Wants to know the practical steps in Variant Configuration process.
Dear Experts,
I want to know the practical steps being performed under the variant configuration process being followed under textile industry or a pharmaceutical industry. Can anybody please help me out of this issue?
Dear Santosh,
I think you are aware Variant config. is used to configure the material according to the requirement of the customer at the time of processing the sale order.But to my knowledge of pharma business the material will be produced in advance and there will be lot of planning associated to increase the business,and there will be different combinations and strengths available at the disposal,there will not be any make to order scenario.Since it is an ongoing process.It will be like the number of end users of that particular product in the market(here end users will be the patients to whom the medicine has been prescribed).I hope this will be of some help to you.If am wrong pls correct me.
Regards,
Ramesh.
Similar Messages
-
I want to know the practical use of 0.0.0.0 IP
Pls forward how to use this IP in practical application.
Address 0.0.0.0 with a mask of 0.0.0.0 is the Default Route (aka :"Gateway of Last Resort")
It's a fairly popular convention in that Microsoft uses it, *nix uses it, Cisco uses it, and pretty much every other piece of networking equipment in recent history uses it.
The Default Route can be entered as a static route (ip route 0.0.0.0 0.0.0.0 {next hop address or interface ID} {Optional (but rarely used for Default route) Metric}. The Default can also be learned through a routing protocol or DHCP assignment.
FWIW
Scott
This has the ring of "a homework question" ... -
i got tis ipad 4 wifi and cellular from ireland and i wish to go on my holidays to india with it and use a micro sim from a local carrier for network courage as i dont have wifi in the place tat i am staying so i want to know the steps involed to activate the micro sim in my ipad.
What roaming charges? If you have a local plan there are no roaming charges. This is a major reason for using a local plan.
Contact, or visit the website, whatever local provider you are considering and get their plan details. -
Now I don't want to by commercial stepping motor driver, I want to do it by myself. I want to know the simplest driver circuit to drive and control my stepping motor (+5V 4 phases).
From the 7344's perspective, in open loop stepper mode, the only necessary outputs are the pulse train for steps and a TTL flag for direction. You can also set it for CW/CCW mode, which will output two separate pulse trains: one for clockwise motion, one for counter-clockwise motion.
If you only need to decode the signals into four phases and not amplify them above 5V, then a small IC might work for you (as long as you don't need a lot of current). A reconfigurable FPGA could be programmed to decode the incoming signal and output the four phases pretty easily. However, I honestly believe your best bet is just to buy a recommended amplifier for the motors.
Good Luck
Kyle V
Applications Engineer
National Instruments -
Question
When I oppen the internet, I want this to be made by Mozilla Firefox, not by Internet Explorer how it made now. I want to know the steps for this setting. I have installed windows X. Thank you very much in advance!PHi,
This is [[How to make Firefox the default browser]] -
I want to know the price of led of iphone 4
i want to know the price of led of iphone 4
Sorry, there is no replacement service for a screen of an iPhone 4. Apple will replace the whole unit if you are willing to pay the service fee for the Out-Of-Warranty-Service:
Screen repair service pricing
Repair and replacement costs depend on your iPhone model and your AppleCare product coverage. Apple will run a diagnostic test to determine whether your iPhone has experienced additional damage. If it has, or if it needs other repairs, you may need to pay an out-of-warranty service fee. Accidental damage isn't covered under the Apple One Year Limited Warranty.
Model
Screen repair cost
iPhone 6
$109
iPhone 6 Plus, iPhone 5s, iPhone 5c, iPhone 5
$129
Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing. Pricing and terms vary for service through an Apple Authorized Service Provider.
Out-of-warranty repair service
If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
Read Apple’s Repair Terms and Conditions
Model
Out-of-warranty service fee
Battery service*
iPhone 6 Plus
$329
$79
*available only if battery
fails Apple’s diagnostic test
iPhone 6
$299
iPhone 5s, iPhone 5c, iPhone 5
$269
iPhone 4s
$199
iPhone 4, iPhone 3GS, iPhone 3G,
Original iPhone
$149
Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
copied from Service Answer Center - iPhone -
I want to know the questions and protection for my account because my account is locked I can not buy please help
The page that you posted from tells you how to reset them i.e. if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 half-way down that page should let you reset them.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use -
I am a teacher of mathematics and i have a windows pc, but i want to do the next step. I want to buy an iMac. I want to learn how to write mathematical equations and how to do geometrical schema in my documents with iMac. Help me please!!! Thank you very much!!!
Bonjour VAGRAI
1) To write math expressions in a text :
— Microsoft Office 2011 etc. for Mac use its included Equation Editor.
— OpenOffice.org (OOo) and NeoOffice : download free Dmath 3.3.
— iWork (Pages, Numbers, Keynote), download free MathType 6.7, fully functional for 30 days, then becomes « Lite » for life as good as the Microsoft equation editor ; it’s better than using Grapher’s equation editor (Applications > Utilities) because MathType can be called from Pages and allows editing equations by clicking the math expressions your text (details on MathType website) .
— Graph.app 2.3 in Mountain Lion is built to draw curves and surfaces from equations, so it uses an equation editor less powerful than mathType, but it’s easier typing expressions. You may get 2D 3D geometrical drawings from clever equations. Suggest a glance at http://y.barois.free.fr/grapher/ to know all about Grapher (83 pages Instructions for Use - Grapher) and some examples
2) Geometrical schema :
— GeoGebra is very popular and used by math teachers.
— Google SketchUp 8 was not built for mathematics but for architecture, but it’s very easy using it to draw 2D 3D surfaces and solid figures.
— ShapeOnYou.app allows simples geometrical figures http://pierre.chachatelier.fr/programmation/shapeonyou_en.php
3) Some useful websites for screen shots of geometrical schema :
http://www.mathcurve.com/
http://perso.orange.fr/roger.assouly/
Drawings files PDF, TIFF, JPG … can be inserted in an iWork window (Pages).
I hate LaTex : not necessary to write math books !
Au revoir VAGRAI,
YB24
Attachment : lines and curves were made with Google SketchUp 8, screen copied (Command-Shift-4), inserted on a Pages sheet to add letters figures rectangles title.
SketchUp allows drawing precisely an arc of circle 325 mm radius 22,5° angle for instance. -
U rgent:"i want to know the work of this "conversion routine".
Hi all,
In the domain of any field in the database table there is one option called "conversion routine" just below to "output list".
i want to know the work of this "conversion routine".
can any one please tell me the practical use of this with real time example.
good points will be rewarded for helpful answer.
thanks in advance
Message was edited by:
tapu abapHi,
REPORT ZTEST.
TYPES: UPC_YS_API_CHASEL_T TYPE STANDARD TABLE OF UPC_YS_API_CHASEL.
TYPES: UPC_YS_API_CHAPRO_T TYPE STANDARD TABLE OF UPC_YS_API_CHAPRO.
TYPES: UPC_YS_API_KYFPRO_T TYPE STANDARD TABLE OF UPC_YS_API_KYFPRO.
CLASS CL_ABAP_CONV_ROUTINE DEFINITION DEFERRED.
TYPES: BEGIN OF CONVEXIT_LOOKUP_S,
CONVEXIT TYPE LVC_S_FCAT-CONVEXIT,
O_CONVEXIT TYPE REF TO CL_ABAP_CONV_ROUTINE,
END OF CONVEXIT_LOOKUP_S.
TYPES: CONVEXIT_LOOKUP_T TYPE HASHED TABLE OF CONVEXIT_LOOKUP_S
WITH UNIQUE KEY CONVEXIT.
TYPES: FIELDCATALOG_UNIQUE TYPE HASHED TABLE OF LVC_S_FCAT
WITH UNIQUE KEY FIELDNAME.
TYPES: BEGIN OF PLAN_AREA_STRUCT_CACHE,
PLANNING_AREA TYPE UPC_AREA-AREA,
FIELDCATALOG TYPE LVC_T_FCAT,
CHARACTERISTICS TYPE ZUPC_YS_API_CHAPRO_T,
KEYFIGURES TYPE ZUPC_YS_API_KYFPRO_T,
TRANSACTION_DATA_TABLE TYPE REF TO DATA,
END OF PLAN_AREA_STRUCT_CACHE.
TYPES: PLAN_AREA_STRUCT_CACHE_T TYPE SORTED TABLE OF
PLAN_AREA_STRUCT_CACHE WITH UNIQUE KEY PLANNING_AREA.
* CLASS CX_DATE_CONVERSION DEFINITION
CLASS CX_DATE_CONVERSION DEFINITION INHERITING FROM CX_DYNAMIC_CHECK.
PUBLIC SECTION.
DATA: MESSAGE TYPE STRING.
METHODS CONSTRUCTOR
IMPORTING MESSAGE TYPE STRING.
ENDCLASS. "CX_DATE_CONVERSION DEFINITION
* CLASS CX_DATE_CONVERSION IMPLEMENTATION
CLASS CX_DATE_CONVERSION IMPLEMENTATION.
METHOD CONSTRUCTOR.
SUPER->CONSTRUCTOR( ).
ME->MESSAGE = MESSAGE.
ENDMETHOD. "CONSTRUCTOR
ENDCLASS. "CX_DATE_CONVERSION IMPLEMENTATION
* CLASS CL_ABAP_CONV_ROUTINE DEFINITION
CLASS CL_ABAP_CONV_ROUTINE DEFINITION.
PUBLIC SECTION.
METHODS APPLY_CONV_INPUT
IMPORTING
INPUT TYPE ANY
EXPORTING
OUTPUT TYPE ANY .
METHODS APPLY_CONV_OUTPUT
IMPORTING
INPUT TYPE ANY
EXPORTING
OUTPUT TYPE ANY .
METHODS GET_CONVEXIT
RETURNING
VALUE(CONVEXIT) TYPE CONVEXIT .
METHODS SET_CONVEXIT
IMPORTING
VALUE(CONVEXIT) TYPE CONVEXIT .
METHODS CONSTRUCTOR
IMPORTING
CONVEXIT TYPE CONVEXIT OPTIONAL .
PRIVATE SECTION.
DATA CONVEXIT TYPE CONVEXIT .
METHODS GET_INPUT_CONVERSION_EXIT
RETURNING
VALUE(FUNCTION_MODULE_NAME) TYPE STRING .
METHODS GET_OUTPUT_CONVERSION_EXIT
RETURNING
VALUE(FUNCTION_MODULE_NAME) TYPE STRING .
ENDCLASS. "CL_ABAP_CONV_ROUTINE DEFINITION
* CLASS CL_ABAP_CONV_ROUTINE IMPLEMENTATION
CLASS CL_ABAP_CONV_ROUTINE IMPLEMENTATION.
METHOD APPLY_CONV_INPUT .
DATA: FUNCT_MOD TYPE STRING.
IF NOT ME->CONVEXIT IS INITIAL.
* Only apply conversion routine if it exits
CALL METHOD ME->GET_INPUT_CONVERSION_EXIT
RECEIVING
FUNCTION_MODULE_NAME = FUNCT_MOD.
CALL FUNCTION FUNCT_MOD
EXPORTING
INPUT = INPUT
IMPORTING
OUTPUT = OUTPUT.
ELSE.
* Can only hope this works
OUTPUT = INPUT.
ENDIF.
ENDMETHOD. "APPLY_CONV_INPUT
METHOD APPLY_CONV_OUTPUT.
DATA: FUNCT_MOD TYPE STRING.
IF NOT ME->CONVEXIT IS INITIAL.
* Only apply conversion routine if it exits
CALL METHOD ME->GET_OUTPUT_CONVERSION_EXIT
RECEIVING
FUNCTION_MODULE_NAME = FUNCT_MOD.
CALL FUNCTION FUNCT_MOD
EXPORTING
INPUT = INPUT
IMPORTING
OUTPUT = OUTPUT.
ELSE.
* Can only hope this works
OUTPUT = INPUT.
ENDIF.
ENDMETHOD. "APPLY_CONV_OUTPUT
METHOD CONSTRUCTOR.
IF CONVEXIT IS SUPPLIED.
CALL METHOD ME->SET_CONVEXIT
EXPORTING
CONVEXIT = CONVEXIT.
ENDIF.
ENDMETHOD. "CONSTRUCTOR
METHOD GET_CONVEXIT.
CONVEXIT = ME->CONVEXIT.
ENDMETHOD. "GET_CONVEXIT
METHOD SET_CONVEXIT.
ME->CONVEXIT = CONVEXIT.
ENDMETHOD. "SET_CONVEXIT
METHOD GET_INPUT_CONVERSION_EXIT.
* Generate standard conversion routines for input conversion
* This is based on standard SAP ABAP help documentation
CONCATENATE 'CONVERSION_EXIT_' ME->CONVEXIT
'_INPUT' INTO FUNCTION_MODULE_NAME.
ENDMETHOD. "GET_INPUT_CONVERSION_EXIT
METHOD GET_OUTPUT_CONVERSION_EXIT.
* Generate standard conversion routines for output conversion
* This is based on standard SAP ABAP help documentation
CONCATENATE 'CONVERSION_EXIT_' ME->CONVEXIT
'_OUTPUT' INTO FUNCTION_MODULE_NAME.
ENDMETHOD. "GET_OUTPUT_CONVERSION_EXIT
ENDCLASS. "CL_ABAP_CONV_ROUTINE IMPLEMENTATION
* CLASS CL_ABAP_CONV_DECIMAL DEFINITION
CLASS CL_ABAP_CONV_DECIMAL DEFINITION.
PUBLIC SECTION.
CLASS-DATA SAP_DECIMAL_FMT_SPACE TYPE USR01-DCPFM VALUE ' '
READ-ONLY .
CLASS-DATA SAP_DECIMAL_FMT_X TYPE USR01-DCPFM VALUE 'X' READ-ONLY .
CLASS-DATA SAP_DECIMAL_FMT_Y TYPE USR01-DCPFM VALUE 'Y' READ-ONLY .
CLASS-DATA USER_DECIMAL_FORMAT TYPE USR01-DCPFM READ-ONLY .
CLASS-METHODS CLASS_CONSTRUCTOR .
CLASS-METHODS CONVERT_DECIMAL_EXT2INT
IMPORTING
EXTERNAL_VALUE TYPE STRING
CHANGING
INTERNAL_VALUE TYPE P
RAISING
CX_SY_CONVERSION_OVERFLOW
CX_SY_CONVERSION_NO_NUMBER .
CLASS-METHODS CONVERT_DECIMAL_INT2EXT
IMPORTING
INTERNAL_VALUE TYPE P
CHANGING
EXTERNAL_VALUE TYPE STRING .
ENDCLASS. "CL_ABAP_CONV_DECIMAL DEFINITION
* CLASS CL_ABAP_CONV_DECIMAL IMPLEMENTATION
CLASS CL_ABAP_CONV_DECIMAL IMPLEMENTATION.
METHOD CLASS_CONSTRUCTOR .
SELECT SINGLE DCPFM FROM USR01 INTO USER_DECIMAL_FORMAT
WHERE BNAME = SY-UNAME.
ENDMETHOD. "CLASS_CONSTRUCTOR
METHOD CONVERT_DECIMAL_EXT2INT .
* THE GOAL IS TO GET THIS INTO INTERNAL FORMAT WHICH IS EQUIVALENT TO
* EX. NNNNN.NN
DATA: NUM_STR TYPE STRING.
NUM_STR = EXTERNAL_VALUE.
CONDENSE NUM_STR NO-GAPS.
CASE USER_DECIMAL_FORMAT.
WHEN SAP_DECIMAL_FMT_X.
REPLACE ALL OCCURRENCES OF ',' IN NUM_STR WITH SPACE.
CONDENSE NUM_STR NO-GAPS.
WHEN SAP_DECIMAL_FMT_SPACE.
REPLACE ALL OCCURRENCES OF '.' IN NUM_STR WITH SPACE.
CONDENSE NUM_STR NO-GAPS.
REPLACE ALL OCCURRENCES OF ',' IN NUM_STR WITH '.'.
WHEN SAP_DECIMAL_FMT_Y.
REPLACE ALL OCCURRENCES OF ',' IN NUM_STR WITH '.'.
ENDCASE.
INTERNAL_VALUE = NUM_STR.
ENDMETHOD. "CONVERT_DECIMAL_EXT2INT
METHOD CONVERT_DECIMAL_INT2EXT .
* THE GOAL IS TO GET THIS INTO EXTERNAL FORMAT WHICH IS BASED ON SAP
* USER PROFILE SETTINGS
* CURRENT INPUT FORMAT EQUIVALENT IS EX. NNNNN.NN
DATA: TEMP(70) TYPE C.
WRITE INTERNAL_VALUE TO TEMP.
EXTERNAL_VALUE = TEMP.
ENDMETHOD. "CONVERT_DECIMAL_INT2EXT
ENDCLASS. "CL_ABAP_CONV_DECIMAL IMPLEMENTATION
* CLASS CL_ABAP_CONV_DATE DEFINITION
CLASS CL_ABAP_CONV_DATE DEFINITION.
PUBLIC SECTION.
CLASS-DATA SAP_DATE_FMT_5 TYPE USR01-DATFM VALUE '5' READ-ONLY .
CLASS-DATA SAP_DATE_FMT_6 TYPE USR01-DATFM VALUE '6' READ-ONLY .
CLASS-DATA SAP_DATE_FMT_3 TYPE USR01-DATFM VALUE '3' READ-ONLY .
CLASS-DATA SAP_DATE_FMT_4 TYPE USR01-DATFM VALUE '4' READ-ONLY .
CLASS-DATA SAP_DATE_FMT_1 TYPE USR01-DATFM VALUE '1' READ-ONLY .
CLASS-DATA SAP_DATE_FMT_2 TYPE USR01-DATFM VALUE '2' READ-ONLY .
CLASS-DATA USER_DATE_FORMAT TYPE USR01-DATFM READ-ONLY .
CLASS-METHODS CONVERT_DATE_EXT2INT
IMPORTING
EXTERNAL_DATE TYPE STRING
RETURNING
VALUE(INTERNAL_DATE) TYPE D
RAISING
CX_DATE_CONVERSION .
CLASS-METHODS CONVERT_DATE_INT2EXT
IMPORTING
INTERNAL_DATE TYPE D
RETURNING
VALUE(EXTERNAL_DATE) TYPE STRING .
CLASS-METHODS CLASS_CONSTRUCTOR .
ENDCLASS. "CL_ABAP_CONV_DATE DEFINITION
* CLASS CL_ABAP_CONV_DATE IMPLEMENTATION
CLASS CL_ABAP_CONV_DATE IMPLEMENTATION.
METHOD CLASS_CONSTRUCTOR.
SELECT SINGLE DATFM FROM USR01 INTO USER_DATE_FORMAT
WHERE BNAME = SY-UNAME.
ENDMETHOD. "CLASS_CONSTRUCTOR
METHOD CONVERT_DATE_EXT2INT.
* HERE ARE THE CURRENT DATE FORMATS FROM SAP GUI
*1 DD.MM.YYYY
*2 MM/DD/YYYY
*3 MM-DD-YYYY
*4 YYYY.MM.DD
*5 YYYY/MM/DD
*6 YYYY-MM-DD
DATA: PERMITTED_NUMBERS TYPE STRING VALUE '0123456789'.
DATA: TEMP_DATE TYPE D.
DATA: MESSAGE_VALID_NUMERICS TYPE STRING
VALUE 'Only Numerics (0-9) are acceptable.'.
DATA: MESSAGE_VALID_FORMAT TYPE STRING
VALUE 'Invalid date format.'.
IF STRLEN( EXTERNAL_DATE ) = 10.
CASE USER_DATE_FORMAT.
WHEN SAP_DATE_FMT_1.
IF EXTERNAL_DATE+2(1) = '.' AND EXTERNAL_DATE+5(1) = '.'.
TEMP_DATE+0(4) = EXTERNAL_DATE+6(4). " YEAR
TEMP_DATE+4(2) = EXTERNAL_DATE+3(2). " MONTH
TEMP_DATE+6(2) = EXTERNAL_DATE+0(2). " DAY
IF NOT ( TEMP_DATE CO PERMITTED_NUMBERS ).
RAISE EXCEPTION TYPE CX_DATE_CONVERSION
EXPORTING MESSAGE = MESSAGE_VALID_NUMERICS." ISSUE ERROR
ENDIF.
ELSE.
RAISE EXCEPTION TYPE CX_DATE_CONVERSION
EXPORTING MESSAGE = MESSAGE_VALID_FORMAT. " ISSUE ERROR
ENDIF.
WHEN SAP_DATE_FMT_2.
IF EXTERNAL_DATE+2(1) = '/' AND EXTERNAL_DATE+5(1) = '/'.
TEMP_DATE+0(4) = EXTERNAL_DATE+6(4). " YEAR
TEMP_DATE+4(2) = EXTERNAL_DATE+0(2). " MONTH
TEMP_DATE+6(2) = EXTERNAL_DATE+3(2). " DAY
IF NOT ( TEMP_DATE CO PERMITTED_NUMBERS ).
RAISE EXCEPTION TYPE CX_DATE_CONVERSION
EXPORTING MESSAGE = MESSAGE_VALID_NUMERICS. " ISSUE
ENDIF.
ELSE.
RAISE EXCEPTION TYPE CX_DATE_CONVERSION
EXPORTING MESSAGE = MESSAGE_VALID_FORMAT. " ISSUE ERROR
ENDIF.
WHEN SAP_DATE_FMT_3.
IF EXTERNAL_DATE+2(1) = '-' AND EXTERNAL_DATE+5(1) = '-'.
TEMP_DATE+0(4) = EXTERNAL_DATE+6(4). " YEAR
TEMP_DATE+4(2) = EXTERNAL_DATE+0(2). " MONTH
TEMP_DATE+6(2) = EXTERNAL_DATE+3(2). " DAY
IF NOT ( TEMP_DATE CO PERMITTED_NUMBERS ).
RAISE EXCEPTION TYPE CX_DATE_CONVERSION
EXPORTING MESSAGE = MESSAGE_VALID_NUMERICS." ISSUE ERROR
ENDIF.
ELSE.
RAISE EXCEPTION TYPE CX_DATE_CONVERSION
EXPORTING MESSAGE = MESSAGE_VALID_FORMAT. " ISSUE ERROR
ENDIF.
WHEN SAP_DATE_FMT_4.
IF EXTERNAL_DATE+4(1) = '.' AND EXTERNAL_DATE+7(1) = '.'.
TEMP_DATE+0(4) = EXTERNAL_DATE+0(4). " YEAR
TEMP_DATE+4(2) = EXTERNAL_DATE+5(2). " MONTH
TEMP_DATE+6(2) = EXTERNAL_DATE+8(2). " DAY
IF NOT ( TEMP_DATE CO PERMITTED_NUMBERS ).
RAISE EXCEPTION TYPE CX_DATE_CONVERSION
EXPORTING MESSAGE = MESSAGE_VALID_NUMERICS." ISSUE ERROR
ENDIF.
ELSE.
RAISE EXCEPTION TYPE CX_DATE_CONVERSION
EXPORTING MESSAGE = MESSAGE_VALID_FORMAT. " ISSUE ERROR
ENDIF.
WHEN SAP_DATE_FMT_5.
IF EXTERNAL_DATE+4(1) = '/' AND EXTERNAL_DATE+7(1) = '/'.
TEMP_DATE+0(4) = EXTERNAL_DATE+0(4). " YEAR
TEMP_DATE+4(2) = EXTERNAL_DATE+5(2). " MONTH
TEMP_DATE+6(2) = EXTERNAL_DATE+8(2). " DAY
IF NOT ( TEMP_DATE CO PERMITTED_NUMBERS ).
RAISE EXCEPTION TYPE CX_DATE_CONVERSION
EXPORTING MESSAGE = MESSAGE_VALID_NUMERICS." ISSUE ERROR
ENDIF.
ELSE.
RAISE EXCEPTION TYPE CX_DATE_CONVERSION
EXPORTING MESSAGE = MESSAGE_VALID_FORMAT. " ISSUE ERROR
ENDIF.
WHEN SAP_DATE_FMT_6.
IF EXTERNAL_DATE+4(1) = '-' AND EXTERNAL_DATE+7(1) = '-'.
TEMP_DATE+0(4) = EXTERNAL_DATE+0(4). " YEAR
TEMP_DATE+4(2) = EXTERNAL_DATE+5(2). " MONTH
TEMP_DATE+6(2) = EXTERNAL_DATE+8(2). " DAY
IF NOT ( TEMP_DATE CO PERMITTED_NUMBERS ).
RAISE EXCEPTION TYPE CX_DATE_CONVERSION
EXPORTING MESSAGE = MESSAGE_VALID_NUMERICS." ISSUE ERROR
ENDIF.
ELSE.
RAISE EXCEPTION TYPE CX_DATE_CONVERSION
EXPORTING MESSAGE = MESSAGE_VALID_FORMAT. " ISSUE ERROR
ENDIF.
ENDCASE.
INTERNAL_DATE = TEMP_DATE.
ELSEIF STRLEN( EXTERNAL_DATE ) = 8.
* ASSUME NORMAL DATE FORMAT (YYYYMMDD)
INTERNAL_DATE = EXTERNAL_DATE.
ELSE.
RAISE EXCEPTION TYPE CX_DATE_CONVERSION
EXPORTING MESSAGE = MESSAGE_VALID_FORMAT. " ISSUE ERROR
ENDIF.
ENDMETHOD. "CONVERT_DATE_EXT2INT
METHOD CONVERT_DATE_INT2EXT.
* HERE ARE THE CURRENT DATE FORMATS FROM SAP GUI
*1 DD.MM.YYYY
*2 MM/DD/YYYY
*3 MM-DD-YYYY
*4 YYYY.MM.DD
*5 YYYY/MM/DD
*6 YYYY-MM-DD
DATA: EXTERNAL_DATE_TEMP(10) TYPE C.
WRITE INTERNAL_DATE TO EXTERNAL_DATE_TEMP.
EXTERNAL_DATE = EXTERNAL_DATE_TEMP.
ENDMETHOD. "CONVERT_DATE_INT2EXT
ENDCLASS. "CL_ABAP_CONV_DATE IMPLEMENTATION
* CLASS CX_SEM_BPS_DATA_ACCESS DEFINITION
CLASS CX_SEM_BPS_DATA_ACCESS DEFINITION INHERITING FROM CX_DYNAMIC_CHECK
PUBLIC SECTION.
DATA: MESSAGE TYPE STRING.
DATA: RETURN_T TYPE BAPIRET2_T.
METHODS CONSTRUCTOR
IMPORTING
MESSAGE TYPE STRING
RETURN_T TYPE BAPIRET2_T OPTIONAL.
ENDCLASS. "CX_SEM_BPS_DATA_ACCESS DEFINITION
* CLASS CX_SEM_BPS_DATA_ACCESS IMPLEMENTATION
CLASS CX_SEM_BPS_DATA_ACCESS IMPLEMENTATION.
METHOD CONSTRUCTOR.
SUPER->CONSTRUCTOR( ).
ME->MESSAGE = MESSAGE.
ME->RETURN_T = RETURN_T.
ENDMETHOD. "CONSTRUCTOR
ENDCLASS. "CX_SEM_BPS_DATA_ACCESS IMPLEMENTATION
* CLASS CL_SEMBPS_DATA_ACCESSOR DEFINITION
CLASS CL_SEMBPS_DATA_ACCESSOR DEFINITION.
PUBLIC SECTION.
DATA TRANSACTION_DATA TYPE REF TO DATA .
CLASS-DATA C_LEVEL TYPE UPC_PLEVEL-PLEVEL VALUE 'ZLABAP' READ-ONLY .
CLASS-DATA C_LAYOUT TYPE UPP_PARAM-PARAM VALUE 'ZMABAP' READ-ONLY .
CLASS-DATA C_ADHOC_PACK TYPE UPC_PACKAGE-PPACKAGE VALUE '0-ADHOC'
READ-ONLY .
CLASS-DATA C_MULTIPLAN_AREA TYPE UPC_YS_API_CHAPRO-CHANM VALUE
'_AREA_____' READ-ONLY .
METHODS GET_INFOCUBE
RETURNING
VALUE(INFOCUBE) TYPE UPC_BW_AREA-INFOCUBE .
METHODS GET_CHARACTERISTIC_SELECTIONS
EXPORTING
CHARACTERISTIC_SELECTION TYPE UPC_YS_API_CHASEL_T .
METHODS REFRESH
RAISING
CX_SEM_BPS_DATA_ACCESS .
METHODS CONSTRUCTOR
IMPORTING
PLANNING_AREA TYPE UPC_AREA-AREA
IT_FIELDCATALOG TYPE LVC_T_FCAT
TRANSACTION_DATA_TABLE TYPE REF TO DATA
CHARACTERISTIC_SELECTION TYPE UPC_YS_API_CHASEL_T
RAISING
CX_SEM_BPS_DATA_ACCESS .
METHODS GET_PLANNING_AREA
RETURNING
VALUE(PLANNING_AREA) TYPE UPC_AREA-AREA .
METHODS GET_CHARACTERISTICS
EXPORTING
CHARACTERISTICS TYPE UPC_YS_API_CHAPRO_T .
METHODS GET_KEYFIGURES
EXPORTING
KEYFIGURES TYPE UPC_YS_API_KYFPRO_T .
METHODS SAVE
RAISING
CX_SEM_BPS_DATA_ACCESS .
PRIVATE SECTION.
DATA CONVEXIT_LOOKUP TYPE CONVEXIT_LOOKUP_T .
DATA INFOCUBE TYPE UPC_BW_AREA-INFOCUBE .
DATA IT_FIELDCATALOG TYPE FIELDCATALOG_UNIQUE .
DATA PLANNING_AREA TYPE UPC_AREA-AREA .
DATA CHARACTERISTICS TYPE UPC_YS_API_CHAPRO_T .
DATA KEYFIGURES TYPE UPC_YS_API_KYFPRO_T .
DATA CHARACTERISTIC_SELECTION TYPE UPC_YS_API_CHASEL_T .
DATA LAYOUT_COL_SPEC TYPE STANDARD TABLE OF UPC_YS_API_COL .
CLASS-METHODS FORCE_ERROR_MESSAGE
IMPORTING
MESSAGE TYPE STRING OPTIONAL
RETURN_STRUCT TYPE BAPIRET2 OPTIONAL
RETURN_STRUCTS TYPE BAPIRET2_T OPTIONAL
RAISING
CX_SEM_BPS_DATA_ACCESS .
CLASS-METHODS CHECK_MESSAGE
IMPORTING
E_SUBRC TYPE SY-SUBRC
RETURN_STRUCT TYPE BAPIRET2
RAISING
CX_SEM_BPS_DATA_ACCESS .
METHODS SET_CHARACTERISTIC_SELECTION
IMPORTING
CHARACTERISTIC_SELECTION TYPE UPC_YS_API_CHASEL_T .
METHODS SET_PLANNING_AREA
IMPORTING
PLANNING_AREA TYPE UPC_AREA-AREA
RAISING
CX_SEM_BPS_DATA_ACCESS .
METHODS VALIDATE_PLANNING_OBJECTS
RAISING
CX_SEM_BPS_DATA_ACCESS .
CLASS-METHODS CHECK_MESSAGES
IMPORTING
RETURN_STRUCTS TYPE BAPIRET2_T
E_SUBRC TYPE SY-SUBRC
RAISING
CX_SEM_BPS_DATA_ACCESS .
METHODS READ_DATA
RAISING
CX_SEM_BPS_DATA_ACCESS .
ENDCLASS. "CL_SEMBPS_DATA_ACCESSOR DEFINITION
* CLASS CL_SEMBPS_DATA_ACCESSOR IMPLEMENTATION
CLASS CL_SEMBPS_DATA_ACCESSOR IMPLEMENTATION.
METHOD CONSTRUCTOR .
DATA: WA_FIELDCATALOG TYPE LVC_S_FCAT.
DATA: CONVEXIT_WA TYPE CONVEXIT_LOOKUP_S.
* BUILD CONVERSION EXITS AND FIELDCATALOG
LOOP AT IT_FIELDCATALOG INTO WA_FIELDCATALOG.
INSERT WA_FIELDCATALOG INTO TABLE ME->IT_FIELDCATALOG[].
IF NOT WA_FIELDCATALOG-CONVEXIT IS INITIAL.
CLEAR CONVEXIT_WA.
CONVEXIT_WA-CONVEXIT = WA_FIELDCATALOG-CONVEXIT.
CREATE OBJECT CONVEXIT_WA-O_CONVEXIT
EXPORTING
CONVEXIT = WA_FIELDCATALOG-CONVEXIT.
INSERT CONVEXIT_WA INTO TABLE ME->CONVEXIT_LOOKUP.
ENDIF.
ENDLOOP.
CALL METHOD ME->SET_PLANNING_AREA
EXPORTING
PLANNING_AREA = PLANNING_AREA.
CALL METHOD ME->SET_CHARACTERISTIC_SELECTION
EXPORTING
CHARACTERISTIC_SELECTION = CHARACTERISTIC_SELECTION.
* POINT TO TABLE CONTAINING TRANSACTION DATA
ME->TRANSACTION_DATA = TRANSACTION_DATA_TABLE.
* READ DATA
CALL METHOD ME->REFRESH.
ENDMETHOD. "CONSTRUCTOR
METHOD GET_CHARACTERISTICS .
CHARACTERISTICS[] = ME->CHARACTERISTICS[].
ENDMETHOD. "GET_CHARACTERISTICS
METHOD GET_CHARACTERISTIC_SELECTIONS.
CHARACTERISTIC_SELECTION[] = ME->CHARACTERISTIC_SELECTION[].
ENDMETHOD. "GET_CHARACTERISTIC_SELECTIONS
METHOD GET_INFOCUBE .
INFOCUBE = ME->INFOCUBE.
ENDMETHOD. "GET_INFOCUBE
METHOD GET_KEYFIGURES .
KEYFIGURES[] = ME->KEYFIGURES[].
ENDMETHOD. "GET_KEYFIGURES
METHOD GET_PLANNING_AREA .
PLANNING_AREA = ME->PLANNING_AREA.
ENDMETHOD. "GET_PLANNING_AREA
METHOD REFRESH.
CALL METHOD ME->READ_DATA.
ENDMETHOD. "REFRESH
METHOD SAVE .
DATA: E_SUBRC TYPE SY-SUBRC.
DATA: ES_RETURN TYPE BAPIRET2.
DATA: CHARACTERISTICS_WA TYPE UPC_YS_API_CHAPRO.
DATA: WA_REF TYPE REF TO DATA.
DATA: ITK_ROW TYPE TABLE OF UPC_YS_API_ROW.
DATA: ITK_ROW_WA TYPE UPC_YS_API_ROW.
DATA: LAYOUT_COL_SPEC_WA TYPE UPC_YS_API_COL.
DATA: ITK_DATA TYPE TABLE OF UPC_YS_API_DATA.
DATA: ITK_DATA_WA TYPE UPC_YS_API_DATA.
DATA: ETK_RETURN TYPE TABLE OF BAPIRET2.
DATA: WA_FIELDCATALOG TYPE LVC_S_FCAT.
DATA: CONVERSION_EXIT TYPE STRING.
DATA: KEYFIG TYPE STRING.
DATA: DATE_CHAR TYPE STRING.
DATA: MESSAGE TYPE STRING.
CONSTANTS: FIND_FIELD_ERR TYPE STRING VALUE 'Unable to find field'.
FIELD-SYMBOLS: <TD_FIELD> TYPE ANY.
FIELD-SYMBOLS: <TD_WA> TYPE ANY.
FIELD-SYMBOLS: <TD_TAB> TYPE STANDARD TABLE.
ASSIGN ME->TRANSACTION_DATA->* TO <TD_TAB>.
CREATE DATA WA_REF LIKE LINE OF <TD_TAB>.
ASSIGN WA_REF->* TO <TD_WA>.
CLEAR <TD_WA>.
DATA: ROWC TYPE I.
ROWC = 1.
LOOP AT <TD_TAB> INTO <TD_WA>.
* FILL CHARACTERISTIC DATA
LOOP AT ME->CHARACTERISTICS INTO CHARACTERISTICS_WA.
ASSIGN COMPONENT CHARACTERISTICS_WA-CHANM OF STRUCTURE <TD_WA>
TO <TD_FIELD>.
IF SY-SUBRC = 0.
ITK_ROW_WA-ROW = ROWC.
ITK_ROW_WA-CHANM = CHARACTERISTICS_WA-CHANM.
CLEAR ITK_ROW_WA-CHAVLEXT.
* APPLY OUTPUT CONVERSION EXIT FOR SAP EXTERNAL TYPE
* ONLY APPLIES WHEN VALUE IS NOT UNASSIGNED ('#') MEANING INITIAL(ABAP)
* FOR EXTERNAL CONVERSION UNASSIGED ('#') IS JUST A BLANK
IF NOT <TD_FIELD> IS INITIAL.
READ TABLE ME->IT_FIELDCATALOG INTO WA_FIELDCATALOG
WITH TABLE KEY FIELDNAME = ITK_ROW_WA-CHANM.
IF SY-SUBRC = 0 AND NOT WA_FIELDCATALOG-CONVEXIT IS INITIAL.
DATA: CONVEXIT_WA TYPE CONVEXIT_LOOKUP_S.
READ TABLE ME->CONVEXIT_LOOKUP INTO CONVEXIT_WA
WITH TABLE KEY CONVEXIT = WA_FIELDCATALOG-CONVEXIT.
CALL METHOD CONVEXIT_WA-O_CONVEXIT->APPLY_CONV_OUTPUT
EXPORTING
INPUT = <TD_FIELD>
IMPORTING
OUTPUT = <TD_FIELD>.
ITK_ROW_WA-CHAVLEXT = <TD_FIELD>.
ELSEIF SY-SUBRC = 0 AND WA_FIELDCATALOG-INTTYPE = 'D'.
* APPLY DATE CONVERSION TO EXTERNAL FORMAT BASED ON USER PROFILE
CALL METHOD CL_ABAP_CONV_DATE=>CONVERT_DATE_INT2EXT
EXPORTING
INTERNAL_DATE = <TD_FIELD>
RECEIVING
EXTERNAL_DATE = DATE_CHAR.
ITK_ROW_WA-CHAVLEXT = DATE_CHAR.
ELSE.
ITK_ROW_WA-CHAVLEXT = <TD_FIELD>.
ENDIF.
ENDIF.
APPEND ITK_ROW_WA TO ITK_ROW.
ELSE.
* FAILURE TO FIND THE FIELD IN THE POINTER WILL RESULT IN
* TRANSACTION DATA INTEGRITY ISSUES, WE SHOULD ERROR OUT
CONCATENATE FIND_FIELD_ERR CHARACTERISTICS_WA-CHANM
INTO MESSAGE.
CALL METHOD CL_SEMBPS_DATA_ACCESSOR=>FORCE_ERROR_MESSAGE
EXPORTING
MESSAGE = MESSAGE.
ENDIF.
ENDLOOP.
* FILL KEY FIGURE DATA
LOOP AT ME->LAYOUT_COL_SPEC INTO LAYOUT_COL_SPEC_WA.
ASSIGN COMPONENT LAYOUT_COL_SPEC_WA-CHAVLEXT
OF STRUCTURE <TD_WA> TO <TD_FIELD>.
IF SY-SUBRC = 0.
ITK_DATA_WA-ROW = ROWC.
ITK_DATA_WA-COL = LAYOUT_COL_SPEC_WA-COL.
READ TABLE ME->IT_FIELDCATALOG INTO WA_FIELDCATALOG
WITH TABLE KEY FIELDNAME = LAYOUT_COL_SPEC_WA-CHAVLEXT.
IF WA_FIELDCATALOG-INTTYPE = 'P'.
* MUST CONVERT TO EXTERNAL FORMAT FOR DECIMALS
CALL METHOD CL_ABAP_CONV_DECIMAL=>CONVERT_DECIMAL_INT2EXT
EXPORTING
INTERNAL_VALUE = <TD_FIELD>
CHANGING
EXTERNAL_VALUE = KEYFIG.
ELSEIF WA_FIELDCATALOG-INTTYPE = 'F'
OR WA_FIELDCATALOG-INTTYPE = 'I'.
KEYFIG = <TD_FIELD>.
ENDIF.
ITK_DATA_WA-VALUE = KEYFIG.
APPEND ITK_DATA_WA TO ITK_DATA.
ELSE.
* FAILURE TO FIND THE FIELD IN THE POINTER WILL RESULT IN
* TRANSACTION DATA INTEGRITY ISSUES, WE SHOULD ERROR OUT
CONCATENATE FIND_FIELD_ERR LAYOUT_COL_SPEC_WA-CHAVLEXT
INTO MESSAGE.
CALL METHOD CL_SEMBPS_DATA_ACCESSOR=>FORCE_ERROR_MESSAGE
EXPORTING
MESSAGE = MESSAGE.
ENDIF.
ENDLOOP.
ROWC = ROWC + 1.
ENDLOOP.
* SET ADHOC PACKAGE SELECTIONS
CALL FUNCTION 'API_SEMBPS_ADHOCPACKAGE_SET'
EXPORTING
I_AREA = ME->PLANNING_AREA
I_PLEVEL = CL_SEMBPS_DATA_ACCESSOR=>C_LEVEL
IMPORTING
E_SUBRC = E_SUBRC
ES_RETURN = ES_RETURN
TABLES
ITK_CHASEL = CHARACTERISTIC_SELECTION.
* THROW EXCEPTIONS IF NECESSARY
CALL METHOD CL_SEMBPS_DATA_ACCESSOR=>CHECK_MESSAGE
EXPORTING
E_SUBRC = E_SUBRC
RETURN_STRUCT = ES_RETURN.
CALL FUNCTION 'API_SEMBPS_SETDATA'
EXPORTING
I_AREA = ME->PLANNING_AREA
I_PLEVEL = CL_SEMBPS_DATA_ACCESSOR=>C_LEVEL
I_PACKAGE = CL_SEMBPS_DATA_ACCESSOR=>C_ADHOC_PACK
I_LAYOUT = CL_SEMBPS_DATA_ACCESSOR=>C_LAYOUT
IMPORTING
E_SUBRC = E_SUBRC
TABLES
ITK_ROW = ITK_ROW
ITK_DATA = ITK_DATA
ETK_RETURN = ETK_RETURN.
* THROW EXCEPTIONS IF NECESSARY
CALL METHOD CL_SEMBPS_DATA_ACCESSOR=>CHECK_MESSAGES
EXPORTING
E_SUBRC = E_SUBRC
RETURN_STRUCTS = ETK_RETURN.
* SAVE THE DATA INTO THE CUBE
CALL FUNCTION 'API_SEMBPS_POST'
IMPORTING
E_SUBRC = E_SUBRC
ES_RETURN = ES_RETURN.
CALL METHOD CL_SEMBPS_DATA_ACCESSOR=>CHECK_MESSAGE
EXPORTING
E_SUBRC = E_SUBRC
RETURN_STRUCT = ES_RETURN.
* CLEAR SEM BPS DATA BUFFER AS WEIRD BEHAVIOR MAY OCCUR IF
* NOT CLEARED WHETHER IF SUCCESSFUL OR NOT
CALL FUNCTION 'API_SEMBPS_REFRESH'
IMPORTING
E_SUBRC = E_SUBRC
ES_RETURN = ES_RETURN.
CALL METHOD CL_SEMBPS_DATA_ACCESSOR=>CHECK_MESSAGE
EXPORTING
E_SUBRC = E_SUBRC
RETURN_STRUCT = ES_RETURN.
ENDMETHOD. "SAVE
METHOD CHECK_MESSAGE .
DATA: RETURN_T TYPE BAPIRET2_T.
APPEND RETURN_STRUCT TO RETURN_T.
CALL METHOD CL_SEMBPS_DATA_ACCESSOR=>CHECK_MESSAGES
EXPORTING
RETURN_STRUCTS = RETURN_T
E_SUBRC = E_SUBRC.
ENDMETHOD. "CHECK_MESSAGE
METHOD CHECK_MESSAGES .
IF E_SUBRC <> 0.
DATA: MESSAGE TYPE STRING.
DATA: RETURN TYPE BAPIRET2.
READ TABLE RETURN_STRUCTS INTO RETURN WITH KEY TYPE = 'E'.
IF SY-SUBRC <> 0.
READ TABLE RETURN_STRUCTS INTO RETURN WITH KEY TYPE = 'A'.
ENDIF.
MESSAGE = RETURN-MESSAGE.
RAISE EXCEPTION TYPE CX_SEM_BPS_DATA_ACCESS
EXPORTING
MESSAGE = MESSAGE
RETURN_T = RETURN_STRUCTS.
ENDIF.
ENDMETHOD. "CHECK_MESSAGES
METHOD FORCE_ERROR_MESSAGE.
DATA: RC TYPE SY-SUBRC VALUE 4.
IF MESSAGE IS SUPPLIED.
DATA: RETURN TYPE BAPIRET2.
RETURN-TYPE = 'E'.
RETURN-MESSAGE = MESSAGE.
CALL METHOD CL_SEMBPS_DATA_ACCESSOR=>CHECK_MESSAGE
EXPORTING
RETURN_STRUCT = RETURN
E_SUBRC = RC.
ENDIF.
IF RETURN_STRUCT IS SUPPLIED.
CALL METHOD CL_SEMBPS_DATA_ACCESSOR=>CHECK_MESSAGE
EXPORTING
RETURN_STRUCT = RETURN_STRUCT
E_SUBRC = RC.
ENDIF.
IF RETURN_STRUCTS IS SUPPLIED.
CALL METHOD CL_SEMBPS_DATA_ACCESSOR=>CHECK_MESSAGES
EXPORTING
RETURN_STRUCTS = RETURN_STRUCTS
E_SUBRC = RC.
ENDIF.
ENDMETHOD. "FORCE_ERROR_MESSAGE
METHOD READ_DATA .
DATA: CHAR_DATA TYPE TABLE OF UPC_YS_API_ROW.
DATA: KEYFIG_DATA TYPE TABLE OF UPC_YS_API_DATA.
DATA: ETK_ROW_WA TYPE UPC_YS_API_ROW.
DATA: ETK_COL TYPE TABLE OF UPC_YS_API_COL.
DATA: ETK_RETURN TYPE TABLE OF BAPIRET2.
DATA: KEYFIGURES_WA TYPE UPC_YS_API_KYFPRO.
DATA: E_SUBRC TYPE SY-SUBRC.
DATA: ES_RETURN TYPE BAPIRET2.
DATA: ETK_COL_WA TYPE UPC_YS_API_COL.
DATA: WA_REF TYPE REF TO DATA.
DATA: HAS_DATA TYPE BOOLEAN.
DATA: KEYFIG_DATA_WA TYPE UPC_YS_API_DATA.
DATA: LINE1 TYPE I.
DATA: LINE2 TYPE I.
DATA: MESSAGE TYPE STRING.
CONSTANTS: FIND_FIELD_ERR TYPE STRING VALUE 'Unable to find field '.
FIELD-SYMBOLS: <TD_FIELD> TYPE ANY.
FIELD-SYMBOLS: <TD_WA> TYPE ANY.
FIELD-SYMBOLS: <TD_TAB> TYPE STANDARD TABLE.
CALL FUNCTION 'API_SEMBPS_ADHOCPACKAGE_SET'
EXPORTING
I_AREA = ME->PLANNING_AREA
I_PLEVEL = CL_SEMBPS_DATA_ACCESSOR=>C_LEVEL
IMPORTING
E_SUBRC = E_SUBRC
ES_RETURN = ES_RETURN
TABLES
ITK_CHASEL = ME->CHARACTERISTIC_SELECTION.
CALL METHOD CL_SEMBPS_DATA_ACCESSOR=>CHECK_MESSAGE
EXPORTING
E_SUBRC = E_SUBRC
RETURN_STRUCT = ES_RETURN.
CALL FUNCTION 'API_SEMBPS_GETDATA'
EXPORTING
I_AREA = ME->PLANNING_AREA
I_PLEVEL = CL_SEMBPS_DATA_ACCESSOR=>C_LEVEL
I_PACKAGE = CL_SEMBPS_DATA_ACCESSOR=>C_ADHOC_PACK
I_LAYOUT = CL_SEMBPS_DATA_ACCESSOR=>C_LAYOUT
I_READ_ONLY = 'X'
IMPORTING
E_SUBRC = E_SUBRC
TABLES
ETK_ROW = CHAR_DATA
ETK_COL = ETK_COL
ETK_DATA = KEYFIG_DATA
ETK_RETURN = ETK_RETURN.
CALL METHOD CL_SEMBPS_DATA_ACCESSOR=>CHECK_MESSAGES
EXPORTING
E_SUBRC = E_SUBRC
RETURN_STRUCTS = ETK_RETURN.
* SET LAYOUT COLUMN SPECIFICATION
ME->LAYOUT_COL_SPEC[] = ETK_COL[].
* CHECK TO SEE IF THE COLUMN SPEC CONTAINS ALL KEY FIGURES REQUIRED
* THIS WOULD GUARANTEE THAT ALL THE KEY FIGURES PRESENT IN THE CUBE
* ARE ALSO IN THE LAYOUT
DESCRIBE TABLE ME->KEYFIGURES LINES LINE1.
DESCRIBE TABLE ME->LAYOUT_COL_SPEC LINES LINE2.
IF LINE1 <> LINE2.
LOOP AT ME->KEYFIGURES INTO KEYFIGURES_WA.
READ TABLE ME->LAYOUT_COL_SPEC
WITH KEY CHAVLEXT = KEYFIGURES_WA-KYFNM
TRANSPORTING NO FIELDS.
IF SY-SUBRC <> 0.
CLEAR ES_RETURN.
ES_RETURN-TYPE = 4.
CONCATENATE 'Layout ' CL_SEMBPS_DATA_ACCESSOR=>C_LAYOUT
' is missing keyfigure: ' KEYFIGURES_WA-KYFNM
INTO ES_RETURN-MESSAGE.
APPEND ES_RETURN TO ETK_RETURN.
ENDIF.
ENDLOOP.
CALL METHOD CL_SEMBPS_DATA_ACCESSOR=>FORCE_ERROR_MESSAGE
EXPORTING
RETURN_STRUCTS = ETK_RETURN.
ENDIF.
* CLEAR TRANSACTION DATA IF ANY
ASSIGN TRANSACTION_DATA->* TO <TD_TAB>.
REFRESH <TD_TAB>.
CREATE DATA WA_REF LIKE LINE OF <TD_TAB>.
ASSIGN WA_REF->* TO <TD_WA>.
DATA: PREV_ROWID TYPE UPC_YS_API_ROW-ROW VALUE 1.
DATA: WA_FIELDCATALOG TYPE LVC_S_FCAT.
DATA: CONVERSION_EXIT TYPE STRING.
DATA: DECIMAL_CONV TYPE STRING.
DATA: DATE_CONV TYPE STRING.
CLEAR <TD_WA>.
* SORT DATA
SORT KEYFIG_DATA BY ROW.
SORT ETK_COL BY COL.
SORT CHAR_DATA BY ROW.
* INSERT ALL CHARACTERISTIC ROWS
LOOP AT CHAR_DATA INTO ETK_ROW_WA.
IF ETK_ROW_WA-CHANM IS NOT INITIAL.
IF ETK_ROW_WA-ROW <> PREV_ROWID.
CLEAR HAS_DATA.
PREV_ROWID = ETK_ROW_WA-ROW.
APPEND <TD_WA> TO <TD_TAB>.
CLEAR <TD_WA>.
ENDIF.
HAS_DATA = 'X'.
ASSIGN COMPONENT ETK_ROW_WA-CHANM OF STRUCTURE
<TD_WA> TO <TD_FIELD>.
IF SY-SUBRC = 0.
CLEAR <TD_FIELD>.
IF ETK_ROW_WA-CHAVLEXT <> '#'.
* APPLY INPUT CONVERSION EXIT FOR SAP INTERNAL DATA ELEMENTS
* ONLY APPLIES WHEN VALUE IS NOT UNASSIGNED ('#')
READ TABLE ME->IT_FIELDCATALOG INTO WA_FIELDCATALOG
WITH TABLE KEY FIELDNAME = ETK_ROW_WA-CHANM.
IF SY-SUBRC = 0 AND NOT WA_FIELDCATALOG-CONVEXIT IS INITIAL.
<TD_FIELD> = ETK_ROW_WA-CHAVLEXT.
* APPLY INPUT CONVERSION EXIT IF ANY, CHECK INFOOBJECT RSD1 TRANSACTION
DATA: CONVEXIT_WA TYPE CONVEXIT_LOOKUP_S.
READ TABLE ME->CONVEXIT_LOOKUP INTO CONVEXIT_WA
WITH TABLE KEY CONVEXIT = WA_FIELDCATALOG-CONVEXIT.
CALL METHOD CONVEXIT_WA-O_CONVEXIT->APPLY_CONV_INPUT
EXPORTING
INPUT = <TD_FIELD>
IMPORTING
OUTPUT = <TD_FIELD>.
ELSEIF SY-SUBRC = 0 AND WA_FIELDCATALOG-INTTYPE = 'D'.
* APPLY DATE CONVERSION AS THERE IS NO COVERSION EXIT FOR DATES DUE TO
* SAPGUI DISPLAY FORMATS BASED ON USER PROFILES
TRY.
DATE_CONV = ETK_ROW_WA-CHAVLEXT.
CALL METHOD CL_ABAP_CONV_DATE=>CONVERT_DATE_EXT2INT
EXPORTING
EXTERNAL_DATE = DATE_CONV
RECEIVING
INTERNAL_DATE = <TD_FIELD>.
CATCH CX_DATE_CONVERSION .
* THERE SHOULD BE NO DATE CONVERSION ERROR.
ENDTRY.
ELSE.
<TD_FIELD> = ETK_ROW_WA-CHAVLEXT.
ENDIF.
ENDIF.
ELSE.
* FAILURE TO FIND THE FIELD IN THE POINTER WILL RESULT IN
* TRANSACTION DATA INTEGRITY ISSUES, WE SHOULD ERROR OUT
CONCATENATE FIND_FIELD_ERR ETK_ROW_WA-CHANM
INTO MESSAGE.
CALL METHOD CL_SEMBPS_DATA_ACCESSOR=>FORCE_ERROR_MESSAGE
EXPORTING
MESSAGE = MESSAGE.
ENDIF.
ENDIF.
ENDLOOP.
* APPEND THE LAST ROW
IF HAS_DATA IS NOT INITIAL.
APPEND <TD_WA> TO <TD_TAB>.
ENDIF.
* INSERT ALL KEY FIGURES
LOOP AT KEYFIG_DATA INTO KEYFIG_DATA_WA.
READ TABLE <TD_TAB> INTO <TD_WA> INDEX KEYFIG_DATA_WA-ROW.
IF SY-SUBRC <> 0.
* SUMMARY LINE WHICH INDICATES COMPLETION
EXIT.
ENDIF.
* AVAILABLE KEY FIGURES
READ TABLE ETK_COL INTO ETK_COL_WA
INDEX KEYFIG_DATA_WA-COL.
ASSIGN COMPONENT ETK_COL_WA-CHAVLEXT OF STRUCTURE
<TD_WA> TO <TD_FIELD>.
IF SY-SUBRC = 0.
READ TABLE ME->IT_FIELDCATALOG INTO WA_FIELDCATALOG
WITH TABLE KEY FIELDNAME = ETK_COL_WA-CHAVLEXT.
IF WA_FIELDCATALOG-INTTYPE = 'P'.
DECIMAL_CONV = KEYFIG_DATA_WA-VALUE.
CALL METHOD CL_ABAP_CONV_DECIMAL=>CONVERT_DECIMAL_EXT2INT
EXPORTING
EXTERNAL_VALUE = DECIMAL_CONV
CHANGING
INTERNAL_VALUE = <TD_FIELD>.
ELSEIF WA_FIELDCATALOG-INTTYPE = 'F' OR
WA_FIELDCATALOG-INTTYPE = 'I'.
<TD_FIELD> = KEYFIG_DATA_WA-VALUE.
ENDIF.
MODIFY <TD_TAB> INDEX KEYFIG_DATA_WA-ROW FROM <TD_WA>
TRANSPORTING (ETK_COL_WA-CHAVLEXT) .
ELSE.
* FAILURE TO FIND THE FIELD IN THE POINTER WILL RESULT IN
* TRANSACTION DATA INTEGRITY ISSUES, WE SHOULD ERROR OUT
CONCATENATE FIND_FIELD_ERR ETK_ROW_WA-CHANM
INTO MESSAGE.
CALL METHOD CL_SEMBPS_DATA_ACCESSOR=>FORCE_ERROR_MESSAGE
EXPORTING
MESSAGE = MESSAGE.
ENDIF.
ENDLOOP.
ENDMETHOD. "READ_DATA
METHOD SET_CHARACTERISTIC_SELECTION.
DATA: CHARACTERISTIC_SELECTION_WA TYPE UPC_YS_API_CHASEL.
DATA: WA_FIELDCATALOG TYPE LVC_S_FCAT.
DATA: CONV_EXIT TYPE STRING.
DATA: DATE_CONV TYPE STRING.
DATA: TEMP_DATE TYPE D.
* basically convert the selection criteria to external values and hold
* copy of that
REFRESH ME->CHARACTERISTIC_SELECTION.
LOOP AT CHARACTERISTIC_SELECTION INTO CHARACTERISTIC_SELECTION_WA.
READ TABLE ME->IT_FIELDCATALOG INTO WA_FIELDCATALOG
WITH TABLE KEY FIELDNAME = CHARACTERISTIC_SELECTION_WA-CHANM.
IF SY-SUBRC = 0.
IF NOT WA_FIELDCATALOG-CONVEXIT IS INITIAL.
DATA: CONVEXIT_WA TYPE CONVEXIT_LOOKUP_S.
READ TABLE ME->CONVEXIT_LOOKUP INTO CONVEXIT_WA
WITH TABLE KEY CONVEXIT = WA_FIELDCATALOG-CONVEXIT.
CALL METHOD CONVEXIT_WA-O_CONVEXIT->APPLY_CONV_OUTPUT
EXPORTING
INPUT = CHARACTERISTIC_SELECTION_WA-LOW
IMPORTING
OUTPUT = CHARACTERISTIC_SELECTION_WA-LOW.
CALL METHOD CONVEXIT_WA-O_CONVEXIT->APPLY_CONV_OUTPUT
EXPORTING
INPUT = CHARACTERISTIC_SELECTION_WA-HIGH
IMPORTING
OUTPUT = CHARACTERISTIC_SELECTION_WA-HIGH.
ELSEIF WA_FIELDCATALOG-INTTYPE = 'D'.
* DATE TYPE CONVERSION BASED ON SAP GUI
IF NOT CHARACTERISTIC_SELECTION_WA-LOW IS INITIAL.
TEMP_DATE = CHARACTERISTIC_SELECTION_WA-LOW.
CALL METHOD CL_ABAP_CONV_DATE=>CONVERT_DATE_INT2EXT
EXPORTING
INTERNAL_DATE = TEMP_DATE
RECEIVING
EXTERNAL_DATE = DATE_CONV.
CHARACTERISTIC_SELECTION_WA-LOW = DATE_CONV.
ENDIF.
IF NOT CHARACTERISTIC_SELECTION_WA-HIGH IS INITIAL.
TEMP_DATE = CHARACTERISTIC_SELECTION_WA-HIGH.
CALL METHOD CL_ABAP_CONV_DATE=>CONVERT_DATE_INT2EXT
EXPORTING
INTERNAL_DATE = TEMP_DATE
RECEIVING
EXTERNAL_DATE = DATE_CONV.
CHARACTERISTIC_SELECTION_WA-HIGH = DATE_CONV.
ENDIF.
ENDIF.
APPEND CHARACTERISTIC_SELECTION_WA TO
ME->CHARACTERISTIC_SELECTION.
ENDIF.
ENDLOOP.
ENDMETHOD. "SET_CHARACTERISTIC_SELECTION
METHOD SET_PLANNING_AREA.
DATA: ES_RETURN TYPE BAPIRET2.
DATA: E_SUBRC TYPE SY-SUBRC.
* CHECK TO SEE OF PLANNING AREA IS A MULTI-PLANNING AREA
CALL FUNCTION 'API_SEMBPS_AREA_GETDETAIL'
EXPORTING
I_AREA = PLANNING_AREA
IMPORTING
E_SUBRC = E_SUBRC
ES_RETURN = ES_RETURN
TABLES
ETK_CHAPRO = ME->CHARACTERISTICS
ETK_KYFPRO = ME->KEYFIGURES.
CALL METHOD CL_SEMBPS_DATA_ACCESSOR=>CHECK_MESSAGE
EXPORTING
E_SUBRC = E_SUBRC
RETURN_STRUCT = ES_RETURN.
ME->PLANNING_AREA = PLANNING_AREA.
* FIND THE INFOCUBE RELATED TO THE PLANNING AREA
SELECT SINGLE INFOCUBE FROM UPC_BW_AREA INTO ME->INFOCUBE
WHERE AREA = PLANNING_AREA.
CALL METHOD ME->VALIDATE_PLANNING_OBJECTS.
ENDMETHOD. "SET_PLANNING_AREA
METHOD VALIDATE_PLANNING_OBJECTS.
DATA: E_SUBRC TYPE SY-SUBRC.
DATA: ES_RETURN TYPE BAPIRET2.
DATA: ES_RETURN_T TYPE TABLE OF BAPIRET2.
DATA: ETK_CHA TYPE TABLE OF UPC_YS_API_PLEVEL_CHA.
DATA: ETK_CHA_WA TYPE UPC_YS_API_PLEVEL_CHA.
DATA: CHARACTERISTIC_WA TYPE UPC_YS_API_CHAPRO.
DATA: KEYFIGURES_WA TYPE UPC_YS_API_KYFPRO.
DATA: ETK_CHASEL TYPE TABLE OF UPC_YS_API_CHASEL.
DATA: ETK_KYF TYPE TABLE OF UPC_YS_KYF.
DATA: ETK_RETURN TYPE TABLE OF BAPIRET2.
DATA: LINES1 TYPE I.
DATA: LINES2 TYPE I.
DATA: E_LEADCOL_COMPL TYPE UPC_YS_API_INFO-LEADCOL_COMPL.
DATA: ETK_HEAD_INFO TYPE TABLE OF UPC_YS_API_HEAD_INFO.
DATA: ETK_ROW_INFO TYPE TABLE OF UPC_YS_API_ROW_INFO.
DATA: ETK_COL_INFO TYPE TABLE OF UPC_YS_API_COL_INFO.
* CHECK TO SEE IF ITS A MULTI-PLANNING AREA
READ TABLE ME->CHARACTERISTICS TRANSPORTING NO FIELDS
WITH KEY CHANM = CL_SEMBPS_DATA_ACCESSOR=>C_MULTIPLAN_AREA.
* MULTI-PLANNING AREAS SHOULD NOT BE ACCEPTABLE TO THIS AS IT LEADS
* TO REFERENCING OF PLANNING AREAS IN ITS LEVEL/PACKAGES/LAYOUTS WHICH
* IS HARDER TO MAINTAIN
IF SY-SUBRC = 0.
REFRESH ME->CHARACTERISTICS.
REFRESH ME->KEYFIGURES.
CLEAR ES_RETURN.
ES_RETURN-TYPE = 'E'.
ES_RETURN-MESSAGE = 'DO NOT USE MULTI-PLANNING AREAS'.
APPEND ES_RETURN TO ES_RETURN_T.
CALL METHOD CL_SEMBPS_DATA_ACCESSOR=>FORCE_ERROR_MESSAGE
EXPORTING
RETURN_STRUCTS = ES_RETURN_T.
ENDIF.
* CHECK THE PLANNING LEVEL
CALL FUNCTION 'API_SEMBPS_PLEVEL_GETDETAIL'
EXPORTING
I_AREA = ME->PLANNING_AREA
I_PLEVEL = CL_SEMBPS_DATA_ACCESSOR=>C_LEVEL
IMPORTING
E_SUBRC = E_SUBRC
ES_RETURN = ES_RETURN
TABLES
ETK_CHA = ETK_CHA
ETK_CHASEL = ETK_CHASEL
ETK_KYF = ETK_KYF.
CALL METHOD CL_SEMBPS_DATA_ACCESSOR=>CHECK_MESSAGE
EXPORTING
E_SUBRC = E_SUBRC
RETURN_STRUCT = ES_RETURN.
* CHECK TO SEE IF THE SAME NUMBER OF CHARACTERISTICS EXISTS IN LEVEL
DESCRIBE TABLE ME->CHARACTERISTICS LINES LINES1.
DESCRIBE TABLE ETK_CHA LINES LINES2.
IF LINES1 <> LINES2.
* ERROR OUT THE MISSING CHARACTERISTICS FROM THE PLANNING LEVEL
LOOP AT ME->CHARACTERISTICS INTO CHARACTERISTIC_WA.
READ TABLE ETK_CHA WITH KEY CHANM = CHARACTERISTIC_WA-CHANM
TRANSPORTING NO FIELDS.
IF SY-SUBRC <> 0.
CLEAR ES_RETURN.
ES_RETURN-TYPE = 'E'.
CONCATENATE 'Missing characteristic ' CHARACTERISTIC_WA-CHANM
' from planning level ' CL_SEMBPS_DATA_ACCESSOR=>C_LEVEL
INTO ES_RETURN-MESSAGE.
APPEND ES_RETURN TO ES_RETURN_T.
ENDIF.
ENDLOOP.
ENDIF.
* CHECK TO SEE IF EVERY CHARACTERISTIC IS AVAIABLE FOR SELECTION IN
* PACKAGE
READ TABLE ETK_CHA WITH KEY PACKSEL = SPACE TRANSPORTING NO FIELDS.
IF SY-SUBRC = 0.
* ERROR OUT THE CHARACTERISTICS THAT ARE NOT AVAILABLE FOR PACKAGE
* SELECTIONS
LOOP AT ETK_CHA INTO ETK_CHA_WA WHERE PACKSEL = SPACE.
CLEAR ES_RETURN.
ES_RETURN-TYPE = 'E'.
CONCATENATE 'Characteristic ' ETK_CHA_WA-CHANM
' needs to be available for selection in planning level '
CL_SEMBPS_DATA_ACCESSOR=>C_LEVEL INTO ES_RETURN-MESSAGE.
APPEND ES_RETURN TO ES_RETURN_T.
ENDLOOP.
ENDIF.
* CHECK TO SEE IF THE SAME NUMBER OF KEYFIGURES EXISTS IN LEVEL
DESCRIBE TABLE ME->KEYFIGURES LINES LINES1.
DESCRIBE TABLE ETK_KYF LINES LINES2.
IF LINES1 <> LINES2.
* ERROR OUT THE MISSING KEYFIGURES FROM THE PLANNING LEVEL
LOOP AT ME->KEYFIGURES INTO KEYFIGURES_WA.
READ TABLE ETK_KYF WITH KEY KYFNM = KEYFIGURES_WA-KYFNM
TRANSPORTING NO FIELDS.
IF SY-SUBRC <> 0.
CLEAR ES_RETURN.
ES_RETURN-TYPE = 'E'.
CONCATENATE 'Missing keyfigure ' KEYFIGURES_WA-KYFNM
' from planning level ' CL_SEMBPS_DATA_ACCESSOR=>C_LEVEL
INTO ES_RETURN-MESSAGE.
APPEND ES_RETURN TO ES_RETURN_T.
ENDIF.
ENDLOOP.
ENDIF.
* CHECK THE PLANNING LAYOUT
CALL FUNCTION 'API_SEMBPS_LAYOUT_GETDETAIL'
EXPORTING
I_AREA = ME->PLANNING_AREA
I_PLEVEL = CL_SEMBPS_DATA_ACCESSOR=>C_LEVEL
I_LAYOUT = CL_SEMBPS_DATA_ACCESSOR=>C_LAYOUT
IMPORTING
E_SUBRC = E_SUBRC
E_LEADCOL_COMPL = E_LEADCOL_COMPL
TABLES
ETK_HEAD_INFO = ETK_HEAD_INFO
ETK_ROW_INFO = ETK_ROW_INFO
ETK_COL_INFO = ETK_COL_INFO
ETK_RETURN = ETK_RETURN.
CALL METHOD CL_SEMBPS_DATA_ACCESSOR=>CHECK_MESSAGES
EXPORTING
E_SUBRC = E_SUBRC
RETURN_STRUCTS = ETK_RETURN.
* MAKE SURE THAT HEADER AREA IS EMPTY AS ALL THE DATA READ IS IN LEAD
* COLUMNS ONLY
IF NOT ETK_HEAD_INFO[] IS INITIAL.
CLEAR ES_RETURN.
ES_RETURN-TYPE = 'E'.
CONCATENATE 'Header area must be empty in layout '
CL_SEMBPS_DATA_ACCESSOR=>C_LAYOUT
INTO ES_RETURN-MESSAGE.
APPEND ES_RETURN TO ES_RETURN_T.
ENDIF.
* MAKE SURE THAT LAYOUT TYPE IS KEY FIGURES IN DATA COLUMNS
IF NOT E_LEADCOL_COMPL IS INITIAL.
CLEAR ES_RETURN.
ES_RETURN-TYPE = 'E'.
CONCATENATE 'Layout ' CL_SEMBPS_DATA_ACCESSOR=>C_LAYOUT
' must be of type "Key Figs in data columns"'
INTO ES_RETURN-MESSAGE.
APPEND ES_RETURN TO ES_RETURN_T.
ENDIF.
* CHECK FOR THE SAME NUMBER OF CHARACTERISTICS IN LEAD COLUMNS OF LAYOUT
* AND IN PLANNING AREA
DESCRIBE TABLE ME->CHARACTERISTICS LINES LINES1.
DESCRIBE TABLE ETK_ROW_INFO LINES LINES2.
IF LINES1 <> LINES2.
* ERROR OUT THE MISSING CHARACTERISTICS FROM THE PLANNING LEVEL
LOOP AT ME->CHARACTERISTICS INTO CHARACTERISTIC_WA.
READ TABLE ETK_ROW_INFO WITH KEY CHANM = CHARACTERISTIC_WA-CHANM
TRANSPORTING NO FIELDS.
IF SY-SUBRC <> 0.
CLEAR ES_RETURN.
ES_RETURN-TYPE = 'E'.
CONCATENATE 'Missing characteristic ' CHARACTERISTIC_WA-CHANM
' from planning layout ' CL_SEMBPS_DATA_ACCESSOR=>C_LAYOUT
INTO ES_RETURN-MESSAGE.
APPEND ES_RETURN TO ES_RETURN_T.
ENDIF.
ENDLOOP.
ENDIF.
* IF MESSAGES ARE AVAILBLE FROM CUSTOM CHECKS THROW EXCEPTION
IF NOT ES_RETURN_T[] IS INITIAL.
CALL METHOD CL_SEMBPS_DATA_ACCESSOR=>FORCE_ERROR_MESSAGE
EXPORTING
RETURN_STRUCTS = ES_RETURN_T.
ENDIF.
ENDMETHOD. "VALIDATE_PLANNING_OBJECTS
ENDCLASS. "CL_SEMBPS_DATA_ACCESSOR IMPLEMENTATION
* CLASS CL_SEMBPS_DATA_ACCESS_FACTORY DEFINITION
CLASS CL_SEMBPS_DATA_ACCESS_FACTORY DEFINITION.
PUBLIC SECTION.
CLASS-METHODS CREATE_DATA_ACCESSOR
IMPORTING
PLAN_AREA TYPE UPC_AREA-AREA
CHARACTERISTIC_SELECTION TYPE UPC_YS_API_CHASEL_T
DDIC_STRUCTURE_NAME TYPE DD02L-TABNAME OPTIONAL
EXPORTING
O_DATA_ACCESSOR TYPE REF TO CL_SEMBPS_DATA_ACCESSOR
CHANGING
TRANSACTION_DATA_TABLE TYPE STANDARD TABLE OPTIONAL
RAISING
CX_SEM_BPS_DATA_ACCESS .
CLASS-METHODS GET_PLANNING_AREA_SPECS
IMPORTING
PLANNING_AREA TYPE UPC_AREA-AREA
EXPORTING
TRANSACTION_DATA_STRUCT TYPE REF TO DATA
KEYFIGURES TYPE UPC_YS_API_KYFPRO_T
FIELDCATALOG TYPE LVC_T_FCAT
CHARACTERISTICS TYPE UPC_YS_API_CHAPRO_T
RAISING
CX_SEM_BPS_DATA_ACCESS .
PRIVATE SECTION.
CLASS-DATA PLAN_AREA_CACHE TYPE PLAN_AREA_STRUCT_CACHE_T .
CLASS-METHODS CREATE_DYNAMIC_STRUCTURE
IMPORTING
PLANNING_AREA TYPE UPC_AREA-AREA
EXPORTING
TRANSACTION_DATA_STRUCT TYPE REF TO DATA
KEYFIGURES TYPE UPC_YS_API_KYFPRO_T
FIELDCATALOG TYPE LVC_T_FCAT
CHARACTERISTICS TYPE UPC_YS_API_CHAPRO_T
RAISING
CX_SEM_BPS_DATA_ACCESS .
ENDCLASS. "CL_SEMBPS_DATA_ACCESS_FACTORY DEFINITION
* CLASS CL_SEMBPS_DATA_ACCESS_FACTORY IMPLEMENTATION
CLASS CL_SEMBPS_DATA_ACCESS_FACTORY IMPLEMENTATION.
METHOD CREATE_DATA_ACCESSOR.
DATA: TRANSACTION_DATA_STRUCT TYPE REF TO DATA.
DATA: FIELDCATALOG TYPE LVC_T_FCAT.
IF TRANSACTION_DATA_TABLE IS SUPPLIED
AND DDIC_STRUCTURE_NAME IS SUPPLIED AND
NOT DDIC_STRUCTURE_NAME IS INITIAL.
* RETRIEVE FIELD CATALOG OF THE DDIC STRUCTURE TO PROVIDE
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_STRUCTURE_NAME = DDIC_STRUCTURE_NAME
CHANGING
CT_FIELDCAT = FIELDCATALOG
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
GET REFERENCE OF TRANSACTION_DATA_TABLE INTO
TRANSACTION_DATA_STRUCT.
ELSE.
* GENERATE INTERNAL TABLE AND ITS FIELD CATALOG DYNAMICALLY
CALL METHOD CL_SEMBPS_DATA_ACCESS_FACTORY=>GET_PLANNING_AREA_SPECS
EXPORTING
PLANNING_AREA = PLAN_AREA
IMPORTING
TRANSACTION_DATA_STRUCT = TRANSACTION_DATA_STRUCT
FIELDCATALOG = FIELDCATALOG.
ENDIF.
* CREATE DATA ACCESSOR
CREATE OBJECT O_DATA_ACCESSOR
EXPORTING
PLANNING_AREA = PLAN_AREA
IT_FIELDCATALOG = FIELDCATALOG
TRANSACTION_DATA_TABLE = TRANSACTION_DATA_STRUCT
CHARACTERISTIC_SELECTION = CHARACTERISTIC_SELECTION.
ENDMETHOD. "CREATE_DATA_ACCESSOR
METHOD GET_PLANNING_AREA_SPECS.
DATA: PLAN_AREA_CACHE_WA TYPE PLAN_AREA_STRUCT_CACHE.
FIELD-SYMBOLS: <TD_TAB_DEFINITION> TYPE STANDARD TABLE.
READ TABLE PLAN_AREA_CACHE
WITH TABLE KEY PLANNING_AREA = PLANNING_AREA
INTO PLAN_AREA_CACHE_WA.
* CREATE INTERNAL TABLE REFLECTING THE PLANNING AREA AND CACHE IT
* TO AVOID TOO MANY CALLS TO CREATION OF DYNAMIC INTERNAL TABLES
* SAP HAS RESTRICTED DEVELOPERS FROM CREATING
IF SY-SUBRC <> 0.
CLEAR PLAN_AREA_CACHE_WA.
CALL METHOD
CL_SEMBPS_DATA_ACCESS_FACTORY=>CREATE_DYNAMIC_STRUCTURE
EXPORTING
PLANNING_AREA = PLANNING_AREA
IMPORTING
TRANSACTION_DATA_STRUCT =
PLAN_AREA_CACHE_WA-TRANSACTION_DATA_TABLE
KEYFIGURES = PLAN_AREA_CACHE_WA-KEYFIGURES
FIELDCATALOG = PLAN_AREA_CACHE_WA-FIELDCATALOG
CHARACTERISTICS = PLAN_AREA_CACHE_WA-CHARACTERISTICS.
PLAN_AREA_CACHE_WA-PLANNING_AREA = PLANNING_AREA.
INSERT PLAN_AREA_CACHE_WA INTO TABLE PLAN_AREA_CACHE.
ENDIF.
FIELDCATALOG[] = PLAN_AREA_CACHE_WA-FIELDCATALOG.
CHARACTERISTICS[] = PLAN_AREA_CACHE_WA-CHARACTERISTICS[].
KEYFIGURES[] = PLAN_AREA_CACHE_WA-KEYFIGURES[].
ASSIGN PLAN_AREA_CACHE_WA-TRANSACTION_DATA_TABLE->*
TO <TD_TAB_DEFINITION>.
* CREATE A NEW REFERENCE
CREATE DATA TRANSACTION_DATA_STRUCT LIKE
<TD_TAB_DEFINITION>.
ENDMETHOD. "GET_PLANNING_AREA_SPECS
METHOD CREATE_DYNAMIC_STRUCTURE.
DATA: ES_RETURN TYPE BAPIRET2.
DATA: E_SUBRC TYPE SY-SUBRC.
DATA: MESSAGE TYPE STRING.
CALL FUNCTION 'API_SEMBPS_AREA_GETDETAIL'
EXPORTING
I_AREA = PLANNING_AREA
IMPORTING
E_SUBRC = E_SUBRC
ES_RETURN = ES_RETURN
TABLES
ETK_CHAPRO = CHARACTERISTICS
ETK_KYFPRO = KEYFIGURES.
IF E_SUBRC <> 0.
MESSAGE = ES_RETURN-MESSAGE.
RAISE EXCEPTION TYPE CX_SEM_BPS_DATA_ACCESS
EXPORTING MESSAGE = MESSAGE.
ENDIF.
READ TABLE CHARACTERISTICS TRANSPORTING NO FIELDS
WITH KEY CHANM = CL_SEMBPS_DATA_ACCESSOR=>C_MULTIPLAN_AREA.
IF SY-SUBRC = 0.
MESSAGE = 'DO NOT USE MULTI-PLANNING AREAS'.
RAISE EXCEPTION TYPE CX_SEM_BPS_DATA_ACCESS
EXPORTING MESSAGE = MESSAGE.
ENDIF.
DATA: CHAR_WA TYPE UPC_YS_API_CHAPRO.
DATA: KEYFIG_WA TYPE UPC_YS_API_KYFPRO.
DATA: WA_FIELDCATALOG TYPE LVC_S_FCAT.
DATA: RETURN TYPE BAPIRET2.
DATA: DETAILS TYPE BAPI6108.
* CHARACTERISTIC FIELDCATALOG
LOOP AT CHARACTERISTICS INTO CHAR_WA.
WA_FIELDCATALOG-INTTYPE = CHAR_WA-INTTP.
WA_FIELDCATALOG-FIELDNAME = CHAR_WA-CHANM.
WA_FIELDCATALOG-DATATYPE = CHAR_WA-DATATP.
WA_FIELDCATALOG-INTLEN = CHAR_WA-INTLEN.
WA_FIELDCATALOG-DECIMALS = CHAR_WA-DECIMALS.
WA_FIELDCATALOG-OUTPUTLEN = CHAR_WA-OUTPUTLEN.
CALL FUNCTION 'BAPI_IOBJ_GETDETAIL'
EXPORTING
INFOOBJECT = CHAR_WA-CHANM
IMPORTING
DETAILS = DETAILS
RETURN = RETURN.
IF RETURN-TYPE = 'E'.
MESSAGE = RETURN-MESSAGE.
RAISE EXCEPTION TYPE CX_SEM_BPS_DATA_ACCESS
EXPORTING MESSAGE = MESSAGE.
ENDIF.
WA_FIELDCATALOG-CONVEXIT = DETAILS-CONVEXIT.
APPEND WA_FIELDCATALOG TO FIELDCATALOG.
ENDLOOP.
* KEYFIGURE FIELDCATALOG
LOOP AT KEYFIGURES INTO KEYFIG_WA.
WA_FIELDCATALOG-INTTYPE = KEYFIG_WA-INTTP.
WA_FIELDCATALOG-FIELDNAME = KEYFIG_WA-KYFNM.
WA_FIELDCATALOG-DATATYPE = KEYFIG_WA-DATATP.
WA_FIELDCATALOG-INTLEN = KEYFIG_WA-DIGITS.
WA_FIELDCATALOG-DECIMALS = KEYFIG_WA-DECIMALS.
WA_FIELDCATALOG-DD_OUTLEN = KEYFIG_WA-OUTPUTLEN.
CALL FUNCTION 'BAPI_IOBJ_GETDETAIL'
EXPORTING
INFOOBJECT = KEYFIG_WA-KYFNM
IMPORTING
DETAILS = DETAILS
RETURN = RETURN.
IF RETURN-TYPE = 'E'.
MESSAGE = RETURN-MESSAGE.
RAISE EXCEPTION TYPE CX_SEM_BPS_DATA_ACCESS
EXPORTING MESSAGE = MESSAGE.
ENDIF.
WA_FIELDCATALOG-CONVEXIT = DETAILS-CONVEXIT.
APPEND WA_FIELDCATALOG TO FIELDCATALOG.
ENDLOOP.
* AVOID TOO MANY CALLS TO THIS FUNCTION MODULE
IF NOT FIELDCATALOG[] IS INITIAL.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = FIELDCATALOG
IMPORTING
EP_TABLE = TRANSACTION_DATA_STRUCT
EXCEPTIONS
GENERATE_SUBPOOL_DIR_FULL = 1
OTHERS = 2.
CASE SY-SUBRC.
WHEN 1.
RAISE EXCEPTION TYPE CX_SEM_BPS_DATA_ACCESS EXPORTING
MESSAGE = 'Dynamic table creation failure on subpool'.
WHEN 2.
RAISE EXCEPTION TYPE CX_SEM_BPS_DATA_ACCESS EXPORTING
MESSAGE = 'Dynamic table creation failure'.
ENDCASE.
ENDIF.
ENDMETHOD. "CREATE_DYNAMIC_STRUCTURE
ENDCLASS. "CL_SEMBPS_DATA_ACCESS_FACTORY IMPLEMENTATION
Look at this link:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee19446011d189700000e8322d00/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee19446011d189700000e8322d00/frameset.htm</a>
Pls reward points.
Regards,
Ameet -
I purchased CS5 Design Standard about 5 years ago. Now I am trying to install second PC, but I got a message like " This serial number is not correct." I want to know the correct serial number, but I missed my ex adobe ID because I've changed my E-mail address.
It is not clear to me what your issue is with not being able to sign in to your Adobe account to find the serial number. You should still be able to sign in and find your serial number if you registered the software.
If your first PC is a Windows machine you might be able to extract the serial number from it using the Belarc Advisor
http://www.belarc.com/free_download.html -
How do i connect my macbook pro to another screen (a fujitsu siemens) i got the cable for it but i want to know the settings so i transfer desc to the fujitsu screen.
Welcome to Apple Support Communities
If you have the cable, just connect it to both and the desktop will show up on the external display. Then, you can select different modes, changing arrangement in System Preferences > Displays > Arrangement, or using shortcuts > http://support.apple.com/kb/ht5019 -
You want to know the amount of space the transaction log for the Customer database is using. Which T-SQL command would you use?
Forced me to do a little research.
DBCC SQLPERF(logspace)
See also
http://stackoverflow.com/questions/198343/how-can-i-get-the-size-of-the-transaction-log-in-sql-2005-programmatically
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles -
Im using a pci-6221 daq-card.I want to know the difference(use)of a line output and a port output.
Im using a pci-6221 daq-card.I want to know the difference(use)of a line output and a port output.
Hello Hellraiser24,
This question has actually been discussed in another thread here:
http://forums.ni.com/ni/board/message?board.id=170&message.id=95895&requireLogin=False
I hope this helps,
E.Lee
Eric
DE For Life! -
I want to know the algorithm of interpolation of 2-D array in LabVIEW.
I want to know the algorithm of interpolation of 2-D array in LabVIEW.Is there any formation about it?
Hi ,
For all delta and full DTP loads you can get information in table RSICCONT .Check table RSMONICDP this will give you detail information .Here you will get all the information with timestamp and request id .
Hope these tables will serve your purpose .
Regards,
Jaya -
I want to know the accounting produced by Oracle Financials module.
I want to know the accounting produced by Oracle Financials module. Could you please direct me to the right resource? Thanks
Hi,
Overall answer is YES you can read text file into Oracle.
Now tell us which technologies you are using and which database version you are using ? are you using Jdeveloper and ADF ?
Maybe you are looking for
-
The ways to return data from a stored procedure.
Hi, I know there are three ways to pass out a value from a Microsoft SQL stored procedure, but I have no clear idea what Oracle SP can do, I know Oracle doesn't support multi-recordset(v8), can not return a recordset by a inner select query, but I do
-
Hi team, Can any one tell what is the difference between payment terms on customer master data in Company code - sub tab payment transactions and sales area data-sub tab billing documents? Rgds Aki
-
I dont know apple ipod touch id-user name and password, how do i create or purchase
i dont know apple ipod touch id-user name and password, how do i create or purchase this is arockiarajfrompondicherry.
-
Business Object problem with terminal server
Post Author: Yaron CA Forum: Authentication Hello, I have a problem running Business Object ( version 5.1.8 at the moment, we might change to XI soon ) on windows 2003 terminal server (citrix) and we have problems from every station without full admi
-
I installed Mac OS 9.2.2 on my PowerMac AGP and when I go to change the startup disk to OS X.4 it doesn't show up. How do I get it to show OS X.4 so that I can go back to Tiger? Thanks