Warning about disabled printer device in the Solutions Center.

Hi,
I am getting a warning under 'Devices' in the solutions center saying that a printer, HP Officejet 4500g-m, is disabled. I use the printer every day and it appears in the device manager as enabled and working. Why is the Solutions Center marking is as disabled, and is there a way to get this warning removed since the printer is installed and is working?
I run Windows 8 on T430s

i want to reinstall ap printer driver by downloading 1 as when i go 2 print it goes to a save box so i assumed cos my driver may have gone wrong . i wanted 2 remove printer an then reload it but it will not uninstall via add and remove programs 
please advise 

Similar Messages

  • Adding a 2nd device to the Solution Center software

    I have and Officejet 6500 with the Solution Center software.  How can I add another HP printer to the software?  At one time they both showed up, but I had problems with the driver and when I reloaded it, the second printer was gone and hasn't come back.

    Hi,
    Since this printer uses a different software it cannot be added to solution center.
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • How to add Scanjet G4050 to the Solution Center

    Dear Forum,
    Recovering from the 'Device XYZ lost connection to the Solution Center' (see other thread), I have one point unresolved: Getting the Scanjet G4050 back as a device in the Solution Center, where it has been working properly next to my Photosmart C410b. Some information:
    - Previously, The Photosmart C410b and the Scanjet G4050 were both present and working properly in the Solution Center
    - Windows 7 Ultimate
    - Photosmart C410B working properly in the solution center, used install software V14.3
    - PC connected wired to network
    - Photosmart C410b connected wired
    - Scanjet G4050 connected via USB (obviously)
    - HPPSDr reports an error when performing the 'HP Twain scan' test on the G4050:  "A required software component was not found or improperly installed. Reinstall the HP Photosmart software that came with the device, and try scanning again / 4,[(2, 0, 80040154},{3, 56, 0}]" (needless to say I tried this several times...)
    - Front panel button from Scanjet triggers an error as well:  "The HP imaging device was not found. Try the following step, try bla bla bla' / 8,[{1, 0, -2147221164}]
    - Also tried the use V13 of the G4050 software, but no success either.
    - Device Manager mentions the "HP Scanjet G4050" properly installed, driver date 5/24/2012, Driver version: 14.0.0.0
    Questions: which modules shall be installed, which version and how can I verify that?
    Any suggestions?
    W.

    Still searching for a solution in the various blogs but no luck.
    Additional info:
    - in my previous post, I mentioned a version v13, this is probably more likely V3 as the filename is 'setup_full_G4000_3.exe' (I seem to have downloaded this file in Sept 2012 and used it for my initial install when setting up this PC, where it worked OK). I apologies or any confusion.
    - Scanning with the G4050 from MS Paints works OK
    - with the V3 installation, I do NOT install ‘OCR Software by I.R.I.S’, ‘HP Update’ nor ‘HP Photosmart Essential 3.5’, Can I do without them? 
    - if I use V14.5 full featured installation, I do not see an option to select the Solution Center to be installed
    - if I use V3, I do see an option to select the Solution Center to be installed
    - in one post a HP employee mentioned that the more recent Win7-64 installer for the G4050 did NOT have solution center anymore. Is this correct? Should I therefore use V3?
    - If I install the V3 version, it fails at installing the device driver. If I follow the suggestion offered, I install the basic feature driver V14.5 and can continue the V3 full feature installation without errors, however, no G4050 appears in the solution center
    - many post hint about some component incorrectly installed or missing. Can someone advice me what to clean/remove/uninstall? I have used CCleaner to remove a lot of useless stuff.
    -Others suggest Microsoft install clean up: any suggestion on how to use in this case?
    - neither of the installer V3 or V14.5 offer the 'uninstall_l1/2/3/4' batch files
    W.

  • Since i was updated with the solution center, i cannot print envelopes

    My printer is a HP officejet 4215 operating system is windows vista 64-bit, after installing the solution center I can not print  envelopes or greeting cards because the printer prints in different ways and locations

    You are correct.  Syncing should transfer any purchased media, including videos, from your device to your iTunes library provided your computer is authorized for the Apple ID used to make these purchases.  You mentioned that you have uninstalled iTunes before, but if you didn't follow this guide exactly, uninstalling iTunes and all of its components in the order specified, it may not have been successful so you should try again:  Windows XP or Windows Vista/7.

  • Is there any talk about adding a device to the ipad so that you can use it as camera like ipad2

    Is there any talk about adding a device to the ipad so that you can use it as camera like ipad2

    James-
    As Jeanne mentioned, it can work as long as the added device is a camera, and you have the iPad Camera Connection Kit.  The kit contains two adapters, one for an SD camera card and one that accepts a USB card adapter or cable from your camera.
    With regard to your basic question, Deggie is correct.  It does NOT work like a built-in camera, so you can't use it for video calls.  You have to take pictures with the external camera and transfer them to the iPad.
    Fred

  • What is the Command to disable Printer Sharing via the Terminal?

    What is the Command to disable Printer Sharing via the Terminal?

    cupsctl is the command.
    man cupsctl(8)
    Hope that helps.

  • HT204135 Since I upgraded to OS X 10.8 my Canon MP480 printer scanner prints OK but the Solutions Menu icon for scanning is crashing every time I try to scan. Any solutions? Thanx

    Since I upgraded to OS X 10.8 my Canon MP480 printer scanner prints OK but the Solutions Menu icon for scanning is crashing every time I try to scan. Any solutions?

    I had to contact Canon Tech Support and had to re load the driver softwear using the OS X 10.7 choice, since the 10.8 choice is not there yet. Also had to download the opener and after 45 minutes I had solved the problem. The steps are too many to go into all the details but that is the genral idea. It should work for others.

  • Why does the solution center prompt for cd every time?

    My HP 8500 constantl;y prompts for me to insert the CD each time I try to scan. I have lost the CD, and just paid $10 to get a new one, but it is very annoying! How do I stop this?

    Hi Tom,
    There is something missing in your Scanning software.
    The Solution Center is like a dog with a bone about missing stuff.
    Something to try/consider:
    See the Solution on this Post - it has the information that might help you correct your Solution Center woes.
    http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/cannot-open-solution-center/m-p/110924...
    If, for some reason, you cannot download new software for your printer as outlined in the above Post,
    and you really do not want to wait for your new CD, then you can Uninstall the Solution Center Software from your computer.  See the warning below.
    Uninstalling your Solution Center:
    BE AWARE: If you elect to uninstall Solution Center to make it stop annoying you...Your printer might still work after you reboot and let the computer try and install some standard drivers - HOWEVER, it will only work with whatever "bare bones" drivers are available on your system.  It might not work at all.  It depends on your Operating system, whether there are enough HP standard drivers for your printer to run the basic printer HP8500 functions, and whether things get tangled up when you uninstall the printer software.  It could go well, or it could become a nightmare and you could be more unhappy than you are right now.
    The very best scenerio:  You find at the Solution Center link a way to download the Full Featured Software for your HP8500 printer and it fixes your scanning error.
    I hope this helps.
    Say “Thanks!” by clicking Kudos Star next to the Post that helps you.
    Mark a Post “Accepted Solution” to say your issue is solved.
    Kind Regards,
    Dragon-Fur

  • How do I get a "transfer images" button to show up in the solution center?

    How do I get a "transfer images" button to show up in the solution center for my officejet 6500 709a on XP?
    Scan buttons are displayed and work, as does print.

    What installing the twain plug-in, you mean? Go to your applications folder. Find the Adobe Photoshop Elements 11 folder. Look in there for a folder called support files, then for a folder called optional plugins. In the Optional Plugins folder, there should be a folder called ImportModules. Just drag that from the Optional Plugins folder to the regular Plugins folder.
    This will be infinitely easier to do if you put your applications folder window into list view, not the default icon view. To do that, click this button at the top of the window:

  • Hello everyone, How do i add another printer to my HP Solution Center?

    I have an HP 6500 that comes up on the solution center. I also have an HP C8180 hooked up to my computer and would like to scan etc from the HP Solution center, how do I get the 2 printers to figure on the Solution Center?

    Tell us what you've tried and where you are having trouble. Tell us the printer model. Do you have the latest drivers? How are you connected to the printer? Lots of questions... You say add another printer. Please clarify.

  • I have A PhotoSmart C 6180. I can't get the Solution Center software

    Where can I find something that will download on 64bit Vista for thePhotoSmart C6180?  My harddrive was replaced and my backup did not include the printer drivers.  I have loaded everything and it prints fine, but I can not scan as the Solution Center is missing.  It says that if the printer is prior to 2011 that the center is not available and the disc won't load on 64bit. 
    Is there a patch or something that can make this work
    This question was solved.
    View Solution.

    Hi,
    if you use the pritner through a USB connection, open the Control Panel and select Printers, right click any instance of the printer and Delete it.
    Next unplug the USB and reboot your PC prior installing the printer. (For network connection simply skip to the next step).
    Next download and install the following software by following the steps on screen, that will add full functionality as the HP Solution Center software:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-47461-2&cc=us&dlc=en&lc=en&...
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Hide/Disable Print button on the Adobe form for my user

    Hi
      How do I Hide/Disable my print option for the user viewing my Adobe form shown using WD for Java application.
    Regards,
    Murali.

    Hello Raja Sekhar,
    This object is not available anymore in Designer 7.1. This setting can now be achieved through a web dynpro (Java) API (interface <a href="https://media.sdn.sap.com/javadocs/NW04s/SPS7/wd/com/sap/tc/webdynpro/clientserver/adobe/pdfdocument/api/IWDPDFDocumentAppearance.html">IWDPDFDocumentAppearance</a>). In web dynpro ABAP you would need to use the method handler of the <b>InteractiveForm</b> UI element (IF_WD_IACTIVE_FORM_METHOD_HNDL, SET_HIDE_TOOLBARS).
    Regards,
    Philipp

  • Is there a way to only install print drivers plus HP Solution center?

    I have a HP PSC 1510v AIO printer.  I just re-installed Windows XP Pro and would like to install the software.  However, I do not want all the other software installed, only the print drivers and the HP Solution Center.  I have downloaded the print drivers from the HP website, but cannot find only the HP SC.
    Can anybody tell me if this is possible, and if so, how do I get the HP SC software?
    This question was solved.
    View Solution.

    Still no-go.  Here is what I did:
    1- Uninstall all HP software (I only have the 1510 printer from HP)
    2- Reboot
    3- Run the 4 batch files that remove HP stuff.
    4- Reboot
    5- Run regedit and delete all known HP references.  Some I was not sure about, so I left those alone.
    6- Run CCleaner and the registry cleaner portion.
    7- Reboot
    8- Reinstall the software using the CD with the software.
    What I end up with is the printer works and Solution Center will start, but it shows "No device found".  From there, if I try to install the printer, it locks up the computer when the install software is searching for the printer.  I left this run for 60 minutes, so I am allowing enough time for it to install.  BTW, in step #8 above, the install directory shows as the directory I specified in the very first install I did, so all the uninstallling I am doing is not getting every last bit.
    I am stuck!  Any ideas?

  • Unknown device in Lenovo Solution Center Helix

    It's not causing any problems, but it's killing me to know there is an unknown device that I can figure out what it is!!!  Talk about Fly in the Ointment.
    Why is it there?  Why doesn't windows not know what it is?  What's it's motivation?
    No external devices plugged in, wireless printer driver installed and working correctly. 
    This is one for Sherlock, or THE LENOVO COMMUNITY
    I looked in device manager, nothing is popping out saying "Hey I'm unknown"
    Lenovo Solution Center sees it but doesn't have a fix for it, and it gives me that smug number 1 with a red circle around it under check up (the nerve!).  Taunting me that something is not right and there's nothing I can do about it.
    Help me Obi Wan Kanobi, your my only hope!
    Solved!
    Go to Solution.

    Lenovo Solution Center currently has a bug that happens on systems with touchscreens, it shows an unknown device like you say, even though there isn't anything wrong.
    There is supposedly an update to LSC coming this week or next, it should fix this bug.
    And there is something you can do about it, click on the "remind me" option and then select "never", then LSC won't bug you about this non-issue anymore.  Sorry for this inconvenience caused by LSC.
    http://support.lenovo.com/en_US/detail.page?DocID=​HT076749

  • 'Unknown device' in Lenovo Solution Center, but not in Device Manager

    Even with all the latest updates installed, I still get this annoying warning from Lenovo Solution Center
    'Unknown device' - status 'not installed' 
    Control Panel / Device Manager gives no signals something is wrong.
    why?!
    Details:
    Computer: Thinkpad Yoga (TPY)
    OS: Windows 8.1 all updated
    Lenovo Solution Center version: 2.2002 / revision 17630
    External device attached to TPY:  OneLink Pro  (also has latest driver = Realtek 8.10.1009.2013)
    Thanks in advance
    Olof

    henk wrote:
    It seems to me you are missing some update from Lenovo. I had the same issue, however just recently after updating any available software/drivers for the TPY the message has disappeared.
    Glad to hear the problem is solvable. Regarding missing updates, I honestly would not know which one. 
    Lenovo's own update programs ('L-Update and Drivers' & 'L-System Health and Diagnostics') inform me that all drivers are up to date.

Maybe you are looking for