WAP610N - Can't get an IP from network

hi! i bought a Linksys WAP610N today, i placed it so i could get a signal where i can't normally.
The thing is i configured it correctly, well at least i think, i can see it on my wireless network, with a good signal, but on my Android tablet (Google Nexus 7), it can't get past the "Obtaining IP address".
I called the technical support, the person there tried to help me for about 1 hour, we tried different settings, we upgraded firmware from 1.0.01 to 1.0.04, but it didn't helped. Now he said someone will call me tomorrow during the afternoon. But then i thought i would post this problem here so maybe i could fix my problem faster.
My router isn't Linksys, it's a Netgear, i don't have wireless problem when i connect my tablets or any other wireless device on it, it's just that i bought this WAP610N to have the signal in my bedroom, where i don't get any signal normally.
If someone can help me with this before they call me, or maybe i could even find a better solution here on this community.
Solved!
Go to Solution.

Just like what earthmyrll120288 said, this access point is designed to make your wired devices go online wirelessly thru your router. The best for your setup is the range extender which will provide internet access to hard to reach areas through the wired or wireless connections in your home. Basically, it will repeat the signal from your router to the area where you’re having problems getting a good signal.
When you said that it worked when you put on top of your desk and it gave you better coverage, it would really do that since the wireless settings of the router are already synchronized on that access point. I’m thinking that the tablet is still getting the connection from the router. If ever there are still problems especially with the signal, you might consider the RE1000.

Similar Messages

My roommates' computers can't get a signal from my Airport base station

I just bought a used Airport Extreme (the round one) off Craig's List and set up a network in my apartment using Airport Utility on my MacBook. I've set it up with WPA, and I can connect to it. Works great....
Until my roommates try to connect from their computers. One is on a ~5 year-old iMac and the other is on a Thinkpad. Their machines can see the SSID but can't get a signal from it or connect to it. I've tried removing the password and unsecuring the network. I've tried resetting the router entirely and reconfiguring. Same story.
I know this is an Apple issue because their machines can connect just fine to our previous crappy router that was slowing down our connection (that was meant to be replaced by the shiny new (used) Airport). I've looked into the WEP / hex key issue mentioned on some forums (eg http://www.macwindows.com/airportpc.html#011408b), but I don't think that Apple/PC compatibility is the issue because one of their machines is an iMac.
Help?

Hello amandalotti. Welcome to the Apple Discussions!
Per chance, do you have Access Controls enabled? (ref: AirPort Utility > Manual Setup > AirPort > Access tab) If so, disable it.
If not, I suggest performing a "factory default" reset on the base station to get it back to its original "out-of-the-box" configuration to see if this will help.

ImageIO - javax.imageio.IIOException: Can't get input stream from URL

Hi,
I'm developing a program which accesses a given URL of an image and saves it to a file. However when I try this I get the following error:
javax.imageio.IIOException: Can't get input stream from URL!
     at javax.imageio.ImageIO.read(Unknown Source)
     at ImageSave.main(ImageSave.java:12)
Caused by: java.net.ConnectException: Connection timed out: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(Unknown Source)
     at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
     at java.net.PlainSocketImpl.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at sun.net.NetworkClient.doConnect(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.<init>(Unknown Source)
     at sun.net.www.http.HttpClient.New(Unknown Source)
     at sun.net.www.http.HttpClient.New(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at java.net.URL.openStream(Unknown Source)
     ... 2 moreThe internet connection I am using uses a proxy server and I think this is where the problem lies. I'm using Eclipse version 3.3 and I've tried changing the network settings to use the proxy's hostname and port but this still isn't working. I've also tried using System.setProperty("http.proxyHost", "hostname") and System.setProperty("http.proxyPort", "port") but that hasn't worked for me either. Below is my class in full.
import java.awt.image.*;
import javax.imageio.*;
import java.io.*;
import java.net.*;
public class ImageSave
     public static void main(String args[])
          try {
               URL url = new URL("http://www.example.com/image.jpg");
               BufferedImage image = ImageIO.read(url);
               ImageIO.write(image, "JPG", new File("image.jpg"));
          catch (Exception e) {
               e.printStackTrace();
}The error occurs with the line: BufferedImage image = ImageIO.read(url);
I have tried looking for a way to change how this specific method accesses the internet (e.g: a Proxy parameter with URLConnection) but there doesn't seem to be any.
Any help or suggestions would be greatly appreciated.
-Robert

Ah, that worked fine. I had thought of using that earlier but I was under the impression that the input stream would be HTML rather than an actual image. Not sure why.. Anyway, thanks very much for your help!
Here is the new code with your suggested revisions and a URLConnection to get the input stream:
import java.awt.image.*;
import javax.imageio.*;
import java.io.*;
import java.net.*;
public class ImageSave
    public static void main(String args[])
        try {
             // This is where you'd define the proxy's host name and port.
             SocketAddress address = new InetSocketAddress(hostName, port);
             // Create an HTTP Proxy using the above SocketAddress.
             Proxy proxy = new Proxy(Proxy.Type.HTTP, address);
             URL url = new URL("www.example.com/image.jpg");
             // Open a connection to the URL using the proxy information.
             URLConnection conn = url.openConnection(proxy);
             InputStream inStream = conn.getInputStream();
             // BufferedImage image = ImageIO.read(url);
             // Use the InputStream flavor of ImageIO.read() instead.
             BufferedImage image = ImageIO.read(inStream);
             ImageIO.write(image, "JPG", new File("image.jpg"));
        catch (Exception e) {
             e.printStackTrace();
}Edited by: Ragnarob on Apr 21, 2009 2:49 AM

How can i get all values from jtable with out selecting?

i have one input table and two output tables (name it as output1, output2). Selected rows from input table are displayed in output1 table. The data in output1 table is temporary(means the dat wont store in database just for display purpose).
Actually what i want is how can i get all values from output1 table to output2 table with out selecting the data in output1 table?
thanks in advance.
raja

You could set the table's data model to be the same:
output2.setModel( output1.getModel() );

How can i get thes songs from ipod nano to the itunes libary??

hi
i have ipod nano and i sync it with over 500 songs .....my bad i lose all that songs on my libary .... how can i get thes songs from ipod nano to the itunes libary??

See this older post from another forum member Zevoneer on different ways to copy content from your iPod to your computer.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Can you get values back from a stored procedure via OUTPUT parameters?

Can you get values back from calling a stored procedure via OUTPUT parameters/variables? I call the SP via a SQL statement from a script either in a WF or DF.
I thought I read some reference that DI could not get the values from OUTPUT parameters but I could not find it again (don't know if it is in any of the documentation or referred to in a forum.
I did try a couple of tests but it did not reutrn any values via OUTPUT. But before I give up I thought I'd see if you could and maybe I needed to change something.

This isn't exactly an answer to your question, but I'll point out that, given that you're resorting to a SQL script in the first place, there's no reason you can't also turn the output parameters into a regular result or record set. (The following uses T-SQL, although I think it's pretty generic.)
declare @param1 int, param2 varchar(100), @return int;
exec @return = proc @param1 = @param1 output, @param2 = @param2 output;
select @param1 as param1, @param2 as param2;
That is, to get from output parameters to a "regular" output from the SQL script isn't much of a leap...
Jeff Prenevost
BI Consultant
Ann Arbor, MI

Can viewObject get a parameter from sessionScope to binding variable?

hello,
using Jdev11g ADF Fusion application
Can viewObject get a parameter from sessionScope and assign into binding variable ? without using executeWithParameter
Thanks
greenApple

A. Safwat,
As I said before, I was not trying to be offensive, but simply to explain some of the shortcomings of one solution over another. One of the reasons people give such short answers is that many questions (including this one) have been asked and answered many many many times before on the forum. As to my reasons:
1). Overkill - overkill because you are writing code to do what the framework already provides for you.
2). Not bind-variable friendly - you are gluing in literals into a SQL statement. That means that Oracle will have to hard parse the query for each new value of the filter clause, yielding to poor performance, particularly in a multiuser environment. It should ideally be done using bind variables.
3). Insecure (think about what happens if you put "'xyz' or 1=1" into the filterValue there) - not using bind variables is a security hole. Think through what happens if a filter criteria comes through like the one I mentioned.
4). Inflexible - because you are overriding executeQueryForCollection, this VO becomes inflexible and can only be used in this particular place. Using the declarative approach outlined by Timo is more flexible
5). Bad (ok, that's my opinion there) - OK, perhaps this was a bit offensive ;)
Please don't take a critique of a post as offensive, as I assure you it was not intended to be in that spirit. As I mentioned, I greatly appreciate when people point out issues/problems/etc with my ideas, as that is the best way for me to learn. I have in the past written applications that were not bind-variable friendly, and I learned the downsides the hard way (system was horribly non-performant) - I wish someone had reviewed my approach and told me "bad idea" before the application made it into production.
Respectfully,
John

How can I get all photos from iPhoto to automatically back up to iCloud from my Mac OSX Version 10.6.8 operating system. Not enough memory to upgrade.

How can I get all photos from iPhoto to automatically back up to iCloud from my Mac OSX Version 10.6.8 operating system. Not enough memory to upgrade.

You can't. iCloud is not for general file backup from a Mac. It's for backup up and syncing data between mobile devices and and Macs and The following is from this Apple document: iCloud: Backup and restore overview.
iCloud automatically backs up the most important data on your (mobile) device using iOS 5 or later. Once you have enabled Backup on your iPhone, iPad, or iPod touch .....
What is backed up
You get unlimited free storage for:
Purchased music, movies, TV shows, apps, and books
Notes: Backup of purchased music is not available in all countries. Backups of purchased movies and TV shows are U.S. only. Previous purchases may not be restored if they are no longer in the iTunes Store, App Store, or iBookstore.
Some previously purchased movies may not be available in iTunes in the Cloud. These movies will indicate that they are not available in iTunes in the Cloud on their product details page in the iTunes Store. Previous purchases may be unavailable if they have been refunded or are no longer available in the iTunes Store, App Store, or iBookstore.
You get 5 GB of free iCloud storage for:
Photos and videos in the Camera Roll
Device settings (for example: Phone Favorites, Wallpaper, and Mail, Contacts, Calendar accounts)
App data
Home screen and app organization
Messages (iMessage, SMS, and MMS)
Ringtones
Visual Voicemails
But not from a Mac. If you want to backup your photos and other important files I suggest you get an external hard drive and use it with Time Machine.
OT

How can I get all photos from the camera roll onto the photo stream so they will share between iphone and ipad?

How can I get all photos from the camera roll, and all new pictures taken, to get on the photostream so they can share between iphone and ipad?

When turning PhotoStream on with photos available in the Camera Roll, only photos captured by the iPhone or saved on the iPhone are placed in the PhotoStream.
For all photos that were in the Camera Roll prior to turning PhotoStream on, import the photos with your computer and add the photos to your PhotoStream on your computer.

HT1454 why i can not get video out from my ipod touch after i did the upgrade

why i can not get video out from my ipod touch after i did the upgrade

why i can not get video out from my ipod touch after i did the upgrade

HT1454 Can not get video out from my ipod touch 3rd gen. Any ideas? It should nt be diffiicult to do this on the 21 st century, or not?

After having spent EUR 130 on cables from apple, i still can not get video out from my ipod touch 3rd gen. Any ideas? It should nt be diffiicult to do this on the 21 st century, or not?

Backing up an iOS device will copy some data to a backup file within iTunes, but this excludes all media. You can also transfer iTunes Store purchases from the iDevice to iTunes but, without using a third-party tool, nothing else. As long as you do not sync the iPod with your new library, the media that's on it will remain ... for as long as it keeps functioning, is not lost, stolen, eaten by the dog, ...
You may also have an option to recover your previous library from your old laptop; as long as its hard drive isn't fried, a computer repair store or technician may be able to extract the drive, mount it in an external enclosure, and copy your data to another PC. Whatever you choose, there is no real alternative to having all your media on your computer, managed by iTunes, and regularly backed up to another device/location.

I have an iPod Classic and the latest version of iTunes. I make all my purchases on my computer, but when I try to click the "add to" option and transfer the songs to my iPod, it doesn't work. How can I get my songs from my computer to my iPod?

I have an iPod Classic and the latest version of iTunes. I make all my purchases on my computer, but when I try to click the "add to" option and transfer the songs to my iPod, it doesn't work. How can I get my songs from my computer to my iPod?

See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
Recovering your iTunes library from your iPod or iOS device
B-rock

Can i use some other company's locked iphone? or can i get official unlock from apple? cause i had iphone but it got water damage and don't want to pay crazy amount of money to get brand new...

can i use some other company's locked iphone? or can i get official unlock from apple? cause i had iphone but it got water damage and don't want to pay crazy amount of money to get brand new...
and i m getting locked phone from my family memeber for free. but he's with some other carrier. so can i get official unlock for that phone. please help me with this.
thank you

Only the original cellular provider can authorize unlocking. You will need to contact them to determine if they offer unlocking and if the phone qualifies.

HT4437 I want to develop a software with AirPaly service for business things. How can I get the permission from Apple?

I want to develop a software with AirPaly service for business things. How can I get the permission from Apple?
This one is used in Windows laptop, and I want it support AirPlay service, but Apple doesn't publish the AirPlay protocol.
Many thanks.

Create a developer account, then access he developers forums and see if you can find the information that way
The other option would be to simply contact Apple directly.

I have a personal Apple ID for my home pc and iPod, and a work Apple ID for my work laptop and iPhone. Can I get the music from my home pc on my work iPhone?

I have a home Apple id for my home pc and ipod. Then I had to create a work Apple id on my work laptop for my work iPhone 4s. My question is how can I get my music from my hoe pc onto my new iphone 4s? Thanks in advance

Time to contact Apple support directly and have them assist you with resetting the password.
http://www.apple.com/contact/
B-rock

WAP610N - Can't get an IP from network

Similar Messages

Maybe you are looking for