Warehouse Mangement
Hi experts,
could some one give a elaborated description about what WAREHOUSE MANAGEMENT is used for or the activities or the functionalities that it is responsible for ?
Quick responses would be greatly appreciated.
Thanks
raj
Hai I worked on WM, its so interesting, i am sharing with you as follows:
IM - structure - Plant and Storage Location
WM Structure - Warehouse Number Storage Type Storage Sections+ Storage Bin+ Quants
The Lowest Structure in WM is Quants.
Why we need WM? - Optimizing Resource: time cosumption fully mechanism
which are things are covering in IM and WM?
Goods Receipts
Putaway Process
Goods Issue
Picking and 2 step Picking
To(Trasfer Order - Create and Confirm)TR
Cycle Count
Replenishment
Consversions- Material, Bin to Bin, Batch Conversions, Etc
Interim Storage Types - 902, 916, 999, etc
Storage Bins - High Rack, Low Rack,
Storage Types - Open, Shelf, Fixed, Bulk, Damage,
Staging Areas, Dock Doors
Apart from these task we can have Transporation planning and Shipment, Goods Issue, frieght so many things.
any doubts or questions an WM are most welcome. i will try my level best
but over all very interesting
Reagds:
Satish
Similar Messages
-
hi to all
pls give me the warehouse mangement related t-codesLS01 Create Warehouse Master Record
LS01N Create Warehouse Master Record
LS02 Change Warehouse Master Record
LS02N Change Warehouse Master Record
LS03 Display Warehouse Master Record
LS03N Display Warehouse Master Record
LS04 Display Empty Storage Bins
LS05 Generate Storage Bins
LS06 Block Storage Bins
LS07 Block Quants
LS08 Block Storage Bins by Aisle
LS09 Display Material Data for Stor.Type
LS10 Generate Storage Bins
LS11 Change several stor.bins simultan.
LS12 Block stor.type
LS22 Change Quants
LS23 Display Quants
LS24 Display Quants for Material
LS25 Display Quants per Storage Bin
LS26 Warehouse stocks per material
LS27 Display quants for storage unit
LS28 Display storage units / bin
LS32 Change storage unit
LS33 Display storage unit
LS41 List of control cycles for WIP loc.
LS51 Create Batch Search Strategy - WM
LS52 Change Batch Search Strategie - WM
LS53 Display Batch Search Strategy - WM
LSMW Legacy System Migration Workbench
LSO_TP LS: Participation Document
LT01 Create Transfer Order
LT02 Create TO for Inventory Difference
LT03 Create TO from Delivery Note
LT04 Create TO from TR
LT05 Process Posting Change Notice
LT06 Create TO for Material Document
LT07 Create TO for mixed storage unit
LT08 Manual addition to storage unit
LT09 ID point function for storage units
LT0A Pre-plan storage units
LT0B Putaway of Handling Units
LT0C Picking of Shipping Units
LT0D Stock Transfer of Shipping Units
LT0E Create Removal TO for 2-Step Picking
LT0F Create TO for Inbound Delivery
LT0G Return delivery to stock
LT0H Placement of existing HUs
LT0I Removal of existing Handling units
LT0J Put Away Handling Unit
LT0R Request replenishment manually
LT10 Create Transfer Order from List
LT11 Confirm Transfer Order Item
LT12 Confirm transfer order
LT13 Confirm TO for storage unit
LT14 Confirm preplanned TO item
LT15 Cancelling transfer order
LT16 Cancelling TO for storage unit
LT17 Single Entry of Actual Data
LT1A Change Transfer Order
LT1B Confirm TO-Item Pick
LT1C Confirm TO-Item Transport
LT1D Confirm Transfer Order Pick
LT1E Confirm Transfer Order Transport
LT1F Confirm TO for SU Pick
LT1G Confirm TO for SU Transport
LT21 Display Transfer Order
LT22 Display Transfer Order / Stor. Type
LT23 Display Transfer Orders by Numbers
LT24 Display Transfer Order / Material
LT25 Display Transfer Order / Group
LT25A Display Transfer Order / Group
LT25N Confirm Transfer ORder / Group
LT26 Transfer orders for storage bin -
Return process in Warehouse mangement
Hi all,
can any one telll me the steps involved in the return process in Warehouse Management.
Waiting for UR early reply.
With Rgd
VinodEverything starts in inventory management.
once the goods movement is posted in IM, then you get the stock into the interim storage type in WM. at the same time you should get a transfer request which need to be converted into a transfer order to move the material into its final bin.
In case of a customer return:
CSR will enter a return order.
then a return delivery is created.
Then post goods receipt is done in reference to the delvery.
you get stock into the interim bin
convert the TR to a TO and confirm the movement.
then in inventory management a transfer posting is done to change stock status from return to own stock.
at the same time you get a transfer posting request in WM, which you can process with LU04 transaction, to get the status in IM and WM in sync.
finally or somewhere between in this process the CSR issues a credit note to the customer. -
Message settings for physical Inventory in Warehouse mangement
Dear All,
I have one issue which is as follows.
I created physical inventory record using MI11.Entered the count.The count entered is more than the book count.Now when I enter qty more or less than the book quantity system needs to through an warning message for this.
How to set the above settings in warehouse management physical inventory process.
Thanks in advance.
BabuHi,
Go to OMCQ transaction and create mesage and make accese sequence and condition table and all for this message. -
Serial Entry API in warehouse Mangement
Hi
Can any one plz help me. I have one requirement in receipt screen in warehouse management responsibility. Business requires a upload button in serial entry screen .when they upload the attachment through the upload button , then serials will automatically populate in serial entry screen. is there any API's to populate the serials in serial entry screen automatically?
Nav : Warehouse Operative Responsibility------------> Receipts screen ------------> Lot/Serial(Button)------------> Serials(Button)
Regards|SurendraIt appears there are a number of ports of comm
packages to FreeBSD, see the referenced page. RXTX is
one that works well in other environments.
http://www.freebsdsoftware.org/comms/
I tried java-commapi-freebsd, but it also reports an error when opening the port
FreebsdSerial: UnsatisfiedLinkError = /usr/local/java/jre/lib/i386/libSerial.so: /usr/local/java/jre/lib/i386/libSerial.so: ELF file OS ABI invalid
java.lang.UnsatisfiedLinkError: /usr/local/java/jre/lib/i386/libSerial.so: /usr/local/java/jre/lib/i386/libSerial.so: ELF file OS ABI invalid
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1586)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1503)
at java.lang.Runtime.loadLibrary0(Runtime.java:788)
at java.lang.System.loadLibrary(System.java:834)
at org.freebsd.io.comm.FreebsdSerial.<clinit>(FreebsdSerial.java:85)
at org.freebsd.io.comm.FreebsdDriver.getCommPort(FreebsdDriver.java:114)
at javax.comm.CommPortIdentifier.open(CommPortIdentifier.java:634)
at ATTest2.main(ATTest2.java:27)
Exception in thread "main" java.lang.UnsatisfiedLinkError: deviceOpen
at org.freebsd.io.comm.FreebsdSerial.deviceOpen(Native Method)
at org.freebsd.io.comm.FreebsdSerial.<init>(FreebsdSerial.java:115)
at org.freebsd.io.comm.FreebsdDriver.getCommPort(FreebsdDriver.java:114)
at javax.comm.CommPortIdentifier.open(CommPortIdentifier.java:634)
at ATTest2.main(ATTest2.java:27)And then I tried RXTX, but it seems that tere's some problem to send the cartridge return character, so I can't send the AT commands properly to get any response. I tried \r \r\n \x0d etc. to no avail. Any idea what's the problem with the java-commapi-freebsd thing, or how to send the AT commands properly with RXTX? Thanks a lot! -
T-codes for warehouse mangement
hi to all
can anybody gives the t-codes used in warehouse managementHi Ramachandra,
Refer to the link below, all codes starting with L are related to WM. You can also obtain this info from the table TSTC
http://www.easymarketplace.de/transactions-i-l.php
Hope the above is helpful
Regards,
Vivek -
Integration of warehouse mangement with production
Hello Guru
kindly give me a brief intro on WM and its difference compared toh MM and the integration of WM with PP.
thanks
NithiHi,
Please check this link to get the relevant information on warehouse
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LEWM/MMWM.pdf
Reward points if useful
Regards,
Irshad -
Post Warehouse Mangement Difference.
Hi
We have done Physical Inven Warehouse difference posting ,and the difference qty is posted to the storgae type 999 ,we have not done Inventory management posting .
Will it possible to recverse the physical inve doc at this time. Phyiscal inv doc line status is "Cleared"
Pls help me to solve this
Regards
alagukumaranHi Kumar,
As I understand you, the inventory difference in WM has been cleared (LI20) already. In this case I think you should clear the difference in IM (LI21) also and after that you should do another inventory process (WM & IM) to set the proper stock levels in SAP.
Just my opinion, I'm not WM expert.
BR
Csaba -
Warehouse Mangement minor issue
Dear all
Taking into the consideration that fixed bin cannot be used, can 1 material be used in more than 1 bin?
Any suggestion?
Point will be given handsomely for any good suggestion.Hi
Yes , you can definitely use dynamic bins for a material.But every time you need to specify the dynamic bin
numbers while perfoming the warehouse operations.
For understanding purpose would like to know the business requirement or reason for the same?
Regards,
Ravindran -
hi to all,
My question is how exactly WM works in SAP and how it is interlinked with other modules,
please give me a brief idea about itAhmed,
Welcome to SDN forum.
There are Lots of informative answers you will get in the forum which will also enhance your knowledge.
Click on the link....
https://www.sdn.sap.com/irj/scn/forumsearch
PS: Request you to please post the thread in relevant forum, there is dedicated forum for MM/WM queries.
Thanks,
Raja
Edited by: Raja Singh Chhabeda on May 20, 2009 12:46 PM -
LE-WM how this shipping process in warehouse management
hi
what is exactly shipping process how it is supported in logistic execution and warehouse process
what is the process of outbound deliveries can you tell me how these process useful in warehouse management .
thanks inadvance.HI Subash,
In case of Shipping with Warehouse Mangement we process the picking functionality using transfer orders.
I.e when we create a delivery with reference to the sales order, the delivery qty will be editable but the picking qty field be display only. You can also see the Overall WM status in the Picking tab as A - Partially processed. (If all the IMG settings are done correctly).
Once you entered the Delivery qty save the delivery doc with pickin qty as 0 (display).
Now go to transaction LT03 (TO with ref to Delivery Note) & create a Trasfer Order (TO) with ref to Delv.d. Then confirm the TO using LT12 transaction.
Now go to VL02N you can see the Picked Qty in the Picking tab & also the Overall WM status will be C - completely Processed. Now do the PGI for the delivery.
Hope it helps.
Regards, -
Master data for warehouse management
Hi experts what are the master data for the warehouse
management module.............Hi
Sending you all the table for the warehouse mangement.
Inventory document
IKPF Header: Physical Inventory Document
ISEG Physical Inventory Document Items
LINK Inventory document header in WM
LINP Inventory document item in WM
LINV Inventory data per quant
Storage locations and stocks
LAGP Storage bins
LEIN Storage unit header records
LQUA Quants
LQUAB Total quant counts for certain strategies
MEIK Make-to-Order Stock for Customer Order
MSCA Sales Orders on Hand with Vendor
MSKA Sales Order Stock
MBPR Stock at Production Storage Bin
MLGN Material Data per Warehouse Number
MLGT Material Data per Storage Type
Rewards if useful.
with regards
Nikunj Shah -
Process Chain Error while activating DSO
Hello.
1st, let me say that I'm pretty new to BI so I apologize for the stupid question :-S
I have a process chain (Warehouse Mangement) that failed this morning at the DSO data activation step. It's simply because some entries have lowercase value in a field that should not. I know how easy this is to fix in the transformation but my problem is more on how to fix the actual fail of the process chain. Can I edit the "non-activated" data in the DSO (only 2-3 records that I need to put in uppercase) and "repair" my process chain or should I proceed another way?
Thanks for your help.Hi John.
If guess your Process Chain process ended in "Red color". Once you fix the error you can try to make "right-click" on the process with error and select "Repair". If this operation is "supported" by the activation process you won't have error.
But I really believe that you'll have to erase the request and launch the complete process (o set of related processes) once again. It's possible that the data you want its already in the NEW-DATA table of your ODS.
This tables is the following. /BIC/A<your ods tech-name>40
Hope it helps
gdmon.- -
Error message while creating an inbound delivery to generate an idoc
hi,
i am getting the following error message while creating an inbound delivery(vl31n) where the message has to be sent ot decentralized warehouse mangament using idoc .
." No recipient could be determined for object BUS2015 method SAVEREPLICA"
Procedure for System Administration
The system attempts to determine a recipient for object BUS2015 method SAVEREPLICA using the filter object types WHSE_NO. The system cannot determine a recipient. Define a filter object type WHSE_NO with a valid filter value for recipient determination for object BUS2015 method SAVEREPLICA.
need help
regards
leoInbound delivery is not part of Sales and Distribution. You might want to move your post to either the Logistics Materials Management (MM) forum or the Workflow forum.
Also sometimes search for OSS notes by the message class and number helps. -
How to avoid transfer Order creation in Outbound Delivery Picking
Dear Experts
At present situation, I am creating transfer order through Subsequent Function tab for Picking in outbound Delivery.
Warehouse mangement is Active
Is there any settings in IMG so that we can avoid the step of creating tranfer Order during Outbound delivey
Thanks in Advance
RegardsIf your wearhouse management is active, then you need to create transfer order. If you don;t want to create transfer order, remove the wearhouse settings for the material in material master.
award if it helps
krishna
Maybe you are looking for
-
BAdI: ME_GUI_PO_CUST add customer field to item level
Hi Experts, I want to add a customer field to PO item level, how to do that? the functional consultant told me to first implement the BAdI: ME_PROCESS_PO_CUST before I can use BAdI: ME_GUI_PO_CUST, can anyone show me the procedure on how to implement
-
I have installed a new H/D and want to make it a dedicated photo drive and scratch disk for CS5. I moved my cataolog onto the new drive and I had to have LR "point" to the new location in order to open so that's all good now. What's the procedure to
-
Hi. Yes, I did a search in Illustrator support for Edit Existing Swatch... But apparently that is far to eclectic an inquiry to bring up instructions on how to do so. Can anyone tell me the steps to do so? (I do it ALL THE TIME in Flash, but Illustra
-
Hi All, Is there a limit on the number of user-defined fields? In SBO 2005 PL03 I cannot create more than 30 UDFs on the BP table. I get the following error: WTR1 Error(1) The record limit of 8060 is not close to being reached. Thanks in advance, Ade
-
[help] Flash cache problem?
Operating Environment: IIS6+ASP.Net 2.0+Flash Framework / Procedure: When running, Flash will run ASP.NET program. ASP.NET then extracts data from the database and generates a XML file for Flash. Flash reads the XML file and parse it into a readable