Warehouse Management - Transfer Order Confirmation

Hi,
When a Transfer Order is Confirmed is the transaction code that was used stored in the SAP System? We use LT11, LT12, and on RF Scanners LM03 and LM05. We have been asked to report which one of these was used in a particular scenario.
Thank you,
Mike

Thank you. This is what I suspected. We currently do report on dates and times and the users, however, we were asked if the transaction codes could be added.
Thanks once again,
Mike

Similar Messages

  • User Exit for warehouse management - transfer order sorting

    Hi,
    I want to sort transfer order of warehouse management by user exit, which user exit I can use?
    Kindly please advise.
    Regards

    Hi,
    I worked on the same object.
    For sorting you have to place a button in the standard transaction,
    I found some screen exits but they are not working.
    Finally I developed the total customized transaction for that standard LM45.
    If you have any doubts let me know.

  • 2-step transfer order confirmation radio frequency (RF) transaction

    Could you please tell me if there is a RF-(mobile) transaction available for a 2-step transfer order confirmation?
    Similar to LT1B / LT1C to confirm the "pick"- and "transfer"-step seperatly.
    Thank you in advance!

    In my opinion, there are no std. RF t-codes similar to LT1B/LT1C. Ref: http://wiki.sdn.sap.com/wiki/display/ERPLO/RadioFrequency(RF)Tcodes
    However, this link: http://help.sap.com/saphelp_sm40/helpdata/en/af/c466412ea98447e10000000a1550b0/content.htm says for a putaway process: When RF devices are in use in a warehouse, it is common to confirm TOs in two steps. This means that the worker confirms the first step of the TO at the source bin, and confirms the final step of the TO at the destination bin.
    Hope this helps.

  • Automatic goods issue for outbound delivery, during the transfer order confirmation

    Hello,
    Could you please advise how to realize automatic goods issue for outbound delivery, during the transfer order confirmation in the WMS.
    Now after creation of outbound delivery, i can't post the goods issue. Before i have to make the transfer order and confrim it and only after this i can post the goods issue in the VL02 t-code.
    Could you please advise - what i have to customize that to make automatic GI for outb. delivery (i mean with creation material document) during the TO confrimation.
    Thanks in advance.

    Hi Iiya
    Check the below setting, might be helpful

  • WM-deactvate transfer order confirmation

    Hi
        i need to de activate the transfer order. while i creating the transfer order it appeared two check box (confirmation), left check
       box not activated but second check  box activated . so i need to deactivated the transfer order confirmation.
    i used the (F4) that check box is for
    Indicator: confirmation
    If this field is selected, the transfer order with all its items has been confirmed.
    Use
    This indicator is automatically set by the system as soon as the last transfer order item has been confirmed.
    Withe Regards
    dinesh

    Hi friend
                Already i deactivated in TCode OMLJ. I create the TO  using  Tcode LT04.....
    PLS HELP ME TO DEACTIVATE
    WITH REAGRDS
    DINESH

  • Partial Transfer Order Confirmation on Picking Process

    We are on the picking process with a delivery and a tranfer order. Movement type MM/WM 601.
    We have a transfer order item line for 10 units.
    We would like to confirm 7 units against one handling unit and the other 3 units against a different handling unit.
    We are using RF transaction pick&pack LM46.
    The problem is that we don´t know how to split the line item in 2 different items within the transfer order.
    We don´t want to confirm the TO with differences and create a new TO for the remaining 3 units. We don´t want either to confirm the TO using LT12 because the process has to be done trough standard SAP RF.
    Could anyone help, please?

    hi kumar
    If you feel this answer suits your query.  Please reward with points.
    Transfer order confirmation based on shippingpoint
    answer:  no the transfer creation not at all based on shipping points.
    The transfer confirmation you have to in lt12 transcton with teh rransfer order number. creation of transfer you can do in lt03 transaction with reference to the delivery frrom you will get transfer order number after that you have to confirm,  so please work on that,
    I hope this answer solve your query.
    Thanks & Regards
    Rack29

  • Avoid automatic Transfer Order confirmation when created.

    Hi Gurus,
    When creating the Transfer Order, it automatically gets confirmed. How can we separate the TO creation and confirmation? Where are the switches? So we can either confirmed the TO in LT12 or by using interface.
    Any help is really appreciated.
    Many Thanks

    hi Jyoti,
    Thanks for the input. I checked in OMLX and it looks like our Warehouse is not listed for the Separate confirmation of pick and transfer to set up two step confirmation.
    But when I try to set this up, system pop up an error saying 'An entry already exists with the same key' whereas this entry is not maintained.
    Can you please elt me know what needs to be doen.
    Many Thanks

  • Transfer Order Confirmation not updated in Header level (Table: LTAK)

    Hi,
        We are facing a problem, transfer order header is not updated with confirmation, but TO items are confirmed and resulting these transfer order to display in RF monitor (LRF1 and LRF2 transactions).
    And the other issue is, we are seeing some transfer orders created without item data (in LTAP table) and unable to confirm these TOs since Item data is not available, hence TO header is not updated with confirmation and resulting these TOs to display in LRF1 and LRF2 report.
    I have cleared some transfer orders by updating the confirmation field in LTAK table through debugging. But we see the issue is ongoing and would like to have permanent solution.
    It will be a great help if anyone have solution to these issues.
    Thanks & Regards,
    Nagarjun

    Hi Nagarjun,
    do you have any Z code in-between ?  Did you check OSS notes ?  Did you apply all patches to your system ?
    What you are describing is something usual when Z programs were developed, you should provide more details for analysis.
    Many thanks,
    Enrico

  • Transfer Order Confirmation

    Hi,
    When confirming transfer order, what is the significance of confirming internally.  It doesn't ask any pick qty.
    Moreover, my client asked me to check if any TO confirmation is done for short quantity, the idoc should trigger the error message where the user would manually edit and update the qty.
    But, while confirming TO, it didn't allow me to specify any pick qty.
    Please help me on this regard.
    Regards,
    B.Anandh

    hi,
      IF it says taht there are no open TO, then def it will fail,
    check out if according to ur requirement, where the material or bin or SU has that aprticular TO open, check out these transactions for open TO)'s
    LT23 for a give TO
    LT24 for a given material
    check out if teh TO is alreayd confirmed or canceld in LT12 if teh above transactiosn does'nt help
    Theja.

  • Urgent -  Transfer Order Confirmation Error- Item category Type Not defined

    Hi Gurus
    i need your help for an <b>urgent production issue</b>
    FYI we have full fledged Wm implemented
    the users are not able to confirm the TO's created and it shows an error that <b>ITEM CATEGORY NOT DEFINED, </b>
    i have checked in the STO in me23n which has many different materials in it and it is all having item category = U and also delivery is generated and it also has some item category defined in it also
    so can you please help me why this is happening and not able to confirm the Transfer orders
    thanks in advance for any help
    regards

    Chakri
    Could you solve the problem. If so could you tell us what the solution.
    Thanks
    Aju Paul

  • Transfer Order Confirmation error

    Hai all,
        WHen I am trying to confirm the transfer order it is showing the error
    'Enter storage unit'
    and does not allow to confirm the transfer order. what may be the problem?.
    Kindly help me to resolve this.
    Thanks in advance,
    S.Jenibalet.

    Hi
    There seems to be a lot of information for you to take in but let me try to simplify it.
    In the strategies in the config you can specify which storage unit types can go in to which storage type and which bin types can go in to which storage uniy type etc.
    If (and I am sure that you have) you have SUT check ticked in the config of your storage type then everytime you want to place stock in to this storage type the system will check the SUT and if required will ask you for it.
    There are two ways round this.
    1. Take off the SUT check in the appropriate st types if you do not need it and this issue goes away.
    2. Ensure that all of your strategies in OMM1 are set and that you have the LE QTY, UOM and SUT set up in the WM2 view in the material master. If you do this the system will know the SUT and will default it in for you.
    I hope that this makes things clearer. Whilst I appreciate all of the replies you have had if you do not do one of these two things it will continue to happen.
    Regards

  • Stock transfer order confirmation

    Hi gurús,
                       There is a transaction for confirm N numbers of OT? Its mean, a massive way to confirm an stock transfer order.
    Thanks in advance for the help
    Regards
    Enzo

    Hi,Yes you can do that with transaction LL01. But you need some customizing in order to decide when a transfer order not confirmed must appear in that report. And you need also to run program  RLLL01SE in order to refresh the list of TO unconfirmed. Rgds, Philippe

  • Exit for transfer order confirmation

    Hi ,
    I need an EXIT to extract the orginal transfer order number and its details once it was confirmed .
    if anybody knows the exit related to it provide me the same ,
    as it is veryurgent
    thanks

    Hi ,
    I need an EXIT to extract the orginal transfer order number and its details once it was confirmed .
    if anybody knows the exit related to it provide me the same ,
    as it is veryurgent
    thanks

  • Serial Number in Warehouse using Transfer Order at bin level

    Hello All,
    I have a requirement to record the serial number in Warehouse. Once the inventory is recorded when creating the TO we want to generate some picking strategy to record the serial number automatically or manually.
    In standard SAP at TO there is no facility to record the serial number.
    How can I achive this process?
    Can someone give me the step by step configuration or enhancement at IM and WM level to achieve this task.
    Thank you very much for supporting us.
    Karen

    bin level tracking with serial number

  • User exit for transfer order confirmation

    Hi All,
    I need to display one error message in LT12 transaction when we select 'pick' and enter.
    Error message:'You are not authorised for this task'.
    I could not find suitable user exits or BADI  for this.
    If ayone is having idea on this,please help me.

    Hi,
    Chk the below badi's
    User-Exit in transaction LT12

Maybe you are looking for

  • Media Encoder CS5 crashing on quit

    I'm testing deploying CS5 with filewave.  Thus far it seems to be working well except for every time I open up Media Encoder CS5 and then quit it, upon quitting, it crashes stating, "Adobe Media Encoder CS5 quit unexpectedly". Any ideas how I can res

  • Starting welogic in debug mode takes 5 minutes to start

    If I start weblogic6.1beta in debug mode the CPU pegs at 100% for about 4-5 minutes before it starts. Anyone else seen this? -cb

  • Pass header from alv to excel

    hi, can any one explain me how to pass header from my alv report when i wish to download it to excel. but the problem here is the header of my alv report comes form a table in to which more fields can be added in future.now the table contains 10 fiel

  • Question about compiler output

    What does the following compiler output mean? Note: test.java uses unchecked or unsafe operations. Note: Recompile with -Xlint:unchecked for details. I need to have use of a stack so I am using java's Stack class from the util package.

  • Bad command startup -- throttling

    Hello guys, I need really some help. I have an issue with my mail (Server 2.2.1) The issue I have are: - warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling - merlin.macwebservers.com postfix/smtpd[1144]: fatal: unsafe ownership or