Warning a client is using a different version of the ormi protocol 1.3 != 1

Hi All,
I am trying to access a bpel process deployed on 10.1.2.0.2 bpel process manager via java client. I am getting the below error on the bpel process manager as,
Warning a client is using a different version of the ormi protocol 1.3 != 1.1
I am using the following jars at client side,
ejb.jar
oc4jclient.jar
oc4j-internal.jar
optic.jar
orabpel.jar
orabpel-common.jar
xmlparserv2.jar
Can you please help me to solve this issue.
Appreciate your help!.
Thanks,
Levey

I believe there is a patch available, which allows cross version ORMI compatibility, which needs to be applied to the 10.1.2 release:
http://download-west.oracle.com/docs/cd/B25221_04/web.1013/b14427/rmi.htm#JISVC6301
-steve-

Similar Messages

How to use two different versions of the same jar within one project

Hi everybody!
I have a big problem while integrating different web service clients within one bigger java project. Both implemetations need some jar files to work but demand different version. So, i would like to know if there is any way to tell which implementation should use which version! Anyhow i add those jars to the classpath makes working only one or the other webservice working but never both! Any ideas somebody?
Best regrads,
Stefan G�tz

Of course do have the jar files different names but the classes inside of them are the same ... means that the standard system classloader can distinguish them. When you add a jar to a classpath the name actually dosent matter.... any other ideas, please?
PD.: i tryed to add a manifest file to the one jar which makes use of one of the dublicated jars to specify which jar to take direcly but it makes no difference since once classes loaded they cant be distinguish ....see:
http://java.sun.com/docs/books/tutorial/ext/basics/load.html

How to use two different versions of Firefox at the same time on Snow Leopard?

I recently upgraded to Firefox 4.0 on my 27" iMac running Snow Leopard 10.6.7.
Previously, I was using Google's "Page Speed" along with Firebug in Firefox 3.6.15 to optimize images in my web pages, and to find other areas to optimize.
Page Speed is not yet compatible with Firefox 4.0. I wrote to Google about this some time ago -- no answer yet.
If I run Firefox 3.6.15 in order to use Page Speed, I run into a few problems afterward when I start using Firefox 4.0 again, since they both use the same "Firefox" folder in my "Application Support" folder.
How can I set it up so that I can have two separate "Firefox" folders in my "Application Support" folder?
Or is there an easier way to use two different versions of Firefox simultaneously, even if one has extensions and/or plug-ins installed which are not compatible with the other version?
Thanks for a great browser!

Please disregard my question. I just conducted more web search and learned how to use Firefox's profile manager in order to make a separate profile for Firefox 3.6.15.
You can find instructions on this page:
http://support.mozilla.com/en-US/kb/Managing%20profiles#os=mac&browser=fx35
'''A small tip:'''
If your Firefox app is named anything other than "Firefox" -- say for example "Firefox 3.6.15" -- when you follow the instructions at the above link, make sure you escape the blank space that is before the version number by adding a backward slash before it, when you type the command string in the Terminal. In other words, in that string, you should use this:
Firefox\ 3.6.15
I hope that helps someone.
WW

Hotsync two different Palms that use a different version of Palm Desktop

What I need to know is I have a Palm IIIe & a Palm Zire 31 both of which use a different version of Palm Destop can a install both versions of Palm Desktop on a single computer and then be able to hotsync both devices. Or will both of them hotsync with the same version of Palm Desktop.
Palm Desktop 4.1.4e for the Palm Zire 31
Palm Desktop 4.1.4 for the Palm IIIe
Post relates to: Zire 31
This question was solved.
View Solution.

Hello obsolete.
I haven't tried your specific combination of devices before, but I think it should work. I would install Palm Desktop 4.1.4 and then sync the Palm IIIe first. Once you know that the Palm IIIe is syncing normally, I would then install Palm Desktop 4.1.4e on top of 4.1.4, upgrading it. Then sync the Palm IIIe to make sure it is still working. If it is, then attempt to sync your Zire 31.
Since you will be syncing two devices to the same computer, I recommend that each device have it's own unique HotSync ID to prevent things from going bad on you.
Alan G

Different versions of the same app on the app store

Is it possible to let users download the different versions of the same app from the App store,( even though I have not seen it but just wonder whether it is possible) ?
If not then can we have different releases of the same product with different feature set.
This question is applicable for iPhone as well.
Thanks

Wouldn't do you any good, as you need to be a registered developer to use the forum. Just contact one of the developer's of an app you're interested in and ask the developer directly.

Versioned deployments: how to deploy different version of the same app ?

I 'd like to deploy on a server (single instance) different versions of the same web application, say:
webapp1.war
webapp2.war
webapp3.war
The wars have the same ContextRoot.
It is possible to version them with an attribute in MANIFEST.MF, but is it possible to have the N applications ACTIVE and running ? I'd like that one IP will be served from webapp1, another IP from webapp2, another IP from webapp3, etc.

It may your 'requirement' but I have serious doubts that the app review team will approve it. Save yourself the waste of time and follow my original suggestion of one app. That's the only correct 'method' (w/IAP of course) that will have a chance of success.
See the iOS Human Interface Guidelines and the App Review Guidelines before you go any further. In the case where you need 'official' guidance, consider using support event w/DTS

Reporting Services will not automatically use a different replica for the report server databases when a failover occurs. How to overcome this issue

Reporting Services offers limited support for using AlwaysOn Availability Groups with report server databases. The report server databases can be configured in AG to be part of a replica; however Reporting Services will not automatically use a different
replica for the report server databases when a failover occurs. How to overcome this issue? is there any workaround for that..
Rahul

Hi.
With the AlwaysOn listener you should have a single DNS name to connect to regardless of which cluster node is active. Are you using the listener service? If not, please refer to the link below.
http://msdn.microsoft.com/en-us/library/hh213417.aspx#AGlisteners

HT4275 Can I use a different batteries than the apple ones 1900 mAh, like 2500 mAh which are the usually sold in stores?

Can I use a different batteries than the apple ones 1900 mAh, like 2500 mAh which are usually sold at any store?

Yes. They should work fine.

EJB was compiled by a different version of the Weblogic Server

I got the following error message when attempt to startup weblogic server to deploy my ejb.
<The EJB deployment named: ejb_test was compiled by a different version of the WebLogic Server.>
<... cannot be redeployed while the server is running ...>
Anybody has any clue about this? TIA.
Cheers. KokHwa.

See inline:
KokHwa wrote:
I got the following error message when attempt to startup weblogic server to deploy my ejb.
<The EJB deployment named: ejb_test was compiled by a different version of the WebLogic Server.>
Exactly what is says. You are deploying an EJB that was compiled with a
different Weblogic version (might be a different SP or a previous
version) that the one you are deploying on. Recompile with the same
version as the deployment and it should be fixed.
<... cannot be redeployed while the server is running ...>
This message is the same. Because you have some of the classes of the EJB
in your server classpath you will not be able to redeploy that EJB but apart
from that it's harmless. To redeploy after changing the EJB you'll have to
restart the server.
>
Anybody has any clue about this? TIA.
Cheers. KokHwa.
--dejan

HT203088 I have the CANON REBEL T5 1200D, and when i connect it to my mac which is 10.10 the new OS X YOSEMITE it says that it "Cannot be used with this version of the operating system" why does it say that?

I have the CANON REBEL T5 1200D, and when i connect it to my mac which is 10.10 the new OS X YOSEMITE it says that it "Cannot be used with this version of the operating system" why does it say that if my camera is listed under the supported digital cameras for OS X YOSEMITE?

Put simply, the minimum system requirements for iTunes have changed. You need a Mac running at least OS X 10.6.8.
It's best you look online to see if your model of Mac can be upgraded to at least 10.6.8 "Snow Leopard". It should still be possible to order a copy of Snow Leopard if so.

Good afternoon! We purchased the product Adobe master collection 5.5 AOO Litsense RU. Distribyutiv program has been lost, and now we can not find it on the site. There we find different versions of the program other than Russian. Please tell me where to d

Good afternoon! We purchased the product Adobe master collection 5.5 AOO Litsense RU. Distribyutiv program has been lost, and now we can not find it on the site. There we find different versions of the program other than Russian. Please tell me where to download it?

Voronello volume license installation files are available under the end user or deploy to account at https://licensing.adobe.com/.

Updated pages on 11/25 but it in application it is saying there is an new version for $19.99. Is this a different version or the same?

updated pages on 11/25 but it in application it is saying there is an new version for $19.99. Is this a different version or the same?

Launch Pages.
From the Pages menu bar click Pages > About Pages
The latest version available is 5.0.1
If it's 5.0.1, your currently installed copy of Pages is up to date.

Why do different versions of the LabVIEW Run-Time Engine not compatible?

LabVIEW Run-Time Engine to become more and more big
Why do different versions of the LabVIEW Run-Time Engine not compatible?
" 一天到晚游泳的鱼"
[email protected]
我的个人网站：LabVIEW——北方客栈 http://www.labview365.com
欢迎加入《LabVIEW编程思想》组——http://decibel.ni.com/content/groups/thinking-in-labview
Solved!
Go to Solution.

jwdz wrote:
LabVIEW2020 ....... ，it look like?
You need to express your ideas more clearly. We cannot fill in the blanks and read between the lines if the post has no substance.
jwdz wrote:
It will affect the future development of LabVIEW, right?
What is "it"?
There are many things that affect the future development of LabVIEW, starting with NI management, all the smart people in LabVIEW development, the economy, the LabVIEW users, etc.
If you are worried about the increasing size of the distribution, the good news is that the cost of data storage and data transmission has dropped much more dramatically. Even though newer versions are bigger due to great and welcome new features, the improvements in infrastructure have actually made the distribution and storage significantly easier over the years and will continue to do so. Trust me!
Nobody wants to go back to a LabVIEW version that fits on a floppy disk!
LabVIEW Champion . Do more with less code and in less time .

I am getting two different versions of the App Store in iOS 6.

I am getting two different versions of the App Store in iOS 6. One is the new one and sometimes when I open it it goes to the old one and says cannot connect to the App Store.

I am having the same problem, but I think I might know what's causing it. I just updated my girlfriend's iPhone 4S (same phone as mine) to iOS 6 and was surprised to find that her app store is working just fine. When I opened hers, however, I did notice that the "Categories" and "Top 25" buttons are totally different; and those happen to be the two buttons that are not working for me. Mine shows the same that yours does, while hers has the "Genius" and "Charts" buttons in the place of the two that are not functioning for me. I believe these old buttons are no longer active and therefor are bombing out when attempting to access them.
Now I said I think I may understand the problem, but unfortunately I have no idea what the solution may be. Hopefully this tread doesn't fade away and our problem gets addressed.

The upgrade patch cannot be installed by the windows installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program

trying to install an update patch for Citrix xendesktop 7.5 and the error when I click on the msi patch is "the upgrade patch cannot be installed by the windows installer service because the program to be upgraded may be missing, or the upgrade patch
may update a different version of the program"
The application was installed 2 days prior and works fine but the patch will not install.
Any ideas?
Wendy2014

Yes let's see if there is any error occurs in installation log.
Meanwhile from the error message, the possible cause is that a part of the application is missing such as a registry key with app version. In this situation you can first test to reinstall/repair the application though it is still working fine - see if issue
persists after reinstall the app.
Meanwhile you could also contact Citrix about this issue. It may be a common issue and Citrix may provide a quick fix for it.
If you have any feedback on our support, please send to [email protected]

Warning a client is using a different version of the ormi protocol 1.3 != 1

Similar Messages

Maybe you are looking for