WAP321 MAC Filtering Not Working

Hello,
We have 6 x WAP321's setup via "Single Point Setup". We have enabled MAC Filtering and set to "Block all stations in list".
We have added one device into this list and confirmed this replicates around all the APs. However, it doesn't prevent the device from joining the wireless.
We have tried rebooting the APs and upgrading their firmware (1.0.5.3 ).
No difference.
Anyone else seen this or have any ideas?
Regards
Charlie 

Hey blecp1,
Can you try a full default of the modem and see if it still happens?
Brodie

Similar Messages

  • MAC Filtering Not working

    I have a Netgear CG3100D. When I try to set up MAC filtering (by loging into the Admin console), the list of trusted devices never seems to be accurate (i.e. things are missing off the list) and does not pull in the actual device names.  Can anyone help ?  

    Hey blecp1,
    Can you try a full default of the modem and see if it still happens?
    Brodie

  • I have an iMac with OS Lion. The Smartart feature for Office for Mac will not work when I am logged on to my personal user account. It works with other user accounts on the same computer, and it works after "safe start". How can I fix the problem?

    The Smartart feature of Office for Mac will not work in my user account. It works for all other user accounts on the same computer, and it works after a "safe start". How can I fix the problem?

    You may also want to search/ask in the forums run by the people who make the product which is causing you problems:
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011

  • Accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help

    accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help

    I'm going to assume that since you deleted your hard drive and all its files, you had a backup, yes? If the backup has an OS (bootable clone), then you can boot into it by holding down the option key when you start up you iMac and choose the backup drive. Then use Carbon Copy Cloner or Super Duper to copy the files back to your iMac.

  • My photo booth in mac in not working for many days so please give me any suggestion to solve that problem......

    My photo booth in mac in not working for many days so please give me any suggestion to solve that problem......
    And my Airplort utility does't catch any other wireless devices please provide help....

    fubar

  • RV220W - Content filtering not working (?)

    Hello, I bought a router model RV200W fw 1.0.1.0... nice toy.
    It all works very well with the exception of content filtering. The rule only works if connections are made with the HTTP protocol, but if the user connects with HTTPS, then the rule is not considered... (???)
    f.e.:
    http://facebook.com (content filtered)
    https://facebook.com (content NOT filtered)...
    What the hell ! where I'm wrong ?
    Does anyone is experiencing the same ?

    Yes, the correct title was "URL FILTERING NOT WORKING"...thanks abudef000
    I do not want be polemical, but I do not understand where I went wrong.
    Before I buy I looked @
    http://www.cisco.com/en/US/prod/collateral/routers/ps9923/ps11025/data_sheet_c78-630461.html
    Check it out.
    Could you assume that HTTPS URLs are not in the sentence "Static URL blocking, keyword blocking, approved URL" as stated in the product sheet ?

  • Serial Number for CS5.5 Production Premium that I received for Mac download not working for Windows

    My ProductionPremium CS5.5 serial number for my Mac is not working when I download and install ProductionPremium CS5.5 on my windows machine. Do I need to deinstall on my mac or get another serial number issued?

    This is expected. Serial numbers are platform specific and platform swaps only apply to current versions. You need to upgrade to CS6 and make the switch.
    Mylenium

  • When Export ssrs Report to CSV file runtime filters not working

    The Runtime Filters not working when Export SSRS Report to CSV format

    Hi PatilPriti,
    As for my understanding, the filter worked fine when you preview the report,
    but it did not work when you export the report to CSV format. I tried to export the report to CSV file on my side, and the data was shown as expected. I guess the issue is due to the parameter or filter. please try to export to Excel format to test again
    and make sure you created the filter correctly. Please refer to the following
    blog about how to add a filter in SSRS:
    http://arcanecode.com/2010/07/12/adding-filter-parameters-to-sql-server-2008-reporting-services-reports/
    If the problem is not resolved, i would appreciate it if you could give us
    detailed description of your problem.
    It’s better to provide the table structure and some sample data, it will help us move more quickly toward a solution.
    Thanks, 
    Wendy Fu

  • Lion - 2004 MS Office for Mac will not work

    My 2004 version of Microsoft Office for Mac will not work in Lion. I suspect because this is a PowerPC application. My question is this:
    Is there any program out there which will map the PowerPC to an Intel format? Other than trying to seel more products, I am surprised that Apple does not supply a mapping program for products made by Microsoft for the Apple devices.

    Eric, can you tell me where please? It's not mentioned on the Lion compatibility pages at all. (http://www.apple.com/uk/macosx/what-is/compatibility.html) nor on the 'how to upgrade' page (http://www.apple.com/uk/macosx/how-to-buy/)

  • TS1381 My "t" button on my MAC is not working.. what should i do?

    My "t" button on my MAC is not working.. what should i do?

    I think you'll have to replace the KB...
    http://www.google.com/search?client=safari&rls=en&q=ifixit+macbook+keyboard&ie=U TF-8&oe=UTF-8

  • HT204032 Why find my Mac does not work in powernap?

    FInd my Mac does not work in powernap mode even though I enabled it energy preferences to work while on battery power.
    ANy ideas?

    "I think Find My Mac is not one of the features claimed to work in Power Nap."
    Yes it is.
    Please see the link at top of this page.
    "Find My Mac. Locate a lost Mac notebook even when it’s sleeping."

  • Airport Express WiFi network MAC address filtering not working

    I have an Airport Express WiFi network which I bought and installed new in 2011. Initially I enabled MAC address access control and populated a list. It was working perfectly, I know, because a niece visiting tried to connect her iPhone and could not until  I added its MAC address to the allowed list. Now however, anyone can connect without being added to the list. I think I read somewhere that a recent firmware update permanently disabled MAC filtering in Airport Express, even when it was previously working? Can anyone enlighten me about what's going on here?

    In a sense those are/were/should operate as two separate functions, which they did before recently.
    They do operate as two separate functions.....but it all depends on how you have the default rule setup in Timed Access.
    If the default rule in Timed Access is set to No Access.......then a wireless device cannot connect....even it has the password for the network.....unless it has been setup on the list of allowed devices in Timed Access.
    I have checked this 3 times this evening to verify. It works as it always has, and as expected.
    If the default rule in Timed Access is set to Unlimited, then any device can connect to the network if it has the password. Devices that are listed or specified in Timed Access will be allowed to connect at the specific times that have been set up for each device.
    So, if you want to use the more traditional MAC Access Control settings, the default rule has to be set to No Access and then you must set up a rule for each device that you want to allow to connect to the network. Only devices on the Timed Access list will be allowed to connect to the network. Other devices will not be able to connect to the network....even if they have the correct password.
    If a recent firmware update has changed things from what they have always been.....then I am not affected....and I should be if I am using the same firmware as others.

  • Bridge on Mac deleting/rejecting/filtering not working!?! HELP

    Ok seems as if I am having a problem only windows users have run into in earlier versions of CS.  I was using CS5 on my PC and for many reasons I had to dump the dead weight of the PC world and move to a Mac... FINALLY! But that also ment purchasing a new CS5 for Mac.  I thought this would be flawless... CS5 to CS5. WRONG. I store my photos on a 2TB external, same one i used on my PC. Now, I can not do any sort of "editing" of image info like "delete, "reject", "star" or anyother rating within bridge. It does not work with key commandes or from the menu.  After researching this issue for two days it seems as if this issuse has been reserved for PC users and earlier versions being upgraded to newer ones.  This is not the case for me.  They said to "use as Administrator" I am the adminsitrator, and have made sure the permisissions have been set to read and write. That has not made a difference.  Others have said that there seems to be no solution. Things they have tried include:
    ~Uninstall/reinstall of CS
    ~administrator settings
    ~setting it to open automatically at start up
    ~deleting pictures and reloading them through the new software version (this also seems to be an issue reserved for photos that have already been uploaded, I do not know if this will change with new images loaded through the new version as I have not had a chance to try it, since I'm trying to resolve this first)
    I need to have access to my previously loaded files and this is a huge hiccup!
    PS I can open the files to Photoshop, and edit, and the changes seem to stick, its just any organization, deleting, staring etc actually in bridge DONT stick. another issue that the PC users seem to have is error messages and pop-up windows when tring to exicute these tasks. I have no error messages.
    PLEASE HELP! thx

    I am read only on both of my externals! when i tried to find a way to set permissions, it says that I should be able to find a "lock" once I have gone to "get info" there is no "lock" so that I may enter my password and change permissions.
    First thing that comes to my mind is that you have used the same external disks as you did for Windows. And that you did not reformatted them for a Mac using MacOS Extended (Journaled) formatting.
    Without knowing your situation I assume you have a back up disk with the same content as your problem disk. If not it might be wise to buy a new back Up disk. There is one thing sure about disks, they all have an end date, some sooner most later but they all die and often at a moment you did not expect it nor could use it...
    Make sure you have a proper back up and the reformat the disk (or the new disk) using Mac Disk Utillity
    Personally I always use the safety option to overwrite the disk once with Zeros but that takes a bit longer.
    Give it a proper name and use the default format as mentioned above. Copy the content back to the new formatted disk and try again
    If in doubt try another older disk or buy a cheap one for testing if this method is working for you.

  • [SOLVED] cat6500 vlan filtering not working

    Hello!
    I have cat 6500 with SUP32-GE-3B/MSFC2A/PFC3B, s3223-adventerprisek9-mz.122-33.SXJ6.bin,
    and WS-X6148-GE-TX module.
    And I have a couple of 3750G.
    On all of 3750G there is a broadcast filtering of VLAN 4000, and it's working:
    mac access-list extended badhosts
      permit any host ffff.ffff.ffff
    vlan access-map dropbad 10
      action drop
      match mac address badhosts
    vlan access-map dropbad 20
      action forward
    vlan filter dropbad vlan-list 4000
    Then i copy this config to 6500, and it's not working.  I configured two ports, one is switchport access vlan 4000 and other is switchport capture allowed vlan 4000, and i see on both ports same broadcast traffic. Filter is working, but packets are not dropping. I've tried to find something in manual, but found only about platform cwan acl software-switched, enabled it, nothing changed.
    cat6500# sh vlan filter
    VLAN Map dropbad:
            Configured on VLANs:  4000
                Active on VLANs:  4000

    i think i solve the problem: to make vlan filtering to work on 6500, i've added:
    # conf t
    (config)# int vlan 4000
    (config-if)# no shut
    (config-if)# mac packet-classify
    Now, how to mark this question answered?

  • Taking Z1 back to shops!! going back to Apple: Sony Bridge for Mac does not work

    Been an Iphone owner. really, really wanted to try a good  android phone, and the z1 looked the best. However
    I have had the most frustrating experience- this junky bridge software looks slick but it simply does not work on a mac .
    I have spent nearly a week mucking around on forums, reading technical 'get arounds' this is a £600 phone and its not good enough. It might be Apples fault for being so locked down, but sony should not claim it works when it has so many issues.
    1) it spent 3 days trying to load my media. It eventually got stuck on 10 min remaining. I pulled the cable.
    no contacts had even been added, however 1/2 the photos have, but they are a little jumbled up from when they were on my iphone.
    2) i try to download the lastest sony for Mac update 3 times- it cant even do this and gets stuck
    3) i then try to update the z1 with the latest software, again this also it gets stuck and hangs. OMG how can i update my software, do i have to buy a PC to go with the phone.
    im annoyed now and cant play with my new phone
    4) connect phone again and just ask it to do my notes, messages and contacts. This seems to work , but all the messages to my Girfriend are completley missing?? why?
    5) i try to load a few folders, the pictures on the bridge pop up window seem to freeze , ai cant even drag these across, the same happens with my music
    6) i have a lot of photos on my mac form my iphone 3000. If i choose to load them it only allows me to load all of them and not browse.
    can i avoid bridge and view my z1 as a drive? also why wont any of the software update?
    the next thing is it seems to have infected teh mac, the new version f itunes will not install correctly!! this is very unusual.
    some one please helpme before i rant in my blog!

    Hi Inventsc,
    I apologize for the late answer. I'm sorry you haven't had a pleasant experience using Bridge. We are aware of the problems you mention and are working on it. As mentioned, you can connect your phone in MSC (mass storage mode). To do this, disconnect the phone, find USB connectivity settings and set it to MSC mode before plugging it in again.
    Again, I am sorry it's not working properly for you.
    Best Regards,
    David

Maybe you are looking for