WAP561 - Apple Bonjour trouble
Hello,
I have two access point WAP561 with the last firmware ( 1.0.4.4). I have big trouble with apple Imac & Macbook.
-Apple disconnecting
-Bonjour Discover didn't work after 2 days
I must reboot every 2 days the AP for workaround the problem.
I had try new settings :
-disable Green ethernet mode
-Fix Multicast rate
-Fix channel
-Disable Bonjour
The bonjour discover still not working after 2 days ...
Thanks for your help
What do you mean with bonjour discover exactly? airplay?
We have Bonjour enabled on all access points and airplay devices show up fine (though sometimes it can take a bit).
Try upgrading to the latest firmware 1.1.0.4 and re-enable bonjour on the access point and leave Green ethernet disabled.
Similar Messages
-
Facing issue while trying to disable automatic discovery of devices through Apple Bonjour
Hi All,
I am facing issue while trying to disable automatic discovery of devices through Apple Bonjour.
Background: Whenever our application is in running state, devices are automatically discovered if it connects to PC. We are using Apple Bonjour's auto discovery technology( mdnsresponder ).
We are registering a particular service type by using DNS API "DNSServiceRegister". Service type is getting registered properly and we are able to discovered that particular type of device.
Platform: Windows 7.0 / MAC 10.8
Issue:
But we are facing issue while trying to disable auto discovery of a device programmatically. i.e, unregistered a service reference programmatically from our windows application.
To unregistered a service we are using "DNSServiceRefDeallocate" DNS API. But looks like it is not working properly.
Is this DNS API “DNSServiceRefDeallocate” is correct one to unregistered the service?
Here is the step by step procedure that we are following to de-allocate a service reference:
1.Browsing / Query a service by using service type to get service reference (DNSServiceRef).
2.Get reference socket FD by using DNS API "DNSServiceRefSockFD".
3.Select a socket by using "select" API.
4.Close the socket that we got from step 2 by closesocket().
5.Delete the service reference by using DNS API "DNSServiceRefDeallocate" and service reference from step 1.
Are we missing any step to unregistered a service?
Regards,
GoutamOriginal problem I noticed was that regular websites I go to (such as msn) were only partially downloading. I could see the text on the site but no pictures or videos. All web surfing was extremely slow. When I would go to a site such as man I would see another address in the lower left corner for "ads1.msads.net" or "cdn.optimizely.com" that is was trying to connect to. I tried using all three of my browsers (firefox, safari, chrome) and got the same response on all browsers. After I spent some time researching the issue I decided I probably had a adware/malware problem so I decided to try adwaremedic.com. I could also not access that site along with thesafemac.com or apple.com. I was also getting the same response on my other devices (iPhone, iPad, and a mac air). I could not access any of these sites on any of my devices although I could get to almost any other site although it was very slow. At that point I decided to unplug the router. I also did a number of other things before then to try and manually get rid of any adware. Eventually I got msn back working, apple.com, and the speed was much faster. But, I still can not access adwaremedic and thesafemac.com. I could access these on my phone with 3G but not on my wifi. This is where the problem still stands. I am sure I still have some adware on my computer and need to find a way to remove it. I am no techie so the complicated manual fixes are difficult for me to do.
-
Hi All,
I'm a seasoned user of Cisco networking products...however this is now in jeopardy...... as I'm driving myself crazy with a problem which is has become resident after upgrading to a CUWN soultion. The basis of my problem is Apple OSX clients ( MacBooks / iPads / iPhones ) cannot connect to any resources via Bonjour. I have done lot of research and I'm not the only one, however some individuals have managed to resolve their issues by 'messing' with their multicast settings...i havnt had any joy at all.....this is now imapcting production networks
In use I have a Cisco 2106 WLC & 1142N APs. Below is a show network summary
any help / guidance would be much appreciated
RF-Network Name............................. Test#1
Web Mode.................................... Disable
Secure Web Mode............................. Enable
Secure Web Mode Cipher-Option High.......... Disable
Secure Web Mode Cipher-Option SSLv2......... Enable
Secure Shell (ssh).......................... Enable
Telnet...................................... Disable
Ethernet Multicast Forwarding............... Enable
Ethernet Broadcast Forwarding............... Enable
AP Multicast/Broadcast Mode................. Multicast Address : 239.1.1.1
IGMP snooping............................... Enabled
IGMP timeout................................ 60 seconds
IGMP Query Interval......................... 20 seconds
User Idle Timeout........................... 300 seconds
ARP Idle Timeout............................ 300 seconds
Cisco AP Default Master..................... Disable
AP Join Priority............................ Disable
Mgmt Via Wireless Interface................. Enable
Mgmt Via Dynamic Interface.................. Disable
Bridge MAC filter Config.................... Enable
Bridge Security Mode........................ EAP
Mesh Full Sector DFS........................ Enable
AP Fallback ................................ Enable
Web Auth Redirect Ports .................... 80
Web Auth Proxy Redirect ................... Disable
Fast SSID Change ........................... Disabled
IP/MAC Addr Binding Check .................. Enabled
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.0.116.0
RTOS Version..................................... 7.0.116.0
Bootloader Version............................... 4.0.191.0
Emergency Image Version.......................... N/A
Build Type....................................... DATA + WPSAre your apple devices on the same subnet or on different subnets?
-
Wie kann ich Apple Bonjour aktivieren
Hallo liebe Foraner!
nach mehrmaliger Deinstallation und Installation erhalte ich beim Systemstart nur die Dienstspezigische Fehlermeldung -1.
Im Systemprotokoll steht noch folgendes:
Ereignistyp: Fehler
Ereignisquelle: Service Control Manager
Ereigniskategorie: Keine
Ereigniskennung: 7024
Datum: 21.10.2009
Zeit: 02:23:40
Benutzer: Nicht zutreffend
Computer: ARBEITSZIMMER
Beschreibung:
Der Dienst "Bonjour-Dienst" wurde mit folgendem dienstspezifischem Fehler beendet: 4294967295 (0xFFFFFFFF).
Bei meiner Firewall wurde der Bonjour-Dienst als Ausnahme definiert. Ebenso wurde der UDP-Port 5353 freigeschaltet.
Weis noch jemand Rat?Downgrading is Not supported by Apple.
Restore youe Device as New... Not from Back Up
Einrichten als neues Gerät
http://support.apple.com/kb/HT4137
Herabstufung wird von Apple nicht unterstützt.
Wiederherstellen youe Vorrichtung nach New ... Nicht von Back Up. -
Today I created a brand new apple ID using a brand new email account. The apple ID created correctly and I was asked to verify the account. When I went to verify, I got a message that says "This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID". This is not possible because I just created the email account. Anyone have any ideas? I am working on setting up 60 ipads and really don't have the 48 hours it says that it will take for apple to get back to me.
There is another thread adressing this issue.
https://discussions.apple.com/thread/3503274?tstart=0
It is nothing that you are doing wrong, there is a problem with Apples verification server. Nobody at Apple has confirmed this, but I'm sure they are working on a fix.
Lawrence -
Apple Mail trouble. Can't drag, can't delete.
All of a sudden yesterday, I couldn't drag emails to subordinate mail boxes. Now, a day later, I can't even delete emails to the trash. I am running Apple Mail 7.1 and have OS X Mavericks version 10.9.1. and made no changes to settings or updates prior to this problem. I tried clearing browser history and the downloads window and that didn't help. Help, please.
Sorry to hear you had the same problem, dannymo54 but I hope you don't give up. I finally called Apple support and they said there was a current "issue" affecting Apple mail. She said to wait a day or two and use iCloud mail (through the Safari browser) in the meantime. Two days later, Apple Mail started working properly for me. Go figure. It left me wondering if I was one of the few or if millions were affected. Guess I'll never know.
-
MAJOR toshiba-apple tv troubles!!
I have a Toshiba TV which I connected to my new apple tv thru an HDMI lead, it worked great - no probs... then I used the same hdmi lead for something else for 1 day... when i re-connected the apple tv to my tv it doesn't work!?? All i get on the hdmi channnel is a blck or grey screen - but i checked my apple tv, it works, so does the hdmi lead AND my tv hdmi socket works with everything else EXCEPT the apple tv..... HELP!!!!!!!!
Hello linzidean
Try by changing the resolution of the Apple TV by holding the Menu and Up buttons for six seconds. Check out the article below for other troubleshooting options to resolve the issue.
Apple TV: Basic troubleshooting
http://support.apple.com/kb/ht1551
Regards,
-Norm G. -
Apple Mail trouble sending messages
I added my Slippery Rock University account to the apple mail server and all of my messages showed up, but when I try to send an email it says there is something wrong with the server and it will not send. How can I fix this?
All of the information I needed was right here: http://www.sru.edu/academics/iats/SupportServices/RSCHD/Documents/RockMailConfig .pdf
Did I do something wrong?1) In the Menu bar under Window select Connection Doctor.
Do you see red lights? If yes, most likely you need to enter your passwords.
If you see all green lights your connections are good.
You can also open the Activity window under Window to see the messages as they download.
2) Create a Smart folder. Under Mailbox in the Menu bar select New Smart Mailbox.
Create a new folder to see messages recevied today (include the trash)
Do you see the messages now? If yes, we need to see where the messages are filed.
What email provider? (iCloud, Gmail, Yahoo, AOL, Earthlink, Comcast, ATT, other) -
New Apple User - Trouble with External Hard Drive
I am not very good with computers so hopefully this is a simple task. I just purchased my first mac, a MacBook for college. I bought a Seagate FreeAgent 160 GB drive with the intent of using it for time machine back ups and also for storing my music. I am wondering how or if this is possible.
So far I have:
- Transferred all my music from my PC to the hard drive no problem.
- I tried to set up Time Machine it said I had to delete everything from the Seagate drive in order to use it.
- I then copied all my files off of the hard drive to my Macbook's HD.
- Found out I also need to reformat my Seagate drive to Mac format.
Now I am wondering how to go about all of this and find out if its possible to store my music files on my hard drive as well as use it to for TM. I was thinking I can just move all my music back to the Seagate after TM erases it...would that work or is TM back-ups the only thing you can have on a drive?
Thank you!Larko,
Generally speaking, you'll need an external hard drive with a capacity that is at least twice the size of the space being used on your internal hard drive. So, if you only have around 30 GBs of data on your new Macbook, you'll need at least 60 GBs for Time Machine. I'm going to state, though, that you'll probably end up using something more like 50 GBs on your Macbook's hard drive, so plan on using around 100 GBs for Time Machine.
Now, what you'll need to do first is format the external drive using Disk Utility (/Applications/Utilities/Disk Utility). In Disk Utility's "source list" at the left side of the window, select your external drive (not the named "volume" that will appear indented below it), then switch to the "Erase" tab. Erasing the entire hard drive will re-write the partition map, using the Apple "GUID" partition scheme (required for use with Time Machine).
If you want to store additional files on the external, that's OK. However, it is recommended that instead of storing both your Time Machine backup and your "personal" files on the same volume, that you partition the drive with 2 partitions. This will allow you to store the Time Machine backup in isolation on its own volume, and your "personal" files on the second. Disk Utility will handle this, too. Instead of erasing, switch to the "Partition" tab, use the pull-down menu to select 2 partitions, adjust the sizes according to your needs, then click "Partition."
I recommend that you size the first partition (for use with Time Machine) at 100 GBs, and the second with the remainder (which will end up being about 40 GBs).
You can certainly store that 10 GBs of music separately, but wouldn't it be best to import it into iTunes? If you do import it, or if it is kept on your Macbook in some other place, it will be backed up by Time Machine.
Scott -
So 2-3 weeks ago I was deleting some files off my Macbook Pro. All of the sudden my computer crashed, and switched the
language, and the screen was flashing. After trying to fix it, and figuring out the problem, I could not figure it out so I decided to re-
install MAC OSX. I erased my whole hardrive and went to the title screen. It wanted me to enter my APPLE ID, but it wanted me to
enter the apple id that was for the PREVIOUS owner. Which I had no clue (it also wanted the password.) So now I am stuck.
I don't know if I should take it to the apple store or what, but this is very annoying. I really need someone's help. Please help me!
Thankyou, God Blessralph40,
when you bought your 13-inch Mid 2009 MacBook Pro from the person on Craigslist, did you also receive two grey installation DVDs with it? They would have originally came in the box with your MacBook Pro; one has a bootable version of Mac OS X for your model (either 10.5.7 or 10.6.0, depending upon when it was manufactured), and the other has your model’s Apple Hardware Test and its iLife apps. If you didn’t receive these two grey installation discs from the seller, then you can purchase a replacement pair from Apple.
If you have either the two grey installation DVDs or the white retail Snow Leopard DVD, and your internal disk is now completely erased (including its recovery partition), then you can reïnstall Mac OS X from the DVD, and associate the MacBook Pro with your Apple ID, which will end the association with the previous owner’s Apple ID. Once Mac OS X is reïnstalled, run Software Update to get to 10.5.8 (from 10.5.7) or 10.6.8 (from the grey 10.6.0 disc or the white 10.6.3 disc), If you’d installed 10.5.7, then you’ll need to install Snow Leopard from the white retail disc to get yourself to 10.6.8. Once you have 10.6.8 installed, you can then download Lion, Mountain Lion, or Mavericks through the Mac App Store if you wish.
If any of the apps on your MacBook Pro had been purchased through the previous owner’s Apple ID, then note that you’ll need to purchase them yourself through your own Apple ID, since apps downloaded through the Mac App Store (including, but not limited to, Lion, Mountain Lion, and Mavericks) are non-transferable. Any apps that were purchased through the Mac App Store using your own Apple ID will be redownloadable gratis by holding down an Option key when you select the Purchased tab. -
Will resetting my iPad air 2 solve my Apple ID problem I had no internet available when initially started up from the box
yes when I used App Store for the first time it asked me to verify my new ID with a credit card ..as I am unable to do this I can not download or install anything to the ipad
-
Problems networking win7 pc to Mac with printer attached using apple bonjour
Bonjour print wizard says “no bonjour printers are available”
Have Mac networked to 2 PC’s. One has win XP, the other win 7 home prem (hereafter referred to as pc2).The printer is attached to the Mac. I can print from the Mac and the XP pc -but not from the win 7 pc (pc 2). Bonjour is installed on both the pc’s. Whenever i open the bonjour print wizard on pc 2, it says “no bonjour printers are available”
THINGS I HAVE CHECKED OR DONE TO RESOLVE THE ISSUE:
system pref. > printers& scanners - verified that the Mac is set up for sharing. (see screen shots 1-3 )
2) Verified that the network is intact and functioning normally - i can xfer files from one to the other.
3) On pc 2 - opened devices & printers - it shows my printer as the default printer
4) Attempted to delet and reinstall the printer - when trying to reinstall the printer, got
error msg “windows could not connect to the printer”
5) checked firewall issue - under “allowed programs and features, there was a tic in the
bonjour service and a tic in the box for home/work network . I understand there is a
UDP 5353 that needs to be open but i did not know how to access this port to verify
that it was open
My observations are that pc 2 cannot “see” the printer installed on the other side of the mac. The Mac can see it as does the xp pc. I’m thinking its a firewall issue but don’t know how to go any further. Any and all help appreciated.Check if any solution works : http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/problems-with-bonjour-in-windows-7/e1a0e074-c844-4982-b353-ea7d859a554a
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread. -
I have recieved an Iphone 4s. The previous owner had downloaded applications that need to be updated. I can not update the applications because the app store is still asking for the previous owners apple ID. I have gone to settings > itunes & app store and logged my own personal apple ID into the phone but I am still not able to update the applications. The app store is still asking for the previous owners apple ID even after logging the new ID into the phone. Any help?
House1960 wrote:
I have recieved an Iphone 4s. The previous owner had downloaded applications that need to be updated.
The very first thing you should have done is to erase the iPhone and restore as new.
This way any virus's, malware, hack's will not get your info.
Also, you can be assured that only your apps will be on the device.
Settings > General > Erase > Erase All Content & Settings.
Then Setup as new. -
WLC - AP Groups - Multicast - Bonjour - Apple TVv3
Good Morning
first off - Should start off by saying I have followed the Apple Bonjour deployment guide [except for interface group] portion
I have searched high and low, here and there to no avail.
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_tech_note09186a0080bb1d7c.shtml
I am aware that the bonjour gateway IOS may or may not come out in Oct/Nov 2012, which maybe my only option at this point.
Is this not working because of my AP groups setup or have I misssed something
I can only get bonjour to work if multicast - unicast mode is selected, but our network slowly grinds to a halt, so it is not an option
when I first connect to the wireless I see 1 bonjour device for about 3 minutes and then disappears.
I can not see the appletv at all with an ipad, airplay does not appear at all.
We have the following setup.
2 campuses - Campus 2 is simular setup, but WLCs higher model and ios 7.2 and clients and subnets are double
Campus 1
2 WLC 4404 ios 7.0.230.0
30 AP groups mapped to 30 Interfaces using subnets with /23 bit subnetmasks
multicast - multicast is set with multicast addresses of
controller 1 239.239.5.1 and
controller 2 239.239.5.2
multicast is enabled
IGMPsnooping as well
On Switch multicast routing is enabled
all AP group subnets and Mgmt vlans are PIM enabled dense mode
set up a trunk to ubuntu server to act as a bonjour gateway, installed avahi and vlan
mapped all AP and mgmt vlans to Ubuntu server.
avahi see the following + more
+ eth0.136 IPv6 Apple TV _airplay._tcp local
+ eth0.136 IPv4 Apple TV _airplay._tcp local
+ eth0.134 IPv6 Apple TV _airplay._tcp local
+ eth0.134 IPv4 Apple TV _airplay._tcp local
+ eth0.132 IPv6 Apple TV _airplay._tcp local
+ eth0.132 IPv4 Apple TV _airplay._tcp local
+ eth0.130 IPv6 Apple TV _airplay._tcp local
more goes on forever
+ eth0.136 IPv4 xyz Library Apple Home Sharing local
show ip multicast
Multicast Routing: enabled
Multicast Multipath: disabled
Multicast Route limit: No limit
Multicast Triggered RPF check: enabled
Multicast Fallback group mode: Dense
show ip multicast interface vlan 128
Vlan128 is up, line protocol is up
Internet address is x.x.128.1/23
Multicast routing: enabled
Multicast switching: fast
Multicast packets in/out: 14671352/276693
Multicast boundary: not set
Multicast TTL threshold: 0
Multicast Tagswitching: disabled
Where do I go from here?Thanks Yahya and Stephen
I have tried to simplify my config as much as possible.
wlc 4404
Ethernet Multicast Forwarding............... Enable
Ethernet Broadcast Forwarding............... Enable
AP Multicast/Broadcast Mode................. Multicast Address : 239.239.5.1
IGMP snooping............................... Enabled
IGMP timeout................................ 60 seconds
IGMP Query Interval......................... 20 seconds
I have an interface created 10.x.x.x/23
I have created a new SSID APPLETV - assigned Interface
I have added the SSID to just 1 AP Group
show network multicast mgid summary
Layer2 MGID Mapping:
InterfaceName vlanId MGID
2upadhoc 136 27
Layer3 MGID Mapping:
Number of Layer3 MGIDs........................... 11
My vlan does not show up here.
I only have 2 devices in this vlan the AppleTV and IPAD
checking the switch for all required vlans
show ip multicast
Multicast Routing: enabled
Multicast Multipath: disabled
Multicast Route limit: No limit
Multicast Triggered RPF check: enabled
Multicast Fallback group mode: Dense
admin interface
Management, AP-Manger
Vlan12 is up, line protocol is up
Internet address is x.x.x.1/24
Multicast routing: enabled
Multicast switching: fast
Multicast packets in/out: 238489978/724352
Multicast boundary: not set
Multicast TTL threshold: 0
Multicast Tagswitching: disabled
AP vlan
Vlan222 is up, line protocol is up
Internet address is x.y.z.1/24
Multicast routing: enabled
Multicast switching: fast
Multicast packets in/out: 11423/238338583
Multicast boundary: not set
Multicast TTL threshold: 0
Multicast Tagswitching: disabled
The test Apple TV Vlan
Vlan136 is up, line protocol is up
Internet address is x.xx.1/23
Multicast routing: enabled
Multicast switching: fast
Multicast packets in/out: 156740/0
Multicast boundary: not set
Multicast TTL threshold: 0
Multicast Tagswitching: disabled
interface Vlan12
ip pim dense-mode
interface Vlan222
ip pim dense-mode
interface Vlan136
ip pim dense-mode
Show ip igmp groups
Group Address Interface Uptime Expires Last Reporter
224.0.1.39 Vlan136 2d00h 00:02:35 x.x.x.1
So just to recap
Same subnet in a AP Group
New SSID
multicast enabled on WLC - using multicast multicast mode
Broadcast forward enable
Switch -Multicast routing enabled
all vlans enabled for PIM
2 devices - added Imac to see if I could home share through Itunes.
end result
no bonjour clients, no apple tv, no airplay
Bonjour Gateway device - although same subnet it shouldn't be needed
eth0.12 Link encap:Ethernet HWaddr bc:30:5b:x:x:x
inet addr:x.x.x.244 Bcast:x.x.x.255 Mask:255.255.255.0
inet6 addr: fe80::be30:5bff:fed6:a178/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:55005 errors:0 dropped:115 overruns:0 frame:0
TX packets:23003 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2776156 (2.7 MB) TX bytes:11285256 (11.2 MB)
eth0.136 Link encap:Ethernet HWaddr bc:30:5b:x:x:x
inet addr:x.x.x.9 Bcast:x.x.x.255 Mask:255.255.254.0
inet6 addr: fe80::be30:5bff:fed6:a178/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:42167 errors:0 dropped:115 overruns:0 frame:0
TX packets:22340 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3251242 (3.2 MB) TX bytes:10373581 (10.3 MB)
eth0.222 Link encap:Ethernet HWaddr bc:30:5b:xx:xx:xx
inet addr:x.x.x.9 Bcast:x.x.x.255 Mask:255.255.255.0
inet6 addr: fe80::be30:5bff:fed6:a178/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:152397 errors:0 dropped:115 overruns:0 frame:0
TX packets:23768 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:12795709 (12.7 MB) TX bytes:11318103 (11.3 MB)
+ eth0.222 IPv6 67665ACD317A45B0 _appletv-v2._tcp local
+ eth0.222 IPv4 67665ACD317A45B0 _appletv-v2._tcp local
+ eth0.136 IPv6 67665ACD317A45B0 _appletv-v2._tcp local
+ eth0.136 IPv4 67665ACD317A45B0 _appletv-v2._tcp local
+ eth0.12 IPv6 67665ACD317A45B0 _appletv-v2._tcp local
+ eth0.12 IPv4 67665ACD317A45B0 _appletv-v2._tcp local
Should Bonjour work same subnet with these settings?
I am going to have read more about the Interface groups and the Multicast vlan. -
Help!.. Cannot see Apple TV in iTunes...
Have Dell PC running Windows 7 64-bit Prof. Hard-wired into d-link wireless router/modem.
Followed all Apple TV trouble shooting advice to no avail. As a final resort have even fully reinstalled PC operating system and still cannot see the device.
As a test Apple TV was found over the same wireless network by my laptop running XP - so I am sure it is not an Apple TV or network fault.
Has anyone got any adive pls?
Message was edited by: samoo74had the same problem. The following was found in another thread on ATV disappearing from iTunes. It was posted by Cima113. I tried it. It brings ATV back in iTunes. Mine has been fine now for a month. I hope this helps someone.
(Copied part starts here)
It appears the best and only known solution for the AppleTV issue (windows) isn’t actually iTunes build 9.1.0.79. After the helpful postings to this thread it appears that the recent update of Bonjour is the actual culprit. Users experiencing this issue (Apple TV stopped appearing in iTunes 9.1.0.79) should try the following if your setup stopped working after iTunes 9.1.0.79.
1) Uninstall Bonjour version 2 :
Start> control panel>> uninstall a program>>> Select Bonjour>>>> Uninstall
2) RESTART your computer!!!
3) Open iTunes…
You should get a message that Bonjour is missing… This is what you want.
*While you have iTunes open make sure “Find AppleTV’s” is selected in iTunes, under:
Edit> Preferences>> Apple TV tab>>> Check box bottom.
(The above step must wait until after you install Bonjour 1.0.6, restart and open iTunes. This option is noy available while Bonjour is not installed)
4) Close iTunes.
5) Install Bonjour 1.0.6 (reputable download site: Cnet’s Download.com see below)
http://download.cnet.com/Bonjour-for-Windows/3000-18507_4-93550.html
6) RESTART your computer!!!!
7) Open iTunes
8) Start AppleTV and …
Go to: Settings> Computers>> locate the “iTunes/Add library” option>>>
Go to PC and Enter code in iTunes.
Restarting after uninstall AND install are critical!!
Maybe you are looking for
-
How do i clean spots on monitor of macbook pro with retina display?
how do i clean spots on monitor of macbook pro with retina display?
-
Jpeg from external swf last frame
Hi hope someone could help me with this. I recently descovered a program mad ein air that allows you to drag and drop a CS^ .fla file and the app will create a CS5 version of that file in the same folder. I am trying to find a way to drag a file into
-
Where can i get hold of a free SMTP mail server to test my mail applications ? Thanks Narsi
-
I upgrade my system to Mavarics. When I get register for icloud Sri Lanka not there? any reason?
I just installed Mavaricks OS. Then I was run iCloud in Mavaricks. So when I'm going to install 'find my mac', country code Sri Lanka not there? any reason for that?
-
How do we import design objects ?
Hello friends, I have a s/w component with a namespace in it containing all my Design objects in the Integration repository(Design). There is an option called Export which i assume exports entire namespace along with the design objects within it to