WAP4410N - Will these ever work properly?

I have owned one of these for about 2 years now, and have sold many of these to clients. Luckily, none of them get used too much as they require constant rebooting, and it would appear as though all versions of the firmware are unreliable. Some simply don't work, other work for a day or two at a time between reboots.
Does anyone have a solution to getting these to work properly? When I say properly, I mean, you turn it on, configure it and then use it. That's it. No rebooting, not even once a year.
Anyone?

I have 3 x WAP4410N and had lots of issues. Now they are stable. I think it's the settings below in BOLD that count.
But I did first reset the unit to factory settings; upgrade firmware; restart; and then enter all settings MANUALLY. All as per Cisco instructions. Do not just install the fw over the old fw; and do not import your settings. But I don't think any of this made any difference, but do it anyway for sure.
Here is my config. Anything not mentioned has not been enabled. Settings in BOLD are important I think - and are settings folks have mentioned that have solved issues for them. YMMV.
Static IP address
Force LAN Port Speed to 100M: Enabled
Discovery (By Bonjour): Enabled
Wireless Network Mode: B/G/N Mixed
Wireless Channel: 2
Wireless Isolation: (between SSID: Enabled)
Security Mode: WPA2-Personal
Wireless Isolation: (within SSID: Disabled)
WPA: AES
Pre-shared Key: All lowercase 11 a-z characters. No funny characters or numerals.
Key Renewal: 36000
Wireless Connection Control: Disabled
VLAN: Disabled
Country: UK
Worldwide Mode: Disabled
Channel Bandwidth: 20MHz
Load Balancing: Disabled

Similar Messages

Will dynamic global hostnames ever work properly again?

AEBS firmware 7.4.1 broke dynamic dns updating. Any attempt to set it up now simply results in TSIG errors.
7.4.2 didn't fix it.
Has anyone gotten signed dynamic DNS updates working on recent firmware revs of the AEBS?
Will this feature ever work properly again???

Hi berkeleywalker,
I understand your discontent. I can assure you that all software updates developed by the manufacturer are intended to make your phone work better. Since you have done a Factory Reset and your phone continues to experience performance issues after you installed your applications, I recommend running your phone in Safe Mode for a while to ensure that no third party application conflicts exist. If your phone works properly in Safe Mode then a third party application conflict is causing your phone to malfunction and the conflicting application must be identified and removed from your phone.
There is no easy way to identify a conflicting 3rd party application, the only way is to remove all applications and add one by one and test until the conflicting app is identified and then removed for good.
AntonioC_VZWSupport
Follow us on Twitter at www.twitter.com/vzwsupport

Clicking on iTunes ikon and I get the message the item iTunes.exe that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly. What can I do, I can't open Itunes. I have over 4000 songs in iTunes that I had

When I click on the iTunes ikon I get a box pop up which reads Problem with shortcut. The item iTunes.exe that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly.
My computer which is a packard bell vista operating system, recently stopped working as the power supply overheated and blew up and it has recently been sent back to the Know How team at PC world and it seems to be since it came back I now cannot open iTunes. I have also tried to search for iTunes in the search bar, I can see several files, but can't seem to open any of these either. I think that quicktime isn't working, either.
I have over 4000 songs in iTunes that I had recorded from my collectiong of CD's am going to loose all these now? Can anyone help, with very easy instructions as I really don't know what I am doing??
Thanks

I would copy over the entire thing if you have room. With iTunes 10.4 though, you can download any previous iTunes purchases you have made in the past with your current iTunes account. While in iTunes, look at the left hand side of your screen and select "Purchases" and look at the bottom right corner of the screen and select "Download Previous Purchases". If you have an iPhone, iPod and/or iPad...you can do the same thing from each device. Nice new feature...just remember that those ripped CDs need a back-up!!! Enjoy...

Will Siri ever work in Bangladesh....

My very first question to you APPLE...
"Will SIRI ever work in Bangladesh?"
Because when I bought iPhone 4S in Bangladesh, I tried to communicate with SIRI but whenever I Say anything to it or command to call a specific contact,
it says "Sorry I cant answer your question right now please try again later" and many other comments regarding the failure...
And many of my Friends have the same problem...
So my question again. Will Siri ever work in Bangladesh??????
Thanks
Shams Tajul Islam.

Apparently you are unaware that you are not writing to Apple Here. No one from Apple responds to these Posts. We are just fellow Users like yourself who volunteer to help each other solve problems. We can't help you with your problem because we have no way of knowing Apple's future plans anymore than you do..
Hope this helps

Will AE ever work with / support the Nvidia GTX-970 cards?

Will AE ever work with / support the Nvidia GTX-970 cards?

All features but one already work with these cards. The one exception is the GPU acceleration oft he ray-traced 3D renderer, which is an obsolete feature that is being phased out.
details:
GPU (CUDA, OpenGL) features in After Effects

Getting error message : the item Itunes.exe that this shortcut refers to has been changed or moved so this shortcut will no longer work properly. I get this either using the start menu or the desktop shortcut. I tried going to programs /itunes and repair.

Getting the error message:
the item Itunes.exe that this shortcut referes to has been moved or changed so this shortcut will no longer work properly.
I tried going into the control panel/programs /itunes and selected repair which didn't fix it. Any suggestions on restoring the broken shortcut without removing and re-installing the program?
Running windows 7 home premium SP1
Thank you

I think it is some sort of permissions issue preventing the installer from updating the shortcuts. Is your account an administrator of the machine? If it is and you still have the problem then you may need to explicitly use the "Administrator" account for the install.
tt2

I just downloaded the latest itunes update 11.1 and now I get an error messages saying "The item 'iTunes.exe' that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly."

I just downloaded the latest itunes update 11.1 for windows 7 and now when I try to open itunes with the shortcut on my desktop I get this error message: "The item 'itunes.exe' that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly." I can't open itunes at all. Is there anything I can do or is there a problem with the new update?

Start > Programs = Firefox
Does that shortcut work?
If so, delete the current shortcut that is in the Quick Start tray and drag the one that is in Start > Programs down there.

When trying to open lightroom I get a message that says, "The lightroom.exe that the short cut refers to has been changed or moved, so the short cut will no longer work properly. Do you want to remove this short cut? The program has opened and worked fi

When trying to open lightroom I get a message that says, "The lightroom.exe that the short cut refers to has been changed or moved, so the short cut will no longer work properly. Do you want to remove this short cut? The program has opened and worked fine in the past.

You have (probably accidentally) moved or deleted the Lightroom program. You need to find it (have your operating system search for lightroom.exe) and move it back to where the shortcut expects it to be.

If ipod has been dropped in water, will it ever work again?

If ipod has been dropped in water will it ever work again?

Maybe. Do not use or charge until it is dry. Dry using the instructions here:
How to fix a wet iPod or iPhone | eHow.com

Will my Incredible ever work properly again?

I have devoted endless time and energy to trying to get my phone to work since the system updates started appearing. I should note that I am not a techie, I don't enjoy fiddling with electronics, and I can't follow many of the fixes that people have posted. I just want my phone to work as reliably as it used to! The issues I have experienced have been well documented in every discussion group I have visited. Some -- but not all of these included: false warnings about memory shortages, phone turning off, voice searches not working while in the car, gmail not working on phone. When I tried deleting music and pictures and then restarting the phone, I got stuck in one of those endless "DROID!" startup loops. I made an emergency trip to a Verizon store, and the salesman said that my phone had never received the update properly -- thus the repeated smaller update messages -- and a factory reset would fix that issue. He did get the update to install; but, of course, I then had to reinstall all my apps, preferences, etc. Since then, gmail and voice searches are working again, but I continue to have strange and frustrating problems. The radio shuts off at random, which it never used to. For about a week, even the phone qua phone would not work. I could not dial a number by touching a contact or a listing in my call record. I had to go into View contact and select the number I wanted. That's what I had to do on my old "stupid" phone. Three days ago, without any intervention, the phone started to behave normally again. But then about 36 hours ago all my pictures and music vanished from the phone without a trace. WHAT's NEXT?! This phone is supposed to make my life easier; instead it has became an anxiety-provoking pain. FYI: I have software number 4.08.605.2 and Android Version 2.3.4

Hi berkeleywalker,
I understand your discontent. I can assure you that all software updates developed by the manufacturer are intended to make your phone work better. Since you have done a Factory Reset and your phone continues to experience performance issues after you installed your applications, I recommend running your phone in Safe Mode for a while to ensure that no third party application conflicts exist. If your phone works properly in Safe Mode then a third party application conflict is causing your phone to malfunction and the conflicting application must be identified and removed from your phone.
There is no easy way to identify a conflicting 3rd party application, the only way is to remove all applications and add one by one and test until the conflicting app is identified and then removed for good.
AntonioC_VZWSupport
Follow us on Twitter at www.twitter.com/vzwsupport

Will Dreamweaver CS4 work properly with 10.6.1 Snow Leopard?

Hello
Can anyone tell me please, if Adobe Dreamweaver CS4 work properly with my MacBook OS 10.6.1 Snow Leopard? Adobe state "Mac OS X v10.4.11–10.5.4" in the system requirements, but does this mean, in practise, that Dreamweaver will not work properly with Snow Leopard?
I have tried to find info about this here, but have spend ages wading through masses of complaints about various applications crashing for people after they upgraded to 10.6.1 Snow Leopard. Personally, touch wood, I've had no problems with Snow Leopard, but I only really use it for Internet surfing and word processing (my work, music stuff on Logic Pro 8, is done on my Mac Pro which came with Leopard and which I am NOT upgrading - not yet!).
I have also attempted to get an answer from Adobe - I 'phoned their "Pre-sales enquiries" number 0800 028 0148 (in the UK) and spoke to someone who sounded as if she was on the moon and who clearly had absolutely no idea what I was talking about. I gave up with them! They didn't give an email address to ask on.
I'd be very grateful if anyone can give a clear, authoritative answer please - if possible.

I've been a Mac user since 1987 and have never upgraded the OS too soon after a new version was launched. Any new OS, like new houses, will have a 'snagging list' - unforeseen problems that arise and need to be sorted before your purchase is truly habitable and functions as expected.
But the stability of OS X 10.5 paved the way for my lapse of judgement when I upgraded to Snow Panther last week, while its compatibility with some major software is still clearly too buggy.
I've been using Dreamweaver (DW) CS4 successfully on OS X 10.5 for some time. Since installing OS X 10.6.1 I now have problems with DW, which I've alerted Adobe to.
When using Design View in DW CS4, any formatted text - from html tags to css tags - disappears from the Design view. The code appears correctly in the Code window and even if you highlight text that has coding attached in Code view - eg text with a url link attached - the Design view continues to ignore it and removes the text from its view. I've discovered that my heading tags (h1, h2, etc) all make the text disappear in Design view in a way that would be the envy of members of the Magic Circle! The only thing that seems to get through is text that is surrounded by paragraph tags.
Thing is that 'Preview in Browser' shows the page correctly (except in Opera, which I've only installed since installing Snow Leopard, so I can't say how this displayed in the previous OS versions).
Also when I upload the site to the server it all seems to display more or less as it should.
So currently it seems that DW CS4's Design view is no longer WYSIWYG! Expect to find lots of text hidden in Design view and have to use Code view much more.
It would be nice to think that Apple and Adobe would talk to each other and work it out between them.
re: Dreamweaver, I'd check back to Adobe.com regularly to see when they upgrade the OS requirements to 10.6.1 (I hadn't spotted before I bought Snow Leopard that they only go up to 10.5 in their OS recommendations).
My advice if you're thinking of upgrading to Snow Panther: delay it until it more of it works compatibly with your major applications. Check the OS spec from each software manufacturer first. Meanwhile I'll just have to wait patiently for Apple & Adobe to get their act together...
Message was edited by: bcmartin

HT202905 Will AppleScript ever work on my iPad? I want it in numbers for stock info

Will AppleScript ever be supported on iOS? I want to use it to get stock information into numbers.

Hi,
I have the same question.
Have you tried or looked at whether the Automator app on the MAC has a component that works on the iPad or iOS? They have a website
http://macosxautomation.com/automator/
(this app can be found usually under the launcher>utilities folder on the MAC)
Maybe you could submit this to Apple FEEDBACK.
Certainly some knd of script for iPAD would be useful. I am new to the iPAD and really don't know much about what it can do- just what I want to do.
Good Luck

Will Videos ever work?

Ok I know that the iPod touch works well with you tube, in fact its working beautifully, but what i don't get is that in Safari you can not watch videos on any other website, such as trying to watch sport videos on yahoo. all that appears is a little box that indicates that some information is there. What i wondering is will there ever be an update to voyager to allow it to play videos in websites. thanks for the response ahead of time

The iPod touch doesn't support flash (a pouplar video format). In Febuary '08 Apple will allow third party apps which may or may not include flash.

HT3529 Is iMessage down? And when will it be working properly ?

I'm texting other iPhone users and the iMessage stops at the end before sending and then just turns into a text message. Please need help. When will iMessage start working ? Are the iMessage servers down?

Both myself and my best friend have had issues with iMessage today. Tried to turn it off and on again and now it's not working at all and is "waiting for activation". I haven't asked any of my other iPhone friends, but am starting to wonder if it's system wide?

Will "File Save As" ever work properly in Safari?

Even though I've been a long-time Safari user (with occasional dalliances with Firefox) this has always been a personal bugbear...
In general, I like the way that Safari will play an mp3 file in the browser window. And then I have a choice... if there's a link to an mp3, I can right-click or ctrl-click and select "download file as". Fine.
But...
If the mp3 was launched via another app (clicking a link in Mail, for example) I can only play it in the browser window. I can't save it, because File > Save As simply results in a meaningless 4KB file landing on my desktop. Even worse, that option seems to be greyed out on Safari 4 Final.
This has always been the case with Safari, but it works fine on Firefox. Why?

Safari Menu Bar > Window > Open the Activity window and the Download window. Copy the MP3 that is downloading (playing) in the Activity window and paste into the Download window. Videos too.
S.

WAP4410N - Will these ever work properly?

Similar Messages

Maybe you are looking for