Warning: accessing obsolete X509Anchors causing stall

My MBP has been stalling more and more in recent weeks. The symptom presents itself as everything freezing (including the clock) for several seconds to as many 15 or 20 and then suddenly everything starts working again. I've been checking the Console and I see an endless stream of error messages containing "
Warning: accessing obsolete X509Anchor" and prefaced by an application name. The culprits include iCal, Safari, WebProcess, AddressBookSourceSync (pretty prevelant), iTunes, etc. Basically, any app that is communications related somehow. I looked in my Keychain and found a keychain named X509Anchors but it's empty.
Any thoughts? This is driving me crazy.

Hi,
This one stumped me quite a while as I saw the same problem on my 10.5.x client. After some searching, I found that /Library/Preferences/com.apple.security-common.plist contained references to X509Anchors and X509Certificates. That was the only place I could figure that Keychain Access was finding them.
By the way, I found the references using Terminal as follows:
$ sudo grep -i -r X509Anchors /Library/Preferences/*
The file was last changed in 2005 so on a hunch, I renamed it to com.apple.security-common.plist.bak, then logged out and back in. I renamed it in the Finder.
And VOILA, when I opened Keychain Access, the funny round boxes and duplicate copies of login.keychain were all gone from the list and I had no more entries in the Console about accessing obsolete keychain X509Anchors!
Now if I could just merge my old keychain (accountname.keychain) into my login.keychain, then all would be really good.
Just as an aside, when I upgraded to 10.5 from 10.4, my finder Sidebar under Places was messed up with duplicate entries and a Desktop icon that didn't work right. I also found that when I deleted ~/Library/Preferences/com.apple.sidebarlists.plist that the problems went away.

Similar Messages

SystemUIServer[320] Warning: accessing obsolete X509Anchors

I'm getting the following message repeatedly in the console:
SystemUIServer[320] Warning: accessing obsolete X509Anchors
Any thoughts on how to get it to go away?

is there something wrong with your menu bar? if not just ignore that message. trying to fix every console message is an exercise in futility.

Warning: accessing obsolete X509Anchors - revisited

I have been seeing multiple apps generating the error message "Warning: accessing obsolete X509Anchors" and found this thread which had one solution:
http://discussions.apple.com/thread.jspa?messageID=7660496
However on my system I do not see the preferences file (com.apple.security-common.plist) that the solution refers to. Anyone have an idea of how to get rid of these? Sounds like it has something to do with the Keychain Access and older keychain files/format.

Hi,
This one stumped me quite a while as I saw the same problem on my 10.5.x client. After some searching, I found that /Library/Preferences/com.apple.security-common.plist contained references to X509Anchors and X509Certificates. That was the only place I could figure that Keychain Access was finding them.
By the way, I found the references using Terminal as follows:
$ sudo grep -i -r X509Anchors /Library/Preferences/*
The file was last changed in 2005 so on a hunch, I renamed it to com.apple.security-common.plist.bak, then logged out and back in. I renamed it in the Finder.
And VOILA, when I opened Keychain Access, the funny round boxes and duplicate copies of login.keychain were all gone from the list and I had no more entries in the Console about accessing obsolete keychain X509Anchors!
Now if I could just merge my old keychain (accountname.keychain) into my login.keychain, then all would be really good.
Just as an aside, when I upgraded to 10.5 from 10.4, my finder Sidebar under Places was messed up with duplicate entries and a Desktop icon that didn't work right. I also found that when I deleted ~/Library/Preferences/com.apple.sidebarlists.plist that the problems went away.

Console App Warning: accessing obsolete X509anchors.

I was trying to investigate a problem with SpamSieve when I looked in the Console App and found this warning associated with quite a few apps (mail, calendar, busysync, helpd, etc.)
There are no posts of recent vintage, and prior posts never concluded the cause of this error.
Should I be concerned?

No concern, you can safely ignore that message, it's not contributing to your problem.

Obsolete X509anchors? (Console message when apps launched)

Every time I launch an application this message is displayed in the system log (Console.app). Is this a problem that should be fixed? How?
Jul 19 10:15:29 Macintosh /Applications/Mail.app/Contents/MacOS/Mail[1563]: Warning: accessing obsolete X509Anchors.
--Thanks.

I'm unable to change the brightness of my display because of this problem, I believe. I wrote a bit more about it here:
http://nslog.com/2007/12/22/lostability_to_change_displaybrightness

Have obsolete X509anchors flooding Console - looking for ideas

My 2009 iMac (2Ghz Intel Core Duo with 4GB RAM) has been upgraded from Leopard to Snow Leopard (no clean install) I have noticed sporadic freezing and the only thing in the console shown is
/system/library/coreservices/systemUIserver.app/contents/macos/systemuiserver[11 0] Warning: accessing obsolete X509Anchors.
This mac also has installed Office 2004, 2008 and then cleaned to install Office 2011. Long time ago I had Entourage but removed it (cleared application support and preferences as well)
Just looking for avenues to go down to try to clear up this error.
Thanks
JTS

Hi,
Does anyone have a suggestion or a resource they could refer me to that talks about doing mass changes in Discoverer.You should note that oracle doesn't support those kind of changes and you should test it very carefully.
Is there a way to do a mass update which would append the words "Obsolete Report" to all discoverer reports?A way i can think of is to update the underlying table but as mentioned before you should be very careful with it since it is unsupported.
UPDATE EUL_US.EUL5_DOCUMENTS A
SET a.doc_name = a.doc_name||' Obsolete Report';
*few issues you should pay attention to:
1. concatenating the "Obsolete Report" might go over the limit of the workbook name.
2. you should check the behavior of links (if you use those).
3. perform real detailed tests !!!
Tamir

Obsolete X509Anchors warning.

Since installing Leopard, I have been getting frequent console messages on my MacBook Pro that various programs are "Accessing obsolete X509Anchors." I originally performed an upgrade install but have since performed a clean install with migration and am still having these warnings. I'm not seeing this on either my iMacG5 with Leopard or my wife's MacBook also running Leopard. Any ideas would be most appreciated.
Thanks,
Norm

Hi,
This one stumped me quite a while as I saw the same problem on my 10.5.x client. After some searching, I found that /Library/Preferences/com.apple.security-common.plist contained references to X509Anchors and X509Certificates. That was the only place I could figure that Keychain Access was finding them.
By the way, I found the references using Terminal as follows:
$ sudo grep -i -r X509Anchors /Library/Preferences/*
The file was last changed in 2005 so on a hunch, I renamed it to com.apple.security-common.plist.bak, then logged out and back in. I renamed it in the Finder.
And VOILA, when I opened Keychain Access, the funny round boxes and duplicate copies of login.keychain were all gone from the list and I had no more entries in the Console about accessing obsolete keychain X509Anchors!
Now if I could just merge my old keychain (accountname.keychain) into my login.keychain, then all would be really good.
Just as an aside, when I upgraded to 10.5 from 10.4, my finder Sidebar under Places was messed up with duplicate entries and a Desktop icon that didn't work right. I also found that when I deleted ~/Library/Preferences/com.apple.sidebarlists.plist that the problems went away.

What does "obsolete X509Anchors mean?

what does "obsolete X509Anchors mean? It is repeated many times under Calendar Agent in a "Warning" log.

Any help here? http://www.thexlab.com/faqs/x509anchors.html

HT1212 Hi, one of my daughters friends tried to access her ipod causing it to become disabled; i do not want her to lose all her photos, she accesses my itunes account which is on ICLOUD, will she lose all her data - can this be fixed?

Hi, one of my daughters friends tried to access her ipod causing it to become disabled; i do not want her to lose all her photos, she accesses my itunes account which is on ICLOUD, will she lose all her data - can this be fixed? I do not think it has been synced with a computer before.

Disabled
If you previously synced to the computer then you may be able to recover use of the iPod without erasing the iPod by following the instructions here:
Disabled Recovery-must use syncing computer.
Otherwise y will have to restore and thus erase the iPod
You can restore from backup
If not in backup then:
- If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer
- Maybe from the restored iPod via How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
http://www.amacsoft.com/ipod-data-recovery.html
-iPod touch Deleted Photo Recovery Tips You Should Know
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
If you previously synced to the computer then you may be able to recover use of the iPod without erasing the iPod by following the instructions here:
Disabled Recovery-must use syncing computer.

[svn:fx-trunk] 5008: Fix for mx.accessibility.AccImpl.as causing a java.io. FileNotFoundException exception in ASDoc

Revision: 5008
Author: [email protected]
Date: 2009-02-18 20:26:21 -0800 (Wed, 18 Feb 2009)
Log Message:
Fix for mx.accessibility.AccImpl.as causing a java.io.FileNotFoundException exception in ASDoc
QE Notes: None.
Doc Notes: None.
Bugs: SDK-19340
tests: checkintests, asdoc
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19340
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java

Welcome back everyone.
Hope you all had good holidays.
Cheers
glenn
tinylion development & design

I'm downloading iTunes onto a 64-bit Windows 7 platform. I am getting the message 'The Windows Installer Service could not be accessed'. What causes this?

I'm downloading iTunes onto a 64-bit Windows 7 platform. I am getting the message 'The Windows Installer Service could not be accessed'. What causes this?

You can go through the Microsoft Support kb as there can be some issue with the Windows Installer Service settings or registry keys. Go through the below Link and check the Resolution tab in it. But be careful when working with system Registries.
http://support.microsoft.com/kb/2642495

Access violation (0xC0000005) cause crash

Access violation (0xC0000005) cause crash. The crash report is as blow. It may be caused by the function IMAQ FillHole. How this function crash?
Who knows why? Thank you!
#Date: 2014年8月12日 14:21:51
#OSName: Windows 7 Ultimate
#OSVers: 6.1
#OSBuild: 7600
#AppName:
#Version: 12.0 32-bit
#AppKind: AppLib
#AppModDate: 08/12/2014 06:17 GMT
#LabVIEW Base Address: 0x30000000
<LVExec>
{"a":[
"vi": "D\\VISION_SYSTEM\\build\\MyProgram.exe\\IMAQ FillHole",
"ctx": "主应用程序实例",
"type": "subVI"
"vi": "D\\VISION_SYSTEM\\build\\MyProgram.exe\\ccd2表面2二值化.vi",
"ctx": "主应用程序实例",
"type": "subVI"
</LVExec>
<DEBUG_OUTPUT>
2014/8/12 16:48:15.894
Crash 0x0: Crash caught by NIER
File Unknown(0) : Crash 0x0: Crash caught by NIER
minidump id: 6e35643f-8ff2-49e6-bbde-98bac2ffa48a
ExceptionCode: 0xC0000005$N
</DEBUG_OUTPUT>
0x307277B4 - lvrt <unknown> + 0
0x30727B38 - lvrt <unknown> + 0
0x7C37FDB4 - MSVCR71 <unknown> + 0
0x77CA5A74 - ntdll <unknown> + 0
0x77C8B3C8 - ntdll <unknown> + 0
0x00000000 - <unknown> <unknown> + 0
Solved!
Go to Solution.
Attachments:
ccd2表面2二值化.vi ‏21 KB

Hi,
please stick with your original thread! Don't create double posts!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Repository access failed Root Cause: Password could not be retrieved

We have both infrastructure and application server installed on same unix box.
When I click on "OC4J_BI_Forms" link on EM page it throws below error. The status "unknown" icon.
Error
=====
An error was encountered while loading page. Failed to initialize configuration management user session.. Repository access failed Root Cause: Password could not be retrieved. Password could not be retrieved
Any help on this is highly appreciated.
Regards

We have both Apps & Infrastructure installed on the same HP Box. we have all components for both are running when I check them from unix prompt. On Infrastructure page shows all processes up.
On Middle Tier OC4J_BI_Forms or HTTP_Server or any OC4J components shows status unkown and other components Forms, BC4J, Forms, SSO shows up.
When I click on OC4J_BI_Forms or HTTP_Server or any OC4J components on mid tier I get the below error
Error
An error was encountered while loading page. Failed to initialize configuration management user session.. Repository access failed Root Cause: Password could not be retrieved. Password could not be retrieved
Any hint/help to resolve this issue is highly appreciated.
Regards
NTRao

Access Connection 5.02 stalled my Vista SP1 when its connection attempt fails

Access Connection 5.02 stalled my Vista SP1 when its connection attempt to some wireless network fails
And I some time has to kill explorer.exe to restore the response of my system
I'm using Vista SP1 on a X61 tablet
Thanks!

billbolton wrote:
For what its worth I have AC 5.02 running fine with Vista Ultimate x64 SP1 on both an an X61 and a T61 using an Intel 4965AGN card, as well as with Vista Ultimate x86 SP1 on a T60.
Cheers,
Bill
My T60 - 6371-CTO running Vista Home Premium X32 with SP1 using a wireless card "Thinkpad 11a/b/g WI_FI wireless LAN MINI PCIe US/EMEA/LA/ANZ" has many problems with AC 5.02 - disconnects when resuming from sleep or hibernate, fuzzy graphics, and sometimes a feeeze of the mouse that can be fixed by rebooting. This all started when System UPdate installed AC5.02 and PM 2.64 at the same time abpout a month ago. All problems went away when i went back to AC4.52 but kept the PM2.64 version. Your 4965 card may make the difference in being able to use AC5.02.
Pete
T60: 6371-CTO, VISTA Home Premium+SP1, 2GB....R51: 1836-Q4U,XP,1GB...600...755CD

CIFS mounts will cause stalls on shutdown

I've had this problem for awhile, but I've been brushing it under the rug. I have several mount points set up so that I can access several different webspaces locally. They are all set up so that they need to be manually mounted(I don't need them at every mount). I have some mount problems..but thats not my main issue..talk about them laer.. My main concern is that when I try to shut down my system, it stalls upon trying to unmount these filesystems. I am unable to umount them on my own..but not at shutdown. I think the problem lies in the area of the order of unmounting. I just ran across that idea, so I'll report back my findings tomorrow, but does anyone have any idea what would cause this kind of problem?
mike

I had this problem, for those googlers here is the solution, post this into your /etc/rc.local.shutdown file:
echo "Unmounting samba-cifs filesystems..."
MOUNTED_CIFS_DIRS=`mount -t cifs| cut -d\ -f3`
MOUNTED_DIRS_ARRAY=($MOUNTED_CIFS_DIRS)
for i in ${!MOUNTED_DIRS_ARRAY[@]}
do
umount -l ${MOUNTED_DIRS_ARRAY[i]}
done
so that it looks like this:
[jam@ikaros ~]$ cat /etc/rc.local.shutdown
#!/bin/bash
# /etc/rc.local.shutdown: Local shutdown script.
echo "Unmounting samba-cifs filesystems..."
MOUNTED_CIFS_DIRS=`mount -t cifs| cut -d\ -f3`
MOUNTED_DIRS_ARRAY=($MOUNTED_CIFS_DIRS)
for i in ${!MOUNTED_DIRS_ARRAY[@]}
do
umount -l ${MOUNTED_DIRS_ARRAY[i]}
done
[jam@ikaros ~]$
this will unmount the cifs mounts before the network goes down. Thanks.

Warning: accessing obsolete X509Anchors causing stall

Similar Messages

Maybe you are looking for