refer
http://www.cisco.com/c/dam/en/us/td/docs/wireless/access_point/csbap/wap121/administration/guide/WAP121_321_AG_en.pdf

Similar Messages

HT4623 my voice call services is not working with cellular network...only works fine with wifi..please help?

my voice call services is not working with cellular network...only works fine with wifi..please help?

Since you have already done some sort of reset on your Airport Express, you might as well make sure it was a "hard reset" - follow the instructions for a hard reset found at:
http://docs.info.apple.com/article.html?artnum=108044
Since your Mac is running Leopard, you need to configure the Airport Express using the Airport Utility found in the Applictions->Utilities folder. You cannot install the old software that was supplied on the CD you got with the Airport Express.
In future - if you do something bad with network settings on your Mac, do NOT try to fix it with the Airport Utility. The Airport Utility is only used to configure the Airport Express - and since the problem you have created is on the Mac and not the Airport Express, there is no need to be using the Airport Utility and especially there is no need to be resetting the Airport Express.

Not working proper cellular network work only wifi

I Have iPhone 5 my phone not working proper cellular network work only wifi connection we are try will everything but not solve my problem

maheshpl80 wrote:
we are try will everything but not solve my problem
What all of "Everything" have you tried????

Some attachment buttons not working from external networks

Hi guys,
We have an eSourcing system that we access internally from server.internal.com . We also make this eSourcing system available to external vendors through www.external.com .
The external access is done using a Citrix AGEE system (reverse proxy, etc.). As part of this, the AGEE has the ability to change the hostname in the URL so the real server is hidden from external vendors. For example, when eSourcing generates a webpage, the AGEE searches through and replaces all http://server.internal.com references to http://www.external.com , and vice-versa for incoming calls.
This works for about 95% of the content, but there are a fer places where the links are not re-written correctly. One example is the File Attachment buttons when replying to a question. However, other file attachment buttons work correctly.
1. Does anyone else have a similar situation, using a Citrix or other product for external vendors?
2. Does anyone have a similar problem where certain links/buttons are not working from external networks?
3. Does anyone have any suggestions as to how to fix this problem?
4. Are there any settings that are specific to external access that may need to be set?
Thanks guys for any help/insight.
Michael.

SAP has re-written some of their code to help rectify the problem. We have also been working with Citrix to provide additional fixes. If anyone else has these problems, apply the latest patch of eSourcing and contact Citrix support to get the AGEE changes needed to make it work.
Michael

Network does not work or the network signal attenuates rapidly

Network does not work or the network signal attenuates rapidly

Hello shishir_teamo,
If you are having issues with Wi-Fi on you iPhone 4S, check the following article that will help troubleshoot the issue.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I have some problem .i update my iphone3gs software .software downloaded now its not working .warning select network connect to itunes ..please help me

I have some problem .i update my iphone3gs software .software downloaded now its not working .warning select network connect to itunes ..please help me

please help me ?

Microsoft Exchange ActiveSync not working in Mobile Network – Blackberry Z10

Microsoft Exchange ActiveSync not working in Mobile Network – Blackberry Z10
I have set-up office email account in Microsoft Exchange ActiveSync this work only over office Wi-Fi not working outside of office Wi-Fi range. When I back to office all new e-mail loaded automatically. I have no problem with yahoo email setup in the same Z10 hand set work in both Wi-Fi and Mobile network. I have data plan with my carrier. Both emails were working in my previous Blackberry hand set Bold 9900. But with this New Z10 this become a problem
What could a the problem and I need help please

The URL you provided https://... does require SSL as it has a "s".
Have you tested the server OMA setup with a notebook or desktop (https://webmail.domain.com/OMA)?
You should receive a login prompt for username & password following by an Inbox listing of messages.
We used this step to verify server setup before configuring an iPhone. Lastly, we made certain that connectivity would work from outside or within our company by doing the following:
1) created A record for webmail.domain.com to a public IP that route through the firewall on 443 to the Exchange server's private IP - this handles external traffice
2) added an internal DNS record for webmail.domain.com to the private IP of the Exchange server.
This ensures that webmail.domain.com sync's to exchange from outside or from within the Enterprise.

BBM not working over mobile network

BBM on Q10 not working over mobile network.
Working only via wifi.
Carrier: KSA STC
OS: Official 10.2.1.2102
Please help.
Its very disappointing that bbm is not working on bb.

Can you try sending a BBM friend a PIN message, not in BBM, but in your Compose Message > PIN.
You will need that contact's BBM PIN number...
Do you see the message sent, and does it hae a D beside or R afterwards?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Wireless only working with guest network?

I've just about gotten a new TC working, but strangely it the wireless only seems to work on the guest network. Have checked the password, and its correct, but still no joy.
I didn't think it was that big a deal, but now I'm wondering if its stopping me seeing old backups when going in to TM, as when I do it only shows me the current situation, and no backups. Which kinda makes sense, as I guess the whole idea of logging in as a guest is that you don't have access to files.
Also - when on the guest network, the TC doesn't show up in AU, presumably for the same reason.
Any ideas what's going on here, assuming the password is correct for the non guest network?
Thanks.

How about a "new" wrinkle: I can only acquire TC/Airport on the Guest Network, with both a new Mac Book Pro and recent iMac desktop. Plus, Airport Utility will not recognize any wireless device in the house (such as the TC!) Thus, I cannot access any manual settings. Advice or fixes?
Also experiencing slow or limited buffer rates while watching You Tube, etc... Colleague suggested resetting the unit (unplugging router and power and putting laptop in close proximity to TC), and, for an instant, Airport Utility did recognize TC long enough for me to manually set to another channel to avoid interference.
New TC purchased at Best Buy (had coupons!). Time Machine side works fine. Still frustrated that all is not working as it should...

Internet is not working on Guest OS.

Hello Everyone ;
Two days before internet was working fine then i have configured static ip using neat command.
after that internet connection is not working !
someone said , if we configure static ip , internet cant access in guest os.
Please help me out from this issue.
[root@oracle ~]# ifconfig
eth0      Link encap:Ethernet HWaddr 00:0C:29:88:C5:DA
          inet addr:192.168.1.200 Bcast:192.168.1.255 Mask:255.255.255.0
          inet6 addr: fe80::20c:29ff:fe88:c5da/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:368 errors:0 dropped:0 overruns:0 frame:0
          TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:43981 (42.9 KiB) TX bytes:7334 (7.1 KiB)
          Interrupt:67 Base address:0x2024
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:2083 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2083 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:3803104 (3.6 MiB) TX bytes:3803104 (3.6 MiB)
Guest OS : oel 5.5 on vmware 9
Host : windows ultimate
Thanks in advance ..

I'm not using VMware anymore and switched to free Oracle VirtualBox, but the concepts are the same. The default virtual machine NAT adapter is only good for connecting to the Internet using DHCP on behalf of the host OS and cannot be used to address the guest OS from outside.
You need to configure the bridged network adapter, or a combination of NAT for outgoing and host-only for incoming network traffic. There is plenty of info on the web and the VMware knowledgeable or Google about using the virtual network editor.

Datasocket does not work with two network cards

If I have two ethernet card in a PC. The Datasocket server does not work if the second card is enabled. It keeps displaying resolving IP Address. I am wondering if there is a solution for this problem.
Thanks

Thanks for you reply. One card has a static address(10.20.35.1), which is used for Data socket, and the other card uses a dynamic IP address. The card with dynamic address is only used for connecting the PC to the company’s network.
The second card, when turned on causes the Datasocket server problem. In the Datasocket Server manager I have only two IP addresses under Permissions Groups. (10.20.35.1 and 10.20.35.11. 10.20.35.11 is the IP address of the remote PC with labview application. The Datasocket is used to transfer data between the two PC’s)
I am wondering if my set up for hosts in Datasocket Server manager is not correct.

IPod touch not working with home network?

I know this question has been brought up dozens of times before, but I couldn't find a working solution in any other posts so allow me to explain my situation.
I got my touch a few months ago, it was working fine with my unsecured home network. Now, the ipod claims that is connected to my network, however it will not load webpages or anything else that might make it seem like it has an internet connection. When I go to Safari, the page attempts to load for what seems like forever and then comes up with the same message everytime claiming that the server has stopped responding or that the server cannot be found. It does, however, work perfectly with the free Wi-Fi hotspots that I connect with in businesses with no problems at all.
I have tried:
Resetting Network Settings
Resetting iPod (factory restore)
Resetting my router
Renewing the Lease on my iPod network connection
Turning the iPod's Wi-Fi on and off
Turning the iPod off and back on
Changing the DNS number to (4.2.2.2,4.2.2.3.)
I'm not sure if this is significant, but when I am "connected" to my network according to my iPod, it says I have full signal. When I am disconnected and my default network is just on the list of networks, it says that there are only two bars of signal strength.
Please help, I don't know what is wrong with this thing.

Have you updated your router firmware lately? If not, please do so.
DNS is usually provided by your ISP. I would use that unless your other devices can't reach the network either. A good alternative is OpenDNS which you can find out about at opendns.com.
When you think you are connected, tap Settings > WiFi > then the little blue > next to your network name. What type of IP address are you seeing? If you see that your IP address starts with 164, then you really are not connecting to your network.
You might want to look at a couple of router settings. What is DHCP set to? (this issues your IP address) and What is MAC address filtering set to? (if this is on and your iPod MAC address has not been entered into the router table, you will not connect). DHCP should be on, MAC address filtering off. Additionally, look at what your default DNS is set to. Most routers have a box to check saying "Use ISP" for DNS.

Intel 7260 does not work on open networks/filtered ports

Hi Everyone! I made sure to check if this was posted before and tried to fix everything I could before asking you guys. For the past few days, I have been using Android wifi tethering as I was unable to get the speed up above 1000 B/s at my school. This means that the pings work, but I am unable to do anything else.
I have the latest kernel and the latest firmware (downloaded from the iwlwifi kernel.org section) and am currently using NetworkManager. My wifi works on my WPA network at home, but nowhere else. This is a fresh install of Arch running Gnome.
Laptop model: ASUS Q302LA
Outputs of my stuff:
lspci gives me:
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
00:04.0 Signal processing controller: Intel Corporation Device 0a03 (rev 0b)
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 1 (rev e4)
00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
02:00.0 Network controller: Intel Corporation Wireless 7260 (rev cb)
uname -r is:
3.18.6-1-ARCH
Config on the settings is all the automatic ones. I get the signal strength and the speed but data transfers at a ridiculously slow rate. When I had Windows, it was 50 Mb/S.
If you need anything else, I can give you all you need.
All ports are filtered.
Thank you for helping. If this is in the wrong section, feel free to move it.

For people that end up stumbling upon this thread: I talked to the IT director at my school and he said that it's normal for Linux (using open source drivers) users to find problems with connection. (Also, the USB wifi card I tried did not work.) As of now, it's a problem on the provider's end. If you can, ask them to update their "wifi stuff" and if that doesn't work, see if you can get them to secure the network with WPA2/PSK. (Probably won't happen) I was fortunate that I contacted him during the planning phase for securing the wifi and only had to wait a few days.
Keep it Simple

Splitting does not work on a networked drive.

My iPhoto Library is on a following networked drive connected by cat6.
Linux:CentOS 4.2+samba 3.0.10-1.4E.12.2.
In this environment, splitting photos does not work. When splitting photos, initially photos are splitted into two events. Then I change a event's name from 'untitled event' to something.
After that, new directory is created automatically to store photos of new event, and then photos of a new events are moved into this new directory. However, in actuality, new direcotory was created and was renamed, but none of photo was moved from an original event directory into a new directory. As a result, iPhoto lost links for these photos, and I can't access these photos any more.
I think permission of iPhoto Library is correct. Because I can add, edit and delete photos manually within iPhoto.
As a workaround, I create a new event first manually, and then cut & paste photos into that from an existing event.
According to posted topics in this forum, it seems that iPhoto contains a problem when iPhoto Library is stored on a networked drive. Is this also an issue that only Apple can fix...?
Any hint would be grateful.
Thanks in advance.

My problem was also solved. The root cause of this problem was ':'. When splitting events, iPhoto attempts to create a folder named like '2007:08:16' temporarily. In my case, as I described my Library was stored on a Linux Server via the Samba. But the Samba refuses a folder name which is including ':'.
That's why, iPhoto was not able to create this temporary folder.
To solve this problem, you have to throw the Samba away and use another file sharing architecture. I decided to use netatalk. Netatalk can accept ':' as a folder name.
I already installed the netatalk on my Linux Server actually and tried splitting events. As a result, iPhoto was able to split events as expected.
FYI:
From my understanding, most of NAS products are using the Samba as their architecture. People using NAS has a possibility to face this problem.

IPX not working with new Network Configuration

Here is my situation. I have been engaged with a customer that had the following equipment.
1x 3640 Router running IOS c3640-d-mz.121-3a.T1
1x 3550 L3 Switch running IOS 12.1.15 EMI
8 x 3548XL L2 Switches running IOS c3500xl-c3h2s-mz.120-5.WC13.bin
When I was asked to look at the network they were experiencing slow LAN speeds (10.8MB file between two LAN hosts around 12 minutes). This network consisted of 10 Class C networks 10.5.60.x - 10.5.69.x, these networks were based on the 3560 split between two interfaces. Odd ranges on FE 0/0 and Even on FE0/1. The router was acting as a stub router on a T1 from the clients core network provider. This core provider has IPX services that my client has to be able to use. Under the old design there was no VLAN structure and basic network services such as DHCP barely worked.
Now the network is configured with the 3640 router as the edge routing device and the 3550-48-EMI is configured as the LAN routing devices. I have split the 10.5.60.x range in two using the lower segment for VLAN 60 and using the upper range as the communication network between FE 0/48 on the 3550 (ip addr 10.5.60.130 255.255.255.128) and FE 0/0 on 3640 (ip addr 10.5.60.131 255.255.255.128), these interfaces are connected via an ISL Trunk. Each VLAN is set at the 3550 with the gateway of 10.5.x.1. Each of the 8 3548XL switches is configured with all of the VLANS and are linked to the 3550 via 100 BaseT and 1000BaseT interfaces configured as dot1q trunks. Multicast routing is enabled on the 3550 to allow services like MDNS and Imaging to occur across VLANS.
With all this said IPX is not working. My 3640 edge router is still seeing all of its upstream IPX servers and networks. This router also sees the local IPX network as connected out of FE 0/0, based on this config setting (ipx network 1368023) FE 0/0. I'm guessing that this piece of the puzzle is based on my L3 changes on the LAN. But I just am not able to wrap my head around what it is. Any help that could be offered concerning this issue would be greatly appreciated.
Whatever the solution is it needs to happen with no more hardware and this new structure has to stay in place. I have been able to fix all ip network services such as DHCP and the customer reports a 1013% speed increase from the point when I first arrived. The 10.8 MB file mentioned above now transfers in about 8 to 10 seconds across the LAN.
Again Thanks.

I was pretty sure of that. Is there anyway to tag the IPX traffic to a VLAN from the 3600 as described in http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t1/ipx_vlan.htm Which so far hasnt worked...
Or is there a way that I can simply use broadcasts at a L2 level to accomplish connectivity? This was working like a charm under the bad network configuration that was purely L2 and 10 subnets drapped accross two router interfaces. It seems like there should be some sort of simple fix I'm missing.
Otherwise is there a way to have the VLAN clients talk up to the 3600 in order to get IPX information? In the end this is a short term fix. 3 weeks from now the IPX app is being replaced by and IP app. But I need it for 3 more weeks.
Thanks,
Josh

WAP321 NOT WORKING IN GUEST NETWORK

Similar Messages

Maybe you are looking for