Warehouse 001 does not exist to copy from in our ERP system

Trying to create a new warehouse in warehouse management. Went to the class SCM630, they said to copy from warehouse 001. But we don't have warehouse 001 to copy from in our ECC 6.1. Where can we go to acquire that warehouse 001 setup?

Hi,
can u provide little more details
It will become easy to solve u r problem
1) when did u get this error ?
( While running appln thru Portal or Web aplln Designer or Query Designer)
2) In which System u have created this Web template ZWEB_TEMPLATE_001 (BI / CRM / SEM) ?
After this Q we will able to reach the root cause of pblm
Reward Points !!!
Thanks

Similar Messages

[Solved] The requested object does not exist. (Exception from HRESULT: 0x80010114)

I have a 8 node cluster with Hyper-V, which will be 10 nodes when it's finally done.
Recently I've been try to add nodes and though that went fine, after about a week I could not open the Failover Cluster Manager anymore.
After some checking I found out that the latest added node was giving problems.
VM's on the node still run and function properly, but most Powershell commands result in a "The requested object does not exist. (Exception from HRESULT: 0x80010114)".
I can suspend the node with Suspend-ClusterNode, but draining roles was unsuccesful in one case.
In the other there were no VM's on the node so suspending went fine.
What I did find out was that when I tried to ping the node from another, proper functioning node, it took a while before the pinging started. It felt like the interface had to come back online on the problem node.
After that, I could add the cluster to the Failover Cluster Manager. However, Powershell commands still give a 0x80010114 error or a CIM error for when I use Get-NetAdapter.
A reboot resolves the problem, but only for about a week.
I know there is a topic with the same title already, but the wbemtest en rollup update "answer" is totally unclear to me why I should change something with wbemtest, or why to install updates that to me have nothing to do with this problem.
Before I did the ping test from a functioning node I pinged my DC and another node from the problem node just fine.
No waiting at all.
The cluster has three networks. Management (host only), Live Migration and iSCSI (also a VMSwitch for certain VM's).
I have no idea where to look. Evenviewer doesn't give me anything I can work with that I can find...

Hi,
Are you using the HP servers? It seems is the HP Nic team service was causing the issue, please try to
disabled the HP NIC team service from services and restarted the WMI service.
The related third party information:
Advisory: (Revision) HP ProLiant Servers - Systems Running Microsoft Windows Server 2012 or 2012 R2 May Experience a Memory Leak Up To 5 Mb/ Hour for Some NIC Teaming Configurations
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c04209163-2%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&ac.admitted=1401176219136.876444892.199480143
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I am getting this error message while accessing IT2002 Counting rule 2/01/001 does not exist Message no. 3H010

hi All,
I am getting this error message while accessing IT2002
Counting rule 2/01/001 does not exist
Message no. 3H010
Please guide ASAP
Regards,
Ayousef

Hi Ahmed,
Please go through the below mentioned thread.
scn.sap.com/thread/1187160
Regards,
Haranath

I purchased Premiere Elements 13. Elements does not support Windows Vista which is our operating system. I have Elements 12 and never had this problem.

I purchased Premiere Elements 13 & Elements does not support Windows Vista which is our operating system. I have Elements 12 and never had this problem. What are my options? Do you have a compatible program for WinVista similar to Premiere Element?

deniseu
This is not Adobe. Please do not duplicate threads. I have answered one of at least 3 of your threads currently appearing at the top of the list of threads in the Adobe Premiere Elements Forum tonight. Please see
I purchased Premiere Elements 13 and it is not compatible to Win Vista which is my operating system. What are my options?
New to Premiere Elements 13....it does not support Windows XP, Windows Vista, and OSX 10.7.
Also see
Removed features and unsupported file formats | Adobe Premiere Elements 13
In your other thread which I have cited above, I have posted a list of choices ahead of you. There is no workaround to get Premiere Elements 13 to support Vista, XP, or OSX 10.7 that has ever surfaced.
ATR

ORA-28367: wallet does not exist Re-Post From SQL PL/SQL

Hi all
Please Help about this
The Detail of Sqlnet.ora file
and Wallet is under wallet Directory
ENCRYPTION_WALLET_LOCATION = (SOURCE = (METHOD=FILE) (METHOD_DATA =
(DIRECTORY = d:\oracle\product\10.2.0\admin\ORA10DB\wallet)))
But i want to Alter Through SYS then Error Msg is Apr as
ALTER SYSTEM SET ENCRYPTION WALLET OPEN AUTHENTICATED BY "a0000000"
ERROR at line 1:
ORA-28367: wallet does not exist

ORA-28367:     wallet does not exist
Cause:     The Oracle wallet has not been created or the wallet location parameters in sqlnet.ora specifies an invalid wallet path.
Action:     Verify that the WALLET_LOCATION or the ENCRYPTION_WALLET_LOCATION parameter is correct and that a valid wallet exists in the path specified.
~ Madrid

The requested object does not exist. (Exception from HRESULT: 0x80010114)

Hello,
I have a 3 node cluster that is setup as active, active, passive. Two of the nodes report the following error when trying to connect to the cluster:
One of the active nodes is successfully able to connect the "Cluster" while the other two are not. The objects do exists in AD and the virtual cluster name has full rights of itself. I turned on DNS Client events logging and receive
the following messages on nodes that are able to connect to the cluster:
DNS FQDN Query operation for the name "ClusterNodeC" and for the type 28 is completed with result 0x251D
DNS Cache lookup operation for the name "ClusterNodeC"
and for the type 28 is completed with result 0x251D
DNS Cache lookup is initiated for the name
"ClusterNodeC" and for the type 28 with query options 0x40026010
Any help or direction would be greatly appreciated.
Thanks,
zWindows

Hi,
Sorry for the delay in reply.
Please try the following steps first:
Open Powershell as Administrator
Go to Start--> Run and type wbemtest.exe.
•Click Connect.
•In the namespace text box type "root" (without quotes).
•Click Connect.
•Click Enum Instances…
•In the Class Info dialog box enter Superclass Name as "__ProviderHostQuotaConfiguration" (without quotes) and press OK. Note: the Superclass name includes a double underscore at the front.
•In the Query Result window, double-click "__ProviderHostQuotaConfiguration=@"
•In the Object Editor window, double-click HandlesPerHost.
•In the Value dialog, type in 8192
•Click Save Property.
•Click Save Object.
Under properties find the property "MemoryPerHost" or any other ones you need to modify and double click it
Change the value from 512 MB which is 536870912 to 1GB which is 1073741824
Click Save Property
Click Save Object.
•Close Wbemtest.
•Restart the computer.
And if all nodes are Windows server 2012, install the following update rollup as well:
Windows RT, Windows 8, and Windows Server 2012 update rollup: August 2013
http://support.microsoft.com/KB/2862768
If you have any feedback on our support, please send to [email protected]

Can an iPhoto library that does not exist be recreated from the AlbumData.xml file?

Our iMac hard drive recently got corrupted and we hadn't backed up. (I know, I know, stupid, stupid, stupid. Won't make that mistake again!) The comptuer folk we took it too were able to recover most of the data on the drive, but my iPhoto library was not one of them. I don't have the library - the file is gone. But I do have the AlbumData.xml file. Is there any way to recreate the library from that file alone? I've tried it with iPhoto Library Manager and it wants me to have a default library for which this file is associated. I don't have that. Is there any way to get this data back? Some friends had trusted us with their wedding pictures. (I know, I know, stupid, stupid, and again, stupid. They won't make that mistake again!) I'd really, really, love to get them back if it's at all possible from this one file I do have.
Thanks in advance for any help!

No
iPhoto is a SQL database and you can only create the database (the iPhoto library) using a SQL editor - using iPhoto is the best
The database has many components and all of them must be there with exact names and in an exact structure to work
The only way you could rereate the library is from the photos (depending on the version of iPhoto you had they would have been in the originals or masters folder)
And yes - it is unfortuante but you have learned the most simple and basic lesson of computers - If you do not have a good current backup (I have multiple daily backups plus occasional offsite backups) you will eventually lose all of your data including your photos
LN

Error: Number range for object RESB does not exist

Hi
I'm trying to convert a planned order (to purch requisition) partially via trxn code MD04. Upon saving I get the above error msg. The complete text of msg is as follows. I've maitained the number ranges of all the objects specified in this error msg. Can somebody explain on how to overcome this problem?
Many thanks
BE
Error Msg Text:
Number range for object RESB does not exist
     Message no. 61501
Diagnosis
     The system cannot create a document for an MRP element if no number
     range or interval has been maintained in Customizing of MRP or if t
     number range you have maintained is not allowed.
     Below is a list of MRP elements that are affected:
     Number range object MRP element
     PLAF                 planned order (operative oder simulative)
     EBAN                 purchase requisition
     RESB                 dependent requirements
     MDSM                 simulative dependent reqmts (long-term plannin
     MDTB                 MRP list
Procedure
     Check the number ranges in Customizing. If you do not have the necessa
     authorization, please get in touch with your systems administration.

Hi
Thanks for the reply. But I have maintained the number ranges for matl. reservations/dependant requirements at OMI2. Here is the screen shot..Do find anything wrong with it? Pl advice.
NR Object                             MRES/DREQ
No.                          From Number            To Number          Curr Number          Ext
01                           0000000001               8999999999           380                    blank
02                           9000000000               9500000000           blank                  checked
RB                          9500000001               9999999999           blank                  checked
Number ranges for the plants are assigned to 01 (0000000001 to 8999999999).
thanks
BE
Edited by: Brian Elfie on Jan 10, 2008 11:27 AM

Source System Does Not Exist - Transport Problem

Hi
We have the next Landscape in BW 7.0 (Netweaver 2004's)
LRDCLNT300     is R3 DEV
LRQCLNT700     is R3 QA
LBDCLNT100     is BW DEV
LBQCLNT700     is BW QA
The connections are
LBDCLNT100 (BW Dev) use as source system        LRDCLNT300 (R3 Dev)
LBQCLNT700 (BW QA) use as source system        LRQCLNT700 (R3 QA)
In RSA1->TOOLS -> Conversion of Logical System Names
In Conversion of source system after the transport we have these entries
Source System                    Target System
LBDCLNT100 (BW Dev)         LBQCLNT700 (BW QA)
LRDCLNT300 (R3   Dev)         LRQCLNT700 (BW QA)
But when we transport an order from BW DEV to BW QA show the error "source system LRDCLNT300 does not exist"
Never made the conversion of source system after the transport.
Can you help us please.

Thanks Edwin
     I create a RFC for LRDCLNT300 (R3 Dev) in my BW QA system (Target System).
I try an order again but it didn't work, also I try to check 7.0 checkbox but I got the message "No entry exists for original source system LBDCLNT100 for 3.x object"
and I have to uncheck again.
I still have the same problem the objects are associated to R3 Dev, never make the conversion to R3 QA.

Graphical mapping issue with useOneAsMany if segment does not exist

Hi all
I have an issue with graphical mapping in an IDoc to file scenario. I need to have header level fields mapped to line item fields. Whether or not and how many source header segments of the same type exist depends on a qualifier (QUALF). This is generally working if I use the following graphical mapping:
if QUALF = 001 then <source> -> removeContext -> useOneAsMany -> splitByValue -> <target>
... with setting QUALF, <source>, and the second input for the useOneAsMany to the highest possible context node.
Nevertheless, if the segment with the qualifier 001 does not exist in the source then the mapping throws the error "Too few values in first queue in fuction useOneAsMany". Whatever I've tried, the mapping wants to execute the useOneAsMany statement anyway and I haven't found a way to omit this. Whether the target would be created with an empty value or not created at all would be secondary. Would eventually somebody have a solution to this problem?
Thanks in advance,
Daniel

Daniel,
try using mapWithDefault function before useAsmany
if QUALF = 001 then <source> -> removeContext -> MapwithDefault->useOneAsMany -> splitByValue -> <target>
I think it takes care even if the value occur in the contaxt or.
Babu

No range for trans/event type WA in year 2011 does not exist

Hi, All Gurus
while posting goods in MB1C,getting error 'No range for trans/event type WA in year 2011 does not exist'
while doing PGI,getting error 'No range for trans/event type WL does not exist'.I'm getting trained in IDES system.
Plz help me..
From
MVR

Hello,
And welcome to SAP SDN
System asking Number range for trans./event type WA for year 2011, as it not maintain in the system.
Now 1st set u201CWAu201D document type for material document & then u201CWAu201D document type for accounting document
Set for WA document type for material document
Use TCode: OMBT
In the Menu Click Group - maintain - again click Group-insert - Number Range Group Text (new material document)
& then enter
Year_From Number __ To Number.
2011_100000000____ 199999999
And now
Double click "WA"
and select check box of your "Number Range Group text of new material document
"and click Element/Group in the Application Bar ( you can see WA is assigned to Number Range Group text ) and Save.
Now use t.code: OMBA
Click u201CGoods Receipt Document Typeu201D
Next screen assign u201CWAu201D document type to t.code MB1C and save.
Set for WA document type for accounting document
Again Use t.code: OMBA
Click u201CFinancial Accounting Number Rangeu201D & enter company code u2026.and click change interval.
Now in next screen, click u201Cinsert intervalu201D
& then enter
Number range number__Year____From Number____To Number.
10__________________2011____200000000____ 299999999
And save.
Now again use t.code: OMBA
Click u201CFinancial Accounting Document typesu201D & next screen double click u201CWAu201D and you will have new screen and enter Number range u201C10u201D and save.
Similarly for WL
In t.code: OMBA check under automatic movements doc type for TCode VL01, VL01N, VL01NO, VL02,,VL02N,,VL03N, VL07, VL08, VL09, VL32, VL32N,,VL33N, VLMOVE, etc
Now, Set for WL document type for accounting document
Again Use t.code: OMBA
Click u201CFinancial Accounting Number Rangeu201D & enter company code u2026.and click change interval.
Now in next screen, click u201Cinsert intervalu201D
& then enter
Number range number__Year____From Number____To Number.
20__________________2011____200000000____ 299999999
And save.
Now again use t.code: OMBA
Click u201CFinancial Accounting Document typesu201D & next screen double click u201CWLu201D and you will have new screen and enter Number range u201C10u201D and save.
If you still face the any issue. Do revert back
Thanks & Regards
JP
NOTE KINDLY SEARCH FOR THE ERROR< BEFORE POSTING QUERY ON SDN

Number range for object BANF does not exist

Hi Guru's
I have been trying to convert the Planned orders to Purchase requisition and unfortunately the system consistantly giving me the error as reflected below despite changing the numbering range on the affectred documents. Please help.
Number range for object BANF does not exist
Message no. 61501
Diagnosis
The system cannot create a document for an MRP element if no number range or interval has been maintained in Customizing of MRP or if the number range you have maintained is not allowed.
Below is a list of MRP elements that are affected:
Number range object MRP element
PLAF planned order (operative oder simulative)
EBAN purchase requisition
RESB dependent requirements
MDSM simulative dependent reqmts (long-term planning)
MDTB MRP list

Hello,
You can define number range for Purchase requistions in OMH7 transaction agaist each number range number and you assign can assign these number range number to your purchase requistion document types in SPRP >> Materials management >> Purchasing >> Purchase requistion >>Define doucment type.
E.g for NB doc type number range number is 20
and in OMH7 number range number 20 has interval from- 2000000000 to 2099999999
same way
for RV doc type number range number is 21
and in OMH7 number range number 21 has interval from- 2100000000 to 2199999999
Regards,
Shailesh

Show parameter optimizer --- table or view does not exist

one of our programmer needs to have the ability to execute "show parameter optimizer". when he does he receives "table or view does not exist". when i run said command as system i do not receive said error. is the only way around this to grant him specific rights within the database? if so, what is the lowest level of rights i can grant him to allow a proper execution? can i grant rights to only said command? -a

It's a SQL*PLUS command and can't be used in PL/SQL block. You may use something like
select * from v$parameter where name like 'optimizer%'

View Paycheck Stub Error: (Form xyz does not exist)

Hi Portal Knowledgeable ones,
I am running EP 6.0 SP 13. My SAP target is ECC 5.0.
I have a problem in the ESS application. When I attempt to view the paycheck stub for any employee, the portal returns the error:
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Form ZCHK does not exist
Form ZCHK is our custom paystub form.
Thanks,
Kevin


Had to include form via IMG.

Source symbol does not exist

Hi!
when I am creating purchase order, system is giving error message source sumbol does not exist, and when I click on Proceed, system is taking to OT05.
But OT05, all the source symbols have been defined.
Planning levels has been maitnained in vendor/customer masters/GL accounts.
Planning level and source have been maintained.
Planning level is assigned to planning groups.
Define planning levels for Logistics.
can any one explain what could be the problem.
regs,
ramesh b

Dear Ramesh,
I am also facing similar issue while saving purchase order.
While saving purchase order getting error as 'Source symbol does not exist'.
If you have solution can you please share it with me.
Regards
Suresh Naidu

Warehouse 001 does not exist to copy from in our ERP system

Similar Messages

Maybe you are looking for