Warehouse task not being created : Handling unit was not locked

Hi,
I am trying to create a warehouse task w.r.t to an o/b delivery in EWM. While doing so when I try and create the Warehouse task from the Warehouse Req an error comes up : Warehouse Task cannot be created. Handling unit was not locked.
What is the resolution for this? is there some way we can lock the individual handling units?
Arup

Hi,
I am not using HUM at the warehouse level. The storage type used is 0010 (High Rack Storage) and it is defined to behave as a standard storage type.
Arup

Similar Messages

Handling unit was not blocked - action cancelled VL02N

Dear All,
While pack VL02N data upload by bapi HU_PACKING_AND_UNPACKING its showing error
Handling unit was not blocked - action cancelled
Mohamed

Refer OSS Note 370195 , 331715

Error 'Handling unit was not blocked - action cancelled' for Packing

Hi Friends
I am trying to execute Functional Module HU_PACKING_AND_UNPACKING to Pack Sales Order Line Items in to HU.
But System is throwing unusual error Handling unit was not blocked - action cancelled
The Other SAP SDN thread advised to implement OSS Note 370195 , 331715.
The Input Code given in the Note 370195 SAP Developer can not find in our system.
SAP Note 331715 already implemented in our system.
Please help to resolve the issue for Packing Sales Order Line Items in to HU.
Thanks
SR

Refer OSS Note 370195 , 331715

TS1814 I have purchased iPhone 3g device from my friend, I connected it to the iTunes to upgrade from 3.1 to 6.0 as many softwares were not being installed as iOS was not up to date. I upgraded but now I can not activate my device. What I should do now???

I have purchased iPhone 3g device from my friend, I connected it to the iTunes to upgrade from 3.1 to 6.0 as many softwares were not being installed as iOS was not up to date. I upgraded but now I can not activate my device. What I should do now??? i am really feeling difficulty because i have been disconnected from the network.
I am from Pakistan.

The 3G cannot be updated to iOS6, it can only go to iOS 4.2.1.
Activation issues are generally the result of the device being hacked or jailbroken.

[svn:bz-trunk] 23143: Certain code needs to check the existence of the class validation validator (some brokers and other listeners) during message broker init, however the validator was not being created till the very end of the method .

Revision: 23143
Revision: 23143
Author:   [email protected]
Date:     2011-10-27 06:31:02 -0700 (Thu, 27 Oct 2011)
Log Message:
Certain code needs to check the existence of the class validation validator (some brokers and other listeners) during message broker init, however the validator was not being created till the very end of the method. Promote it to be at the top instead of at the bottom.
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/config/MessagingConfiguration.java

Revision: 23143
Revision: 23143
Author:   [email protected]
Date:     2011-10-27 06:31:02 -0700 (Thu, 27 Oct 2011)
Log Message:
Certain code needs to check the existence of the class validation validator (some brokers and other listeners) during message broker init, however the validator was not being created till the very end of the method. Promote it to be at the top instead of at the bottom.
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/config/MessagingConfiguration.java

Create Handling unit after receiving finished goods

Hello,
My client's requirement is that they do not want a TR or TO to get created at the time of Production order confirmation and neither they want to create the Handling unit at the time of confirmation.
They want to move the material from production to warehouse as one Handling unit after multiple confirmations. They want to create Handling unit manually after the receipt of materials.
What is the process of creating Handling unit after we have FG (multiple batches).
After creation of Handling units, my client wants to ship the same Handling unit out to customer.
How to create Handling unit
Regards
Prabhjot Singh

Dear
Please Follow this Steps
Process Cycle:
1)Create Material with WM View in Material Master (MM01)
2)Crearte Purchase Order(ME21N) consult MM
3)Release Purchase Order(ME29N, ME28)
4)Goods Receipts (MIGO)
5)Creating Transfer Request (note:- this will come Automatically while doing G/R)
6)Create Transfer Order (LB13)
7)Confirm Transfer Order (LT12)
10)Check Stock Overview in Warehouse (LS24)
Goods Issue Process from Warehouse:
1)Create Reservation (MB21)
2)Goods Issue W.R.T Reservation (MIGO)
3)Create Transfer Order (LT06)
4)Confirm Transfer Order (LT12)
After Doing all This Steps In MMBE At Stock Requirement List Click on the Selected Stock and Right Click u can See the WM stocks And Handling Unit
with Regards
Pushpalas

Create Handling unit after receiving finished goods from production

Hello,
My client's requirement is that they do not want a TR or TO to get created at the time of Production order confirmation and neither they want to create the Handling unit at the time of confirmation.
They want to move the material from production to warehouse as one Handling unit after multiple confirmations. They want to create Handling unit manually after the receipt of materials.
What is the process of creating Handling unit after we have FG (multiple batches).
After creation of Handling units, my client wants to ship the same Handling unit out to customer.
How to create Handling unit
Regards
Prabhjot Singh

Hi,
If I understand right - customer wants a simple transfer of finished goods from production to warehouse, and latter pack into handling units.
Possible scenario:
1) Assign production order to non-WM and non-HU storage location. Post GR for production order using transaction MIGO (mvmt. type 101) for a whole quantity produced for production order.
2) Setup packing table in IMG (Logistic General > Handling Units > General > Setup packing table> ...) --> packing table is a functionality for packing goods into HU - it takes goods from predefined source non-WM/non-HU location, packs them into HU and places them in target WM-HUM location.
2) Maintain packaging instruction (trans. POP1 and POF1) to automate the packaging quantities.
3) Run packaging table by HUPAST, select your table and pack.
4) Packed HU ends up on WM-HUM location.
This process can be done either in SAP GUI (HUPAST) or you can build it in RF transaction and run it with mobile RF scanner (ABAP development required).
Hopefully this will be of any help.
Regards, Primoz

Itunes 11 shows zero photos in Aperture and ApertureData.xml not being created in library

I've tried to do some trouble shooting of this problem. I've rebuilt permissions, I've repaired and rebuilt the Aperture library, I've made sure sharing previews is always for iLife and iWork, I've created a new library, switched to it and switched back and I can't get iTunes to see my albums and pictures from my iPhoto library when I try to sync through Aperture. What I have found is when I created the new temporary library and loaded one pic into it, a file in the package contents called ApertureData.xml is created, which isn't created in the iPhoto libary, it has AlbumData.xml. iTunes does recognize the temp library and photo. I deleted the AlbumData.xml, but it was just recreated. It seems Aperture is supposed to be creating a file that it isn't. Any help would be appreciated, I'm trying to migrate from iPhoto to using Aperture exclusively to manage photos and sync with devices. All software is up to date. Thanks.

in case anyone searches and finds this question, but importing by iphoto library to aperture into a new library, I fixed the problem. I do not know how to fix the original issue of the aperturedata.xml not being created in the origianl iphoto library.

Internal Order not being created in cProjects-Accounting Integration

Dear All,
We are working on cProjects 4.0 with ECC 6.0,
Trying to do Accounting Integration.
For only one Project I am able to create Internal Order,
But I am getting following error.
Cost/revenue rate YP002 is not valid in organization 00000000
Inspite of assigning these rates to the organization 00000000
For other projects, when I click on accounting:
I get following error
"Single-Obj.Controlling on InternalOrders 0188993B3E343947A046B554FD886E03 000006000032 does not exist"
When I go to Controlling Cockpit, I see this Internal Order not being created.
Have revisited all settings, project type, etc.
How do I go about this.
Kindly help,
Navendu

Dear All,
I was able to solve the one of the problem, with the following settings,
Assign Cost Elements & Activity Types:
Choose Organization, Start & End Dates, Cost and Revenue Elements, Currency.
The start and end date of the cost/ revenue did not fall within the start and end date of the Organization.
Regards,
Navendu Shirali

Class not being created when running from jar

Hi all,
Tech info first:
IDE: Sun Java Studio Enterprise 8
Plaform: windows xp
I have created a Swing app, that connects to a com port(using the RXTXcomm). now, when I run the app in the IDE, everything is fine and dandy, but, when I run the jar file, the application loads, but the class in the app which deals with the com port is not created. here is the code:
    private static void createAndShowGUI() {
        //Make sure we have nice window decorations.
        JFrame.setDefaultLookAndFeelDecorated(true);
        Main receiver = new Main();
        receiver.getPropertiesFromFile();
        //Create and set up the window.
        frame = new JFrame("R�FILOG RFID Empf�nger");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setContentPane(receiver.mainPanel);
        frame.setJMenuBar(receiver.createMenuBar());
        frame.addWindowListener(receiver);
        frame.setLocationByPlatform(true);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
        portListener = new RFIDReaderComm(receiver, "COM3");
        portListener.getConfiguration();
    public static void main(String[] args) {
        //Schedule a job for the event-dispatching thread:
        //creating and showing this application's GUI.
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
portListener in the createAndShowGUI() function is an interface level parameter and is the class that is not being created. There is no error message.
If I move the two lines that deal with the port listener before the frame.pack() line, then the GUI is not even loaded, and when I view the processes in the task manager, the process starts and then quits without anything becoming visible. So from this I guess there is a problem with creating the class when running from a jar, but without any error messages, I have not a clue where to start...can anyone help?
thanks in advance.

Well, some more info, so maybe someone can come up with some tips for me...this is really important, and any help is greatly appreciated.
This is obviously a classpath problem. After running the my jar file with java -jar I finally got the error NoClassDefFoundError
Kind of obvious I suppose. But, I cannot seem to get the two jar files I need into the classpath. I have tried the following:
Updating my computers CLASSPATH with the relevant paths - not working
Trying to get the Sun Java Studio Enterprise to build the required jar files into the final package - cannot get this to work
Tried updating the manifest.mf in the following way:
Created a text file Manifest.txt with the lines:
Class-Path: RXTXcomm.jar
Class-Path: BrowserLauncher2-10rc4.jar
ran the command (in the same directory as Manifest.txt):
jar cfm RUFILOGScanner.jar Manifest.txt classes/*.class
but this does not work either. When I run: jar tf RUFILOGScanner.jar all I get is:
META-INF/
META-INF/MANIFEST.MF
classes/
classes/CRCCalculator.class
classes/Main$1.class
classes/Main.class
classes/RFIDReaderComm.class
classes/URLDialog$1.class
classes/URLDialog$2.class
classes/URLDialog.class
the classes I want added are not there. Plus, (I think this is because I am running SE8) the manifest.mf is not in a folder called META-INF. In fact, I have no folder called META-INF. Is this significant?
Please, can anyone help me?

Nodes not being created?

I am having a problem with my laptop. I had this issue with my USB stick which was fixed by manually creating nodes (discussed here http://bbs.archlinux.org/viewtopic.php? … highlight=). However, upon trying other usb devices that work just fine on my desktop, I have the same result as I did with the usb stick. The nodes are not being created in /dev/ even though dmesg shows that the usb device was connected. I have a custom kernel and hotplug is NOT installed.
Any ideas on where to look with this? I have tried reinstalling udev and upgrading the kernel. Thanks for any help,

jftaylor21 wrote:
hey jskier, what exactly did you have to enable in the kernel to get it working? I am having the same problem and cannot figure it out.
Thanks.
First, my apology for not mentioning what I did. My laptop is in for repairs, but from what I recall I just enabled CONFIG_HOTPLUG located at General Setup >> Support for hot-pluggable devices. I use 2.6.14, so if you can't find it there it may be somewhere else for different kernel versions. Good luck!

User Profile Disk not being created

Hi,
I created a new 2012 VDI collection. Things seems to be working fine except for the User Profile Disks are not being created. From my understanding a .vhdx prefixed with the user's SID is supposed to be created when the user logs into one of the virtual
machines from the collection. I can see that a UVHD-template.vhdx" was created correctly but when logging on to one of the deployed virtual machines from the pool there is no other .vhdx files (except the template).
From what I've read the virtualization hosts must have write access to the share (they do). I can't seem to find any other requirements. I've searched through event viewer and found nothing. I'm not sure which logs to check on which server.
Anyone have any ideas what I'm missing?

Hi,
Thanks for your post in Windows Server Forum.
Kindly follow the below mention article and check the necessary steps for creating UPD, try to create new UPD.
1. Working with User Profile Disks on Session-Based Desktop Deployments
2. Easier User Data Management with User Profile Disks in Windows Server 2012
Hope it helps!
Thanks,
Dharmesh

Create handling units and assigning them as Packing Proposal for Sales Orde

Hi Friends
How to create handling units and assigning them as Packing Proposal for Sales Order Items in the background.
Could you please help to provide Input Parameters for BAPI_HU_CREATE for sales order OR is there any other program creating and assigning them to Sales Order line Items.
Thanks in Advance.
SR

Hi Friends
I created Handling Units with BAPI_HU_CREATE , Pack materials with BAPI_HU_PACK in to Handling Untis and assign handling units to sales order with BAPI_HU_CHANGE_HEADER . But These BAPIs are not doing packing sales order line items in to handling units . I have to go sales order and do sales order line item packing by clicking packing button.
Could you please help on how to do packing Sales Order Line items in the background with BAPIs.
Thanks in Advance.
SR

Creating Handling Unit

Hi All,
Can anyone guide me which BAPI/FM to use to create Handling unit?
And, How to update the delivery with the HU information?
Was able to get the Handling Unit number through FM V51P_FIND_HEADER given the packaging Material number.
Regards,
Raj

Hi Rajasekhar,
I have mailed you the document on Handling Units.
To create a Handling Unit you need to use the following BAPI Functional Module
BAPI_HU_CREATE
check the following Documentation:
FU BAPI_HU_CREATE
Text
Create Handling Unit with Items
Functionality
You can use this method to create non-assigned handling units without stock information. These handling units may also be created with items, if you like. Serial numbers can also be included for each handling-unit item at this point.
You can also create nested handling units by accessing this method more than once.
Example
Example 1:
Creating a non-assigned handling unit with packaging material PALLET with a "Planned HU" physical status:
HEADERPROPOSAL: pack_mat = 'PALETTE'
 hu_status_init = 'A'.
Example 2:
Following access of the above method (example 1), the return parameter HUKEY returns the ID of the handling unit that was created in the KEY = ID1 field. To pack the handling unit that was just created in another handling unit, call up the BAPI_HU_CREATE method again with the following import parameters:
IHEADERPROPOSAL: pack_mat = 'CONTAINER'
ITEMPROPOS AL: hu_item_type = '3'
lower_level_key = ID1
You have now created a nested handling unit (a pallet inside a container).
I suppose this will solve your problem.Also go through the document.
Thanks & Regards
Pawan P.Khilari
*Mark Helpful Answers
Message was edited by: Pawan Khilari

Which BAPI can Create handling Unit for VL02N.

Dear All,
Which BAPI can Create handling Unit for VL02N.
The Business is: VL02N, click head toolbar PACK, then call up handling Unit.
Thanks

Hi sun!
I'm facing the same requirement since three days and i'm not able to get it workin.
Did you resolve the problem and if yes which function modules did you use?
Thanks in advance!
Florian
Edited by: Florian Visintin on Sep 17, 2009 10:21 AM
Edited by: Florian Visintin on Sep 17, 2009 10:22 AM

Warehouse task not being created : Handling unit was not locked

Similar Messages

Maybe you are looking for