Waranty start date not correct

I bought a Pavillion P6-2330 "off the shelf" from the HP online store in early February, 2013. A few days after setting it up, a pop-up appeared offering to sell me an extension to my warranty. The start date shown in the pop-up for my warranty was November 7, 2012 - over three months before I received my computer. I called HP, and found out that my computer was MANUFACTURED on November 7, 2012. My warranty SHOULD HAVE started on the day in February when I recieved it. After I faxed my receipt to HP, they adjusted my warranty to the correct date in February of 2013. How many out there don't know about this, and have shortened warranties?
You can check your warranty start and end dates in the HP Support Assistant, under the Warranty tab.

Hi,
Usually warranties start at the time of purchase. I wonder if someone else had previously purchased the PC and then had returned it for some reason.
Years back, I ran into warranty issues when the manufacturer had started that warranty on the ship date. I finally got the manufacturer to change that to date received (delivered). The cost of a warranty day on very expensive equipment does add up. Additionally, the time to return the device for a refund is also shorten if the ship date is used.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

Error AA168 Ord.dep.start date not allowed in dep.area 60 (Please correct)

Hi experts,
We upgraded to ECC6 from 4.7 version last month.
For some assets we have start deprecation date filled for area 60 with deprecation key LINV.
We would like to modify deprecation key to 0000 but we have error "AA168 Ord.dep.start date not allowed in dep.area 60 (Please correct)"
Have you any idea to resolve this issue.
Thank you in advance
Kind Regards.

Dear Shankar
here is what i have in transaction
001     01/01/02/02          01     01     02     02
002     01/01/01/01          01     01     01     01
003     01/06/02/02          01     06     02     02
004     06/06/02/02          06     06     02     02
i do not anderstand any thing in this transaction
Can you help me resolving this issue?
Thanks in advance.
Kind regards

Time and Date not correct

Hi to all.
Does anybody know how to save your cmos settings to a floppy or CD?
Is there a program that can assist with saving the cmos settings to floppy or CD?
Is there anyway to perform saving the cmos settings within the BIOS to floppy or CD?
I really don't want to go into the BIOS and write down all that info.
I have an HP Pavilion 553w that is 7 1/2 years old, running windows xp home edition version 2002 sp3, 2 gbs of ram, AMD athlon(tm)XP 2100+ 1.73 GHZ, bios version/date Phoenix Techologies, LTD AM35308, 10/07/2002 (Phoenix-AwardBIOS CMOS Setup Utility) SMBIOS 2.3, BIOS Core Version V6.0, BIOS Revision 3.08 10/7/2002.
I know my computer is ancient and I probably should have updated my BIOS, as it is out of date.
Also, after starting up my computer I noticed my time and date is not correct and as of lately have to adjust the time and date to the correct time and date.
I did some research and came across some possible reasons:
1. RTC battery (CMOS battery) may need reseating on motherboard.
2. The battery has become corrupt.
3. BIOS version may be out of date.
My computer is really taking longer than usual to startup and images of icons take longer to display, which may be a sign of the symptoms I listed above.
My computer doesn't have any malware whatsoever, clean as can be.
Any help or advise will be truly appreciated.
Jboman
This question was solved.
View Solution.

Jboman,
There is not need to save CMOS settings unless you changed the default BIOS settings. A bad CMOS battery will not preserve the settings.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

User disabled until start date not getting ROs provisioned via AP

Here's the situation: I have a user in OIM that is disabled until start date. When the start date rolls around, and the job "Enable User After Start Date" runs followed by "Evaulate User Policies," the user is correctly enabled and the correct role gets assigned but the access policy associated with that role does not appear to get triggered so the APs resources are not assigned. However, if a user is entered the same way (via HR recon) but is on or after its start date, then the role gets assigned, the access policy fires, and the ROs are provisioned just fine.
I have noticed that if a user is moved from disabled to enabled, then the membership rules fire and any roles associated with the rules get assigned but in the DB the field USR_POLICY_UPDATE remains null. If I update that field with a '1' and re-run "Evaluate User Policies," the resources are provisioned correctly.
I am wondering if anyone has seen this before or has a suggestion as to how to resolve this.
Thanks,
Stephen

Thanks for the suggestion. As it turned out, I did not have Retrofit checked but unfortunately that did not resolve the issue. The behavior remained the same after checking and re-running 'Evaluate User Policies'.
I may have a workaround for this issue that I am in the process of implementing. I'm creating a job that will run right before 'Enable User After Start Date' that will update the USR_POLICY_UPDATE field to'1' if the status of a user is 'Disabled Until Start Date.' Then the user will get enabled, assigned the appropriate roles via rules, and 'Evaluate User Policies' should run and now find this user and apply the access policies.
Anyway, seems like there should be a simpler answer so I'll keep checking here if anyone has one. I'll also update if the above workaround works.
Thanks,
Stephen

Sched.start date not allowing on week-ends for fwd scheduling process order

Hello Experts,
For a process order & scheduling typr forward/in time if I take sat or sunday as a start date then if I click on schedule, system changes it to previous workin day (friday). But however if i select backward/in time scheduling type & put week ends as finish day then system does not change this date.
How can I make system to allow schedule start date on week ends also for forward/in time scheduling type. in a factory calendor sat & sunday are holidays. while for work center, calender sat & sunday are marked as working days.
Thanks for advance,
Vijay.

Hi
it depends upon client requirement.you must have defined the holiday calender as well.if you select the public holidays in your factory calender.then system will allow you to do your daily transctions on public holidays as well and vice versa.so better go with all options selected .and plz check at your end
plz revert back if it works
Regards
Anupam Sharma

Dateofbirth and start date not same for infotype 2

Hi Gurus,
Recently we have applied supportpacks for 4.6c in development.I am testing for hiring action.What i observed is end date for these infotypes changed to 31.12.1999 instead of 12.31.1999 and in infotype 2 employee dateofbirth and start date is not same which is suppose to be same.Startdate of infotype 2 is taken as employee hire date.Infotype 2 has timeconstraint 1.when i am trying to enter date of birth, for some dates it give me an error invalid date. what could be the cause?Help is appreciated
Thanks

Hi,
Please go to SU3 and check for the Date Format under the Defaults tab.
Hope this helps,
Reward points if helpful,
Thank You,

Billing Plan Start Date not copied to Sales order from Service Contract

Hi
We are developing a process of Creation of Service Contract and then a order confirmation.
Now based on the Order Confirmation will bill based on the Bill Plan.
The Bill plan start date in contract header is not flowing to Sales Order header while creating with reference.
Then navigating to Header Billing plan and if we input the date the billing plan dates are displayed.
We checked the copy control settings and seems like the date is not copied.Is this a standard behaviour.
If so then do we have any work arounds to achieve the same. Because the contract start date can change before confirmation.
So business wants a sales order confirmation to be created after contract creation and bill periodically as per the Sales order instead of contract.

Hi,
Appreciate ur quick response. But instead of FKDAT i need the FPLA-BEDAT to be flowed to Billing Plan.Right now iam entering the following date manually at header.Instead if it copies from Contract header then manual entry could be neglected.
Is it possible with the same routine to code with the above mentioned FPLA-BEDAT.

Sampled Data not correct

I developed a VI to sample three different chanels from my DAQ board. I set up the channels in MAX and they read correctly there, but when I am aquireing data in Labview I get a small voltage value from one of my transducers when it should be almost zero. The othe transducer which is about the same reads correctly. Atached is the basic acquisition set up in Labview 6.1.
Do I need to change my settings in Max?
The transducers are basic pressure sensors with a digital display. The output 0 to 5 volts DC.
Attachments:
Datain.vi ‏48 KB

My last DAQ channel is still incorrect. I changed my order of daq channels going into the array and the last channel is incorrect. Why does the last channel start out reading the correct value and then become incorrect when the voltage is decreased to a low value? I am wondering if it is a timing issue? I created a simple vi (picture attached) to verify that the last daq channel becomes incorrect when going from higher voltage to very low voltage.
The quick and dirty fix would be to sample an additional channel that is not needed and make it the last input since the last input is the only one that reads incorrect.
I tried increasing the acquisition rate and this did not help either.
I have a DAQCard-6024E with a SCB terminal block running Labview 6.1. Any help would be appreciated. The first DAQ traditional MAX channel is a thermocouple the second two are 0 - 5 volt DC Referenced single ended inputs.
Attachments:
DaqTest.jpg ‏59 KB

Settling Rebate Agreements with Validity Start Date not Start of the Month

Hello Experts,
I am currently trying to settle a rebate agreement with validity dates November 20, 2011 to December 31, 2011. However, after the credit memo is created, I noticed that the Service rendered date is today's date, but I expected it to be the same as my Settlement Date = November 30, 2011 (a month-end). Please advise if this is normal. If not, please advise how to correct the automatic entry of dates.
Thanks,
M

Hi
Kindly let us know what is the rebate agreement type that has been used for which you are facing problem and for which rebate agreement type you are getting the month end date.Check wheather scale basis is B(Value scale) has been maintained or not for the rebate agreement for which you are getting problem.So check the differences between the two rebate agreement types.As The service rendered date of the invoice line item is used to determine the validity of a rebate condition record
Regards
Srinath

Photo dates not correct in iOS 7, how to correct this?

Working with iOS 7.0.2 on iPhone 5s. The new screens for showing foto's is nice and handy, but....a lot of pictures are now presented in the wrong year, how can I correct this per picture? With the former iOS version, this became not visable, as there were no years, dates etc. showed.
Maybe it's simple to correct....but I didn't find out yet....

Any way to resolve this?

MSS iView Salary Data Not Correct

Hi all,
In the MSS salary data iView, it's showing the salary which is reading from infotype 8. But for some countries, for example Taiwan and Japan, since the salary number is chopped off with the last two digits. For example, the number in infotype 8 is 1234, it will show up as 12 (rounded from 12.34). Does anyone have a idea why this is happening? did we miss any configuration?

Hi Bala,
Thanks for your quick help. Yes, we do realize that it's not portal issue. And we know as a fact that the decimal places defined for Taiwan and Japan are always as "0" in TCURX. But we could not change it here because it will affect all program running based on this table. We do believe that anywhere else in ECC, based on the decimal for each country, the program will handle the conversion seperataly, so it will show the correct data on the UI. But looks like either we are missing configuration in MSS side or this is a bug from SAP. If it's a bug, I was hoping there's a note to fix it and someone here has experienced the same problem and knew the note.

Video creation date not correctly read?

This might be a bug--it appears to me that Bridge is not reading the EXIF "date/time original" field for avi files--instead it is reading the MS windows dates which is a bad thing because any time you copy a file, these dates get changed. Even just moving a video file to another hard disk will destroy the MS windows "creation date". However the EXIF dates are untouched.
I'm using exiftool to read the metadata.
Bart

iPhoto uses EXIF metadata for it's creation date and videos do not have that metadata. You can use the Photos ➙ Adjust Date and Time.... menu option to change the date to whatever you need to get it to sort in the right order when sorted by Date.
OT

PP DataSource 2LIS_04_P_ARBPL - Incorrect extraction of latest scheduled start dates (SSAVD)

Hi experts,
we use the SAP Business Content Standard DataSource 2LIS_04_P_ARBPL "Work Center View PP" and need the latest scheduled start date each production order operation.
In the production order operation overview (t/code CO03) on the ERP-side we have the expected latest scheduled start (Source AFVGD-SSAVD)
But in the DataSource 2LIS_04_P_ARBPL (PSA-Table) we become the incorrect latest scheduled start dates (DataSource field SSAVD)
Any ideas or experiences why the latest scheduled start date not up-to-date?
Many thanks and best regards,
Michael

Hi,
I have tested the scenario again...
At the header level of test production order 1000381 I have changed the basic dates (Start/End) from 22.04.2014 to 24.04.2014.
As a result the start dates at operation level also changed...
After the above changes I have extracted the Data. The Delta-Queue (RSA7) for the relevant DataSource 2LIS_04_P_ARBPL looks nearly good.
For the both operations 20 and 30 the delta update for the field "Latest start date" (SSAV) works correct. But the delta update for the first operation "10" not processed.
Is it possible that the delta update only works for specific system status? Or any other ideas?
Many thanks and best regards,
Michael

MS Project 2010 Start dates change automatically

Hi,
I hope someone can help with this project problem, its driving me insane!
I have a set of activities which have a start date of 01/09/2014, there are no predecessors to these tasks but there are successors, and a date constraint date (the project start date is 16/06/2014, and these tasks cannot start until 01/09/2014).
When I mark the tasks as 100% complete the dates do not change (as expected), however once I have saved the file and closed it, something weird happens. When I reopen the file the start date (not baseline start) of these tasks has changed to the project
start date (16/06/2014). The % complete is still reading 100% complete and the task finish date has remained the same.
These tasks are milestones and have no duration.
Another aspect that I have discovered is when I take out the % complete (and it returns to 0%), the start dates change back to 01/09/2014.
Can anyone tell me if I have a setting somewhere which I need to change as its driving me insane, the more tasks that are marked as 100% complete, the more tasks I have that change to the project start date, so the problem is getting worse as the days go
on!
Any help would be appreciated.
Thank you!

Do you have the Project Status date set correctly, and is it set for the correct date? If its set back in June and under File, Options, Advanced the Move flags are selected you would get the behaviour you mention.
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz

Notification dates not copying in order

Dear All,
My notification required end and start date not copying in Order Basic Start and Finish date.
but priority it is copying well.
Kindly suggest.
Sameer

Sameer,
Check whether user exit, IWO10012 Maintenance order: Priority treatment on central header has been Implemented in your system. This may be causing the dates to be changed as per the logic maintained within.
Regards
Narasimhan

Waranty start date not correct

Similar Messages

Maybe you are looking for