WAP 1142n not connecting to clients (laptops)

I have set up my WAP and RADIUS windows server 2008.
the WAP is not actually talking properly to the clients... the laptops can see the WAP but it isn't connected properly. The client won't get an IP, and has limited connectivity.
I tried changing the vLAN settings on the WAP, double checked it is on the right gateway, etc. it is very frustrating. I don't know why it won't 'talk' properly to its clients. obviously i took off Windows firewall just in case on the client.
I have also checked the RADIUS server settings again; it is all set to authenticate users and machines in the domain, has its certificate, is set to PEAP, has the WAP added as a RADIUS client.
I am not quite sure what has happened.
the switch it is on is set to DHCP leasing by the way.
can anyone help me? thanks!

Just beat me to it Gavin Yes, please check NPS logs for any success or failure and provide EAP failure code/description if present.
If your NPS authentication looks successful, then you need to troubleshoot why you aren't getting a DHCP address. I presume this is an autonomous setup? Could you provide the run-config of your AP and the AP switchport run-config? Also the run-config of the gateway interface and the DHCP scope config.

Similar Messages

Iphone not connecting to my laptop , itunes

hi , i have iphone 3gs , updated with ios4 , 2 days back i was suffering with issue of "This accessory is not optimized for this iPhone" and all sound issues were happening like no sound for songs etc but now thats all ok , my charger is doing well but now "my iphone is not connecting with my laptop , no itunes" it is not even getting connected to laptop . only charger is working , why is this happening ,,, friends plz help me out....

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests

HT1937 my phone dose not connect to my laptop ir dose not synic to itunes too

my phone dose not connect to my laptop ir dose not synic to itunes too

look for a post called itunes not recognising iphone 4s device not able to sync by grimhmfc
it worked for me
hope this helps

My adobe Flash player does not connect on my Laptop HP Windows 7.

My Adobe Flash 11 Player on my laptop HP Windows 7 does not connect. (or cannot be found even though it is downloaded in the programs

What means "not connect" or "cannot be found"? Do you get any messages?
You write "downloaded", but did you also install it?
What is your browser? If IE see
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968

HT1320 My ipod classic will not connect to my laptop / itunes

my ipod classic won't connect to my laptop? I've just syncd my iphone 4s and I've reset the ipod.......help?

Hello Downing55,
It sounds like your iPod is not being recognized in iTunes on your Windows computer. I found an article with steps to address this:
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/TS1369
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Passport HD not connecting properly to Laptop

I have a passport portable hard drive, which was working fine. Today I connected it to my laptop, the blue power light came on, but it did not register properly in my computer. I didn't hear the normal prompts I usually do either when USB devices are connected to the laptop. It is drawing power because the power light comes on, but the computer does not seem to be able to read it. What can I do to access the hard drive? I tried reconnecting a few times and even used a different computer, with no success. Any advice or help would be appreciated, thanks.

I have a potential solution, but first need to ask what your level of computer knowledge is, as it's not "hard" but you could mess something up if you do it wrong.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

Why will my ipad not connect to my laptop but my iphone and itouch will ?

I have connected it many times now and its just annoying me ... my iphone will connect to itune ... but i connect my ipad and it wont. it connects to the laptop but not itunes . HELP ?!?!

Type "apple mobile device service" into the search bar at the top of this page by Support adn read the resulting help article.

Wifi not connected to Lenovo laptop

My linksys new router is not connecting through Wifi. I am able to connect my iPhone and iPad. Please help. - Rick

@Rick What’s the model number of your router? It would also help if you’ll share with us the exact OS of your laptop or any error message that you’ve received. Make sure that you’re using the correct wireless settings of the router since it’s case-sensitive. Adjusting the router’s wireless channel is also a good move to avoid possible interference in your network. The recommended channels for the 2.4 GHz network are 1, 6, and 11 since they are considered non-overlapping channels. For the 5 GHz network, channels 36, 40, 44, and 48 are recommended.

My Tablet A1000F charges but does not connect to the laptop.

I need help i don't know what to do, I've tried resetting it, even connecting to other laptops, even different usb cords but it just wont let me connect to my lap top. so im asking for any ideas that will help me.

Try connecting it to another laptop and see if it connects. If so, moat likely it a corrup driver file on the laptop. Uninstall corrupt driver using device manager and plug tablet to reinstall driver or you can also do a system restore.

My i phone is not connecting in my laptop

HI
MY I PHONE 4 IS NOT CONNECTING TO MY LAPTOP

Sorry No, if your screen is broken, then you won't be able to unlock your phone.
You do backup your phone on a regular basis right?

SMP 3.0 with SP3 AgentryApp is not Connecting from Client : Communications error (14)

Hello,
In SMP 3.0 : Version 3.0.2, SP Level:02, my Agentry App : Work Manger 6.0 is working fine, it is running from device and running properly. After i migrate my SMP3.0 from SP02 To SP03, it is not connection from Any Device,(it is not showing any Error in Log file, Means App deployed successfully.) whenever we try to connect from Any device it is showing following Error Message.
Requesting Public Key from Server
Communications error (14)
Connection failed
Ending transmission
??? : Is there any other confugration need to do in SMP 3.0 : SP03???? please help on this Issue...
Thanks
Krishna

Hello Steve,
i go through the SAP Note 2008882. based on that Note i run the following
command.
C:\windows\Microsoft.NET\Framework\v4.0.30319\aspnet_regiis.exe -pa
"C:\SAP\MobilePlatform3\Server\configuration\com.sap.mobile.platform.serv
er.agentry" smpServiceUser.
Now that Error is Gone from Log file but still it is not allowing to
connect. Even from ATE also.
Event Log File :
06/19/2014 17:54:00, 0,         0,         0, Thr       3192, New files opened events.log, messages.log
06/19/2014 17:54:00, 0,         0,         2, Thr       3192, Loading the Agentry Runtime's public/private key for password exchanges.
06/19/2014 17:54:01, 0,         0,         2, Thr       3192, Upgraded the Agentry key pair from pre-SP03 format
06/19/2014 17:54:01, 0,         0,         2, Thr       3192, Key pair loaded successfully.
06/19/2014 17:54:01, 0,         0,         2, Thr       3192, Agentry Startup
06/19/2014 17:54:01, 0,        17,        14, Thr       3192, WebSockets Front End v7.0.3.205
06/19/2014 17:54:01, 0,         1,         4, Thr       3192, Agentry Server Agent v7.0.3.205
06/19/2014 17:54:01, 0,        20,       150, Thr       1656, Loading Development application definitions
06/19/2014 17:54:07, 0,        24,         4, Thr       1656, Loaded HTTPXML-HTTPXMLSystemConnection (HTTPXML v7.0.3.205) from ag3httpxmlbe.dll
06/19/2014 17:54:07, 1,         3,         9, Thr       1656, Java-1, Chickaming Java, initialHeapSize, File: , ..\agentry\SystemLogger.cpp#792:DTLoggerHandler::badKey
06/19/2014 17:54:07, 1,         3,         9, Thr       1656, Java-1, Chickaming Java, maxHeapSize, File: , ..\agentry\SystemLogger.cpp#792:DTLoggerHandler::badKey
06/19/2014 17:54:07, 1,         3,         9, Thr       1656, Java-1, Chickaming Java, reduceOSSignalUse, File: , ..\agentry\SystemLogger.cpp#792:DTLoggerHandler::badKey
06/19/2014 17:54:07, 1,         3,         9, Thr       1656, Java-1, Chickaming Java, nonStandardJavaOptions, File: , ..\agentry\SystemLogger.cpp#792:DTLoggerHandler::badKey
06/19/2014 17:54:20, 0,        23,         4, Thr       1656, Loaded Java Back End (Java v7.0.3.205) from ag3javabe.dll
06/19/2014 17:54:20, 0,        20,       152, Thr       1656, Loading Development application definitions for default localization
06/19/2014 17:54:20, 0,        20,       153, Thr       1656, Finished loading Development application definitions for default localization
06/19/2014 17:54:20, 0,        20,       151, Thr       1656, Finished loading Development application definitions
06/19/2014 17:54:21, 0,        20,         4, Thr       3192, Server v7.0.3.205
06/19/2014 17:54:21, 0,        17,        10, Thr       3192, WebSockets Front End v7.0.3.205
06/19/2014 17:54:21, 0,         0,         0, Thr       3192, Old log files moved into C:\SAP\MobilePlatform3\Server\log\agentry\rolled\2014-06-19-175400
06/19/2014 17:54:21, 0,         0,        23, Thr       3192, Agentry startup is complete.
Thanks
Krishna

TS1441 updated to latest itunes and now my iphone 5 will not connect to my laptop

updated to latest itunes and now my iphone 5 will not connect to my laptop

Connect in recovery mode, explained here:
iOS: Unable to update or restore

HT4061 i had a request yesterday to update ios now my phone is stuck with the screen showing the charger with an arrow pointing to an i tunes symbol. i cannot press or touch i had a request yesterdayanything and its not connecting via my laptop using the

i had an request yesterday to update ios7 i did this and now my phone seems to be stuck with the picture on the screen of the charger pointing to the symbol i tunes. i cannot tap the screen to go anywhere else and even if i connect to my laptop via the usb still nothing. can anyone help plz

Hey robthetiler!
Try the steps in the following article to resolve this issue:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Help with WAP 1142n not displaying web browser?

Hi all
Sorry I am new with the Cisco WAP.
I have my device configured, and it has an IP, subnet, etc.
I currently have it connected with serial port to my laptop and used PutTy to get into it, that's no problem.
However, despite it having an IP, I cannot use the web browser with it! This is driving me mad. I want to use the web browser and not the CLI for everything. Let me know if you need screenshots. Everything looks ok to me....it has a BVI1 IP as well as an Ethernet address.
thanks in advance!

You currently have configured...
no ip http server
ip http secure-server
Are you sure you are navigating to "https://" ?

Hp officejet pro 8610 wireless not connecting to my laptop

I have connected my HP Officejet Pro 8610 to my wireless network to my laptop But when I go to install drivers wirelessly, I get connection failed. 1. download: HP Officejet Pro 8610 e-All-in-One Printer series Full Feature Software and Drivers2. use Use HP Download and Install Assistant (Recommended)3. click install from download assistant4. Extracts5. turn on printer6. Get pop up window with 3 sequences 1. prepare... sucessful 2. connnect (wirelessly) click continue7. Printer Setup & software: click convert to USB connected printer to wireless8. Network setup: identifies my wireless network9. select yes for "So you want to continue to use your printer on this wireless network?"10. Unsuccessful network Instalation. Disabled fwwent through router configures enabling channel 11.Still failsRan hpscan dr. goes through it's steps, goes to d/l install. click install says extracting, finishes (but doesn't say anything and goes away).And nothing happens. So basically went through the HP troubleshooting and they don't work. Please helpThanks, Frustrated... PS please move this to the appropriate forum, thanks

,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Thank you for visiting the HP Support Forum.

WAP 1142n not connecting to clients (laptops)

Similar Messages

Maybe you are looking for