Warning: [39028] The features in Database do not match the defaults.

Hi,
We uninstalled obiee and installed it once again for some reason. I placed my repository in correct location, i created the data source with the same name. When i performed global consistency check for my repository it was showing me the warning ,
Warning: [39028] The features in Database " " do not match the defaults. This can cause query problem.
Also i'm unable to view data in the repository. But if i create a new connection pool i was able to view the data for that imported datasource alone, but the warning still remains the same.
I dont know where im going wrong, is there any configuration to be done? How can i set right this
Need help to solve this issue.
Thanks,
Princy

hi
go to repository
double click the connection pool name
go to Features tab..
click on Reverts to defaults and click OK and now check the consistency check..

Similar Messages

PWA site template with warning "Your Local Machine Time Zone does not match your current Sharepoint Regional Settings"

SharePoint 2010 (SP2010 SP1+ AU CU 2011) site built with Project Web Access template shows message in yellow "Your Local Machine Time Zone does not match your current Sharepoint Regional Settings."
KB Article http://support.microsoft.com/kb/2749599/en-us suggests applying Windows and SharePoint updates, but does not points to a specific update. Also suggests to enable "Always follow
web settings" for affected users who are in different time zone than the server time zone, but it does not work either.
Manjeet Singh

Hi,
According to your post, my understanding is that SharePoint 2010 (SP2010 SP1+ AU CU 2011) site built with Project Web Access template shows warning "Your Local Machine Time Zone does not match your current Sharepoint Regional Settings".
Users are getting this message even after correctly specifying and changing the timezone in their Sharepoint Settings. This is a common problem across the net, but we've found a workaround
that will eliminate this problem.
Step 1: Open your Web Database in your Browser
Step 2: Click the Arrow Under the Login ID (upper right corner)
Step 3: Choose My Settings
Step 4: Click the My Regional Settings Link
Step 5: Uncheck the 'Always Follow Web Settings' check and specify your time zone.
Step 6: Click OK
For more information, you can refer to:
Warning Message about time zone difference between your computer and the regional settings
of Sha...
Thanks & Regards,
Jason Guo
Jason Guo
TechNet Community Support

ORA-16821: logical standby database dictionary not yet loaded

Dear all,
I have a dataguard architecture with a primary and a standby database (for reporting stuffs). Since I upgraded physical standby to logical standby, I receive this error !
ORA-16821: logical standby database dictionary not yet loaded
If someone has an idea, should be great !!
Thanks
oldschool

Hi,
Ok I applied :
SQL> ALTER DATABASE STOP LOGICAL STANDBY APPLY;
Database altered.
SQL> alter database start logical standby apply immediate;
Database altered.
SQL>
And now I received this :
ORA-16825: Fast-Start Failover and other errors or warnings detected for the database
Cause: The broker has detected multiple errors or warnings for the database. At least one of the detected errors or warnings may prevent a Fast-Start Failover from occurring.
Action: Check the StatusReport monitorable property of the database specified.
What does it mean to check the status report.....
I found this about monitorable status report !!
DGMGRL> show database 'M3RPT' 'StatusReport';
STATUS REPORT
INSTANCE_NAME SEVERITY ERROR_TEXT
* WARNING ORA-16821: logical standby database dictionary not yet loaded
DGMGRL>
What can I do ?
Thanks a lot
oldschool
Edited by: oldschool on Jun 4, 2009 2:37 AM

Lookup-table and query-database do not use global transaction

Hi,
following problem:
DbAdapter inserts data into DB (i.e. an invoice).
Process takes part in global transaction.
After the insert there is a transformation which uses query-database and / or lookup-table.
It seems these XPath / XSLT functions are NOT taking part in the transaction and so we can not access information from the current db transaction.
I know workarounds like using DbAdapter for every query needed, etc. but this will cost a lot of time to change.
Is there any way to share transaction in both DbAdapter insert AND lookup-table and query-database?
Thanks, Best Regards,
Martin

One dba contacted me and made this statement:
Import & export utilities are not independent from characterset. All
user data in text related datatypes is exported using the character set
of the source database. If the character sets of the source and target
databases do not match a single conversion is performed.So far, that does not appear to be correct.
nls_characterset = AL32UTF8
nls_nchar_characterset = UTF8
Running on Windows.
EXP produces a backup in WE8MSWIN1252.
I found that if I change the setting of the NLS_LANG registry setting for my oracle home, the exp utility exports to that character set.
I changed the nls_lang
from AMERICAN_AMERICA.WE8MSWIN1252
to AMERICAN_AMERICA.UTF8
Unfortunately , the export isn't working right, although it did change character sets.
I get a warning on a possible character set conversion issue from AL32UTF8 to UTF8.
Plus, I get an EXP_00056 Oracle error 932 encountered
ORA-00932: inconsistent datatypes: expected BLOB, CLOB, get CHAR.
EXP-00000: export terminated unsuccessfully.
The schema I'm exporting with has exactly one procedure in it. Nothing else.
I guess getting a new error message is progress. :)
Still can't store multi-lingual characters in data tables.

Database link not working properly

I have to link to another database...I have created an entry in my TNS names on the oracle server and have used the following script to create the link:
CREATE PUBLIC DATABASE LINK DATA
CONNECT TO USERNAME IDENTIFIED BY PASSWORD
USING 'DATA';
Data is the name of the database sid, and I am able to connect to the server using the username/password@sid in sqlplus. Oracle tells me that the link is created successfully, however if I try to describe user_tables@data I get the following error:
SQL> desc user_tables@data;
ERROR:
ORA-02085: database link DATA connects to DATA.WORLD
Please help!
Jes

You will see this error when the global name of the remote database does not match what you have in your link. Although the link name might match the SID, the fully qualified link name does not.
You can either:
1) Set the GLOBAL_NAMES parameter to FALSE in the database in which you have created the database link.
2) Recreate the link so that the full link matches the global name of the remote db (query GLOBAL_NAME in the remote db if you don't know it)
Good luck!

There is a problem with the Outlook database. Your database could not be rebuilt. [-18000]

For home use, I recently changed from Windows PC to MacBook Air. I have an iPhone 4 which I synched without problem to the PC. Since I have used Outlook for years on Windows and trusted advisors assured me Microsoft Office on the Mac is the same as Microsoft Office on Windows, I decided to continue using Microsoft Office. Because I cannot get my Outlook calendar to sync reliably to iCal / iPhone and because I have found a small but meaningful number of features I use daily in Outlook Windows do not work on Outlook Mac, I have never been in so much pain!
The latest problem is Outlook does not complete startup. I get this error:
There is a problem with the Outlook database. To use the database, you must rebuild it using the Database Utility.
I run the utility but it never completes successfully.
Step 1 of 5: Scannning...
Step 2 of 5: Verifying...
Step 3 of 5: Copying records to new database...
Step 4 of 5: Recovering data...
Your database could not be rebuilt. [-18000]
I have found many articles about this problem but they all seem to assume that you can successfully start Outlook then you rebuild the database to fix data corruption in Outlook.
What if I Outlook never completes startup?

Here are the steps that solved the Outlook data corruption problem.
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macoutlook/your-datab ase-could-not-be-rebuilt/5caff467-3ab2-464a-9fe6-00ad913b5f2e
The question was: Your database could not be rebuilt
The key is to create a new Outlook Identity, remove the database file, then copy your data records into the new identity and use the Outlook database utility to rebuild the database.
It's a wonderful feeling to see Outlook start up successfully after a few days of downtime!

Get message " The local repository database could not be found or is corrupted"

Hi
I want to update the System drivers , but constanly getting the massage
"The local repository database could not be found or is corrupted"
not sure what to do
cannot find any reference to the error
Please assist
This is getting to me
Johan

Hi,
I have the same issue (on a windows 2008 R2 SP1)
I want to do a backup from my automation (a simple batch .cmd)
I'm doing this command:
C:\Users\Administrator>wbadmin start backup -backuptarget:s:\backup -exclude:s: -allCritical -include:C:,R: -quiet
wbadmin 1.0 - Backup command-line tool
(C) Copyright 2004 Microsoft Corp.
Retrieving volume information...
This will back up volume System Reserved (100.00 MB),New Volume(R:),DISK_S(S:) (Selected Files),Local Disk(C:) to s:\backup.
ERROR - The specified backup location could not be found or is not a supported backup storage location.
The only way to get this working, is working via UNC to the local drive S-drive
C:\Users\Administrator>wbadmin start backup -backuptarget:\\myserver\s$\backup -exclude:s: -allCritical -include:C:,R: -quiet
However, the backup succeeds with these warnings:
Retrieving volume information...
This will back up volume System Reserved (100.00 MB),New Volume(R:),DISK_S(S:) (Selected Files),Local Disk(C:) to
\\myserver\s$\backup
and giving a warning
The backup of volume DISK_S(S:) could not be completed. Error: The requested operation could not be completed due to a file system limitation
The backup operation completed with errors.
Looks like the wbadmin does not read the -exclude option?
Regards,
David

Could not render the database. Not enough memory.

This seems to be a big bug in Fireworks CS4. I am building a 10 page website. I only had the opportunity to insert about 10 high quality images into the project, and then tried saving the project as a Fireworks PNG. It appeared to Save successfully, however from that point on, any object I would click on, any layer I would select a message would appear.
"Could not render the database. Not enough memory."
Has anyone seen this before? How can I fix this?
I tried doing a workaround. I tried opening the saved file from Fireworks CS3. Before opening, it displays a message about insufficient permission in the registry. I click OK, and it opens in CS3. I can finally edit the project and make changes, and save it without problems. However, even after saving in CS3, I cannot open it in CS4 without getting the error message. It is not only on my machine. I send my project to others to see if they can open it via CS4, and they can't either. They get the same message.
I attached the PNG file, this is for a school project.
Any help is most appreciated.

I'm relieved to hear that. So I trust that your images are all nice and small, file-size-wise.
Okay! I trust you have already defragged your hard drive and turned off all those nasty TSRs that eat up your RAM. Fileswapping is usually what slows my computer down.
Check for scripts that might be running wild in the background. Can't think what they might be, but if something is looping and shouldn't be, you'll end up with less free RAM to move around in.
I haven't noticed the problem with lots of layers, but I haven't been watching, either. Have you experimented with turning off the layers that you are not actually exporting? I understand the convenience in keeping all those layers in there...it's a big timesaver in editing throughout a project. If all the layers are not needed in the image export, however, turn them off temporarily. That might save some elbow room.
It sounds as if your system fits the basics, but you might check:
Windows
1GHz or faster processor
Microsoft® Windows® XP with Service Pack 2 (Service Pack 3 recommended) or Windows Vista® Home Premium, Business, Ultimate, or Enterprise with Service Pack 1 (certified for 32-bit Windows XP and Windows Vista)
512MB of RAM (1GB recommended)
1GB of available hard-disk space for installation; additional free space required during installation (cannot install on flash-based storage devices)
1,024x768 display (1,280x800 recommended) with 16-bit video card
DVD-ROM drive
Broadband Internet connection required for online services*
Mac OS
PowerPC® G5 or multicore Intel® processor
Mac OS X v10.4.11–10.5.4
512MB of RAM (1GB recommended)
1GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on flash-based storage devices)
1,024x768 display (1,280x800 recommended) with 16-bit video card
DVD-ROM drive
Broadband Internet connection required for online services*
Rather than jumping to think it's a bug, try a test with 9 layers, or 8 layers. If only 10 layers and up provide problems, file a bug/feature report or contact someone in support.
As this is a user forum, we (other users) neither speak for Adobe nor know everything about the applications from a support viewpoint, so while we're always willing to offer opinions and frequently solutions, real bugs are not in our bailiwick.
Perhaps someone with a multi-layer difficulty can chime in here.
Beth

Question: 10gR2 database can not see the 11gR2 ASM diskgroup?

Hi there,
env:
uname -rm
2.6.18-92.1.22.el5xen x86_64
Single server(non-RAC)
note: we don't want to upgrade 10gr2 database into 11gR2 yet. But we created the 11gR2 ASM, then a 11gr2 database on ASM, and plan to migrate datafile in 10gR2 database to 11gR2 ASM
1. oracle 10gR2 installed first version: 10.2.0.3.0
2. then install 11gR2 Grid Infrastructure, and created ASM (version 11gr2)
$ sqlplus / as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Tue Oct 19 10:30:56 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Automatic Storage Management option
SQL> col name form a15
SQL> col COMPATIBILITY form a15
SQL> col DATABASE_COMPATIBILITY form a15
SQL> l
1* select name , STATE, COMPATIBILITY, DATABASE_COMPATIBILITY from v$asm_diskgroup
SQL> /
NAME STATE COMPATIBILITY DATABASE_COMPAT
ORCL_DATA1 MOUNTED 11.2.0.0.0 10.1.0.0.0
ORA_DATA MOUNTED 10.1.0.0.0 10.1.0.0.0
3. in 10gR2 database
sqlplus /
SQL*Plus: Release 10.2.0.3.0 - Production on Tue Oct 19 12:12:31 2010
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning and Data Mining options
SQL> select * from v$asm_diskgroup;
no rows selected
4. pin the node into css
# /u01/app/product/11.2.0/grid/bin/crsctl pin css -n mynodename
CRS-4000: Command Pin failed, or completed with errors.
Question: 10gR2 database can not see the 11gR2 ASM diskgroup?
please help
Thanks
Scott

What is the output of
olsnodes -t -n
Also, see unix error log and ohasd error log if you find anything in that

Database does not exist in the specified path

Just bought a USB 6009 DAQ and for some reason I now keep getting this error: "Database does not exist in the specified path" in VI Logger 2.0.1 it was working. Can anyone help??

Jared,
It sounds like VI Logger somehow lost its association with its
database. Please open MAX and check out the "Historical
Data"->"Citadel 5 Universe" entry. Under "My Computer" in the
right-hand pane, you should have a database called "VI Logger Data". It
must be spelled, spaced, and capitalized the exact same way. If you do
not have this database (which I suspect you do not), right click on "My
Computer" and select "Create/Attach Database..." The default database
path (if you want to have access to your old data) is C:\Documents and
Settings\All Users\Application Data\National Instruments\VI Logger,
with the database name as "VI Logger Data". If you want to create a new
database, then specify a new path.
If "VI Logger Data" does appear, a possible fix is to detach and
reattach it. Right click on "VI Logger Data," select
"Detach/Delete...," and chose the "Detach" option. Finally, reattach
the database as described above.
Hope this helps,
Ryan Verret
Product Marketing Engineer
Signal Generators
National Instruments

After upgrading ACS 3.3.1 to 4.2 on windows the local database is not working

Hi,
I have upgaded the ACS 3.3.1 for windows server to 4.2. Everything went fine but the local database is not working.
The CD is an upgrade kit from 3.x to 4.2 on windows. I tried to install directly the 4.2 I was able to install but integration with AD/LDAp is not working. Anysay its an upgrade kit so I cant expect it shoud work when install drectly the 4.2 but by upgrading from 3.3 to 4.2 everything should work fine.
I followed the upgradation path as recomended.
Also we have a requirment that once it is upgraded to 4.2 we need to shift the whole thing from the physical server to a virtual machine on VMware ESX server 3.5.
Can anybody pls guide me if anything else to do after the upgradation.
Thanks & Regards
Sachi

Hi Javier,
First of all I was facing a problem of restoring the old database of 3.3 to 4.2. Somehow I overcame that issue by following the below steps. Now local authentication is working fine but AD/other External database authentication is not working. As you told the setting for the unknown users are configured to fetch the credentials from the external database if it is not in the local database.
Do we need to do anything in the AD itself?
Regards
Sachi
Steps for ACS upgrade to 4.2 version
Below are the requested steps mentioned for the up gradation from ACS 3.3.2 to ACS 4.2.
        1)     Take a configuration backup from existing ACS. ACS--->System
configuration----> ACS Backup
2)    now if you have ACS 3.3.2 on server. take backup of the ACS
3)   Insert the cd or if you have the set up on the system then Run the setup of ACS 3.3.4. During the process it will prompt you to
upgrade existing configuration. Make sure you check that option else we will
loose the database. Now you need to hit next.next to finish the 3.3.4 upgrade.
4)     Once you are at 3.3.4, take a backup and keep it handy.
5)     Run the setup of 4.1.1. During this process it will prompt you to
upgrade existing configuration. Make sure you check that option else we will
loose the database. Now you need to hit next.next to finish the 4.1 upgrade.
6)Once you are at 4.1.1.24 take a backup and keep it handy.
7)     Run the setup of 4.2. During this process it will prompt you to
upgrade existing configuration. Make sure you check that option else we will
loose the database. Now you need to hit next.next to finish the 4.2 upgrade.
8)     Once you are at 4.2 take a backup and keep it handy. Now run the
patch 12 and take a backup again.
9)     Now fresh install 4.2 on your new production server and install patch
12. Restore the 4.2 patch 12 backup and you should be all set.

TS3212 I just got a warning that the Itunes 10.6 that I just downloaded could impare or disable my XP system, could someone please tell me why? I have not upgraded from XP due to several reasons and now I don't know what to do. I had Itunes before on my c

I just got a warning that the Itunes that I just downloaded (10.6) could impare or destablize my system- I have had Itunes on my computer before but when I plugged in my Ipod it told me I needed to uninstall Itunes and reinstall itunes all together. Now I don't know what to do. I have a Sony computer that runs on Windows XP and then I have an Ipad, Iphone, and Ipod that I sync everything with What do I do? Do I continue installing? And, if I don't install how will I ever get all my "gadgets" to work properly without being able to download Itunes 10.6? Need Help!!!! I'm not very tech savey...just a grandmother who loves her gadgets:)

What's the precise text of the message, please? (There's a couple of different ones I can think of that you might be getting.)

Error creating a new user profile service application: The specified database is not a valid synchronization database

When trying to create a new user profile service application on a new SharePoint install I get the following error:
"The specified database is not a valid synchronization database"
The installation then fails and does not create the third database.
I found some threads with similar problems but it involved upgrading an existing db. In this case we want to create a new one. Here is the relevant ULS log info:
Starting schema provisioning of SynchronizationDatabase 'SP15_TEST_ENT_SyncDB'
Provisioning the SP15_TEST_ENT_SyncDB database with the script at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\Template\SQL\SPS\drop_procs.sql.
Provisioning the SP15_TEST_ENT_SyncDB database with a script stream.
Ensuring that the SP15_TEST_ENT_SyncDB database exists . . .
The SP15_TEST_ENT_SyncDB database does not exist.
It will now be created.
Setting the AutoClose option to False on the database SP15_TEST_ENT_SyncDB.
Setting the ArithAbort option to True on the database SP15_TEST_ENT_SyncDB.
Setting the TruncLogOnChkpt option to True on the database SP15_TEST_ENT_SyncDB.
Starting schema evaluation of existing SynchronizationDatabase 'SP15_TEST_ENT_SyncDB'
Validate Database: validating sync database
Validate Database: validation failed: Error code -2
Application error when access /_admin/NewProfileServiceApplicationSettings.aspx, Error=The specified database is not a valid synchronization database
at Microsoft.Office.Server.Administration.SynchronizationDatabase.Provision()
at Microsoft.Office.Server.Administration.UserProfileApplication.Provision()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.DoCreateApplication()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.OnOkButtonClick(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Microsoft.SharePoint.Administration.SPDatabaseException: The specified database is not a valid synchronization database
at Microsoft.Office.Server.Administration.SynchronizationDatabase.Provision()
at Microsoft.Office.Server.Administration.UserProfileApplication.Provision()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.DoCreateApplication()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.OnOkButtonClick(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.SharePoint.Administration.SPDatabaseException:
The specified database is not a valid synchronization database
at Microsoft.Office.Server.Administration.SynchronizationDatabase.Provision()
at Microsoft.Office.Server.Administration.UserProfileApplication.Provision()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.DoCreateApplication()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.OnOkButtonClick(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
I Tried to create another one under a different name (databases also) and I get the same error.
The SharePoint instance has the march mandatory update installed. The sql instance we are using is an existing SQL cluster for other SharePoint poc's.
Has anybody seen this issue before?

I had the same problem and could not figure out what was wrong for the longest time. I then had the idea to check in the model system database to see if there were any extra custom tables in that database. Any tables that are in the model database
are put into any new database when it is created. I had some custom tables in the model database so I deleted the custom tables in the model database and deleted the failed user profile service application and its databases and then tried to recreate
the user profile service application again and it worked with no errors

Unable to refresh the schema of FIM MA.Getting an error in Event viewer ""the current version of database is not compatible with the one expected by Forefront Identity Manager service. The current version of database is : 1116. The expected version is :1"

Hi,
We have installed FIM MA with an account that have all the sufficient rights.It got created successfully and worked for Full Import and Full Sync. But, due to some version incompatabilities, we have installed a patch.PFB link for the patch.
http://support.microsoft.com/en-us/kb/2969673/en-us
Now, we are trying to refresh the schema of FIM MA. While doing that we are facing an error "Failed to connect to database". The user account with which we are connecting has read and write permissions on DB.In the event viewer some errors are
logged like "the current version of database is not compatible with the one expected by Forefront Identity Manager service. The current version of database is : 1116. The expected version is :1122" with event ID 3. PFB images for more detailed
view.
Please advice how to fix the issue.
Thanks
Prasanthi.

Hello,
seems to me that you maybe only updated the syncengine but not portal/webservice.
I had that error once after an recovery from scratch and forgot one of the hotfixes to apply to all services.
-Peter
Peter Stapf - ExpertCircle GmbH - My blog:
JustIDM.wordpress.com

Database does not contain a URL for the file

How do I find out what file/update this is:
The file digest/hash does not exist in the SUSDB, but I have no idea looking at the windowsupdate or softwaredistribution.log what file it is referring to.
SELECT [FileDigest]
      ,[DigestAlgorithm]
      ,[AdditionalHash]
FROM [SUSDB].[dbo].[tbFileHash] fh
WHERE fh.FileDigest =0x15B82F101E79C1E2181E43CC8A3CC137CBFDC91D
or fh.AdditionalHash =0x15B82F101E79C1E2181E43CC8A3CC137CBFDC91D
0 rows found
Softwaredistribution.log
2014-10-07 23:07:04.319 UTC   Error   w3wp.5   ClientImplementation.GetExtendedUpdateInfo   System.ArgumentException: The database does not contain a URL for the file 15B82F101E79C1E2181E43CC8A3CC137CBFDC91D.
Parameter name: fileDigests
   at Microsoft.UpdateServices.Internal.DataAccess.ExecuteSpGetFileLocations(Byte[][] fileDigests)
   at Microsoft.UpdateServices.Internal.DataAccessCache.GetFileLocations(Byte[][] fileDigests, DataAccess da)
   at Microsoft.UpdateServices.Internal.ClientImplementation.GetExtendedUpdateInfo(Cookie cookie, Int32[] revisionIds, XmlUpdateFragmentType[] fragmentTypes, String[] locales)
   at Microsoft.UpdateServices.Internal.ClientImplementation.GetExtendedUpdateInfo(Cookie cookie, Int32[] revisionIds, XmlUpdateFragmentType[] fragmentTypes, String[] locales)
   at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.Web.Services.Protocols.LogicalMethodInfo.Invoke(Object target, Object[] values)
   at System.Web.Services.Protocols.WebServiceHandler.Invoke()
   at System.Web.Services.Protocols.WebServiceHandler.CoreProcessRequest()
   at System.Web.Services.Protocols.SyncSessionlessHandler.ProcessRequest(HttpContext context)
   at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
   at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)
   at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)
   at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
   at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
   at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
   at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
   at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)

How do I find out what file/update this is:
Hows about.. rather than chasing a rabbit down the hole doing whatever you think you're doing...
We start with this: What problem is it that you're actually trying to solve?
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Warning: [39028] The features in Database do not match the defaults.

Similar Messages

Maybe you are looking for