WAP Key Issue -- Model WRT54G

Hey guys. Here is the deal. I just moved in with a couple of roommates. The guy that was living in my room before I left put together the wireless network. The guy left on bad terms with the other roommates. So, what is going on now is we have no idea what the WAP key is and the settings have been changed for the default login for the website login. Is there anyway to find out what the WAP key is still or do we need to go out and get a new router? Thanks for your time.

If you can access the router's setup pages (usually at 192.168.1.1 ), then you can go to the wireless security section, in the router, and look up the WPA encryption key.
If the router's setup pages are password protected (the default is "admin"  (with no quotes) ) ,  and you cannot get into the router, then the only thing you can do is reset the router to factory defaults, then setup the router again from scratch.

Similar Messages

  • Tecra M10 - Stuck CTRL key issue -- perhaps to do with BIOS?

    Hello and thanks for reading.
    I recently switched my Tecra M10 to Windows 7 (from XP) and it soon developed the dreaded "stuck CTRL key" issue. This causes the keyboard to behave as if the CTRL key is permanently depressed. Sometimes hitting a combination of keys, or bringing up the onscreen keyboard, temporarily solves the issue, but then it returns.
    It seems to be an issue many people have, with no simple solution. I've looked at every thread about it I can find, and tried many things to do with drivers etc. without any success.
    So firstly, if anyone knows a remedy that works for this particular machine, I would be very grateful to learn it!
    Then, there are two things I've not yet done: update BIOS and disable pinch zoom.
    I was looking at the following BIOS update:
    http://www.toshiba-asia.com/sg/support/drivers/details/25244
    ... which is version 3.00 and seems to be most recent. My own version is 1.90.
    However version 3.00 is labelled "For PTMB0* ONLY". I don't know what this means or whether it applies to me. Can anyone help? Should I install this BIOS?
    For the pinch zoom, I've been told that disabling it does sometimes cure the CTRL problem -- but I can't find any pinch zoom facility on the M10. I suspect it simply doesn't have one. Is that right?
    Many thanks for any help you can give.

    Hi
    > I was looking at the following BIOS update. which is version 3.00 and seems to be most recent. My own version is 1.90.
    There are different Tecra M10 models on the market.
    Check the labels at the bottom of the unit. There you should find some numbers like for example PTMB0E-01K00LGR
    The first 6 characters are important: for example PTMB0E
    I assume your notebook belongs to European series.
    In such case you should check the Toshiba EU driver page for possible BIOS update.
    http://www.toshiba.eu/innovation/download_drivers_bios.jsp
    However, on Toshiba EU driver page you will find also the BIOS v3.0 for all European Tecra M10 units.
    Anyway, back to the CTRL button issue: guess what, you should connect an external USB keyboard and should check how the CTRL button acts.
    In case the USB keyboard would work properly, the CTRL button of internal keyboard is affected and you will need to replace the internal keyboard.
    PS: it could be possible that the option "sticky keys" has been enabled. To disable this function, you have to press SHIFT button 5 times in the row.

  • Repeating key issue

    I just moved to the Mac a couple of months ago. I love it and haven't looked back. However, today, I used my Mac twice. First, this morning, I didn't do anything unusual. I cleared out my trash, browsed a bit on the Internet and answered e-mail. Then I modeled some artwork. I shutdown my machine, shutdown my cable modem & router and went to work. When I came back at lunch nothing was wrong and I hardly did anything (Internet still wasn't on).
    However when I came home after work, I started the machine up and the hard drive icon kept popping up and it was difficult to use the menu because I had to hold down the mouse button instead of just click. It turns out that the space key is repeating spontaniously. I thought it might be the keyboard but it doesn't stop when I unplug the keyboard.
    Has anyone had this before? How do I cure it? Thanks.

    Hi Redspark,
    Did you arrive at any solution to your repeating key issue? I've recently joined the discussions forum because I'm having a similar problem - without having typed anything, my backslash spontaneously inserts itself into any text box available and starts repeating itself across the page. In the Finder, I also get various folders spontaneously highlighting themselves, if I pull down a finder menu, it flashes which makes it almost impossible to select anything. As well I get sudden outbursts of the error chime.
    Have done an Archive and Install, reset the PMU. I've also zapped the PRAM, checked my RAM slots, checked Permissions, etc.
    Let me know if you've got any further insights.
    Thanks.

  • Forgot WAP key,please help!!!!

    Ok,I use WRT150N model,and windows vista  if it helps...
    I'm connected at this moment,but I want to connect my PS3 wirelessly,the problem is I totaly forgot my SSID  and WAP key,I searched the whole apartment and can't find my notebook where I did put that info. ,how can find this info. on my PC,or what software may help...
    Please explain step by step,I'm reanot that good with computers! ^_^

    have you changed the router's password, if you have type it in. if you haven't, restore to factory settings by pressing reset button(at the back, red color) for 30 second and let it reboot. type 192.168.1.1 and again username blank password admin
    this will put your router in factory default, which means all your settings will be lost.
    Message Edited by luimar on 09-03-2008 05:37 PM
    l. ceron

  • Wireless-G Model WRT54GS V7 Firmware 7.50.0 - easylink Advisor 1.5.1044

    I have a Wireless-G Model WRT54GS V7.50.0 Firmware for easylink Advisor 1.5.1044
    Connected to a highspeed connection, and then connected (Hardwired in port 1 of router) to a Dell system running XP SP3.
    I bought a new Laptop that is running Windows 7 and the laptop causes the connections to drop when it is powered on.
    Then the laptop is always dropping the connection and re-establishing the connection. Is this problem because of windows 7?
    If I do not bring the laptop up, i can run the desktop with no problem. Running WPA security mode.
    Thanks in advance for any help you can give me.
    John

    Is your Desktop computer is a Wired or Wireless? Are you facing the problem only on your Windows 7 Computer or on all the wireless computers?
    You can try to change the Wireless Settings on your Router and check if that makes any difference... 
    Login to the setup page of your Router and click on the Wireless tab.... and below change the Wireless Channel to 11-2.462GHz and click on Save settings.... Then click on the Sub tab "Advance Wireless Settings" and below Change the Beacon Interval to 50 .....Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2307 ....Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect... 

  • Hi, I have a wireless linksys router model WRT54G. what i...

    Hi, I have a wireless linksys router model WRT54G. what i want to do it´s configure a network in my home. I have 2 pc´s, a laptop an a desktop. what I should do to be able to share files,music,videos. between both computers? the laptop has Windows Vista, the desktop has Windows XP Professional. could you give me more details? step by step.   thank you really much.

    its really simple to set up a network, first make sure that all computers are in the same workgroup by right clicking on my computer, then properities, then computer name.
    there you can make the setting for the work group
    do not use the default one, create your own, do this for each computer.
    next thing is to choose any folder that you want to share and right click on it, select sharing, then check the two boxes to share this folder and the other one to allow others to make changes to this folder.
    doing this bypasses the trouble od setting up passwords for right now.
    you should not have the network up and running with folders being shared with all in that workgroup.
    you may want to check the manual for vesta as it may do things a bit differant that xp
    you could also run the create a network wizard in the xp system. 

  • Windows 8 Key Issue

    Here's my problem.  Windows 8 came preinstalled on my computer; however, I accidently deleted the Windows 8 key from the bios and now Windows keeps asking me to enter the correct key.  Since there is no longer a sticker with the key included with the computer I have no way of finding the key.  Does HP keep a record of the keys tagged to the serial number?  Or am I just out of luck?
      I called HP Support about this and they told me to get the key off the CDs which were included with the computer.  When I told him there were no CDs, he said I had bought a used computer mascarading as new because all of their computers ship with Windows CDs.  When I disputed this he said that Microsoft could solve the issue for me.  Microsoft said that HP could solve it.  Can anyone help me?  I'd rather not spend money on buying Windows 8
    Thanks in advance,
    Mike
    This question was solved.
    View Solution.

    HP does not retain records of the keys issued .  HP also does not ship Windows CD's with the computers unless they were specifically ordered.  If you have somehow deleted the key then you are out of luck, sorry.
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • T400 stuck key issue

    I bought my T400 2764-CTO in last December, and started using it on mini dock without any problem. Until recently, it starts to show stuck key issue randomly (not always failure) both at boot up or under Windows Vista.
    ERROR
    0210 Stuck Key FF
    Press <F1> to SetUp
    Note: the stuck key keeps changing, sometimes 13, sometimes 1F, sometimes other key.
    I opened the laptop, and checked the connection of the keyboard but couldn't locate any problem there. Can this be a keyboard issue? Or even a motherboard issue?
    Can Lenovo swap a new keyboard for me? If so, what do I need to do then? 
    Thanks!
    Best Regards  

    You can call Lenovo service, and log a service call, they will make the necessary arrangements. If you are not confident with bios update then please don't do it youself, and let the warranty department do it for you, as any mistakes can make your laptop useless and you will be paying couple hundreds of euros to get the motherboard replaced. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Does wireless Key board Model # A1016 work with the Macbook air?

    I have an old Apple wirless key board Model # A1016, I am trying to pair it with my Macbook air. Doesn't seem to be working, does anyone know if it is even compatible or not?

    My understanding is that the BWI uses an 802.11b wireless standard that is perfectly compatible with the built-in reception that the MBA has.
    Is there anything that would lead you to doubt the compatibility?

  • Problem setting up model WRT54G

    I am having difficulty in setting up my Wireless -G Broadband router model #WRT54G.  I Have Comcast High-Speed Cable Internet.  My internet connection times out after a few minutes and my connection is lost after a successful configuration of the router.

    Try MAC address cloning, and see if this corrects your problem.

  • Model WRT54GS v.6 Acting Strange

    I use a Wirless-G Broadband Router Model WRT54GS V.6
    Well, I got it configured and everything for a DSL connection, and it connects normally.  Then, it randomly just stops working and when I remove the Ethernet cable and blue plug from the router, it seems to be working again.
    Now, when I put the connection back in, it does the same thing.  The router's lights start blinking and on the computer it would have "Internet Connection Complete" then go to "Local Area Connection Unplugged" and it would keep going in that cycle.

    visit here... http://www.linksys.com/servlet/Satellite?c=L_CASupport_C1&childpagename=US%2FLayout&cid=1166859678292&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=7829277881B02
    l. ceron

  • Failure to install Arch Linux via netinstall AIF; PGP key issues

    Hello,
    I'm am attempting a fresh install Arch Linux on a clean machine: Dell 1420, 4GB RAM. I am using the archlinux-2012.02.09_04-00-01-netinstall-dual.iso installer.
    Installation progresses nicely through the package selection (I choose core, core-dev, xfce, and xorg packages only, to keep it simple for now). The packages download quickly, and then the installation fails during installation indicating that none of the PGP keys are known for any of the downloaded files. The process essentially aborts and I press 'Continue' returning me to the main menu. I have repeated this process several times.
    What needs to be done to install Arch Linux?
    Thanks.

    Hi,
    Thanks, I have been through the Beginners Guide. I just want to get Arch Linux to "start" with a very basic GUI. during one of my installation iterations I did install only 'core' files, but the same failure occurred. so I'm at a loss as to how to get even a basic installation to take hold. Thoughts on the pgp key issues?
    Thanks.
    Update: I've switched to using the default net installer (2011.08.19) and the installation succeeded!
    Last edited by zaleksf (2012-02-12 05:12:32)

  • Key issues involved while  technical upgrade of 4.6c to ecc 6

    Hi Guru's
      Will anyone share the key issues and time consuming activities involved  in  tech upgrade project from  4.6 c to ecc 6 at different stages.
      Mail  me [email protected]
      Reward full points for the answer
            Regards,
    Venkat

    Dear Venkatesh ,
    Please visit the following links:
    http://service.sap.com/erp
    http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
    http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
    For Functionality Differences pls refer to the below site -
    http://solutionbrowser.erp.sap.fmpmedia.com/
    After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
    Select the Solution Area like Financials, Human Capital Management, Sales....
    Select module like MM, PP, SD, QM.....
    Click on Search
    Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
    and also check the release notes of ECC 6.0 in service.sap.com.
    Hope this helps you.
    Do award points if you found them useful.
    Regards,
    Rakesh

  • Model WRT54GS Wired Connection

    Model WRT54GS but i have my xbox 360 connected to it by a ethernet cable. i also set the port range and set a IP manually to the 360. I'm still getting strict Nat. Also, i have DSL Internet and i set the port range and firewall to the 360 IP on the DSL Modem. Wen I made the port range settings it was saying open Nat,A Day later it goes back to strict. i rechecked the port range settings and they are still set. I also have a PS3 connected wireless to the router, i set the port range for it as well. I've had no problems with the ps3 only the 360. Made sure IP are different. Help?

    Ya i forgot to mention I put the DMZ to the PS3 and it makes it Type 2 NAT but wen i take it off the PS3 it goes to Type 3(type 2-router connection open NAT Type 3-Router Connection Strict NAT). But when i put it to the 360 it still says Strict NAT. I have the IP addresses= PS3(192.168.1.15) 360(192.168.1.115). After reading your post I updated the Firmware but has not fixed problem yet
    Message Edited by JBrody89 on 02-02-2008 11:53 AM

  • Wireless G model WRT54G VERSION 8

    I have Wireless G model WRT54G VERSION 8 and I was wondering is there anyway for me to turn off the wireless part cause I have no use for it right now. I just want to use the wired connections ports  to connect my computer and my xbox360.

    User's manual, page 9, wireless network mode.

Maybe you are looking for