the toolbar to set what you want displayed in the Sidebar.

I want to wipe the hard drive on my apple G4 powerbook clean. I do not have the original discs that came with the laptop. I do have the OS x 10.4 disc that I purchased. When I reinstall 10.4 will that disc also have itunes iphoto and safari on it.

I have an apple powerbook g4 running 10.3.9 which my daughter gave me. However all the installation discs were lost. I just purchaed OS x Panther for it. I want to wipe the hard drive clean to get rid of all of her personal information as I want to donate the laptop to a needy family. Do I need the installation discs or will the panther os x disc have everything that I need to wipe the hard drive clean and install panther. I do have an external hard drive.

Hello again,
Some of those applications you mention will not be on the recently purchased OS 10.3 Panther disk so you'll need to make a copy of them so you can restore them later.
Copy to your external drive;
iPhoto, iMovie, iTunes* and you may also have World Book 2003 depending what bonus software was installed when new. There may be other Non Apple applications you want to keep also.
*You could probably still get a download of iTunes but because it is such an old version, to save searching for it, make a copy of it while it is in front of you.
Everything else will be the 10.3 Panther disk including Safari.
Ideally with original disks, the process would be:
Insert your Install disk 1 into the drive and then Restart, and hold down the C key to take you to the installation windows.
Select your language, the start up Disk and choose Erase and Install.
At the point your registration process starts, abandon the registration, quit and eject the disk and switch of the computer.
This will allow the new user a freshly installed system, whereby they can complete the registration process themselves.
However...
But as you want to add back iPhoto and iMovie etc, you'll proceed to create an Admin account, in order to add back those applications, by copying them from the external drive back to the Applications folder. After doing that you are finished.
Instruct the new user can create their own Admin account, (more than one can exist) and thereafter deleting the first one you created.
This would achieve a fresh setup akin to the original.

I want to move a hard drive from one MacBook to a newer MacBook

I want to understand the full process I need to go through. Both MacBooks are running 10.6.8. The older MacBook A has a larger hard drive (new last year). I want to keep the newer MacBook B and put the newer hard drive in it. I also want to replicate the data from the older MacBook A onto the newer one...the data is already on the hard drive, but I assume I'll have to restore it after I move the drive into the newer computer. I will use Time Machine to move the data.
Here are the specs:
MacBook A:
MacBook running 10.6.8 with 2 GHz Intel Core Duo
contains the hard drive I want to move
MacBook B:
MacBook running 10.6.8 with 2.4 GHz Intel Core 2 Duo
I want to move the hard drive and data here
1. Will this work? What would happen if I just moved the hard drive and turned on MacBook B? I'm assuming that's not a good option, but am I wrong?
2. I have the original install DVD for 10.5.4 and a newer install DVD for 10.6.3. Do I need to use the original disk and then update. or can I start with 10.6.3?
3. Is it safe to assume that if I back up MacBook A using Time Machine I will be able to restore it onto MacBook B once I move the hard drive and re-install the operating system?
4. Should I wipe the hard drive before I move it?
5. I plan to put MacBook B's hard drive into MacBook A, reinstall the op sys, and sell it. Will it be compatible? It comes from a faster machine.
I can get info on the physical aspects of moving the drives on YouTube, so I'm really more interested in how to make sure I get the operating system and data parts right.
Thanks for any and all help. Step by step instructions would be awesome!
Jeannie

1. What would happen if I just moved the hard drive and turned on MacBook B? I'm assuming that's not a good option, but am I wrong?
I can see no reason why this would not work. I would try it.
What you do next depends on the results of this test.
2. You do not need to go back to 10.5, except when you are selling A.
3. Yes. If you reinstall the OS on B, during set up you can transfer data from a TM back up.
4. Since you plan to reinstall the OS after the drive is in place, I would not erase before the transfer. That will give you a chance to test the transplant before you reinstall. You can of course wipe the drive just before you start the install.
5. No problem. Drives don't care about a machine's processor speed.

My macbook 13 inch late 2007 model got soaked in wine I bought a pro to replace it , I want to use my hard drive on it as an external , I already purchased the case , now the motherboard I understand gets bad but not the hard drive , right?

my macbook 13 inch late 2007 model got soaked in wine I bought a pro to replace it , I want to use my hard drive froom the old one on the macbook pro and use it as an external , I already purchased the case , now the motherboard I understand gets bad but not the hard drive , right? but everything else still is in there right. ?
I got my case from owc computing
thye used a cloner last time I got the hard drive from them , but the apple had to be working. and now it's just not going to turn on wine is sticky forget about
no worries I enjoyed it for 6 years could have gone longer I have all this extra gig ram memory, and a new digital drive for ith had broke
all I want it my hard drive available at owc and make it a usb drive and acc3sss my stutt ? thansk any ideas and also on how I could sell or use the parts I can salvage, and yay my new pro ix 17 inches silver sleek full ms office i life and i work. included 389 awesome price , no need for new this does awesome . rather than buying an optical drive for 200.00 I got a new computer to me and better for a lot less.
I am gratefful , just please help on the hard drive question as external ,
thanks
just didnt want to make this sound like a sob sitiuation and also inspire others what can be done.
and I then will be able to upgrade to Snow Leopard and i life 2011.

Well as I suspected I love OWC company I pulled out the mac hard drive , they offered me a Macdrive free trial program to check your drive on PC Windows and yesSSSSSSSSSSSSSSSSSSSSSSSS it all there nothing lost
woohooooo , thank you but nothing is dead, when you have faith , this was a prayer answered big time I wanted a pro so much and I get to use my 500 plust 250 plus 120 GB drives all of them
ladies and gentlemen and I get to keep the 2 GB in from my macbook 13 inch and sell all the parts
yipeee
thanks for the support, now the case is Solved. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

HT201250 how do i add external hard drive to my time machine back up

how do i add external hard drive to my time machine back up so that I may view the files independently on apple tv please?

To elaborate on above. I am looking to add about 300gig of photos on an external hard drive to TC.
Once I do this I believe I can then have itunes source its photos from TC without having them stored directly on my iMac?
Then I am assuming once I keep itunes on with home sharing I can stream these photos through Apple TV?
My inital problem is getting the photos onto TC in an individual folder not just a backup folder....is that possible or what would you suggest please?

I have a macbook pro 15 inch mid 2012 and I want to change the hard drive, what specifications do I need to search for?

I have a macbook pro 15 inch mid 2012 and I want to change the hard drive, what specifications do I need to search for?

Does a Seagate - 1TB Internal Serial ATA III/Serial ATA II Solid State Hybrid Drive for Laptops - Multi with the following specifications may work??
Height
4 inches
Width
2.75 inches
Weight
3.5 ounces
Color Category
Multi
Minimum System Requirements
PC: Windows XP, Vista, 7 or 8; MacBook®, MacBook Pro or Mac Mini: Intel®
processor; OS X; Linux; internal Serial ATA III or Serial ATA II support

I want to upgrade my Hard Drive to 1TB and more. What is the maximun Hard Drive I can install for a MacBook Pro 2009 Yesterday, I tried a SEAGATE SSHD but my screen was always a showing a QUESTION MARK (?). It's not the cable because when I put back

I want to upgrade my Hard Drive to 1TB and more.
What is the maximun Hard Drive I can install for a MacBook Pro 2009
Yesterday, I tried a SEAGATE SSHD but my screen was always a showing a QUESTION MARK (?). It's not the cable because when I put back the old original version, everything works...Any sugestion of brabnding or procédure to upgrade my hard drive?

The largest 2.5" dia SATA drives available are 2 TB in capacity.
Have you tried the Seagate SSHD connected externally to the MBP via USB? The drive itself may be faulty.
Ciao.
Here is a good place to start looking for a replacement drive:
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/

I have a 15" MacBook Pro 2.4 GHz Intel Core 2 Duo (Early 2008) running OSX Lion 10.7.5. I want to erase the Hard Drive, install Mountain Lion, and manually restore select applications and files. Is there a known procedure to do this? Any tips or feedback?

I have a 15" MacBook Pro 2.4 GHz Intel Core 2 Duo (Early 2008) running OSX Lion 10.7.5.
I want to erase the Hard Drive, install Mountain Lion, and manually restore select applications and files.
Is there a known procedure to do this? Any tips or feedback?

1. Make a backup, open App Store and purchase Mountain Lion. When its download finishes, close the installer and open Lion Diskmaker to create a bootable USB drive with Mountain Lion.
2. Press Option key while your Mac is starting, select the external drive and open Disk Utility.
3. Select Macintosh HD in the sidebar and erase the drive.
4. Close the window and install Mountain Lion

Wants to add an Hard Drive

Similar Messages

Maybe you are looking for