Warehouse number at scm

What are the Assignment to warehouse number, who to process it durning pgi.
thanks
Prasanna

Hi ,
A ware house number is assigned to  combinations of  a Plant & Storage Location. How ever these plant and storage locatoin comibations must be unique.
Regarding processing of PGI - its a business process decision regarding authorisations and organization structure. Generally its done by the ware house personnel.
Regards
Raghuramam

Similar Messages

  • FM for calculating stock on a warehouse number

    Hi all
       Anybody knows a FM for calculating a material stock on a warehouse number? I need a FM which works similar to trx LS26, i need the stock sorted by storage type.
    Thanks and regards

    I found these FMS` ..May be it helps you or give you some guide lines..
    /SAPNEA/SMAPI_STOCK_GETLIST    Get stock list for warehouse and van       
    CBIH_LB11_QTY_GET_STOCK_TOTAL  EHS: User Exit - Determine Warehouse Stock f
    L2018                          BAPI for Bus.Object WarehouseTransOrder    
    L3016                          BAPI for Business Object Warehouse Stock                                                                               
    Thanks

  • Finding warehouse number with storage location

    Hi all,
    How can I find the warehouse number given the material, plant and the storage location? Thanks in advance.

    You need to join two tables :
    MARD - MATNR,LGORT,WERKS
    MLGN - Here you get Ware house number
    Check with LS24,LS26 Transaction and also check with MLGT Table
    Thanks
    Seshu

  • One warehouse number, two number ranges?

    Hi all,
    I have a scenario where an external system creates some of the transfer orders in a warehouse, while others are created through normal WM processes.
    I would like to be able to give the external system a specific number range to use, separate from the standard range.
    Standard system only allows assignment of one number range to a warehouse number for TO.
    The external system will communicate with ECC through IDOCs.
    Does anyone know if it is possible to set this up? Looking a enhancing the TO creation when triggered by the IDOC is a possiblility I guess?
    Regards,
    Mark.

    Hi Mark,
    Can you please check if you can manipulate the value of screen field V_T340DA-NUKTA thru' the function module used for the inbound idoc posting TO? You can maintain 02 number range as external with given range in SPRO. On execution of function module for Idoc above screen field value change to 02..the other number can be used.
    Hope this will help.
    Reg,
    Sudhir

  • Warehouse number from "Decentralized WMS" to "Centralized"

    Hi all
    We have implemented a warehouse number with Decentralized WMS.
    ERP and WM are SAP systems.
    Now, weu2019d like to integrate WM into the same ERP SAP system (convert a warehouse number from "Decentralized WMS" to "Centralized").
    So, what shall we do?
    Can we maintain the same warehouse number and do the customizing on it (deactivate Decentralized WMS and so on)? Or we must define a new one?
    In both cases, (maintain the same warehouse number or define a new one) how can we transfer WM stock from decentralized to centralized?
    Any suggest?
    Thanks a lot
    Michele

    Hi Funky Tech.
    Thank you for your answer, but my question is another.
    We have already implemented a warehouse number as decentralized WMS.
    Now we want to integrate it into ERP (centralized WMS).
    So the questions are:
    Can we maintain the same warehouse number and do the customizing on it (deactivate Decentralized WMS and so on)? Or we must define a new one?
    In both cases, (maintain the same warehouse number or define a new one) how can we transfer WM stock from decentralized to centralized?
    Thanks
    Michele

  • Problem with TCODE PK02 with the warehouse number field.

    Hello folks,
    I have created a control cycle in the TCODE PK01. When I tried to change it it is not displaying the warehouse number that I have used while saving. Also here it is showing the warehouse number as a mandatory field.
    I have input the warehouse number in the PK02 TCODE and saved. I am able to see the warehouse number value updated in the table also. But again if I try to enter the PK02 TCODE , it is displaying empty warehouse number and showing as a mandatory field.
    Also in TCODE PK03 tcode , I am not able to see the warehouse number field I have saved.
    Can anyone address on the below issues?:
    1. how to configure the PK02 warehouse number mandatory field settings and
    2. Populating the warehouse number field in the PK02 and PK03.
    Thanks,
    Ramineni.
    << Moderator message - You have a better chance of getting answers to a question if you flag your thread as a question rather than removing the flag. >>
    Edited by: Rob Burbank on Jun 14, 2011 9:57 AM

    Hi,
    I do not see warehouse number field in contorl cycle defination..
    what type of control cycle is this? Classic or event driven?
    Looks like this is a Z screen field..
    check if user exit is impliemented properly.
    Thanks,
    Santosh Sarda

  • Storage unit activation for warehouse number

    Hi,
    User is facing two problems.
    1.They could not go directly to TO screen after doing any warehouse management transactions.
    2.In TO user wants to enter storage units options but could not find any list.
    I could find that warehouse no which is assigned that storage location is not actived for storage unit management.
    Can I delete this warehouse no. and copy new warehouse number which is active in storage unit management.
    There are some TO already created for this warehouse no.How should I proceed in this issue.
    Can we reverse TR and TO.
    Please give some solutions
    Thanks

    Config:  LE \ WM \ Master data \ define control parameters
    Tick box bottom left.
    Before creating a whole new WHS, in your Sandbox system try completing or cancelling every outstanding task related to the Warehouse e.g. TRs, PCNs, TOs etc. and then activate SUM as above and for applicable Storage Types (NOT interim ones).  It might save you quite a bit of effort.
    If it works (I've never tried it but don't see why it wouldn't) in Sandbox then also do in Development and Pre-Production, then do the same in Production over a weekend and get the Warehouse guys to complete all operations, transport settings across and you're done.  Alternatively you can cancel outstanding operations but you then need to note and re-create.
    Regards,
    Nick

  • Weight unit of a Warehouse Number

    Hi,
    While defining the control parameters of a Warehouse number, I have come across with a field called Weight Unit & Partial picking.
    With the SAP help data, i am not able to understand the real functionality of these particular fields.
    It could be highly appreciable if any one helps me in getting the real functionality of these fields.
    Regards,
    Dils

    V-T3000-TEILS
    Multiple processing can be used for transfer order creation for outbound deliveries.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f841f24afa11d182b90000e829fbfe/frameset.htm
    Prerequisites
    Allowing Partial Processing of Transfer Requirements or Deliveries
    You have activated partial processing for multiple processing in the Customizing for Warehouse Management under Master Data ® Define Control Parameters for Warehouse Number. In doing so, you allow the system to partially process transfer requirements or deliveries in multiple processing. In this case you only create a transfer order for a partial quantity of the original item in the reference document if it is not possible to create a TO for the complete item.
    V_T3000-GEWEI
    F1 help for the field:
    Weight Unit
    Unit referring to the gross weight or net weight of the material.
    Procedure
    All weights are managed in the warehouse in the unit of weight that you specify here. In the case of movements, the material weight is converted to this unit of weight and updated in the storage bins.
    The capacity check by weight is also made in this unit. Here, the maximum accuracy is 1/1000 of this unit of weight.
    You should not change this unit of weight during productive operation since all weights relate to it and would therefore be incorrect. Should it be necessary to change it, you must correct the existing data by running report RLS10200 afterwards.
    Examples
    If you choose too small a unit of weight, there is a risk of field overflows with "heavy" materials and totals.
    If you choose too large a unit of weight, large rounding errors may occur. This can result in problems with "light" materials in the case of capacity checks by weight in particular.
    I think it's clear: SAP uses this unit of weight to calculate the weights of goods in storage bins and it also uses it fo carry out capacity check in this unit.
    As for capacity check:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f845604afa11d182b90000e829fbfe/frameset.htm
    Regards,
    Csaba

  • In GR, T331 entry for warehouse number GVW and storage type 916 not found

    Hi friends,
    while doing gr, it is giving following error. we are having wm
    T331 entry for warehouse number GVW and storage type 916 not found
    regards,
    william

    Hai,
    Add the entry 0f 916 storage type to ur warehouse by copying from std i.e 001 in SPRO/Log Exe/WM/Master data/Define str type.
    Regards,
    BSK

  • Unusual entries in table V_T333, unknown warehouse number

    Hello all,
    After putting enhancement pack 3 on our systems, we discovered that it added a warehouse number MLO.
    We cannot figure out why this was added, or what purpose it serves.
    Any suggestions?

    Hi,
    I've seen the same. There are no notes mentioning this.
    Regards,
    MdZ

  • Warehouse number

    Hi All,
    I want to know two things
    1.Where can we assign the delivery item to the warehouse number?
    2.Where can we see the WM status of the delibery item is "relevant or not relevant".
    I need urgent.
    Thanks&Regards
    Govind.

    Govind,
         Your storage type indicator defined in material master WM views decide the strategy to be used for stock removal and stock placement. The strategy definition in SPRO->LE->WM->Strategies decide which storage type the material should be picked from and placed to.
    WM status of the delivery line is relavant if he material is being picked from a WM managed storage location. A WM managed storage location is assigned to the warehouse in SPRO->Enterpirse Structure->Assignments->Logistics Execution
    cheers,
    Sarvesh

  • Config Steps for Pick process from warehouse number

    Dear Gurus,
    Need the config. steps for picking process with warehouse number assignments
    Thanks

    Hi,
    You only need to assign a Warehouse number for the combination of Plant and Storage location in SPRO in assignment of organisational structures in Warehouse Mngt. If this is done, then picking will become mandatory and you can do picking either manually or automatically through LT03 or other transactions.
    If this warehouse assignment is not done, then you can put the picking quantity directly in delivery and do PGI. If this assignment is done, then you will be able to do picking only through transactions like LT03, either in foreground or background. In this case, u will not be able to manually update the picking quantity in delivery.
    Hope this helps.

  • Material does not exist in the warehouse number

    Hi
    I am new to WM. I am in the process of learning. While learning i encountered an error indicating that the material does not exist in the warehouse number. i hava configured the required organisational structure configuration for WM,
    Is anything i have to configure for material or material type it belongs to the warehouse number and if it is yes where can i configure the same.?
    Regards
    Siva

    What is the exact error message and code and in which transaction is it occuring?
    The material has to be maintained at the following views:
    - Basic Data
    - Sales: General/Plant
    - Purchasing
    - General Plant/Data Storage
    - Warehouse Management
    - Accounting
    Make sure the material exists at each and every  Storage Type you use.
    You might also need to check the following settings:
    IMG > Logistics Execution > Warehouse Management > Interfaces > Inventory Management > Define Storage Location Control
    And delete any un-necessary Warhouse to Plant assignments in
    IMG > Enterprise Structure > Assignment > Logistics Execution > Assign warehouse number to plant/storage location

  • WM movement type 255 not allowed for warehouse number 008

    Hi,
    Error message "WM movement type 255 not allowed for warehouse number 008" pops up during creation of outbound delivery. I checked the schedule line for this sales order, it was actually tagged to movement type 631 instead of 255. There ain't any movement type 255 at all. How to solve this?
    Thanks.

    Hi,
    Check in Customizing for Define Movement Types where for the given warehouse number movement type 255 is assigned.
    Path is,
    Logistics Execution - Activities - Transfers - Define Movement Types.
    Check for 008 Movement 255 is assigned or not.
    Thanks
    Krishna.

  • How to get Storage unit and Warehouse number from Handling Unit.

    hello all,
    I have Handling unit and Material in my program as an input, using these two fields i have to get corresponding storage unit and ware house number, to pick up transfer order.
    Can anybody explain me who can we get Storage Unit and Warehouse Number from Handling Unit.
    I know we can pull transfer order from table LTAK & LTAP using warehouse number.
    But i dont understand how to get warehouse number from handling unit.
    There is table LSUTO which has warehouse and Handling unit relation, but in our system there is not data maintained in that table. So, i was just wondering how can i get warehouse number from the given handling unit number.
    please guide me
    thanks
    Edited by: Mr A on May 12, 2008 1:23 AM

    Hi ,
        Check out the handling unit item table VEPO. You got storage location(LGORT) in it.
    Reward points if it was useful.
    Regards,
    Abhishek

Maybe you are looking for