Warehouse Builder 11.2.0.2

Trying to find link for the client for Warehouse Builder 11g release 2. For microsoft window 64 bit. Looking in Oracle.com. Can you help point me to the correct link.
Thanks,
Pam

Pl see if MOS Doc 1377363.1 (OWB 11.2.0.3 Client Supported on Windows And Linux 64-bit Platforms) can help
HTH
Srini

Similar Messages

Problem in import of MetaData file in Oracle Warehouse Builder 9.2

My Problem is Related to Oracle WareHouse Builder.My system's configuration is following :-
Machine : P4
Operating System :Windows XP
ORacle : Version 9.2
Oracle WareHouse Builder 9.2
Ram :1GB
SGA Size :Approximately 650M
I have 2 MetaData files which I have to import into OWB.
First file's size is 9M.It got imported properly in 4 minutes without any error.
2nd File's Size is 30M.when
I start importing this MEtaData file.It goes upto 35% in Progress Bar.But after that it does not show any improvement.
I have left the machine running with this option upto 24 hours.
But nothing happened .It still shows only 35%.
I have checked log file/Trace file/Alert log files ,but there is no error in these files.
If any body have any solution about it,Please reply ASAP.I am stucked in this problem from last 7-8 days.
Waiting for reply
Thanks & Regards
Harvinder Singh

Thanks for your reply Igor.
As posted the OWB 10.1.0 software is running against a 9.2.0.8.0. database, so OWB still uses DBMS_JOB instead of DBMS_SCHEDULER in this database. In addition I already tested scheduling a simple job to run an OS command as suggested in note 365539.1 , and job scheduling is working fine.
There are no invalid objects in this database.
Yasmin

Scheduling in Warehouse Builder

Hi all,
There is an urgent requirement for scheduling in warehouse builder in my project. Can any one provide me the doucument for the scheduling processes in warehouse builder.

Hi
There's 2 ways I've done this:
1 Use the scheduler in OWB - you need to license the Enterprise ETL option but then it's just a case of reading the manual and setting it up. You will need to have Oracle Workflow installed which is a bit more
involved but there's lots of posts about that elsewhere on the forum.
2 Use DBMS_SCHEDULER to run your processes or mappings. Read this blog at Rittman Mead: [http://www.rittmanmead.com/2005/04/28/scheduling-an-owb-90492101-mapping-or-process-flow-using-dbms_job/]
Set up the function and then call it via a pl/sql block which can be scheduled. Very quick to get set up and doesn't need a license.
Hope that's enough to get you started
Pete

Problem in DB Link creation ( Oracle warehouse builder 3i )

I am facing a problem in DB Link creation.
Backend: Oracle 8i Server on my machine
DW Software: Oracle warehouse builder 3i ( client , repository asistant.....)
Operating system: Windows NT 4 SERVICE PACK 6
I wants to use the scott database( default database given by oracle ) as my input source.
How can I create the DB LINK ( for scott database) ?
How can I create the DB LINK ( for any other database) ?
Should I need to add anything in Setting of"ODBC DATASOURCE ADMINISTRATION"
==================
Settings done:
==================
DB Link Name :scott
Host name
Host name: my machine's ip address
port number: 1521
oracle sid: prashant ( my oracle sid)
user name:scott
password:tiger
==================
Gives error:
==================
Testing...
Failed.
ORA-02085 Database link %s connects to %s
*Cause: a database link connected to a database with a different name.
The connection is rejected.
*Action: create a database link with the same name as the database it
connects to, or set global_names=false.
Please change it to false by doing :
first option:
Log in the database with DBA privilege and use the command:
alter system set GLOBAL_NAMES = false
second option:
Change the GLOBAL_NAMES to false in database system parameter file, init.ora
==================
Options tried:
==================
1. I tried to change GLOBAL_NAMES = false but still not able to create the DB LINK.
2. As per suggestion of one the friend
"A file named "Logon.Properties" under the directory $OWB_HOME/wbapp
in this file please set the property
OWBSingleUserLockUsage = false"
I tried the same but it is still not working.
How should I proceed further.
I am expecting URGENT FEEDBACK.
Reply me on : [email protected]
From
Prashant

I solved the problem.
Procedure I followed :
UNINSTALL ORACLE WRAEHOUSE BUILDER SOFTAWARE.
'GLOBAL_NAMES = FALSE' in init.ora file.
RESTARTED MY MACHINE.
INSTALL THE ORACLE WRAEHOUSE BUILDER SOFTAWARE.

Problem in 10g warehouse builder installation

I installed 10g warehouse builder on windows xp but when I was trying to deploy the mapping it show a error .
VLD-2771: System privileges may not allow extraction from source EMP.
please help me out of this problem

Hello,
You might build mapping where you manually configure some target/source object to have database schema and/or database link. In this case OWB warns you that mapping could fail due to lack of access privileges to that object.
But if you explicitly grant appropriate privilege to mappings owner thats OK. Mapping will work fine but your will still get this warning during validation/deployment.

A bug in the warehouse builder regarding mappings of dimensions

Hi there
I do not know if this is the right place to submit a possible bug. Anyways - here goes.
Warehouse builder client: 10.1.0.2.0
Warehouse builder repository: 10.1.0.1.0
I'm creating a dimension, having one level attributes property as a varchar2(30). Thus it has a length of 30. Now, later on I decide this was an error. I update the property to a number, deploys, and reconcile the dimension inbound in the mapping. From now on, it will give an error, since it remembers the length. And a number has a size, not a length. If I remove the dimension from the mapping, and inserts it again, the error still occurs.
By the way, I am able to reproduce this.
Anyone who has experienced this, and can blame the stupid user (me) or classify this as a bug?
Yours
Kim Andersen

Hi Igor
The "error" is actually a "warning":
Warning: VLD-1004: Column length of ASD_ASDASD is longer than the target column length.
where ASD_ASDASD is the dimension property, which I altered. It is annoying, though, to have warnings on the list, that aren't needed. And I also spent considerable time thinking that was the error in a mapping, whereas it was a stupid mistake made by me somewhere else :)
If it's a registered bug, do I get to win some branded Oracle candy?! :)
Yours
Kim

Oracle Warehouse Builder 10.1.0.4 on Windows 2008 - 64 bits

Hi Gurus.
I'm currently working with a customer who wants to migrate all their database-servers to Windows 2008 on 64-bits processors. They're using Oracle Database Enterprise Edition 10g Release 2 (10.2.0.4) and Oracle Warehouse Builder (10.1.0.4). The OWB-clients will still run on Windows XP. I've used the "Certify"-funcionality on Metalink, but it doesn't really answer my questions. (It does* ansver some of my questions, but it also raises a few new ones....)
My main question is: Can you run serverside OWB 10.1.0.4 on Enterprise Edition 10.2.0.4 for Windows 2008 64-bits?
Thanks in advance:-)
Best regards
Helge
Edited by: user613304 on Mar 6, 2009 11:10 PM

No.
Oracle Warehouse Builder version 10.1.x was desupported on 16-JUL-2007.
The desupport notice is available on Metalink (Note 376384.1).
The Warehouse Builder installation as part of the 11.1.0.7 installation should be certified, but I cannot find specifics.

Oracle warehouse builder - OWB & Oracle 10g Db on SuSE

hi folks,
i have Oracle 10g db on my laptop; and it runs great!
but since i am trying to gain skills in data warehousing and business inteligence, and after reading about oracle warehouse builder, i decided to install it on my laptop as well.
but i can not get my head around the docs for installing OWB.
is the only requirement for OWB to have an OWB_ORACLE_HOME environment variable on linux? how do we start OWB service automatically?
has anyone installed OWB with oracle on the same pc?
i would appreciate your comments.
thanks in advance,
Nicolas

Thanks Andreas,
i have printed and followed the advice on these documents.
that is how i have got confused about this OWB_ORACLE_HOME.
i would very much appreciate if could provide me with some brief description of which environment variables are needed for OWB installation.
regards,
nicolas

Oracle Applications Release 12 and Oracle Warehouse Builder 10gR2

Hi
I'm trying to deploying process flows to Workflow but I get the following error:
RPE-02054: The version of Oracle Workflow is incompatible with this Control Center. Required 2.6.3, but found 2.6.0.
Comment I found on another thread: "As far Workflow Versions with Oracle Applications is concerned, it is always 2.6.0. Workflow is not identified with its 2.6.x versioning in Oracle Applications. The 2.6.x.x versioning is purely for Workflow Standalone."
Oracle Warehouse Builder Client: 10.2.1.31
Oracle Warehouse Builder Repository: 10.2.0.1.0
Oracle Applications Release 12
Any help would be appreciated.

May be the excerpt from the other thread is a response I posted.
So, when you say, deploying process flows to Workflow, I do not understand what you are doing exactly? If this involves the Oracle Warehouse Builder you may want to explain a little more in detail since I do not understand how OWB works with Workflow. But as far as I have heard, it is Workflow standalone that is packaged with OWB but you are deploying into Oracle Applications.
What is the version of Oracle Workflow Builder you are using?
Is the steps you are doing certified to be done with Oracle Applications R12?
Thanks

Oracle Warehouse Builder 10.1.0.4

Hi All,
I am searching for Oracle Warehouse builder 10.1 release which is compatible with Oracle database 10gR2 on solaris x86 server.
I have found softwares for solaris sparc but nothing seems available for oracle 10gR2 on solaris x86.
OWB 10.1.0.3 is compatible with oracle database 10gR1 and owb 10.1.0.4 and owb 10.1.0.5 are only compatible with 10gR2.
Currently we are facing some problem with Owb 10.2.0.1 so we have to relay on owb 10.1 release.
Can any one help me to find link for downloading
OWB 10.1.0.4 or 10.1.0.5 for solaris x86 server...
Thanks

I am still unable to find any owb 10.1.x.x release for solaris x86 environment.
Do any one have any link for this??
Message was edited by:
Fkhalid

In urgent need of Warehouse Builder 10.1.0.1 (alternatively 10.1.0.2)

Can anyone please point me to a downloadlocation where I can find Warehouse Builder 10.1.0.1 (or 10.1.0.2) for Windows ?
On the Oracle download-page, only version 10.1.0.4 is available.
regards
Henrik Poulsen

Yes I am looking for release 1.
The link provided is for 10.1.0.4 - I am looking for 10.1.0.1 or 10.1.0.2
regards
Henrik Poulsen

Oracle 9i Warehouse builder...

HI,
We are in the process on designing a datawarehouse.
Please let me know if Oracle ware house builder provides interfaces to the follwing financial systems :-
1)Great Plains     V6.0
2)Sun     4.2.6
3)Oracle Financials     11.5.8
4)Navision     2.6
5)Sage Line 100     6.1
6)Sage Line 100     7
7)CostPoint     4.0 Service Pack 3
8)JD Edwards
9)SAP
10)Exchequer     5.52.083
11)Agresso     5.4 Service pack 2
12)ACCPAC     5.1A & 5.2A
13)Hyperion Enterprise     5.1
Kindly help

You should post this question to the Oracle Warehouse Builder forum.
Warehouse Builder

Warehouse Builder 9.2

Hi All,
I would like to the differences between Oracle Warehouse Builder 9.2 and earlier 9.0.
Also how easy it is to migrate projects in 9.0 to 9.2?.
Regards
Balachandar Ganesan

There have been several versions of OWB9i released (9.0.2, 9.0.3, 9.0.4 and 9.2). To learn more about OWB 9.2, please check out OWB's collateral library on OTN:
http://otn.oracle.com/products/warehouse/htdocs/OTN_collateral.html
It's easy to migrate projects from OWB 9.0 to 9.2. For detailed instructions, see chapter 3 of the OWB 9.2 Installation and Configuration Guide:
http://otn.oracle.com/documentation/warehouse.html

ORA-06502 pl/sql in Oracle warehouse builder

Hi,
I have a problem with using Name and Address operator in Oracle Warehouse builder. When I mapped a table which has more than 7735 rows to another table.
I will get the error "ORA-06502: PL/SQL: numeric or value error: character string buffer too small".
How can I solve this problem?
Thanks a lot!

The problem is happening again.
When it happens, if I quit and I start again Oracle XE, the problem does not happen at first, but happens again after a while (the duration before the error is not always the same). If I increase the number of lines that are printed for the result of a request, I can induce the error; if I decrease the number of lines, the error is not happening.
Here is one of the request (that request returns about 5000 rows) that cause the error, and the complete error message:
ORA-06502: PL/SQL : erreur numérique ou erreur sur une valeur: tampon de
chaîne de caractères trop petit
Translation: buffer for the strings is too small.
select code_pers, nom, prenom, titre, sexe,
date_naissance, pays_nationalite.code_pays_iso,
fonction_institution, code_institution,
complement_adresse_institution, complement_tel_institution,
adresse1_perso_debut, adresse2_perso_rue, adresse3_perso_zip_ville,
pays_adresse.code_pays_iso,
tel_perso, email, site_web, fax,
lower(substr(langue_courrier, 1, 2)),
case
when (adresse_courrier_preferee = 'P') then 'p'
when (adresse_courrier_preferee = 'I') then 'i'
else null
end,
contact_rapide, discipline,
case
when (voeux = 'Vrai') then 'o'
when (voeux = 'Faux') then 'n'
else null
end,
nb_plaquettes, nb_affiches, date_modif
from personne2 join pays2 pays_nationalite
on personne2.nationalite = pays_nationalite.NOM_PAYS
join pays2 pays_adresse
on personne2.pays_perso = pays_adresse.NOM_PAYS

How to register user in Warehouse Builder

Hi All,
I have installed OWB 11g in my machine. I have created repository owner user in OLAP schema. In my process flows few flows are related to "OLAP instance" and few flows are related to "OLTP instance". Now I want to register my OLTP user present in OLTP instance, but when I start the wizard for registering user I get only OLAP instance users.
Please let me know how can I register my OLTP user of OLTP instance.
Is there any way to register database user manually in warehouse builder i.e. without using register user wizard?
Thanks
VishalS

Hi,
create the users as repos-owner in the design center or grant the roles to an existing db user. Don't make them to TARGET users!
Then selct the project, right mouse-click opens the context menue, select configuration, select the security tab and revoke all permissions except read from this users.
Regards,
Detlef

Confuse about Configuring Oracle Warehouse Builder

newbie here... i am abit confuse on how to configure the Oracle Warehouse builder...
I have 2 database... 1 source and 1 new one...
I understand that i have to install the Runtime Repository in the database computer and the Target Schema through the client's computer...
so all this while... i am just confuse about what to install into the source database and what to install into the new database...
Please help...

Location is a logical entity in your OWB design that can be either a database schema, a flat file location, an SAP application location etc. Once you complete your design and are ready to deploy the design into the runtime environment, you will have to 'register' the locations by providing the physical details of your location to OWB (user name/password, database, hostname etc.).
I am a bit confused by your configuration - are the source and the target in two separate schemas or in the same schema? Your posts are somewhat contradictory.
If they are in two different schemas, you should:
1. Create a source module pointing to a source schema (you can then import data object structures from the source schema - i.e. you don't have to create source tables manually in OWB, but you can import them into the module automatically). This module will have a source location (for example SRC_LOC).
2. Create a target module where all your target objects will be (i.e. where the data will be loaded). This module will have a different location (TGT_LOC). In your target module you will also create the mappings.
3. When deploying, you will register SRC_LOC with the physical details of your source schema, while the target location will be registered with the physical details of the target schema. The code generated by OWB during deployment will make sure that the data is extracted from the source schema and inserted into the target schema (either by generating and using DB links or by qualifying the schemas in the extraction queries if source and target are in the same database instance).
On the other hand, if both source and target objects are in the same db schema, you can have all your objects in the same target module and you will only have to register the location of this target module when deploying (LOC_TGT).
That said, there can be a variety of reasons why there is no data in the target after you run the extract mapping that have nothing to do with locations, such as logical errors in the mapping (an inappropriate filter or a wrong join), insufficient privileges etc. I suggest you take a look in the runtime audit browser that should contain the error messages relative to your mapping.
Regards:
Igor

Warehouse Builder 11.2.0.2

Similar Messages

Maybe you are looking for