WAP321 not accepting firmware image

Hi all, in a building I have 2 cisco wap321, one with software v1.0.2.3 and the other with v1.0.0.3. I wanted to set up a cluster so I decided to upgrade both of them to the latest firmware v1.0.5.3. With the first one I didn't have any issue, but with the last one It seems to not accepting the firmware image, It loads the image and immediately return to "Firmware Upgrade" page as it nothing happened.
I've already tried:
v1.0.0.3 --> v1.0.1.10
v1.0.0.3 --> v1.0.2.3
v1.0.0.3 --> v1.0.5.3
Any Ideas?
Do you need more information?
Many thanks in advance!

Thnaks Saurav, but I've already followed that guide. Also I've tried different browsers.
Is the a way to do it by CLI? Any suggestions?
Many thanks in advance.
Regards,

Similar Messages

HP Laserjet P2015 will not accept firmware update

Hi,
A laserjet P2015n will not accept a firmware upgrade.
When attempting to upgrade, paper jam led flashes 3 times, pauses for 1 second , flashes 3 times.......led will repeat this pattern even after upgrade is supposed to have completed.
If I cycle the power, the printer returns to ready state but firmware is still at the older version.
User had been experiencing dificulties printing and firmware update might resolve the issues.
Does anyone know of a solution?

The product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
You can also look through the article pertaining to this printer for possible solutions:
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI...
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

WAP321 - not accepting WPA2 PSK longer than 32 characters?

I just got one of these and it works pretty good except I can't get it to take more than a 32 character WPA2 PSK. Tried using Firefox and IE and it doesn't make a difference. This is for my house. I'm retiring an old Cisco 1200 series AP and as well as a Cisco 1130. Using the same PSK and it doesn't work. Even if I just put 32 characters and just try typing more characters, it doesn't accept any more.
Running 1.0.0.3 code and don't see anything newer or any firmware for it for that matter.
Thanks!

Hi, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center. Thank you for using the Cisco Community Post Forums.
You may not have to change anything. When using the Password Complexity and WPA-PSK Complexity look at the Character Class
What number are you using?
1 means your password only has to contain upper or lower or numbers or special characters as the password – like 8646061866, or ciscotest or CISCOTEST
2 means contain at least two of the four - like cisco1234 or CISCO1234
3 means contains three of the four – like Cisco@@@@ or cisco12!!
4 means contain all four – Like C!5c0t35t
Thanks
Eric Moyers
Cisco Network Support Engineer
SBSC Wireless and Surveillance SME
CCNA, CCNA-Wireless
1-866-606-1866

Iphoto not accepting jpeg images saved using Preview "save as"

I have a number of tiff images on my desktop. Am trying to save them as jpeg images directly into iPhoto using the Preview "save as" function. When I do this, I can find no image in iPhoto. When I "save as" jpeg to my desktop, the jpeg image appears there and I can drag to iPhoto, but this is laborious compared with saving directly. Can anyone help me with this?

TD, thanks for commenting on this, and I think I see your point--I used the wrong term when I wrote "import". However, in Preview there is what I see to be a "save as jpeg to iPhoto" option. Why is this available if it does not work? Or to take it from another angle--what can you do with this option? In the end, I guess my basic question is: Is there a more direct way to get tiff images into iPhoto from the desktop than saving them first to the desktop as jpeg? Apologies for piling question on question.

Photoshop not accepting GIF image?!

I have a GIF image of 600x367 px & 56.5 KB. I created a new Photoshop project of size 450x450 px, opened my GIF image & tried to drag & drop the image to my new project using the move tool (this is the process I have done in the past with success), but the image is not going into the project?
Please anyone advice me what's wrong here & how can I edit my GIF image.
(I am using PS CS3 on Windows Vista)

Just open the GIF image in Photoshop and edit it as required.

Can't install 9/23/2005 updater-no firmware image? ARGH!!!!

So the story begins...we've supposedly installed the ITunes 5.whatever update. Husband tells me he can no longer put purchased music on IPod, because it's out of date. So I open the IPod Update 9-23-5005 and (I think) install it on the hard drive. Now, I am trying to open it from my utilities folder to complete the update to the Ipod, and it says, "Updater does not have firmware image."
ARGH!!!!!!!
What am I supposed to do? Husband is irate and I want to fix this! Are there bugs in the system? Is it me? Can someone help?

Niel
- Tried this and it does not work. Same issue - will not load new songs to my iPod, and cannot get the suggested updater to run.
SOLUTION FOR ME:
After loading ITunes 5.0.1, and then connecting my iPod all of my purchased music was erased.
Got the following message:
"Some of the songs in the iTunes music library were not copied to the iPod "Mcwop's iPod" because your iPod software is too old. Go to www.apple.com/ipod to get the latest software update."
Tried running the 9-23-05 update, and got this message:
"The updater does not have a firmware image."
Instead of running the 9-23-05 updater, I went to Applications>Utilities>iPod Updater, and ran the 6-26-05 update. That brought my iPod software to version 2.3, and all of my purchased AAC songs then loaded back to my iPod.

My MacBook pro did a firmware update now will not accept my password

My Skype account was hacked so I changed the password for my computer too I did a firmware update the computer started up and went to a black screen asking for my password it does not accept the new or old passwords. I have tried resetting the password with the snow leopard install disc but it will not recognise it and ejects. Please help

Try image capture (in your applications folder) - or the finder - if neither of these see the card uyou need to try a USB card reader - once you get yoru photos off use the camera format command to erase and reformat the card
a best practice to is to never have any computer program (including iPhoto) delete the photos from the card but to import the photos and keep them and then after at least one successful backup cycle has completed and then reformat the card -- I use three very large (32 GB) cards in rotation so I do not reformat for typically a year or more giving me one more long term backup of my photos
LN

"The updater does not have a firmware image"

My initial problem was that I suddenly could not copy purchased music from iTunes to my iPod. I tried the suggestion of downloading the iPod Updater. The Updater did indicate that my iPod software, 2.2, "needs update". Upon attempting to install the Updater (by clicking 'Update'), I received the following message: "The Updater does not have a firmware image." I notice that SEVERAL people are having the same problem at this very moment on this message board. I hope someone from Apple notices this fiasco and does something to fix it. Please help. Restoring my iPod is not an option for me. Thanks.

Yes, I've had this problem too. And the iPod has not been updated with any of the tracks I bought since updating to iTunes 5, but iTunes REloaded all the older tracks onto my iPod. Why? Seeing as the upgrade to iTunes 5 was a bit traumatic in itself, I'm not altogether surprised to discover the newer tracks had not been copied: there is obviously some incompatability here somewhere - but goodness knows where.

This is about iPhoto: I need to print the FULL IMAGE as shown on the screen: the image is SQUARE (equal on four sides). iPhoto keeps cropping it into a rectangle - THIS IS NOT ACCEPTABLE! How do I get what I see on the screen in print form???

I need to print the FULL image as shown on the screen - the image is SQUARE (equal on all four sides). iPhoto keeps cropping it into a rectangle - this is not acceptable! How do I get what I see on the screen into print form?

Like Terence explained:
OT

My IPhone is set up with an internet downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro within the phone. My computer will not accept the phone because they say it's a "Developer?"

My IPhone is set up with an internet downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro within the phone. My computer will not accept the phone because they say it's a "Developer?" Help. I cannot not even get passed the activation step on the computer or phone because it will not activate the device.

Hello buddyacw
You would have to restore the iPhone. Download the latest version of iTunes and then follow the steps in the article below to get it working again.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for using Apple Support Communities.
Regards,
-Norm G.

HELP! Can Not Accept Images from Mac to Windows - ...

Last week I updated my Skype to Apple Mac Version 7.2 (412) (latest Version) and all of a sudden a few of my employees could not accept image files from me. Its telling them "the photo is unavailable"
Ive used Skype with them for 7 years and this is the first time we had any issues like this.
Now, I know this is usually related to the updates not being current for all users but this not the case, 2 out of 5 of my employees (Using Windows) can not reaceive any photos from me but they are running the latest version of Skype which is 6.22.59.107 (Windows) The other emplyees of mine are also running the latest version of Skype for Windows anf they are able to recieve files from me with no problems.
This problem only started when I updated last week.
Is this a Bug? Any work arounds? Anything.....
SEE ATTACHED SCREEN SHOT.
Attachments:
error.PNG ‏21 KB

Can you please double check with your contact on Windows 8 that they are using Skype 7.0 for Windows and not Skype 3.1 for modern Windows. The latter is not supporting the new modern photo transfer method. you can share this link for the Skype for Windows desktop client: http://www.skype.com/en/download-skype/skype-for-computer/
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Elements 9 does not accept or process RAW photo images taken with a Nikon D7000.

Adobe elements 9 does not accept or process RAW photo images taken with a Nikon D7000. I called support for a download patch and they said I had to purchase a support package or essentially purchase Elements 10. I can't believe that Adobe would not have a download patch for this problem as my elements 9 is not very old. When I try to do the updates Adobe says the serial number of the elements 9 is not accepted for download or support even though I purchased it and registered it with Adobe.
Is there any solution to this?
Thanks.

Thank you but still having a problem. I go to the edit menu>>help>>update>>check for updates and an update to 9.03 comes up as the only update, no camera raw update. It starts to download and then stops and says to close organizer and/or editor then starts back up and stops again saying "error installing this update. Close and contact customer support". When I called customer support earlier that's when they said they don't support 9 only v. 10 and did I want to buy support or a new program v10 to get camera raw processing for the Nikon D7000 RAW. Apparently I'm doing something wrong in the update procedure but don't know what. The camera raw version is 6.5 in my elements and understand that camera raw v. 6.7 is the update to process the images. Any ideas? If I uninstall and reinstall does the serial number still work on the reinstall?
Thanks for help.

Can not connect to Image Browser

Can not connect to Image Browser. Try to open again but no results.

Hi garyrandall,
I'm sorry to hear of the difficulty you've encountered with the transfer of images from your Canon camera.
Please reply with the Camera model you're using and the operating system on your computer.
Please include any error messages you receive.
We look forward to hearing from you!
Richard
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Can't mount external HDD? "usb 1-1: Device not accepting address"

I just bought a Medion HDDRIVE2GO (Full Speed) from Aldi, and at first when I plugged it in, everything went fine (well, I thought so). Appearently it had some errors with HAL not being able to read the HDD (error name="(unset)").
I gave it a reboot, and now it does not work at all! In dmesg, I have this output (the bottom is the most important I guess)
[dell@linuxnas ~]$ dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffe2800 (usable)
BIOS-e820: 000000001ffe2800 - 0000000020000000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
DMI 2.3 present.
last_pfn = 0x1ffe2 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FE0000000 write-back
1 base 0FEDA0000 mask FFFFE0000 write-combining
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 0000000000100000 - 000000001ffe2800 (usable)
modified: 000000001ffe2800 - 0000000020000000 (reserved)
modified: 00000000feda0000 - 00000000fee00000 (reserved)
modified: 00000000ffb80000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-000000001ffe2000
0000000000 - 0000400000 page 4k
0000400000 - 001fc00000 page 2M
001fc00000 - 001ffe2000 page 4k
kernel direct mapping tables up to 1ffe2000 @ 15000-1a000
RAMDISK: 1fe3b000 - 1ffd2770
ACPI: RSDP 000fde50 00014 (v00 DELL )
ACPI: RSDT 000fde64 00028 (v01 DELL CPi R 27D4010C ASL 00000061)
ACPI: FACP 000fde90 00074 (v01 DELL CPi R 27D4010C ASL 00000061)
ACPI: DSDT fffe4000 0319C (v01 INT430 SYSFexxx 00001001 MSFT 0100000E)
ACPI: FACS 1ffff800 00040
0MB HIGHMEM available.
511MB LOWMEM available.
mapped low ram: 0 - 1ffe2000
low ram: 0 - 1ffe2000
node 0 low ram: 00000000 - 1ffe2000
node 0 bootmap 00016000 - 0001a000
(10 early reservations) ==> bootmem [0000000000 - 001ffe2000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0001000000 - 0001550444] TEXT DATA BSS ==> [0001000000 - 0001550444]
#3 [001fe3b000 - 001ffd2770] RAMDISK ==> [001fe3b000 - 001ffd2770]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0001551000 - 0001557198] BRK ==> [0001551000 - 0001557198]
#6 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000]
#7 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000]
#8 [0000015000 - 0000016000] PGTABLE ==> [0000015000 - 0000016000]
#9 [0000016000 - 000001a000] BOOTMAP ==> [0000016000 - 000001a000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x0001ffe2
HighMem 0x0001ffe2 -> 0x0001ffe2
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x00000002
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0001ffe2
On node 0 totalpages: 130931
free_area_init_node: node 0, pgdat c13f9880, node_mem_map c1559000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3953 pages, LIFO batch:0
Normal zone: 992 pages used for memmap
Normal zone: 125954 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- you can enable it with "lapic"
APIC: disable apic facility
APIC: switched to apic NOOP
nr_irqs_gsi: 16
PM: Registered nosave memory: 0000000000002000 - 0000000000010000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at 20000000 (gap: 20000000:deda0000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c1c00000 s34776 r0 d22568 u4194304
pcpu-alloc: s34776 r0 d22568 u4194304 alloc=1*4194304
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129907
Kernel command line: root=/dev/disk/by-uuid/5501fa6d-1664-41e3-ac30-9a475cc6843d ro vga=773
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 2620840 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00000000:00000000)
Memory: 509220k/524168k available (2895k kernel code, 14260k reserved, 1208k data, 408k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe07e2000 - 0xff7fe000 ( 496 MB)
lowmem : 0xc0000000 - 0xdffe2000 ( 511 MB)
.init : 0xc1403000 - 0xc1469000 ( 408 kB)
.data : 0xc12d3f1e - 0xc14022e0 (1208 kB)
.text : 0xc1000000 - 0xc12d3f1e (2895 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 1993.528 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3988.18 BogoMIPS (lpj=6645093)
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU0: Hyper-Threading is disabled
mce: CPU supports 4 MCE banks
Performance Events: no PMU driver, software events only.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
ACPI: Core revision 20091214
ACPI: setting ELCR to 0200 (from 0800)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (3988.18 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: Power Resource [PADA] (on)
ACPI: ACPI Dock Station Driver: 1 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xfed9ffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xfee00000-0xffb7ffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xffc00000-0xfff7ffff] (ignored)
pci 0000:00:00.0: reg 10: [mem 0xe8000000-0xebffffff pref]
pci 0000:00:1d.0: reg 20: [io 0xbf80-0xbf9f]
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7]
pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177]
pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377]
pci 0000:00:1f.1: reg 20: [io 0xbfa0-0xbfaf]
pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
pci 0000:00:1f.5: reg 10: [io 0xd800-0xd8ff]
pci 0000:00:1f.5: reg 14: [io 0xdc80-0xdcbf]
pci 0000:00:1f.6: reg 10: [io 0xd400-0xd4ff]
pci 0000:00:1f.6: reg 14: [io 0xdc00-0xdc7f]
pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe7ffffff pref]
pci 0000:01:00.0: reg 14: [io 0xc000-0xc0ff]
pci 0000:01:00.0: reg 18: [mem 0xfcff0000-0xfcffffff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfdffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe7ffffff pref]
pci 0000:02:00.0: reg 10: [io 0xec80-0xecff]
pci 0000:02:00.0: reg 14: [mem 0xf8fffc00-0xf8fffc7f]
pci 0000:02:00.0: reg 30: [mem 0xf9000000-0xf901ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:01.0: reg 10: [mem 0x00000000-0x00000fff]
pci 0000:02:01.0: supports D1 D2
pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.0: PME# disabled
pci 0000:02:01.1: reg 10: [mem 0x00000000-0x00000fff]
pci 0000:02:01.1: supports D1 D2
pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.1: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 02-10] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xffff]
pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xfbffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:02: disabling [io 0x0800-0x0805] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:02: disabling [io 0x0808-0x080f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:03: disabling [io 0x0806-0x0807] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:03: disabling [io 0x0810-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:03: disabling [io 0x0860-0x087f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:04: disabling [io 0xf000-0xf0fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf100-0xf1fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf200-0xf2fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf400-0xf4fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf500-0xf5fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf600-0xf6fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf800-0xf8fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf900-0xf9fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xfa00-0xfafe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xfc00-0xfcfe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xfd00-0xfdfe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xfe00-0xfefe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [mem 0xfa000000-0xfbffffff] because it overlaps 0000:00:1e.0 BAR 14 [mem 0xf4000000-0xfbffffff]
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0x1ffeffff] could not be reserved
system 00:00: [mem 0x1fff0000-0x1fffffff] has been reserved
system 00:00: [mem 0xfeda0000-0xfedfffff] has been reserved
system 00:00: [mem 0xfff80000-0xffffffff] has been reserved
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x0880-0x08bf] has been reserved
system 00:03: [io 0x08c0-0x08df] has been reserved
system 00:03: [io 0x08e0-0x08ff] has been reserved
system 00:09: [io 0x0900-0x091f] has been reserved
system 00:09: [io 0x03f0-0x03f1] has been reserved
system 00:0f: [io 0xbf40-0xbf5f] has been reserved
system 00:0f: [io 0xbf20-0xbf3f] has been reserved
system 00:10: [mem 0xfebffc00-0xfebfffff] has been reserved
pci 0000:00:1e.0: BAR 15: assigned [mem 0x20000000-0x27ffffff pref]
pci 0000:00:1f.1: BAR 5: assigned [mem 0x28000000-0x280003ff]
pci 0000:00:1f.1: BAR 5: set to [mem 0x28000000-0x280003ff] (PCI address [0x28000000-0x280003ff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfdffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe7ffffff pref]
pci 0000:02:01.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
pci 0000:02:01.0: BAR 16: assigned [mem 0xf4000000-0xf7ffffff]
pci 0000:02:01.1: BAR 15: assigned [mem 0x24000000-0x27ffffff pref]
pci 0000:02:01.1: BAR 16: assigned [mem 0x2c000000-0x2fffffff]
pci 0000:02:01.0: BAR 0: assigned [mem 0xf8000000-0xf8000fff]
pci 0000:02:01.0: BAR 0: set to [mem 0xf8000000-0xf8000fff] (PCI address [0xf8000000-0xf8000fff]
pci 0000:02:01.1: BAR 0: assigned [mem 0xf8001000-0xf8001fff]
pci 0000:02:01.1: BAR 0: set to [mem 0xf8001000-0xf8001fff] (PCI address [0xf8001000-0xf8001fff]
pci 0000:02:01.0: BAR 13: assigned [io 0xe000-0xe0ff]
pci 0000:02:01.0: BAR 14: assigned [io 0xe400-0xe4ff]
pci 0000:02:01.1: BAR 13: assigned [io 0xe800-0xe8ff]
pci 0000:02:01.1: BAR 14: assigned [io 0xf000-0xf0ff]
pci 0000:02:01.0: CardBus bridge to [bus 03-06]
pci 0000:02:01.0: bridge window [io 0xe000-0xe0ff]
pci 0000:02:01.0: bridge window [io 0xe400-0xe4ff]
pci 0000:02:01.0: bridge window [mem 0x20000000-0x23ffffff pref]
pci 0000:02:01.0: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:02:01.1: CardBus bridge to [bus 07-0a]
pci 0000:02:01.1: bridge window [io 0xe800-0xe8ff]
pci 0000:02:01.1: bridge window [io 0xf000-0xf0ff]
pci 0000:02:01.1: bridge window [mem 0x24000000-0x27ffffff pref]
pci 0000:02:01.1: bridge window [mem 0x2c000000-0x2fffffff]
pci 0000:00:1e.0: PCI bridge to [bus 02-10]
pci 0000:00:1e.0: bridge window [io 0xe000-0xffff]
pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xfbffffff]
pci 0000:00:1e.0: bridge window [mem 0x20000000-0x27ffffff pref]
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:02:01.0: enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:02:01.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
pci 0000:02:01.1: enabling device (0000 -> 0003)
pci 0000:02:01.1: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfdffffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe7ffffff pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xffff]
pci_bus 0000:02: resource 1 [mem 0xf4000000-0xfbffffff]
pci_bus 0000:02: resource 2 [mem 0x20000000-0x27ffffff pref]
pci_bus 0000:02: resource 3 [io 0x0000-0xffff]
pci_bus 0000:02: resource 4 [mem 0x00000000-0xffffffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xe0ff]
pci_bus 0000:03: resource 1 [io 0xe400-0xe4ff]
pci_bus 0000:03: resource 2 [mem 0x20000000-0x23ffffff pref]
pci_bus 0000:03: resource 3 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:07: resource 0 [io 0xe800-0xe8ff]
pci_bus 0000:07: resource 1 [io 0xf000-0xf0ff]
pci_bus 0000:07: resource 2 [mem 0x24000000-0x27ffffff pref]
pci_bus 0000:07: resource 3 [mem 0x2c000000-0x2fffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1629k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1274299821.609:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 998
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xe0000000, mapped to 0xe0800000, using 1536k, total 32768k
vesafb: mode is 1024x768x8, linelength=1024, pages=41
vesafb: protected mode interface info at c000:549f
vesafb: pmi: set display start = c00c5533, set palette = c00c557f
vesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 c004 c0b0 c0b2 c0b4
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
serial 0000:00:1f.6: PCI INT B disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 408k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Floppy drive(s): fd0 is 1.44M
SCSI subsystem initialized
FDC 0 is a post-1991 82077
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
ata2.01: NODEV after polling detection
ata1.00: ATA-6: HTS548040M9AT00, MG2OA5EA, max UDMA/100
ata1.00: 78140160 sectors, multi 8: LBA48
ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8081N, 0108, max MWDMA2
ata2.00: configured for MWDMA2
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA HTS548040M9AT00 MG2O PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8081N 0108 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sda1 sda2 sda3 sda4
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda3): mounted filesystem with ordered data mode
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
udev: starting version 151
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
intel_rng: FWH not detected
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux agpgart interface v0.103
Marking TSC unstable due to TSC halts in idle
input: PC Speaker as /devices/platform/pcspkr/input/input2
ACPI: AC Adapter [AC] (on-line)
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
ACPI: Sleep Button [SBTN]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Switching to clocksource acpi_pm
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
parport_pc 00:0e: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
iTCO_vendor_support: vendor-support=0
agpgart-intel 0000:00:00.0: Intel 845G Chipset
lp: driver loaded but no devices found
lp0: using parport0 (interrupt-driven).
agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
ppdev: user-space parallel port driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (57 C)
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x9b4cb1, caps: 0x884793/0x0
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:012a]
yenta_cardbus 0000:02:01.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:02:01.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:01.0: TI: mfunc 0x01261222, devctl 0x64
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:15/LNXVIDEO:00/input/input7
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0418, PCI irq 11
yenta_cardbus 0000:02:01.0: Socket status: 30000006
yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xe000-0xffff: clean.
yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
3c59x 0000:02:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
3c59x: Donald Becker and others.
0000:02:00.0: 3Com PCI 3c905C Tornado at e0c6ac00.
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
Intel ICH 0000:00:1f.5: setting latency timer to 64
yenta_cardbus 0000:02:01.1: CardBus bridge found [1028:012a]
yenta_cardbus 0000:02:01.1: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:02:01.1: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:01.1: TI: mfunc 0x01261222, devctl 0x64
usb 1-1: new full speed USB device using uhci_hcd and address 2
[drm] Initialized drm 1.1.0 20060810
yenta_cardbus 0000:02:01.1: ISA IRQ mask 0x0418, PCI irq 11
yenta_cardbus 0000:02:01.1: Socket status: 30000006
yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xe000-0xffff: clean.
yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff
usb 1-1: device descriptor read/64, error -71
usb 1-1: device descriptor read/64, error -71
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] radeon: Initializing kernel modesetting.
[drm] register mmio base: 0xFCFF0000
[drm] register mmio size: 65536
[drm] GPU reset succeed (RBBM_STATUS=0x00000140)
agpgart-intel 0000:00:00.0: AGP 2.0 bridge
agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[drm] radeon: VRAM 64M
[drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF
[drm] radeon: GTT 64M
[drm] radeon: GTT from 0xE8000000 to 0xEBFFFFFF
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=64M, BAR=128M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 255756 kiB.
[drm] radeon: 32M of VRAM memory ready
[drm] radeon: 64M of GTT memory ready.
[drm] radeon: cp idle (0x00008383)
[drm] Loading R100 Microcode
platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
usb 1-1: new full speed USB device using uhci_hcd and address 3
clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[drm] radeon: ring at 0x00000000E8000000
[drm] ring test succeeded in 1 usecs
intel8x0_measure_ac97_clock: measured 52675 usecs (2532 samples)
intel8x0: clocking to 48000
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Panel ID String: QDI141X1LH03
[drm] Panel Size 1024x768
[drm] Default TV standard: NTSC
[drm] 27.000000000 MHz TV ref clk
[drm] No TV DAC info found in BIOS
[drm] Default TV standard: NTSC
[drm] 27.000000000 MHz TV ref clk
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] LVDS
[drm] Encoders:
[drm] LCD1: INTERNAL_LVDS
[drm] Connector 2:
[drm] S-video
[drm] Encoders:
[drm] TV1: INTERNAL_DAC2
usb 1-1: device descriptor read/64, error -71
[drm] fb mappable at 0xE0040000
[drm] vram apper at 0xE0000000
[drm] size 786432
[drm] fb depth is 8
[drm] pitch is 1024
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
Console: switching to colour frame buffer device 128x48
fb0: radeondrmfb frame buffer device
registered panic notifier
[drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
usb 1-1: device descriptor read/64, error -71
usb 1-1: new full speed USB device using uhci_hcd and address 4
usb 1-1: device not accepting address 4, error -71
EXT4-fs (sda4): mounted filesystem with ordered data mode
usb 1-1: new full speed USB device using uhci_hcd and address 5
Adding 265064k swap on /dev/sda2. Priority:-1 extents:1 across:265064k
psmouse serio2: ID: 10 00 64
usb 1-1: device not accepting address 5, error -71
hub 1-0:1.0: unable to enumerate USB device on port 1
eth0: setting full-duplex.
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/serio2/input/input8
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
lspci (Is this useable info?)
[dell@linuxnas ~]$ lspci
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
02:00.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
02:01.0 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
02:01.1 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller

I found this post on linux forums which say It's a HAL related problem.
"rmmod ehci_hcd" made it work for some of these guys Which one of them explains It's a data speed issue. Cables.., 2.0 1.0, that sort of things. Read it, I bet you'll get more out of it, It's old though.
Try removing the module, plugging the drive, check dmesg, and mount manually.
Last edited by Ekimino (2010-05-20 01:23:54)

Hard Drive password not accepted in new W530

I am moving a hard drive from a W500 to a W530 laptop. The hard drive has a password on it and it works fine on the W500. When I put the drive in the W530 laptop, it does not accept the password on boot up. If I move the drive back to the W500, it all works fine. This is a 1TB drive, so I'm hoping I can still use it! Thanks for any help here.

Good afternoon and welcome to the community.
Since the HDD password is accepted when it's installed in the W500, why not pull off the password in BIOS there, reinstall the drive into the W530 and then set the password in the W530's BIOS?
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

WAP321 not accepting firmware image

Similar Messages

Maybe you are looking for