WAP2000 Admin console not accessable

I'm having an issue with our WAP2000 access point. I had to reset the access point and now I can't access the admin console. I've set a static IP address just as I did when I first set it up. Now when I browse to the 192.168.1.245 in my browser it just displays an Authentication error. Need some help with this please.

Ok so here is what needs to be done.
If you are using the WAP2000 you may(will) have some issues if you are trying to configure your device you must have it attached to a router that has 192.168.1.* class c IP Range. If not you will have some issues. Once you have that part you can then move on to accessing the admin console.
If the router is wireless or wired make sure that DHCP is turned on so that you can insure that you will recieve an IP address in the same range. With that done connect to the Router not the WAP and wait for the connection to be established. Once that is done you can then browse to either 192.168.1.245 or http://192.168.1.245. once inside set the WAP to accept web support this way no matter what IP it gets once configured you can access it.

Similar Messages

Hi Team Admin console not connecting

Hi Team,
I am using sccm2007 sp2 in one of the primary. I am unable to connect admin console getting attached error. Actually one of my team met did the repository rename.. Is it cause issue? if yes. how can i back the track

Previously i able to connect the sccm primary console. now i am not. I checked permission vise everything good..
So that i capture my adminui.log ..
one of my team met done the repository rename in primary server. My question that's y i am not able to connect the sccm server. when i tried to connect in WMI root\sms_sitecode getting error.. can you understand now? or not
There is no getting back the WMI namespace if it was renamed or delete. It is not supported to do this without contact CSS directly for support.
You have two options, Attempt to clean up the mess of renaming the WMI. This might take a while due to the complexity of WMI and the unknowns of what was exactly done.
Call CSS and tell them what exact you have done and get them to work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Resources created w/MQ Admin Console not seen in GF Admin console

Environment:
Glassfish Enterprise Server v2.1
JDK 1.6.0_11-b03 (bundled)
Sun Java(tm) System Message Queue 4.3 (Build 7-g)
Windows XP SP3
Following the documentation in Chapter 1 of the Sun Java System Message Queue 4.1 Administration Guide[1] I used the MQ Admin Console SWING tool to create an ObjectStore with the following properties:
java.naming.provider.url - file:///C:/imq_admin_objects
java.naming.factory.initial - com.sun.jndi.fscontext.RefFSContextFactory
In that object store I created six destinations (3 Queues and 3 Topics) along with one connection factory.
I also used the Admin Console to create one Broker with host set to localhost and primary port set to 7676. Within that broker I created 6 physical destination for the destinations I created in the object store.
In the Glassfish administration console under Configuration -> Java Message Service -> JMS Hosts -> Physical Destinations none of the ones I created in the Broker using the MQ Admin console were visible. I suspected this was due to the fact that GF needs the naming properties I set when I created the ObjectStore with the MQ Admin console so I set them under Configuration -> Java Message Service : Additional Properties. When I did that and restarted the domain the physical destinations I created with the MQ Admin console now showed up in the GF admin console's Physical Destinations section.
However, the ConnectionFactory and Destinations I created in the ObjectStore do not show up in the GF Admin console's Resources -> JMS Resources -> Connection Factories and Resources -> JMS Resources -> Destination Resources respectively. I suspect this is also a case of needing to feed some properties to the domain somewhere but I don't see an obvious place to do so. Nor am I sure what they should be since they need to be scoped to the JMS resource but simply adding a property like java.naming.factory.initial to a more global scope then one affecting only JMS would be 'a bad thing'.
FWIW the GF Enterprise Server 2.1 Administration Guide [2], Chapter 4 - Configuring Java Message Service Resources does not touch on this subject either.
TIA,
-NBW
[1] http://docs.sun.com/app/docs/doc/819-7755/gcrlv?a=view
[2] http://docs.sun.com/app/docs/doc/820-4335/abljw?a=view
Edited by: NBW-2009 on May 27, 2009 1:24 PM

You might want to check with the glassfish/application server forum first
http://forums.sun.com/category.jspa?categoryID=109
-Mathi

Admin Console not displaying new Users and Groups from LDAP

We created a new Realm in WebLogic, which specifies the location of the Netscape
LDAP server. Our Weblogic application, called TGSLC, is able to find the ldap
server to use for authentication. My problem is this- the Admin Console is not
displaying the new users and groups from the LDAP server. Shouldn't the WebLogic
Admin Console display any users and groups specified in the ldap server, which
is referenced in the customized Realm?

Hi Andy,
I am not sure why you are unable to see the users and groups through the
console., you should be able to. Can you post the config.xml?
thanks,
-satya
Andy Levy <[email protected]> wrote in message
news:3b700c36$[email protected]..
>
We're running WLS 6.0 Sp2 on Windows 2000 Professional.
"Satya Ghattu" <[email protected]> wrote:
Andy,
Could you please tell us what Version of Weblogic you are running?
thanks,
-satya
Andy Levy <[email protected]> wrote in message
news:[email protected]..
We created a new Realm in WebLogic, which specifies the location ofthe
Netscape
LDAP server. Our Weblogic application, called TGSLC, is able to findthe
ldap
server to use for authentication. My problem is this- the Admin
Console
is not
displaying the new users and groups from the LDAP server. Shouldn'tthe
WebLogic
Admin Console display any users and groups specified in the ldap
server,
which
is referenced in the customized Realm?

Admin Console Not Displayed !!

Help please ! This is a wierd problem. We cant get the admin console (port 7001)
to come up in a browser. The browser just runs and runs and never displays an
error message ... we were able to see the console a couple of days ago ... never
saw anything like it. Admin server is running and application server instance
is running ,,, we can see application in browser ,, just not Admin console !
Any ideas ? Appreciate any help ...

just re-start the admin instance and then tpye the correct url on a new browser
window.
let me know if this helps !!!
Frank D. Greco <[email protected]> wrote:
"E allen" <[email protected]> sez:
Help please ! This is a wierd problem. We cant get the admin console(port 7001)
to come up in a browser. The browser just runs and runs and never displaysan
error message ... we were able to see the console a couple of days ago... never
saw anything like it. Admin server is running and application serverinstance
is running ,,, we can see application in browser ,, just not Admin console!
     I've had the same problem (in IE). I have to kill IE and restart it
     quite often.
     Also, Opera has significant problems with displaying the console (the
     left-hand applet).
     It may be a JVM-versioning, which I haven't checked yet. I'm using
     the 1.4 plug-in JVM, not the default 1.1 JVM (circa 1997) of
     MonopolySoft.
     frank
+=========================================+
| Crossroads Technologies Inc. |
| Enterprise Java Engineering |
| Web: www.CrossroadsTech dot com |
| Email: fgreco @ crossroadstech dot com |
+=========================================+

GUI Admin console not launching and fixed

Hello,
I spent some time on this might help someone...
I installed the Sun Java System application 8, everything worked (app server, pointbase, deploytool) except the gui admin console (localhost:4848). It would not launch. It <blinked>blinked</blinked>. Really - the tab text blinked on firefox. So I ...
1. checked PATH and JAVA_HOME to be correct.
2. rebooted
2. reinstalled appserver
3. rebooted
4. tried firefox & microsoft ie
To no avail.
I then turned off my firewall. It worked. It might for you too.
ciao,
-rob

Hi Andy,
I am not sure why you are unable to see the users and groups through the
console., you should be able to. Can you post the config.xml?
thanks,
-satya
Andy Levy <[email protected]> wrote in message
news:3b700c36$[email protected]..
>
We're running WLS 6.0 Sp2 on Windows 2000 Professional.
"Satya Ghattu" <[email protected]> wrote:
Andy,
Could you please tell us what Version of Weblogic you are running?
thanks,
-satya
Andy Levy <[email protected]> wrote in message
news:[email protected]..
We created a new Realm in WebLogic, which specifies the location ofthe
Netscape
LDAP server. Our Weblogic application, called TGSLC, is able to findthe
ldap
server to use for authentication. My problem is this- the Admin
Console
is not
displaying the new users and groups from the LDAP server. Shouldn'tthe
WebLogic
Admin Console display any users and groups specified in the ldap
server,
which
is referenced in the customized Realm?

BizTalk Admin Console not responding when loading configuration

Hi All,
I have a BizTalk 2013 R2 test environment which has separate BizTalk and SQL servers.
Due to something went wrong with the BizTalk server so I built another BizTalk
server and joined the same BizTalk group and I also moved the master secret
server to the new BizTalk server. I removed the old BizTalk server from the
group and shut the old server down.
But when I am using the new server to load the configuration for any receive or send ports,
the MMC gave me the "this snap-in is not responding" alert and if I canceled the alerts a couple of times, the configuration info can be loaded.
The admin console is fast when not loading configuration though.
Does anybody have any ideas what could be wrong?
Thanks,
David
David

This issue could be because of many reasons. Work on the below pointers.
1) I would suggest you to start with performing BizTalk Repair to avoid any registry issues, because in most of the cases Admin console related issues are solved by BizTalk repair only.
2) Check if SQL Server and MSDTC service is running properly.
As a Last option collect DebugDiag logs and try to analyze the same.
https://www.microsoft.com/en-us/download/details.aspx?id=42933
Check the below articles as well.
http://blogs.msdn.com/b/biztalknotes/archive/2014/02/20/biztalk-server-admin-console-fails-to-launch.aspx
http://support.microsoft.com/en-us/kb/2449532
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

Admin Console not logging in on AWS

This topic has come up a lot and I've ready through many of them, but none of them seem to have my exact issue. I recently setup Flash Media Server on Amazon EC2 and things are going well so far; however the admin console wont login. I've set the username, password, and port in the config file and opened that port, among others, in the security group. I've then restarted both FMS and admin server multiple times.
When I try to login I get no errors. Nothing happens at all. When I open FireBug and/or Fiddler2 to watch the communication, I'm not seeing a single thing happen. Clicking "Login" submits no requests at all. Do I just not understand how FMS works? I would assume some sort of request would need to be made.
Eric

Does firebug/fiddler captures "rtmp" traffic - i suppose not and hence you are not catching anything.
Are you able to telnet to <serverip>:1111 from your machine(which you are using to login) ?
Also did you check Admin logs if there is anything logged and also checked if Admin server started successfully.

Admin Console not refreshing

I am running WLS v6.1 sp2 and using the monitoring feature of the admin console
to view MDBs. Under a load of 200 requests we cannot refresh the monitoring view.
The hourglass icon appears for the pointer and will only refresh when all requests
have completed.
Any suggestions why we have to wait 'til the MDBs return to an idle state before
the console will refresh?
Thanks ...

just re-start the admin instance and then tpye the correct url on a new browser
window.
let me know if this helps !!!
Frank D. Greco <[email protected]> wrote:
"E allen" <[email protected]> sez:
Help please ! This is a wierd problem. We cant get the admin console(port 7001)
to come up in a browser. The browser just runs and runs and never displaysan
error message ... we were able to see the console a couple of days ago... never
saw anything like it. Admin server is running and application serverinstance
is running ,,, we can see application in browser ,, just not Admin console!
     I've had the same problem (in IE). I have to kill IE and restart it
     quite often.
     Also, Opera has significant problems with displaying the console (the
     left-hand applet).
     It may be a JVM-versioning, which I haven't checked yet. I'm using
     the 1.4 plug-in JVM, not the default 1.1 JVM (circa 1997) of
     MonopolySoft.
     frank
+=========================================+
| Crossroads Technologies Inc. |
| Enterprise Java Engineering |
| Web: www.CrossroadsTech dot com |
| Email: fgreco @ crossroadstech dot com |
+=========================================+

Admin console not opening

Hai Folks,
I have installed Weblogic8.1 SP5.I have created mydomain with user name,password,and all other portdetails host.
When I start server it is running properly with out any errors..the out put window shows the below message..
Starting weblogicserver with Java HotSpot(TM) Client VM Version 1.4.2_0
Inc.>
2006 11:14:55 AM CDT> <Info> <Configuration Manageme
r is being started as the administration server.>
2006 11:14:55 AM CDT> <Info> <Management> <BEA-14110
8.1 SP5 Mon Sep 19 23:06:54 PDT 2005 641358
XMLX Module 8.1 SP5 Mon Sep 19 23:06:54 PDT 2005 6
2006 11:14:56 AM CDT> <Notice> <Management> <BEA-140
ration from configuration repository at C:\bea\user_
config.xml.>
2006 11:14:59 AM CDT> <Notice> <Log Management> <BEA
e C:\bea\user_projects\domains\mydomain\myserver\mys
ver side log events will be written to this file.>
2006 11:15:02 AM CDT> <Notice> <Security> <BEA-09008
ing security realm myrealm.>
2006 11:15:03 AM CDT> <Notice> <WebLogicServer> <BEA
Admin Server "myserver" for domain "mydomain">
2006 11:15:11 AM CDT> <Notice> <WebLogicServer> <BEA
dmin Server "myserver" for domain "mydomain" running
2006 11:15:11 AM CDT> <Notice> <WebLogicServer> <BEA
RUNNING mode>
2006 11:15:11 AM CDT> <Notice> <WebLogicServer> <BEA
ad.Default" listening on port 7001, ip address *.*>
But when i try to open admin console through browser giving the url as
http://localhost:7001/console the page is not displaying its giving page not found error.I tried it again by restarting the system,but again the same problem..Please help me regarding this problem.
Thanks,
Sai

Hello, Sai! Can you give us some more info? Such as:
- Operating system
- Browser used
- Whether anything comes up in the output window
- Whether anything comes up in the log files (domain log, server log, etc.)
Some suggestions:
Did you wait a bit after starting? Perhaps it hadn't quite started yet (unlikely).
Do you have a firewall running? Perhaps it is blocking port 7001.
Does your hosts file resolve localhost to 127.0.0.1? You could just try http://127.0.0.1:7001 instead.
Make sure that you have Java enabled (although I think you would still get the login page even if you didn't have Java).
Try a different browser.

Admin Console not working

I am not sure what I am doing wrong, but my admin console does not appear to be working. I have 7 different computers right now playing a 10 minute video from the FMS. All are playing the video via http://myserver/vod/video.mp4. I open the admin console and it is not showing any connections playing under current connections.....but there ARE 7 successful connections as I am watching them play right now. Maybe the admin console is not set up correctly? This forum has been amazing at answering my questions....I hope this question is no different.

Ugh....
See the big problem is we cannot use rtmp:// because we have a bunch of users on iPad's that do not use flash. So we are using (Apache) and the http://. I just do not understand why the console will only see connections if they are rtmp??? Can I see these connections anywhere else?

Admin console not displaying the performance statistics

On our WL92mp2 admin console (environments -> servers (either server in the cluster)-> monitoring tab -> performance ), we don’t see the performance information on the web page. We are using Jrockit 1.5.0_12-b04. Please let me know if this is a known Jrockit bug.
What is the solution for this.
Thanks in advance.

Here is the error message:
<Error> <Console> <BEA-240003> <Console encountered the following error Exception during RequestDispatcher.include().
Throwable: javax.xml.transform.TransformerException: javax.xml.transform.TransformerException: com.sun.org.apache.xml.internal.utils.WrappedRuntimeException:
The entity name must immediately follow the '&' in the entity reference.
Stack Trace:
javax.xml.transform.TransformerException: javax.xml.transform.TransformerException: com.sun.org.apache.xml.internal.utils.WrappedRuntimeException: The entity
name must immediately follow the '&' in the entity reference.
at com.sun.org.apache.xalan.internal.xsltc.trax.TransformerImpl.transform(TransformerImpl.java:673)
at com.sun.org.apache.xalan.internal.xsltc.trax.TransformerImpl.transform(TransformerImpl.java:300)
at com.bea.console.taglib.html.TemplateTag.doAfterBody(TemplateTag.java:102)
at jsp_servlet._jsp._core._server.__servermonitoringperformanceform._jsp__tag15(__servermonitoringperformanceform.java:731)
at jsp_servlet._jsp._core._server.__servermonitoringperformanceform._jsp__tag13(__servermonitoringperformanceform.java:661)
at jsp_servlet._jsp._core._server.__servermonitoringperformanceform._jsp__tag12(__servermonitoringperformanceform.java:622)
at jsp_servlet._jsp._core._server.__servermonitoringperformanceform._jsp__tag11(__servermonitoringperformanceform.java:581)
at jsp_servlet._jsp._core._server.__servermonitoringperformanceform._jsp__tag1(__servermonitoringperformanceform.java:212)
at jsp_servlet._jsp._core._server.__servermonitoringperformanceform._jspService(__servermonitoringperformanceform.java:137)

Changes to phone devices in CUCM admin console not being configured on phone

I can log in to the CUCM admin page and make changes to phone devices. The changes made are reflected in both the PUB and both SUBs. Devices do not take changes however. Reset and restart commands from admin page on devices do not actually reset or restart devices. Physically resetting device by unplugging switch port on phone does not help reflect configuration changes. Verified TFTP settings are correct and reset the TFTP service on servers. Troubleshooted on Cisco phone 7945 and 8945. Any help on how to resolve this?
CUCM ver. 9.1.2
Phones 7945 Phone Load 9-3-1SR3-1S
Phone 8945 Phone Load 9-3-4-17

Hi,
This points to some database issue, the database replication may be broken. Please check through RTMT and see if the database replication state is 2 for all the servers. You can try a 'utils dbreplication stop' on all servers followed by a 'utils dbreplication reset all' on the Publisher. Another quick fix would be a restart of the ccm service.
HTH
Manish

Problem with Admin Console not responding

I had an issue with the adminConsole hanging.
It stopped responding properly, I could not drill in past "Clusters" to get detail on "servers".
This happened when a box or an individual "Linux Server" that has multiple WL server nodes running on it, that are part of two clusters in the same domain.
The WL environment is WL 10.3. We can find no root cause for the box simply crashing. It physically had to be power cycled, and when it came back it came up clean with no issues and has been running fine for a few days with no more issues.
To paint a picture:
AdminServer for funkyDoomDomain runs on Linux box called adminBoxOne
In the funkyDoomDomain there are 4 clusters (chickenCLuster, duckCluster, pigCluster, horseCluster) in each cluster there are 3 nodes
each node targets a separate box, nodeBoxOne, nodeBoxTwo, and nodeBoxThree.
So what happened was nodeBoxOne went down, we have monitoring scripts that tell us if there is anything wrong with the box and all it's parts, even the health of the WL nodes, we received zero alerts so we have no root cause, but that is not the point of this post.
The point, the question is, does anyone have an idea as to why the AdminServer for the funyDoomDomain would stop responding properly.
A note here is that we have a bunch of t3 python scripts to work with applications and clusters(nodes), these scripts got the same behavior. I could not check the health status of nodes still running on the other two boxes in the domain.

mmm, it could be CPU, it could be a network-related issue... are you using multicast or unicast?
can you reproduce the issue?
if yes, can you run "top" to verify the CPU usage,
and do a thread dump on the admin server?
or at that point the box is entirely unresponsive?
in that case, running a scripts which periodically does a thread dump, and running top to sample every 10 seconds, could help...
jm2c

Informatica Repository Server Admin Console-Not creating a new repository

Hello, On Windows2000 server, As I am trying to create a new repository, the repository creation window just never disappears after I click OK. I have entered all information on all tabs. But repository is not getting created. I have tried this many times. Any ideas?

The Repository can only be created using the Repository Server Administration Console.
See Page 113. "Process of Configuring and Managing the Informatica Repository"
in Oracle Business Intelligence Applications Installation and Configuration Guide Version 7.9 February 2007
The "Setting Up" step is out of sequence in the guide.

WAP2000 Admin console not accessable

Similar Messages

Maybe you are looking for