Warcraft 3 Frozen Throne Freez & Time won't save in Vista

Hi Guys,
I have a 24" 2.4, the computer froze when I try to quit WC3, this has happened twice already. Is there a fix.
Also, I have vista installed with bootcamp, whenever I boot into Vista, the time would be wrong. I keep changing it but it won't save.

Argh! I spoke too soon! I had powered down the PC before I went to bed, last night. Upon reboot, this morning, I was greeted with the all too familiar F1/F2 halt screen! I needed to go back in and set my CMOS settings back to what I needed (date/time/boot order, etc).
The only thing lowering the speed of the memory seems to have accomplished is that the PC no longer power-cycles on F10/save in CMOS. Powering off the PC brings back the issue (I am going to have to test whether going into hibernate may be a way around it...but, I doubt it.
So...is anyone else having these memory issues? Should I even have BIOS 1.2 on this SLI board (it's what MSI has installed on both boards...the one I shipped to them and the re-certified one they sent me)...I keep hearing that 1.1 is the latest?
Are there any other memory settings I could try to use to permanently get around this problem?
Is anyone else using this same memory with no problems (I noticed that the 2GB Corsair memory is not even listed in the manual that came with this MLB)?
Should I just buy new/different memory, and if so, what brand/type seems to be the most stable?
Any help is appreciated. So far, this MSI board (my 1st) has been a major disappointment and cause of frustration.
Rob

Similar Messages

Quick Time Won't Open in Vista

Quicktime Quicktime Pro won't open in Vista:
I can't open Quicktime by starting the application. After starting Quicktime a button appears in the Vista system toolbar, but no window opens. If I mouse over the Quicktime button in the toolbar, a preview window appears, but I can't open the window. If I right click, I have the option to close, minimize, or move the quicktime window, but the maximize option is dimmed. If I run Task Manager, Quicktime is running. I can not "switch to" the window, but I can force the application to quit.
The same issue occuredfter a new install of Quicktime, before Quicktime Pro was installed and since Pro was installed. To Register Pro I could only find Quicktime in the 32 Bit Control Panel while the system is running 64 bit.
I have followed the guidelines on the apple web page http://support.apple.com/kb/HT1926 uninstall iTunes and Quickitme, re-install and then re-install Quicktime only.

When I click on it, it flashes a message reading, "Please Install Apple Application Support."
Apple Application Support is needed to run QuickTime. There's some information on the relationship between the two programs in the following user tip:
[QuickTime for Windows and Apple Application Support|http://discussions.apple.com/thread.jspa?threadID=2353984]
Is Apple Applications Support currently showing as being installed in your Add or Remove Programs Control panel?

Mozilla Thunderbird hangs all the time, won't download messages, won't save messages,

Hi,
I have been running Mozilla Thunderbird since the beginning of the year.
I have always had problems, but it seems to be getting worse.
It won't download messages, it won't save messages at the time you send them, instead a window runs for ages saying:
"Copying messages to saved folder"
Then it says
"There was an error saving the message to sent, retry?"
You hit cancel and then it comes up with:
"The message was sent successfully, but could not be copied to your Sent folder. Would you like to return to the compose window?"
Then there is the problem of downloading messages, basically it doesn't all the time, it hangs and I have to either restart the computer or download them on my iphone.
It can take upwards of 20 minutes to download a single message.
I had a look at the "Activity Manager" and it seems frozen as well.
It also sends up the messages that the server has been disconnected or timed out.
I've had a look through the trouble shooting guide but can't seem to progress this.
Any suggestions will be greatly appreciated!
I am running the latest version, and have Windows 7, 64 bit.
I am fast of the opinion I'd better shell out some cash and get Windows Outlook as Thunderfox is a nightmare.
Many thanks,
Adrian

Thunderbird support is over here. <br />
http://www.mozillamessaging.com/en-US/support/ <br />
or here: <br />
http://forums.mozillazine.org/viewforum.php?f=39

Warcraft III, The Frozen Throne - can't install it on 10.5?

+Hi - I am posting this question again since the other thread was marked as "answered".+
here we go:
I am having problems with *Warcraft III, The Frozen Throne* and I do not really understand what you did to get it to work.
Reign Of Chaos works fine, also on Battle Net, but I can't install the add-on The Frozen Throne: the installer loading time is awfull long, and when it finally loads (after 2 or 3 minutes), when I click on the install-button, it tells me to insert the Warcraft III CD. I know that the CD I have is fine (installed it on other machine).
*How do I get it to work with Leopard 10.5*?
Th x for your help.

I had the same problem, I fixed this by creating a mountable .cdr file using "burn" mounted it and installed if from the image file, after that whenever you want to play just mount the .cdr file and play non need to insert the cd anymore.
burn = http://www.versiontracker.com/dyn/moreinfo/macosx/30120
hope that works for you, let me know
cheers
tt.

Mac Sleep Timer (through 'Energy Saver' in System Preferences) won't work

Hello,
I have a MacBook (13-inch, Mid 2009) running Mac OS X Snow Leopard 10.6.3,
and it has been installed with the latest software updates possible.
(The latest update is the 'Security Update 2010-003')
Previously I was using Mac OS X Leopard 10.5 on my MacBook,
and I can vaguely remember the timed computer sleep through Energy Saver would work.
That is, when the counter's time matches the amount of time I specified (e.g. 10 minutes), the computer enters sleep mode and displays a pulsing power light.
After upgrading to Snow Leopard I can barely remember the scheduled computer sleep will work as I don't really notice how it sleeps / I will shut down my MacBook before I go to bed.
==========
However, last night I was really tired and slept in front of my MacBook unconsciously.
When I woke up, I found that my MacBook didn't display a pulsing power light but a continuously-growing power light.
I tapped the trackpad and the display turned on, so I knew that my MacBook didn't go to sleep a whole night.
*What that means is that the Sleep Timer (through 'Energy Saver' in System Preferences) won't work.*
But the timed display sleep DOES work.
==========
After spending a whole day Googling,
I found that there are plenty of people suffering the same problem as me, although their Macs and OSs vary.
I also found an official support page from Apple concerning the related issue:
Mac OS X: Why your Mac might not sleep or stay in sleep mode
http://support.apple.com/kb/HT1776
I tried the following methods but still can't resolve the problem:
_- boot my MacBook in safe mode_
_- use the 'Disk Utility' to repair Disk Permissions through booting my MacBook from the Mac OS X Snow Leopard Installation DVD_
_- reset NVRAM (Intel-based) (as PRAM is used by PowerPC-based Macs)_
_- reset SMC (System Management Controller)_
NONE of the above-mentioned methods can resolve the problem.
Althought I am sure that the Spotlight isn't indexing the hard drive, and I just start my computer and do nothing and wait for the scheduled computer sleep, the scheduled computer sleep just won't work.
In the other Mac forum, I saw someone suggest installing an application called PleaseSleep:
http://www.dragonone.com/products/macosx/pleasesleep/
It works.
But I really want to find out what caused this problem as this is a function shipped with Mac which is expected to work normally.
What's more, Apple is claiming to be a green Apple, right?
==========
Here's the log taken from 'Console':
- Sleep by closing the lid of my MacBook:
Apr 18 13:21:05 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback WILL sleep
Apr 18 13:21:05 Michael-Leungs-MacBook PleaseSleep[288]: Sleep notification received from the system
Apr 18 13:21:07 Michael-Leungs-MacBook configd[37]: network configuration changed.
Apr 18 13:23:21 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback will power on, Currenttime:4/18/2010 1:23:21.028 PM - Waketime:4/18/2010 1:23:19.410 PM = Deltatime:1.618421972
Apr 18 13:23:21 Michael-Leungs-MacBook loginwindow[25]: handleUnlockResult, Currenttime:4/18/2010 1:23:21.579 PM - Waketime:4/18/2010 1:23:19.410 PM = Deltatime:2.169138968
Apr 18 13:23:23 Michael-Leungs-MacBook configd[37]: Sleep: Success - AC 98 - Clamshell Sleep
Apr 18 13:23:23 Michael-Leungs-MacBook configd[37]: Wake: Success - AC 98 - EC LID0
Apr 18 13:23:23 Michael-Leungs-MacBook configd[37]: Hibernate Statistics
Apr 18 13:23:23 Michael-Leungs-MacBook PleaseSleep[288]: Wake notification received from the system
- Sleep by manually clicking the Apple logo in the upper left corner of the screen -> 'Sleep':
Apr 18 13:31:46 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback WILL sleep
Apr 18 13:31:46 Michael-Leungs-MacBook PleaseSleep[288]: Sleep notification received from the system
Apr 18 13:31:49 Michael-Leungs-MacBook configd[37]: network configuration changed.
Apr 18 13:32:04 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback will power on, Currenttime:4/18/2010 1:32:04.033 PM - Waketime:4/18/2010 1:32:02.720 PM = Deltatime:1.313067079
Apr 18 13:32:04 Michael-Leungs-MacBook loginwindow[25]: handleUnlockResult, Currenttime:4/18/2010 1:32:04.589 PM - Waketime:4/18/2010 1:32:02.720 PM = Deltatime:1.869303048
Apr 18 13:32:06 Michael-Leungs-MacBook configd[37]: Sleep: Success - AC 98 - Software Sleep
Apr 18 13:32:06 Michael-Leungs-MacBook configd[37]: Wake: Success - AC 98 - OHC1
Apr 18 13:32:06 Michael-Leungs-MacBook configd[37]: Hibernate Statistics
Apr 18 13:32:06 Michael-Leungs-MacBook PleaseSleep[288]: Wake notification received from the system
- Sleep by manually pressing control + eject, and the press 'Sleep':
Apr 18 13:34:17 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback WILL sleep
Apr 18 13:34:17 Michael-Leungs-MacBook PleaseSleep[288]: Sleep notification received from the system
Apr 18 13:34:46 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback will power on, Currenttime:4/18/2010 1:34:46.080 PM - Waketime:4/18/2010 1:34:44.720 PM = Deltatime:1.360466003
Apr 18 13:34:46 Michael-Leungs-MacBook loginwindow[25]: handleUnlockResult, Currenttime:4/18/2010 1:34:46.564 PM - Waketime:4/18/2010 1:34:44.720 PM = Deltatime:1.844347000
Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: PMConnection AirPort configd plug-in com.apple.powermanagement.applicationresponse.slowresponse 566 ms
Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: bootpsessiontransmit: bpf_write(en0) failed: Network is down (50)
Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: DHCP en0: INIT transmit failed
Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 567 ms
Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: network configuration changed.
Apr 18 13:34:48 Michael-Leungs-MacBook configd[37]: Sleep: Success - AC 98 - Software Sleep
Apr 18 13:34:48 Michael-Leungs-MacBook configd[37]: Wake: Success - AC 98 - OHC1
Apr 18 13:34:48 Michael-Leungs-MacBook configd[37]: Hibernate Statistics
Apr 18 13:34:48 Michael-Leungs-MacBook PleaseSleep[288]: Wake notification received from the system
- Sleep by _turning on the application called 'PleaseSleep' based on the settings from 'Energy Saver'_:
Apr 18 13:37:22 Michael-Leungs-MacBook PleaseSleep[288]: Application is enabled
Apr 18 13:37:29 Michael-Leungs-MacBook System Preferences[1136]: * AGCAttach() failed
Apr 18 13:37:31 Michael-Leungs-MacBook [0x0-0x58058].com.apple.systempreferences[1136]: Couldn't find any matches.
Apr 18 13:38:23 Michael-Leungs-MacBook PleaseSleep[288]: Checking sleep conditions...
Apr 18 13:38:23 Michael-Leungs-MacBook PleaseSleep[288]: Going to sleep...
Apr 18 13:38:23 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback WILL sleep
Apr 18 13:38:23 Michael-Leungs-MacBook PleaseSleep[288]: Sleep notification received from the system
Apr 18 13:38:56 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback will power on, Currenttime:4/18/2010 1:38:56.042 PM - Waketime:4/18/2010 1:38:54.720 PM = Deltatime:1.321902931
Apr 18 13:38:56 Michael-Leungs-MacBook loginwindow[25]: handleUnlockResult, Currenttime:4/18/2010 1:38:56.571 PM - Waketime:4/18/2010 1:38:54.720 PM = Deltatime:1.850627959
Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: PMConnection AirPort configd plug-in com.apple.powermanagement.applicationresponse.slowresponse 707 ms
Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: bootpsessiontransmit: bpf_write(en0) failed: Network is down (50)
Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: DHCP en0: INIT transmit failed
Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 708 ms
Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: network configuration changed.
Apr 18 13:38:58 Michael-Leungs-MacBook configd[37]: Sleep: Success - AC 98 - Software Sleep
Apr 18 13:38:58 Michael-Leungs-MacBook configd[37]: Wake: Success - AC 98 - OHC1
Apr 18 13:38:58 Michael-Leungs-MacBook configd[37]: Hibernate Statistics
Apr 18 13:38:58 Michael-Leungs-MacBook PleaseSleep[288]: Wake notification received from the system
- If I disable 'PleaseSleep' and only depend on the non-working 'Energy Saver', nothing happens.
==========
Looking forward to your replies! Thanks in advance!

Found this discussion by googling "com.apple.systempreferencescouldn't find any matches"...
One month ago I bought a brand new Macbook Pro 13", and after a couple of weeks I realized it wasn't sleeping on its own when it should, per the system preferences. (I did sleep when I chose "Sleep" in the menus or closed it... It just wouldn't sleep on its own, while open.) What was extra frustrating was that it was intermittent... It would sleep on its own maybe 1/3 of the time, but other times it would NEVER go to sleep. I deleted PowerManagement.plist, reset the SMC, etc... No luck.
I took it to the "geniuses" at the Apple Store, and the guy took all of five minutes trying to diagnose the problem. When my MBP wouldn't sleep on its own, he promptly replaced it with a new one. That was nice, but I actually would have preferred that he diagnosed and fixed it. (I think the store was so swamped with people coming in for service that day that they were doing anything they could to close cases and get customers out of there ASAP.)
Now, sitting here with my 48-hour-old MBP, I still have the problem. The other one was so new that I had barely put anything on it yet. The only applications I had put on it were MS Office for Mac 2011, Firefox, Chrome, and Adobe Flash Player. I've put Office and Flash Player on this one, but not yet Firefox or Chrome. That's it. No other customization or fancy business.
I looked into the Console just now, and I see the "Couldn'tfind any matches" entry popping up again and again. The last three seemed to pop upright around the time when my MBP should have gone to sleep on its own, but not down to the second, so it's hard to definitively point at that and say it's it for sure.
They need to fix this!!

[x86_64] Warcraft 3 Frozen Throne annoying resolution bug

Hi people
I just reinstalled my Arch, was i686 and is now x86_64.
Before the change, I had War3 Frozen Throne installed via Playonlinux and everything worked fine.
But since the reinstall, I have this strange bug: when I launch the game and am in the menu, if I move my cursor to the right, the screen begins moving to the left as soon as it is near the menu, as if the resolution wasn't the one I see.
I tried:
- several resolutions, but nothing changes.
- opengl option in the launcher, and the resolution is larger than the screen, so I understand why it moves to the left when I move my cursor further than the screen border. And if I choose a smaller resolution, it's as if it zommed in o_O
- uninstall/reinstall of the game, last game patch or the install version (which is the download version from my battle.net account)
Does anyone have an idea about what is going on ?

hmm sounds like you have got the same issue like me:
http://bbs.archlinux.org/viewtopic.php?id=68768
i think the lib32 libs are broken, but thats my oppinion. i posted also in the german forums, but there is no solution for it yet. with gentoo 64bit, same configuration, i do not have this problem (so i am using gentoo now).
please try the following:
install a 32bit chroot, xorg + wine inside the chroot and run warcraft inside the chroot.
are you using nvidia-drivers? which card do you have?

Since updating ITunes sofwr some time ago, Used to be able to go to ,"File", "Get Info" and dragdrop my picture into the artwork box,click OK.No longer!Won't save/displayWHY?

Since updating my Itunes software some time ago, I've not been able to add my own artwork,ie album covers, to my own personal albums.Used to be able to go to "File," "Get Info" and drag/drop my photo into the artwork box, hit save/OK and Voila! No longer and it's Really frustrating. It will let me drag it there but it
won't save it or display it. (Why they go and break somethin' that was working fine?....just an aside) What must one do now to display their own artwork for albums that are non purchasable online?

Winter 7 wrote:
Thanks again. Though I'm not really tech savy, I don't believe this issue has to do with Tags.
it has everyrhing to do with tags.
The artwork is stoed in the Artwork tag field.
Since WAV files do not have tags, there is no where to store the tags.
If you use iTunes to get artwork for WAV files, it puts themn into the AlbumArt folder adn links it to the correct files via the iTunes library.itl file.
All other formats (MP3, AAC, AIFF, Apple Lossless) have na artwork tag to store the artwork in the media file itself.
in the past, to add my own personal artwork,
Not to WAV files. You must have imported them as a different format.

HT5706 My Apple TV is frozen on the time and date setting and then it goes to the screen saver I tried changing the batteries on the remote and it still doesn't make a difference someone help

My Apple TV is frozen on the time and date setting and then it goes to the screen saver I tried changing the batteries on the remote and it still doesn't make a difference someone help...has anyone else had these problems?

Hi i ran into the same problem Ithoght it was the control, i changed the batteries the the control, and stil did not work, in the same connection (network and everything) i installed a new one and it worked perfectly, i can deduct the unit is nit working properly

I have used Image Capture to scan images/documents and then saved them as either PDFs or PNG files. For some reason, just this past week Image Capture will no longer save the file. It scans, and the Scan Results window pops up, but it won't save file.

I have used Image Capture to scan images/documents and then saved them as either PDFs or PNG files. For some reason, just this past week, Image Capture will no longer save the file. It scans, and the Scan Results window pops up, but it won't save file.
The file name has no special character in it, just letters and no spaces.
I have done this in the past and it has worked, but now it will not.
I have not upgraded any software, that I am aware of.
After scanning, the Image Capture pops up the Scan Results with the file name in the window, but neither the Scan Results nor the Image Capture window responds to inputs. The Image Capture window is frozen, with only the "Overview" and "Cancel" buttons active (but non-responsive).
Is this a software issue or a scanner hardware issue? I am using a HP Photosmart C6200 series printer/scanner on a network using a Time Capsule airport.
Thanks.

I had the same problem.
Got a 90% fix. Apparently the Mavericks preferences won't work with Yosemite, so I just deleted the Image Capture preferences.
Unfortunately, the "Scan to" folder seems to be permanently set to the Pictures folder.
1. Quit Image Capture
2. Go to Finder > Go > Home, which opens up your home folder (named after your user name)
3. Open Library > Preferences > com.apple.ImageCapture.plist - Drag this file to the Trash
4. Start "Image Capture", click "Details" and change all your settings as you prefer
5. Quit and restart "Image Capture". Notice it remembers all your settings except "Scan to" folder. It insists on saving to "Pictures".
That's as far as I was successful. I tried changing the "Scan to" folder to "Desktop", but on launch, Image Capture always sets it back to "Pictures".
This is what I tried:
6. Download and install "Pref Setter" from http://www.nightproductions.net/prefsetter.html
7. Quit "Image Capture". Right-click on "com.apple.ImageCapture.plist" and open with Pref Setter.
8. Search for "Pictures", which finds "~/Pictures" (the tilde character at the start means your home directory).
9. Double-click on "~/Pictures" and change it to the folder you prefer. I like "~/Desktop"
10. Choose File > Save then Quit from Pref Setter. Note that re-opening the plist file still shows "~/Desktop"
11. Start up "Image Capture" -- on startup, "Image Capture" sets "Scan to" folder to "Pictures"
I consider this a bug.

After AW 6.0 update to 6.2.9 won't Save files

After updating Apple Works 6.0 to 6.2.9, the updated program will not allow me to save any files. After choosing my Macintosh HD as the "save to" location, I am unable to Save. Instead, a small wndow appears stating "Cannot find volume." I had previously been running AW 6.2.9 for a long time, but had to reformat my HD recently and re-loaded AW 6.0, then tried my 6.2.9 update when this problem surfaced. I tried UNINSTALLING these and re-installing several times, but I always have the same problem now. I also have to force quit AW most of the time. However, the OS9 version runs fine and saves fine, no problems with it. Help!!

Thanks Peggy for your prompt suggestions. I went ahead and used Disk Warrier to rebuild my HD. I also used Disk Utility to repair Permissions. I also trashed preferences from AW for both systems 9 and 10. Same problems! I re-installed AW from the beginning. Same problems! I also find I cannot open any of my AW files directely- a dialog says "file is locked or in use" and "open a copy." When I open a copy, it still won't Save! I went to Get Info- all my AW files have "read only" and the owner is "unknown." I clicked the locked padlock on unknown, unlocked it, reset it to my normal owner name for the computer, changed the file to "read and write" and clicked "open all files with this application" also. It will the open that one file without asking me to open a copy. But still won't Save. And all my other AW files are still set to "unknown" and are still padlocked in the "read only" mode. What the heck do you think happened here? This was after I had the Apple Store help me to reformat a copy of my HD because it had frozen one day and couldn't be retrieved with Disk Utility or Disk Warrier. They couldn't tell me why this had happened. All of my other applications are just fine. Any help would be GREATLY appreciated! Mark Schubert, Phoenix, AZ

Won't Save, Not Enough RAM

I have an 8GB RAM Macbook Pro Retina 13 inch. Recently, my photoshop cc won't save files that are only 100mb because it says I don't have enough RAM. I have 8GB of RAM and it has never done this even when I run all the suite at once.

These days 8 GB of RAM is considered about the bare minimum for Photoshop.
The message can be triggered by too little HD space left too, especially in a Mac Book laptop with only your boot drive for both Photoshop's scratch file and the Swap files of the OS X.
The rule of thumb I follow to figure out scratch space says to figure on 50 to 100 times the size of your largest file ever multiplied by the number of files you have open. I have seen the scratch file exceed 800 GB once, an admittedly rare occurrence, but it often exceeds 200 GB when stitching large panoramas and the like.
As an example—and stressing that I'm aware that others have even more scratch space than I do—I keep two dedicated, physically separate hard drives as my primary and secondary Photoshop scratch disks and a lot of GB free on my boot drive for the OS. I also have 16 GB of RAM installed.
Additionally, if you only have a single HD, i.e. your boot drive, you'd need it to be large enough to accommodate both the swap files of the OS as well as Photoshop's scratch.

Boot Camp Assistant Can't Move Files? Image won't save ('resource busy')

I've been trying to set up boot camp and every time I go to partition the drive I get this message:
Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again.Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again.
My drive is already set up as an OS Extended (Journaled) volume. I went to try to save a disk image and it won't save b/c it always says resource is busy. Well obviously I need to use the computer to back up it's own hard drive so of course it's busy.
Any help is greatly appreciated. Thanks.

Are you sure you had enough free space on the drive for the Windows partition you tried to create? Have you tried repairing the drive?
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Voice Memos won't save my recordings?

I'm in college so I usually record my classes for further detailing, but I just recently discovered that Voice Memos just won't save my recordings like 2/5 of the time. I already lost like 4 important ones for the past 3 days.
The thing is that I see it recording, but it just doesn't save it, and it's just sitting there at 00:00:00 with the name tag I had put. I want to die.

- Does you iTunes library already contain a Voice Memos playlist? Some users have had to manually create it in order for the sync to occur.
- Also try resetting your iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

Photos won't save to camera roll

Since I installed iOS7, all the pictures I take with the camera won't save to camera roll. I see them in the lower corner of the camera but when I click on it, they are not in the camera roll. In the camera roll, I just have a bunch of pictures that I deleted months (or years!) ago. I uninstalled my profile and reinstalled it two or three times with always the same result.
All the settings are ok.
I installed the profile of a friend on my phone to test it and everything works fine with his profile.
Anyone can help me out with this issue?

bluetooth is an APPLE issue: they have blocked many of the 'normal' bluetooth features on 'other' handsets..
an example you may be thinking of is Sharing a photo via Bluetooth .. simple everywhere else, but can not be done on iphone
-you have to use it via an app such as iphoto, or send it attatched via an email, from the iphone.
stupid, annoying, yes.

My iPhone 4 refuses to save pictures and at some instances, delete my existing pictures. I take a picture, and then go to camera roll and look, but it doesn't show up. The same thing happens when I try to screenshot things; it won't save.

My iPhone 4 is severely making me mad. It won't save any pictures I take. I will take the picture, then go to view it in the Camera Roll, and it just won't be there. The same thing occurs when screen shotting things on my iPhone. Some times it won't even let me delete the existing pictures I had on my phone before this all happened. I will click delelte, then it will pause, and eventually close me out of the photos app. However, when I go to settings, it says I have 440MB of pictures on here somewhere. But I can oly see 3 pictures in the camera roll. Also, it says in the camera roll app that it is 'Restoring...' then just sits and loads and won't restore anything at all. HELP ME PLEASE. I have iOS 7.1 currently installed.

Have you Tried Clearing the The Cache in the Camera or Gallery in your Applications Area.. Go to Settings--> Applications--> Manage Applications--> Select All--> Clear the Cache in Both the Camera & Gallery Clearing the Data however might Clear you Pictures in your Gallery but if your Ok with it Give it a Shot,

Warcraft 3 Frozen Throne Freez & Time won't save in Vista

Similar Messages

Maybe you are looking for