Warning after update to 10.10.3
When I rebooted after installing this latest update, a warning was given about an incompatible Rapport Preferences Pane (I believe but cannot remember the exact wording). I found the reference and deleted it. I have had problems with the Trusteer Rapport progam and had to do a complete reinstall of Yosemite with the help of an Apple technician.
I have now run an Etrecheck check and this was reported in the Launch Daemons: [failed] com.trusteer.rooks.rooksd.plist. I know items in red are just for info but I do not understand why it is listed. I cannot find the plist anywhere so does it matter?
This item also appeared in Etrecheck Startup items: ProTec6b: Path: /Library/StartupItems/ProTec6b Startup items are obsolete in OS X Yosemite
So should I delete this in the stated path or leave all well alone? Thanks in advance for any help/advice given.
Trusteer has caused crashes in the past. Not sure what its status is, now. I wouldn't install it.
If it was under Launch Daemons, it should be in /Library/LaunchDaemons. It could be in your User/Library, but that wouldn't be normal.
ProTec6b appears to be some form of copy protection scheme, likely installed with some photo plug-in. I would imagine those plug-ins no longer work unless you have upgraded them and it just left that crap behind.
Similar Messages
-
Warning after updates to 2.1 sdk
hi all,
i get this message on the console after i've updated to the new 2.1sdk, anyone has any clue what it's about? i've updated my itouch os, and my mac os to 10.5.4.
warning: UUID mismatch detected with the loaded library - on disk is:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS2.1.sdk/usr/lib/l iblockdown.dylib
=uuid-mismatch-with-loaded-file,file="/Developer/Platforms/iPhoneOS.platform/Dev eloper/SDKs/iPhoneOS2.1.sdk/usr/lib/liblockdown.dylib"
thanks!Well, I'm having similar problems but different enough that I thought I'd mention it. With enough adjustments to the build settings (for device) the game builds, begins to run, I get the error mentioned above, then the game quits after a frame or so with this message
"Debugger stopped.
Program exited with status value:101.
<update> - Originally the app would only crash when running from XCode, but when I ran the app on the device on it's own it appeared to run fine. The last few builds have not worked at all, so basically my device is useless. Has there been an update on this?
Mike
Message was edited by: MoProductions -
After updating to iOS 6 my iPod Touch 4th.Gen is virtually unusable ... does anyone know how to sue Apple since they gave no warning about iOS 6 being for iPad optimisation and a killer for iPods ? Before I throw away my iPod Touch does anyone know if Apple intends to rectify their obnoxious disregard for iPod users by issuing another 'upgrade' which will allow iPods to work without the constant system crashes that iOS 6 has caused ?
Contact a lawyer if you want to sue.
Otherwise try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
After updating my software from snow leapord to mountain lion my MacBook Pro suddenly keeps shutting down without any reason no warning suddenly just restarts... Can someone hel
Note the date and time the problem occurred, then go to Applications/Utilities/Console and copy the log starting at the time of the crash. Paste the log in a reply. Please do not use a screen shot as they can be hard to read. If there are repeated runs of the same messages, please post only one run. Be selective about what you post and don’t post huge amounts. Make sure there is no personal data visible. Information learned from Linc Davis.
-
Parental Controls Broken After Updating an Application
I'm using Parental Controls (remotely) under 10.5.4 to manage what applications can be opened in a small lab. This works well until I need to update an application on the lab computers. I'll use Firefox as an example, but this happens with all applications.
- I have a version of Firefox on all lab computers (3.0) and Firefox is allowed under parental controls. Everything works.
- I update Firefox to 3.0.1. (In this case, I simply overwrote the older version of firefox, but I get this problem when updating applications with installers.)
- If I remotely look at the Parental Controls settings for the lab computer, I can see that Firefox is still allowed (checked)
- Now, on the lab computer, I log into the managed account and try to open Firefox, I get a warning about the application not being on the allowed list.
- I log out of the lab computer, and again, access the parental controls setting remotely. Now Firefox is Not Allowed (unchecked).
- I check the box to allow Firefox
- Now when I log into the managed account, the new version of Firefox opens.
Some fixex / workarounds I have tried:
- After updating Firefox, I remotely accessed the parental controls settings and first disallowed (unchecked) Firefox, close parental controls, reopened it, and then allowed (checked) Firefox. When logged into the managed account, opening Firefox produced the not allowed error. When I return to the Parental Controls settings, Firefox is now Not Allowed (unchecked). Checking the box to allow Firefox fix the error.
- I've tried restarting after updating Firefox and it did not work.
My guess:
I assume that Leopard keeps a list of applications and versions installed on the computer. Parental Controls allows a specific combination and any update will break the parental controls. To allow this updated application to be opened, its old entry in the list must be updated to reflect the new version. The only way I have figured out how to do this, is to try and open the updated application and fail. Then I can finally allow the updated version.
Does anyone know of an automated or scritable way to do this. I have tried working with lsregister, but have not had any success. I need a way to force Leopard to reload / refresh its list of installed applications, with having a user logged into the console.
For a different solution, does if you can send a UNIX command to machine sitting on it login screen, that will cause the machine to login as a local console user. I could then send "open /path/to/updated app" and a logout to force the application list to be refreshed.
Many Thanks in advance for any help.Hi! Did you ever receive any feedback on this issue?
I am interested since I have noticed the exact same frustration with Parental Controls since updating to 10.5.
While a very good idea, I think the parental controls, especially with respect to permissions about applications is utterly useless at the moment. It is completely stupid that I have to reset the permissions for applications each and every time I update an application. I have three children who use the computer and I don't want them using every bit of software on the eMac. They are naturally curious and will click on programs that can do damage without realizing is.
I have also turned off any parental controls regarding web browsing but my children still hit many sites that are blocked by Parental Controls. I do have a linux gateway that does the filtering quicker and better.
If anyone at Apple is listening ... please spend some time to fix this for the next update.
Thank you. -
after update to IOS 6 on my Ipad2 it not possible to go to month view of March 2013 in the calendar app?
on my Ipone with IOS there is no problem
is Apple aware of this problem?
When will it be solved?Packrat74 wrote:
Probably the app developers fault but then Apple needs to warn people about compatiblity of apps... I will add a review note to TOP 3 to warn people
If it is an app compatibility issue - it IS the app developers responsibility to make sure that they update their apps in order to work with the new iOS. Apple owes no users a warning whatsoever. Common sense tells me that a very old app that has not been updated for the last two iOS updates just might not make the grade in the third iOS release since the app came out.
I can't even find an App called Top 3 Solitaire in the U.S. App Store. Perhaps the app was so old and it hasn't been updated in so long so it was pulled from the App Store. -
ITunes won't open after update; MacBook Pro, Mac OSX 10.6.8, iTunes version 11.1.5
iTunes won't open after update - help, please; MacBook Pro, Mac OSX 10.6.8, iTunes version 11.1.5.
i had a problem similar to yours and better yet, i have the fix for it. i downloaded maverick 4 months ago and was without itunes ever since. all itunes icon did was bounce. itunes would never open and whats more, is when i would try to update it, i would get a "thank you for downloading itunes!" page , but the download would never work. so i scoured the net for solves. nothing that worked. <4 months later> then last night i took a new approach. i decided even though maverick would not allow me to uninstall itunes, i would find a way to uninstall itunes. then i would reinstall back to 11.1.5 i was successful and heres what i did.
step one-
Back up your iTunes Library.itl file, found under ~/Music/iTunes
(even tho i didnt, i only had 3 artists in there at the time. and they didnt get erased but i advise you back up just in case.)
step two-
download itunes 10.7 from apple. i used this link Download it from Apple here
(i pulled the link from Aarons website (awesometast.com). you download 10.7 however you want but i used the link above and have had no issues).
although im not sure you need to do this step ( you may be able to download 11.1.5 itunes without 10.7, i did because i was following intructions from http://awesometoast.com/downgrading-to-itunes-10-7-from-itunes-11-on-osx/
step 3-
open Terminal
step 4-
enter in these 3 commands hitting return after each line. 1st line nothing seems to happen, 2nd line nothing seems to happen and 3rd line gives you a warning and requires password to continue. when i did it, my password didnt appear as i entered it and i hit return without looking, so i entered it in again, although im not sure i had to the 2nd time.
killall iTunes
killall "iTunes Helper"
sudo rm -rf /Applications/iTunes.app/
step 5-
drag off and dump the itunes icon (which now has the ? shadow in it) off your dock.
step 6-
install 10.7 itunes you downloaded earlier. (not sure if this part is neccesary. you may be able to just download 11.1.5 but i downloaded 10.7 because i was following Aarons steps.) itunes now works.
step 7-
go to apple and update to 11.1.5 itunes. install it. open it and you have itunes 11.1.5 in perfect working order. assuming you have a decent internet speed for the downloads, the whole process takes very little time.
with those steps above, you can solve itunes just bouncing and not launching issues and also the "thank you for downloading" and nothing downloads issue. enjoy. also i would like to give a shout out to http://awesometoast.com and thank Aaron for the knowledge that enabled me to get itunes back into my life. -
Multiseat with Lightdm broken after updating Mesa
Hi,
I've been using a multiseat configuration for months now, and it was working almost perfectly (almost - multiseating is far from being really stable yet IMHO, but anyway).
I updated mesa-libgl a few days ago and confirmed packages replacement, but right after rebooting my second seat didn't work anymore. The display stays black and no login screen shows up, although I suppose a signal is still sent as the monitor doesn't go into sleep mode. The first seat on the other side is working as usual, no difference noted.
In the processes, I can only see one Xorg instance (used by the first seat), when I'm supposed to have tow instances, one for each seat and with different parameters. It's like the second seat is crashing, but I can see no trace of such crash in the logs (kernel.log or everything.log). Even the Xorg.1.log contains all the informations as if the display was running fine.
The day after updating Mesa, I also updated Lightdm but it didn't change anything (I had a brief hope for a moment).
My configuration is the following :
- Nvidia GTX 760: used on seat0 as dual-head with Nouveau driver (Layout-Main in Xorg)
- Intel GMA: used on seat1 on single-head with Intel driver (Layout-Aux in Xorg)
I'm using Lightdm with this configuration:
[LightDM]
minimum-vt=1
run-directory=/run/lightdm
[SeatDefaults]
greeter-session=lightdm-gtk-greeter
greeter-show-manual-login=true
session-wrapper=/etc/lightdm/Xsession
greeter-setup-script=/usr/bin/numlockx on
[Seat:0]
xserver-command=/usr/bin/X :0 -sharevts
xserver-layout=Layout-Main
[Seat:1]
xserver-command=/usr/bin/X :1 -sharevts -novtswitch
xserver-layout=Layout-Aux
The Xorg configuration for the seats is divided into two files:
/etc/X11/xorg.conf.d/50-serverlayout-main.conf
Section "ServerLayout"
Identifier "Layout-Main"
Screen "Screen-Main" 0 0
InputDevice "Logitech-Illuminated" "CoreKeyboard"
InputDevice "Logitech-G100S" "CorePointer"
Option "AllowEmptyInput" "true"
EndSection
Section "InputDevice"
Identifier "Logitech-G100S"
Driver "evdev"
Option "Protocol" "auto"
Option "Device" "/dev/input/by-id/usb-Logitech_G100s_Optical_Gaming_Mouse-event-mouse"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
Option "GrabDevice" "on" # prevent send event to other X-servers
EndSection
Section "InputDevice"
Identifier "Logitech-Illuminated"
Driver "evdev"
Option "XkbLayout" "fr"
Option "XkbModel" "pc104"
Option "Device" "/dev/input/by-id/usb-Logitech_Logitech_Illuminated_Keyboard-event-kbd"
Option "GrabDevice" "on" # prevent send event to other X-servers
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Samsung"
ModelName "Samsung SyncMaster 2433"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 60.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Samsung"
ModelName "Samsung SyncMaster 2333sw"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "NVIDIA-GTX760"
Driver "nouveau"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 760"
EndSection
Section "Screen"
Identifier "Screen-Main"
Device "NVIDIA-GTX760"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
/etc/X11/xorg.conf.d/51-serverlayout-aux.conf
Section "ServerLayout"
Identifier "Layout-Aux"
Screen "Screen-Aux" 0 0
InputDevice "K400r-keyboard" "CoreKeyboard"
InputDevice "K400r-keyboard-multimedia" "SendCoreEvents"
InputDevice "K400r-mouse" "CorePointer"
Option "AllowEmptyInput" "true"
EndSection
Section "InputDevice"
Identifier "K400r-mouse"
Driver "evdev"
Option "Protocol" "auto"
Option "Device" "/dev/input/by-id/usb-Logitech_USB_Receiver-if02-mouse"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
Option "GrabDevice" "on" # prevent send event to other X-servers
EndSection
Section "InputDevice"
Identifier "K400r-keyboard"
Driver "evdev"
Option "XkbLayout" "fr"
Option "XkbModel" "pc104"
Option "Device" "/dev/input/by-id/usb-Logitech_USB_Receiver-if02-event-mouse"
Option "GrabDevice" "on" # prevent send event to other X-servers
EndSection
Section "InputDevice"
Identifier "K400r-keyboard-multimedia"
Driver "evdev"
Option "Device" "/dev/input/by-id/usb-Logitech_USB_Receiver-if02-event-mouse"
Option "XkbModel" "evdev"
Option "GrabDevice" "on"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Compaq"
ModelName "Compaq Q2159"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Intel-I915"
Driver "intel"
VendorName "Intel"
BoardName "Intel IGP"
BusID "PCI:0:2:0"
# Option "NoAccel" "True"
# Option "DRI" "False"
# Option "TearFree" "true"
# Option "AccelMethod" "sna"
EndSection
Section "Screen"
Identifier "Screen-Aux"
Device "Intel-I915"
Monitor "Monitor1"
DefaultDepth 24
EndSection
When I disable the primary seat configuration in Xorg files (I just prevent the file from being loaded), and after I restart Lightm via
# systemctl restart lightdm
the display shows up correctly on the secondary seat (and not on the primary, which is logical so far). So in the end it seems I just cannot have both seat running at the same time, but individually they work fine.
My logical assumption is that the recent upgrade of the Mesa packages somehow broke this configuration, but I cannot find why and how.
FYI, here's what I tried:
- play with Intel drivers options in Xorg (NoAccel, DRI, ...)
- play with Xorg options on the command line of each seat (-sharevts, -novtswitch)
- switch to Nvidia proprietary drivers (but here also, only the primary seat works, but that may be for a totally different reason, which is why I used Nouveau ever since I set up this configuration)
Here are the Xorg log files:
Xorg.0.log
X.Org X Server 1.16.1
Release Date: 2014-09-21
[ 6.853] X Protocol Version 11, Revision 0
[ 6.853] Build Operating System: Linux 3.16.1-1-ARCH x86_64
[ 6.853] Current Operating System: Linux leto 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
[ 6.854] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=83e16b30-5b35-4b15-9bce-5ec87c00d46d rw quiet
[ 6.854] Build Date: 21 September 2014 10:53:13AM
[ 6.854]
[ 6.854] Current version of pixman: 0.32.6
[ 6.854] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 6.854] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6.854] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 3 23:21:15 2014
[ 6.855] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 6.855] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 6.857] (==) ServerLayout "Layout-Main"
[ 6.857] (**) |-->Screen "Screen-Main" (0)
[ 6.857] (**) | |-->Monitor "Monitor0"
[ 6.857] (**) | |-->Device "NVIDIA-GTX760"
[ 6.857] (**) |-->Input Device "Logitech-Illuminated"
[ 6.857] (**) |-->Input Device "Logitech-G100S"
[ 6.857] (==) Automatically adding devices
[ 6.857] (==) Automatically enabling devices
[ 6.857] (==) Automatically adding GPU devices
[ 6.858] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 6.858] Entry deleted from font path.
[ 6.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 6.860] Entry deleted from font path.
[ 6.860] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 6.860] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 6.860] Entry deleted from font path.
[ 6.860] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 6.860] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 6.860] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 6.860] (II) Loader magic: 0x818d80
[ 6.860] (II) Module ABI versions:
[ 6.860] X.Org ANSI C Emulation: 0.4
[ 6.860] X.Org Video Driver: 18.0
[ 6.860] X.Org XInput driver : 21.0
[ 6.860] X.Org Server Extension : 8.0
[ 6.861] (EE) systemd-logind: failed to get session: PID 656 does not belong to any known session
[ 6.861] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 6.861] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 6.862] (--) PCI: (0:0:2:0) 8086:0412:1458:d000 rev 6, Mem @ 0xdb400000/4194304, 0xc0000000/268435456, I/O @ 0x0000f000/64
[ 6.862] (--) PCI:*(0:1:0:0) 10de:1187:1462:2848 rev 161, Mem @ 0xda000000/16777216, 0xd0000000/134217728, 0xd8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 6.862] (II) Open ACPI successful (/var/run/acpid.socket)
[ 6.862] (II) LoadModule: "glx"
[ 6.863] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6.873] (II) Module glx: vendor="X.Org Foundation"
[ 6.873] compiled for 1.16.1, module version = 1.0.0
[ 6.873] ABI class: X.Org Server Extension, version 8.0
[ 6.873] (==) AIGLX enabled
[ 6.873] (II) LoadModule: "nouveau"
[ 6.874] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 6.875] (II) Module nouveau: vendor="X.Org Foundation"
[ 6.875] compiled for 1.16.1, module version = 1.0.11
[ 6.875] Module class: X.Org Video Driver
[ 6.875] ABI class: X.Org Video Driver, version 18.0
[ 6.875] (II) LoadModule: "evdev"
[ 6.875] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6.877] (II) Module evdev: vendor="X.Org Foundation"
[ 6.877] compiled for 1.16.0, module version = 2.9.0
[ 6.877] Module class: X.Org XInput Driver
[ 6.877] ABI class: X.Org XInput driver, version 21.0
[ 6.877] (II) NOUVEAU driver
[ 6.877] (II) NOUVEAU driver for NVIDIA chipset families :
[ 6.877] RIVA TNT (NV04)
[ 6.877] RIVA TNT2 (NV05)
[ 6.877] GeForce 256 (NV10)
[ 6.877] GeForce 2 (NV11, NV15)
[ 6.877] GeForce 4MX (NV17, NV18)
[ 6.877] GeForce 3 (NV20)
[ 6.877] GeForce 4Ti (NV25, NV28)
[ 6.878] GeForce FX (NV3x)
[ 6.878] GeForce 6 (NV4x)
[ 6.878] GeForce 7 (G7x)
[ 6.878] GeForce 8 (G8x)
[ 6.878] GeForce GTX 200 (NVA0)
[ 6.878] GeForce GTX 400 (NVC0)
[ 6.878] (++) using VT number 1
[ 6.878] (II) [drm] nouveau interface version: 1.1.2
[ 6.878] (II) Loading sub module "dri2"
[ 6.878] (II) LoadModule: "dri2"
[ 6.878] (II) Module "dri2" already built-in
[ 6.878] (--) NOUVEAU(0): Chipset: "NVIDIA NVE4"
[ 6.878] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 6.878] (==) NOUVEAU(0): RGB weight 888
[ 6.878] (==) NOUVEAU(0): Default visual is TrueColor
[ 6.878] (==) NOUVEAU(0): Using HW cursor
[ 6.878] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[ 6.878] (==) NOUVEAU(0): Page flipping enabled
[ 6.878] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[ 6.878] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[ 6.878] (II) NOUVEAU(0): Initializing outputs ...
[ 6.935] (II) NOUVEAU(0): Output DVI-I-1 using monitor section Monitor0
[ 6.965] (II) NOUVEAU(0): Output DVI-D-1 has no monitor section
[ 6.967] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 7.073] (II) NOUVEAU(0): Output DP-1 has no monitor section
[ 7.073] (II) NOUVEAU(0): 4 crtcs needed for screen.
[ 7.076] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[ 7.076] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[ 7.076] (II) NOUVEAU(0): Allocated crtc nr. 2 to this screen.
[ 7.076] (II) NOUVEAU(0): Allocated crtc nr. 3 to this screen.
[ 7.134] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 7.134] (II) NOUVEAU(0): Manufacturer: SAM Model: 5c8 Serial#: 1129132596
[ 7.134] (II) NOUVEAU(0): Year: 2009 Week: 46
[ 7.134] (II) NOUVEAU(0): EDID Version: 1.3
[ 7.134] (II) NOUVEAU(0): Digital Display Input
[ 7.134] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 52 vert.: 29
[ 7.134] (II) NOUVEAU(0): Gamma: 2.20
[ 7.134] (II) NOUVEAU(0): DPMS capabilities: Off
[ 7.134] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 7.134] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 7.134] (II) NOUVEAU(0): redX: 0.647 redY: 0.334 greenX: 0.284 greenY: 0.607
[ 7.134] (II) NOUVEAU(0): blueX: 0.151 blueY: 0.071 whiteX: 0.312 whiteY: 0.329
[ 7.134] (II) NOUVEAU(0): Supported established timings:
[ 7.134] (II) NOUVEAU(0): 640x480@60Hz
[ 7.134] (II) NOUVEAU(0): 800x600@56Hz
[ 7.134] (II) NOUVEAU(0): 800x600@60Hz
[ 7.134] (II) NOUVEAU(0): 1024x768@60Hz
[ 7.134] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 7.134] (II) NOUVEAU(0): Supported standard timings:
[ 7.134] (II) NOUVEAU(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 7.134] (II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 7.134] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 7.134] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 7.134] (II) NOUVEAU(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 7.134] (II) NOUVEAU(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 7.134] (II) NOUVEAU(0): Supported detailed timing:
[ 7.134] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 521 x 293 mm
[ 7.134] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 7.134] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 7.134] (II) NOUVEAU(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 7.134] (II) NOUVEAU(0): Monitor name: SyncMaster
[ 7.134] (II) NOUVEAU(0): Serial No: H9XSB06266
[ 7.134] (II) NOUVEAU(0): Supported detailed timing:
[ 7.134] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 521 x 293 mm
[ 7.134] (II) NOUVEAU(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 7.134] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 7.134] (II) NOUVEAU(0): Supported detailed timing:
[ 7.134] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 521 x 293 mm
[ 7.134] (II) NOUVEAU(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 7.134] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 7.134] (II) NOUVEAU(0): Supported detailed timing:
[ 7.134] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 521 x 293 mm
[ 7.134] (II) NOUVEAU(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 7.134] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 7.134] (II) NOUVEAU(0): Supported detailed timing:
[ 7.134] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 521 x 293 mm
[ 7.134] (II) NOUVEAU(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 7.134] (II) NOUVEAU(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 7.134] (II) NOUVEAU(0): Supported detailed timing:
[ 7.134] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 521 x 293 mm
[ 7.134] (II) NOUVEAU(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 7.134] (II) NOUVEAU(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 7.134] (II) NOUVEAU(0): Number of EDID sections to follow: 1
[ 7.134] (II) NOUVEAU(0): EDID (in hex):
[ 7.134] (II) NOUVEAU(0): 00ffffffffffff004c2dc80534324d43
[ 7.134] (II) NOUVEAU(0): 2e13010380341d782aeed1a555489b26
[ 7.134] (II) NOUVEAU(0): 1250542308008100814081809500a940
[ 7.134] (II) NOUVEAU(0): b30001010101023a801871382d40582c
[ 7.134] (II) NOUVEAU(0): 450009252100001e000000fd00383c1e
[ 7.134] (II) NOUVEAU(0): 5111000a202020202020000000fc0053
[ 7.134] (II) NOUVEAU(0): 796e634d61737465720a2020000000ff
[ 7.134] (II) NOUVEAU(0): 00483958534230363236360a20200111
[ 7.134] (II) NOUVEAU(0): 02010400023a80d072382d40102c4580
[ 7.134] (II) NOUVEAU(0): 09252100001e011d007251d01e206e28
[ 7.134] (II) NOUVEAU(0): 550009252100001e011d00bc52d01e20
[ 7.134] (II) NOUVEAU(0): b828554009252100001e8c0ad0902040
[ 7.134] (II) NOUVEAU(0): 31200c4055000925210000188c0ad08a
[ 7.134] (II) NOUVEAU(0): 20e02d10103e96000925210000180000
[ 7.134] (II) NOUVEAU(0): 00000000000000000000000000000000
[ 7.134] (II) NOUVEAU(0): 0000000000000000000000000000005e
[ 7.134] (II) NOUVEAU(0): Not using mode "1920x1080" (vrefresh out of range)
[ 7.134] (II) NOUVEAU(0): Not using mode "1280x720" (vrefresh out of range)
[ 7.134] (II) NOUVEAU(0): Not using mode "720x576" (vrefresh out of range)
[ 7.134] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 7.134] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 7.134] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.164] (II) NOUVEAU(0): EDID for output DVI-D-1
[ 7.164] (II) NOUVEAU(0): Manufacturer: SAM Model: 4de Serial#: 1129132595
[ 7.164] (II) NOUVEAU(0): Year: 2009 Week: 6
[ 7.164] (II) NOUVEAU(0): EDID Version: 1.3
[ 7.164] (II) NOUVEAU(0): Digital Display Input
[ 7.164] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 7.164] (II) NOUVEAU(0): Gamma: 2.20
[ 7.164] (II) NOUVEAU(0): DPMS capabilities: Off
[ 7.164] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 7.164] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 7.164] (II) NOUVEAU(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 7.164] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 7.164] (II) NOUVEAU(0): Supported established timings:
[ 7.164] (II) NOUVEAU(0): 640x480@60Hz
[ 7.164] (II) NOUVEAU(0): 800x600@56Hz
[ 7.164] (II) NOUVEAU(0): 800x600@60Hz
[ 7.164] (II) NOUVEAU(0): 1024x768@60Hz
[ 7.164] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 7.164] (II) NOUVEAU(0): Supported standard timings:
[ 7.164] (II) NOUVEAU(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 7.164] (II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 7.164] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 7.164] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 7.164] (II) NOUVEAU(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 7.164] (II) NOUVEAU(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 7.164] (II) NOUVEAU(0): Supported detailed timing:
[ 7.164] (II) NOUVEAU(0): clock: 138.5 MHz Image Size: 477 x 268 mm
[ 7.164] (II) NOUVEAU(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 7.164] (II) NOUVEAU(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 7.164] (II) NOUVEAU(0): Ranges: V min: 56 V max: 61 Hz, H min: 30 H max: 75 kHz, PixClock max 175 MHz
[ 7.164] (II) NOUVEAU(0): Monitor name: SyncMaster
[ 7.164] (II) NOUVEAU(0): Serial No: H9XS201897
[ 7.164] (II) NOUVEAU(0): EDID (in hex):
[ 7.164] (II) NOUVEAU(0): 00ffffffffffff004c2dde0433324d43
[ 7.164] (II) NOUVEAU(0): 0613010380331d782aee91a3544c9926
[ 7.164] (II) NOUVEAU(0): 0f50542308008100814081809500b300
[ 7.164] (II) NOUVEAU(0): a940010101011a3680a070381f403020
[ 7.164] (II) NOUVEAU(0): 3500dd0c1100001a000000fd00383d1e
[ 7.164] (II) NOUVEAU(0): 4b11000a202020202020000000fc0053
[ 7.164] (II) NOUVEAU(0): 796e634d61737465720a2020000000ff
[ 7.164] (II) NOUVEAU(0): 00483958533230313839370a2020008b
[ 7.164] (II) NOUVEAU(0): Printing probed modes for output DVI-D-1
[ 7.164] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 7.164] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.166] (II) NOUVEAU(0): EDID for output HDMI-1
[ 7.270] (II) NOUVEAU(0): EDID for output DP-1
[ 7.270] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 7.270] (II) NOUVEAU(0): Output DVI-D-1 connected
[ 7.270] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 7.270] (II) NOUVEAU(0): Output DP-1 disconnected
[ 7.270] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 7.270] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
[ 7.270] (II) NOUVEAU(0): Output DVI-D-1 using initial mode 1920x1080
[ 7.270] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 7.270] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[ 7.270] (**) NOUVEAU(0): Driver mode "1920x1080": 138.5 MHz (scaled from 0.0 MHz), 66.6 kHz, 59.9 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 7.270] (**) NOUVEAU(0): Driver mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "1280x800": 71.0 MHz (scaled from 0.0 MHz), 49.3 kHz, 59.9 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.270] (==) NOUVEAU(0): DPI set to (96, 96)
[ 7.270] (II) Loading sub module "fb"
[ 7.270] (II) LoadModule: "fb"
[ 7.270] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 7.272] (II) Module fb: vendor="X.Org Foundation"
[ 7.272] compiled for 1.16.1, module version = 1.0.0
[ 7.272] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.272] (II) Loading sub module "shadowfb"
[ 7.272] (II) LoadModule: "shadowfb"
[ 7.272] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 7.272] (II) Module shadowfb: vendor="X.Org Foundation"
[ 7.272] compiled for 1.16.1, module version = 1.0.0
[ 7.272] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.272] (--) Depth 24 pixmap format is 32 bpp
[ 7.278] (II) NOUVEAU(0): Channel setup complete.
[ 7.279] (II) NOUVEAU(0): [COPY] async initialised.
[ 7.280] (II) NOUVEAU(0): [DRI2] Setup complete
[ 7.280] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 7.280] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 7.281] (II) Loading sub module "exa"
[ 7.281] (II) LoadModule: "exa"
[ 7.281] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 7.281] (II) Module exa: vendor="X.Org Foundation"
[ 7.281] compiled for 1.16.1, module version = 2.6.0
[ 7.281] ABI class: X.Org Video Driver, version 18.0
[ 7.281] (II) EXA(0): Driver allocated offscreen pixmaps
[ 7.281] (II) EXA(0): Driver registered support for the following operations:
[ 7.281] (II) Solid
[ 7.281] (II) Copy
[ 7.281] (II) Composite (RENDER acceleration)
[ 7.281] (II) UploadToScreen
[ 7.281] (II) DownloadFromScreen
[ 7.281] (==) NOUVEAU(0): Backing store enabled
[ 7.281] (==) NOUVEAU(0): Silken mouse enabled
[ 7.282] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 7.282] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 7.282] (**) NOUVEAU(0): DPMS enabled
[ 7.282] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 7.282] (--) RandR disabled
[ 7.363] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 7.363] (II) AIGLX: enabled GLX_ARB_create_context
[ 7.363] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 7.363] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 7.363] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 7.363] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 7.363] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 7.363] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 7.363] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 7.363] (II) AIGLX: Loaded and initialized nouveau
[ 7.363] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 7.365] (II) NOUVEAU(0): NVEnterVT is called.
[ 7.420] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
[ 7.420] resize called 1920 1080
[ 7.445] (II) Using input driver 'evdev' for 'Logitech-Illuminated'
[ 7.445] (**) Option "CoreKeyboard"
[ 7.445] (**) Logitech-Illuminated: always reports core events
[ 7.445] (**) evdev: Logitech-Illuminated: Device: "/dev/input/by-id/usb-Logitech_Logitech_Illuminated_Keyboard-event-kbd"
[ 7.503] (--) evdev: Logitech-Illuminated: Vendor 0x46d Product 0xc318
[ 7.503] (--) evdev: Logitech-Illuminated: Found keys
[ 7.503] (II) evdev: Logitech-Illuminated: Configuring as keyboard
[ 7.503] (II) XINPUT: Adding extended input device "Logitech-Illuminated" (type: KEYBOARD, id 6)
[ 7.503] (**) Option "xkb_rules" "evdev"
[ 7.503] (**) Option "xkb_model" "pc104"
[ 7.503] (**) Option "xkb_layout" "fr"
[ 7.513] (II) Using input driver 'evdev' for 'Logitech-G100S'
[ 7.513] (**) Option "CorePointer"
[ 7.513] (**) Logitech-G100S: always reports core events
[ 7.513] (**) evdev: Logitech-G100S: Device: "/dev/input/by-id/usb-Logitech_G100s_Optical_Gaming_Mouse-event-mouse"
[ 7.583] (--) evdev: Logitech-G100S: Vendor 0x46d Product 0xc247
[ 7.583] (--) evdev: Logitech-G100S: Found 12 mouse buttons
[ 7.583] (--) evdev: Logitech-G100S: Found scroll wheel(s)
[ 7.583] (--) evdev: Logitech-G100S: Found relative axes
[ 7.583] (--) evdev: Logitech-G100S: Found x and y relative axes
[ 7.583] (II) evdev: Logitech-G100S: Configuring as mouse
[ 7.583] (II) evdev: Logitech-G100S: Adding scrollwheel support
[ 7.583] (**) Option "Emulate3Buttons" "no"
[ 7.583] (**) evdev: Logitech-G100S: YAxisMapping: buttons 4 and 5
[ 7.583] (**) evdev: Logitech-G100S: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.583] (II) XINPUT: Adding extended input device "Logitech-G100S" (type: MOUSE, id 7)
[ 7.583] (II) evdev: Logitech-G100S: initialized for relative axes.
[ 7.583] (**) Logitech-G100S: (accel) keeping acceleration scheme 1
[ 7.583] (**) Logitech-G100S: (accel) acceleration profile 0
[ 7.583] (**) Logitech-G100S: (accel) acceleration factor: 2.000
[ 7.583] (**) Logitech-G100S: (accel) acceleration threshold: 4
[ 7.584] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 7.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.584] (**) Power Button: Applying InputClass "system-keyboard"
[ 7.584] (II) Using input driver 'evdev' for 'Power Button'
[ 7.584] (**) Power Button: always reports core events
[ 7.584] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 7.584] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.584] (--) evdev: Power Button: Found keys
[ 7.584] (II) evdev: Power Button: Configuring as keyboard
[ 7.584] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
[ 7.584] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 7.584] (**) Option "xkb_rules" "evdev"
[ 7.584] (**) Option "xkb_model" "pc104"
[ 7.584] (**) Option "xkb_layout" "fr"
[ 7.584] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 7.584] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.584] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.584] (**) Video Bus: Applying InputClass "system-keyboard"
[ 7.584] (II) Using input driver 'evdev' for 'Video Bus'
[ 7.584] (**) Video Bus: always reports core events
[ 7.584] (**) evdev: Video Bus: Device: "/dev/input/event11"
[ 7.584] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 7.584] (--) evdev: Video Bus: Found keys
[ 7.584] (II) evdev: Video Bus: Configuring as keyboard
[ 7.584] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14/event11"
[ 7.584] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[ 7.584] (**) Option "xkb_rules" "evdev"
[ 7.584] (**) Option "xkb_model" "pc104"
[ 7.584] (**) Option "xkb_layout" "fr"
[ 7.584] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 7.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.584] (**) Power Button: Applying InputClass "system-keyboard"
[ 7.584] (II) Using input driver 'evdev' for 'Power Button'
[ 7.584] (**) Power Button: always reports core events
[ 7.584] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 7.584] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.584] (--) evdev: Power Button: Found keys
[ 7.584] (II) evdev: Power Button: Configuring as keyboard
[ 7.584] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event0"
[ 7.584] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10)
[ 7.584] (**) Option "xkb_rules" "evdev"
[ 7.584] (**) Option "xkb_model" "pc104"
[ 7.584] (**) Option "xkb_layout" "fr"
[ 7.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event17)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event18)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event12)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event13)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event14)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/event23)
[ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev pointer catchall"
[ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev keyboard catchall"
[ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev pointer catchall"
[ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev keyboard catchall"
[ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "system-keyboard"
[ 7.585] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4024'
[ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: always reports core events
[ 7.585] (**) evdev: Logitech Unifying Device. Wireless PID:4024: Device: "/dev/input/event23"
[ 7.585] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Vendor 0x46d Product 0xc52b
[ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found 20 mouse buttons
[ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found scroll wheel(s)
[ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found relative axes
[ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found x and y relative axes
[ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found absolute axes
[ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Forcing absolute x/y axes to exist.
[ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found keys
[ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Configuring as mouse
[ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Configuring as keyboard
[ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Adding scrollwheel support
[ 7.586] (**) evdev: Logitech Unifying Device. Wireless PID:4024: YAxisMapping: buttons 4 and 5
[ 7.586] (**) evdev: Logitech Unifying Device. Wireless PID:4024: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.586] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.1/1-11.1:1.2/0003:046D:C52B.0006/0003:046D:C52B.0008/input/input26/event23"
[ 7.586] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4024" (type: KEYBOARD, id 11)
[ 7.586] (**) Option "xkb_rules" "evdev"
[ 7.586] (**) Option "xkb_model" "pc104"
[ 7.586] (**) Option "xkb_layout" "fr"
[ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: initialized for relative axes.
[ 7.586] (WW) evdev: Logitech Unifying Device. Wireless PID:4024: ignoring absolute axes.
[ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: (accel) keeping acceleration scheme 1
[ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: (accel) acceleration profile 0
[ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: (accel) acceleration factor: 2.000
[ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: (accel) acceleration threshold: 4
[ 7.586] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/mouse1)
[ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "system-keyboard"
[ 7.586] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4024'
[ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: always reports core events
[ 7.586] (**) evdev: Logitech Unifying Device. Wireless PID:4024: Device: "/dev/input/mouse1"
[ 7.586] (EE) evdev: Logitech Unifying Device. Wireless PID:4024: Unable to query fd: Inappropriate ioctl for device
[ 7.630] (EE) PreInit returned 2 for "Logitech Unifying Device. Wireless PID:4024"
[ 7.630] (II) UnloadModule: "evdev"
[ 7.630] (II) config/udev: Adding input device HD Webcam C525 (/dev/input/event25)
[ 7.630] (**) HD Webcam C525: Applying InputClass "evdev keyboard catchall"
[ 7.630] (**) HD Webcam C525: Applying InputClass "evdev keyboard catchall"
[ 7.630] (**) HD Webcam C525: Applying InputClass "system-keyboard"
[ 7.630] (II) Using input driver 'evdev' for 'HD Webcam C525'
[ 7.630] (**) HD Webcam C525: always reports core events
[ 7.630] (**) evdev: HD Webcam C525: Device: "/dev/input/event25"
[ 7.630] (--) evdev: HD Webcam C525: Vendor 0x46d Product 0x826
[ 7.630] (--) evdev: HD Webcam C525: Found keys
[ 7.630] (II) evdev: HD Webcam C525: Configuring as keyboard
[ 7.630] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2.1/1-11.2.1:1.2/input/input28/event25"
[ 7.630] (II) XINPUT: Adding extended input device "HD Webcam C525" (type: KEYBOARD, id 12)
[ 7.630] (**) Option "xkb_rules" "evdev"
[ 7.630] (**) Option "xkb_model" "pc104"
[ 7.630] (**) Option "xkb_layout" "fr"
[ 7.630] (II) config/udev: Adding input device Microsoft X-Box 360 pad (/dev/input/event24)
[ 7.630] (II) No input driver specified, ignoring this device.
[ 7.630] (II) This device may have been added with another device file.
[ 7.630] (II) config/udev: Adding input device Microsoft X-Box 360 pad (/dev/input/js1)
[ 7.630] (II) No input driver specified, ignoring this device.
[ 7.630] (II) This device may have been added with another device file.
[ 7.630] (II) config/udev: Adding input device Logitech Logitech(R) Precision(TM) Gamepad (/dev/input/event22)
[ 7.630] (II) No input driver specified, ignoring this device.
[ 7.630] (II) This device may have been added with another device file.
[ 7.630] (II) config/udev: Adding input device Logitech Logitech(R) Precision(TM) Gamepad (/dev/input/js0)
[ 7.630] (II) No input driver specified, ignoring this device.
[ 7.630] (II) This device may have been added with another device file.
[ 7.631] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event19)
[ 7.631] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.631] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.631] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "system-keyboard"
[ 7.631] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[ 7.631] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[ 7.631] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event19"
[ 7.631] (WW) evdev: Logitech Logitech Illuminated Keyboard: device file is duplicate. Ignoring.
[ 7.663] (EE) PreInit returned 8 for "Logitech Logitech Illuminated Keyboard"
[ 7.663] (II) UnloadModule: "evdev"
[ 7.663] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event20)
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "system-keyboard"
[ 7.663] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[ 7.663] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event20"
[ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Vendor 0x46d Product 0xc318
[ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found 1 mouse buttons
[ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found scroll wheel(s)
[ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found relative axes
[ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing relative x/y axes to exist.
[ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found absolute axes
[ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing absolute x/y axes to exist.
[ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found keys
[ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as mouse
[ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as keyboard
[ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Adding scrollwheel support
[ 7.663] (**) evdev: Logitech Logitech Illuminated Keyboard: YAxisMapping: buttons 4 and 5
[ 7.663] (**) evdev: Logitech Logitech Illuminated Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.663] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.1/0003:046D:C318.0002/input/input23/event20"
[ 7.663] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 13)
[ 7.663] (**) Option "xkb_rules" "evdev"
[ 7.663] (**) Option "xkb_model" "pc104"
[ 7.663] (**) Option "xkb_layout" "fr"
[ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: initialized for relative axes.
[ 7.663] (WW) evdev: Logitech Logitech Illuminated Keyboard: ignoring absolute axes.
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: (accel) keeping acceleration scheme 1
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration profile 0
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration factor: 2.000
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration threshold: 4
[ 7.663] (II) config/udev: Adding input device Logitech G100s Optical Gaming Mouse (/dev/input/event21)
[ 7.663] (**) Logitech G100s Optical Gaming Mouse: Applying InputClass "evdev pointer catchall"
[ 7.663] (**) Logitech G100s Optical Gaming Mouse: Applying InputClass "evdev pointer catchall"
[ 7.664] (II) Using input driver 'evdev' for 'Logitech G100s Optical Gaming Mouse'
[ 7.664] (**) Logitech G100s Optical Gaming Mouse: always reports core events
[ 7.664] (**) evdev: Logitech G100s Optical Gaming Mouse: Device: "/dev/input/event21"
[ 7.664] (WW) evdev: Logitech G100s Optical Gaming Mouse: device file is duplicate. Ignoring.
[ 7.690] (EE) PreInit returned 8 for "Logitech G100s Optical Gaming Mouse"
[ 7.690] (II) UnloadModule: "evdev"
[ 7.690] (II) config/udev: Adding input device Logitech G100s Optical Gaming Mouse (/dev/input/mouse0)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event7)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event8)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event9)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event4)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event5)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event6)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.691] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 7.691] (II) No input driver specified, ignoring this device.
[ 7.691] (II) This device may have been added with another device file.
[ 14.821] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 14.821] (II) NOUVEAU(0): Using hsync ranges from config file
[ 14.821] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 14.821] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 14.821] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 14.821] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 14.963] resize called 3840 1080
[ 15.466] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 15.466] (II) NOUVEAU(0): Using hsync ranges from config file
[ 15.466] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 15.466] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 15.466] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 15.466] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 15.747] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 15.747] (II) NOUVEAU(0): Using hsync ranges from config file
[ 15.747] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 15.747] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 15.747] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 15.747] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 15.947] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 15.947] (II) NOUVEAU(0): Using hsync ranges from config file
[ 15.947] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 15.947] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 15.947] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 15.947] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 16.180] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 16.180] (II) NOUVEAU(0): Using hsync ranges from config file
[ 16.180] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 16.180] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.180] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 16.180] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 16.398] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 16.398] (II) NOUVEAU(0): Using hsync ranges from config file
[ 16.398] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 16.398] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.398] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 16.398] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 16.705] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 16.705] (II) NOUVEAU(0): Using hsync ranges from config file
[ 16.705] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 16.705] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.705] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 16.705] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 3613.510] (II) config/udev: removing device Logitech Unifying Device. Wireless PID:4024
[ 3613.557] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Close
[ 3613.557] (II) UnloadModule: "evdev"
[ 3613.617] (II) config/udev: removing device HD Webcam C525
[ 3613.647] (II) evdev: HD Webcam C525: Close
[ 3613.647] (II) UnloadModule: "evdev"
[ 3614.988] (II) config/udev: Adding input device Logitech Logitech(R) Precision(TM) Gamepad (/dev/input/js0)
[ 3614.988] (II) No input driver specified, ignoring this device.
[ 3614.988] (II) This device may have been added with another device file.
[ 3614.988] (II) config/udev: Adding input device Logitech Logitech(R) Precision(TM) Gamepad (/dev/input/event23)
[ 3614.988] (II) No input driver specified, ignoring this device.
[ 3614.988] (II) This device may have been added with another device file.
[ 3614.989] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/mouse1)
[ 3614.989] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "system-keyboard"
[ 3614.989] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4024'
[ 3614.989] (**) Logitech Unifying Device. Wireless PID:4024: always reports core events
[ 3614.989] (**) evdev: Logitech Unifying Device. Wireless PID:4024: Device: "/dev/input/mouse1"
[ 3614.989] (EE) evdev: Logitech Unifying Device. Wireless PID:4024: Unable to query fd: Inappropriate ioctl for device
[ 3615.023] (EE) PreInit returned 2 for "Logitech Unifying Device. Wireless PID:4024"
[ 3615.023] (II) UnloadModule: "evdev"
[ 3615.023] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/event22)
[ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev pointer catchall"
[ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev keyboard catchall"
[ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev pointer catchall"
[ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev keyboard catchall"
[ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "system-keyboard"
[ 3615.023] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4024'
[ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: always reports core events
[ 3615.023] (**) evdev: Logitech Unifying Device. Wireless PID:4024: Device: "/dev/input/event22"
[ 3615.023] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Vendor 0x46d Product 0xc52b
[ 3615.023] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found 20 mouse buttons
[ 3615.023] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found scroll wheel(s)
[ 3615.023] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found relative axes
[ 3615.02shillshocked wrote:Since version 1.12, LightDM now relies on systemd-logind for seat
management. It means LightDM van load seats automatically as they are added
from logind.
Ha! I searched something like that during my investigations, I was wondering if it wasn't about the recent logind changes, but I gave up due to the lack of documentation -
Many contacts are not visible to alphabetical browse on Contacts after update to OS 10.2 on the Z10
After updating to 10.2 on Z10 many contacts do not appear on the Contacts list, but if I search for them, I get them one at a time. I can't browse for them, but they are still in a file somewhere. That file is no longer fully connected to the Contacts app, it seems. I'm going to call the two alternatives the "browsible" list when I refer to the Contact app working correctly and lsiting the contact alphabetically; and the "non-browsible" list, when I can only find them by a search.
One other thing of interest. When I add a contact that is in the same name as one on the non-browsible, I will get a message asking me if I want to replace the [old] contact. If I say yes, the new contact listing joins the hidden list and replaces what was there. If I say no, I get the contact added to the browsible Contact app. Thereafter, if I search on that name I get two hits: one is the old, non-browsible entry and the other is the new one that is browsible.
I did the 10.2 update when I was running the older BB link on a WinXP computer and it did not work to create a back-up, so I can't try restore. I now run Win7 64-bit and the new link seems to work okay, but that was installed after I upgraded to 10.2..
Any suggestions as to where I go to find the hidden contact entries on the non-browsible list? And how I get them to appear on the alphabetical, browsible, list when Contacts is opened?
Thanks for all answers.
KenThat's another odd thing. I did make a big effort to back-up the Z10 before the update to OS 10.2.1. But, it appears to me that by downloading the new OS to my computer [T-Mobile never does push the BB updates, not as long as I've owned it, which was a few days before the US distro, when I got hold of one for the South American market in Miami Breach] it seems to have removed my installed BB Link from my laptop. And my back-up files are empty.
Last time something like this happened. there was a workaround. Do this, do that, and suddently the contacts that are lurking somewhere on the phone, appear. I was hoping for this again.
If this is a known issue, why is it not featured on the BB page where the installer was located? I would never have downloaded OS 10.2.1, if I was warned I might lose my contacts and texts.
A sorry mess.
Ken
PS Note I corrected "visible" to "invisible" in the title of this thread -
Cannot reply to email after update to 10.8.4
Recently - I believe after updating to 10.8.4 - Apple Mail 6.5 will no longer send replies or forwards. After troubleshooting different scenarios, it seems to be related to the original message text being included in the reply/forward. I need to include all previous message text in my emails for audit purposes.
Any suggestions/fixes would be greatly appreciated.Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -f -a TextEdit
Step 4
ls -A /e*/{cr,la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
After updating to iOS 6.1.2, neither my iPhone or iPad will update apps thru App Store. Any suggestions?
What happens when you try?
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
Control key no longer works after update.
After updating Lion the control key no longer works. It beeps when pressing control and then a number key but nothing happens.
This is left control key though. Right still works?Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are four lines of text in monospaced type, which are UNIX shell commands. They’re harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of running these commands, search this site for other discussions in which they’ve been used without any report of ill effects.
Some of the commands will line-wrap in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search.
Step 1
Copy or drag -- do not type -- the line below into the Terminal window, then press return:
kextstat -kl | awk ' !/apple/ { print $6 $7 } '
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Step 3
launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
Step 4
ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, change it to something like “[email protected]” before posting.
Remember, this is all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
You can then quit Terminal. -
Xorg doesn't start after update
After updating this day (my system was last updated at the beginning of July
this year) I have some problem with Xorg. The server just doesn't start, and
the screen is black. I can get back to the console with Alt-F1.
Here's my Xorg.0.log:
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux Data 2.6.25-ARCH #1 SMP PREEMPT Mon Jul 14 15:25:51 UTC 2008 i686
Build Date: 21 June 2008 05:47:59PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 5 18:54:03 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "LCD Display"
(**) | |-->Device "SiS"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e0a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0630 card 0000,0000 rev 31 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80
(II) PCI: 00:01:0: chip 1039,0018 card 0000,0000 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 1039,0900 card 1043,1455 rev 82 class 02,00,00 hdr 00
(II) PCI: 00:01:2: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:01:3: chip 1039,7001 card 1039,7000 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:01:4: chip 1039,7018 card 1039,7018 rev 02 class 04,01,00 hdr 00
(II) PCI: 00:01:6: chip 1039,7013 card 1043,1456 rev a0 class 07,03,00 hdr 00
(II) PCI: 00:02:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0a:0: chip 1180,0476 card 1000,0000 rev 80 class 06,07,00 hdr 82
(II) PCI: 00:0a:1: chip 1180,0476 card 1800,0000 rev 80 class 06,07,00 hdr 82
(II) PCI: 01:00:0: chip 1039,6300 card 1043,1452 rev 31 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd1800000 - 0xd1ffffff (0x800000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xe7efffff (0xff00000) MX[b]
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (0:10:0), (0,2,5), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[1] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0x24000000 - 0x27ffffff (0x4000000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x20000000 - 0x23ffffff (0x4000000) MX[b]
(II) PCI-to-CardBus bridge:
(II) Bus 6: bridge is at (0:10:1), (0,6,9), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x00001800 - 0x000018ff (0x100) IX[b]
[1] -1 0 0x00001c00 - 0x00001cff (0x100) IX[b]
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0x2c000000 - 0x2fffffff (0x4000000) MX[b]
(II) Bus 6 prefetchable memory range:
[0] -1 0 0x28000000 - 0x2bffffff (0x4000000) MX[b]
(--) PCI:*(1:0:0) Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter rev 49, Mem @ 0xd8000000/27, 0xd1800000/17, I/O @ 0xa800/7
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xd4000000 from 0xd7ffffff to 0xd3ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[1] -1 0 0xd2800000 - 0xd2800fff (0x1000) MX[b]
[2] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[b]
[3] -1 0 0xd3800000 - 0xd3800fff (0x1000) MX[b]
[4] -1 0 0xd4000000 - 0xd3ffffff (0x0) MX[b]O
[5] -1 0 0xd1800000 - 0xd181ffff (0x20000) MX[b](B)
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[7] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[b]
[8] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[9] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[10] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[11] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[12] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[1] -1 0 0xd2800000 - 0xd2800fff (0x1000) MX[b]
[2] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[b]
[3] -1 0 0xd3800000 - 0xd3800fff (0x1000) MX[b]
[4] -1 0 0xd4000000 - 0xd3ffffff (0x0) MX[b]O
[5] -1 0 0xd1800000 - 0xd181ffff (0x20000) MX[b](B)
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[7] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[b]
[8] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[9] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[10] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[11] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[12] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[5] -1 0 0xd2800000 - 0xd2800fff (0x1000) MX[b]
[6] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[b]
[7] -1 0 0xd3800000 - 0xd3800fff (0x1000) MX[b]
[8] -1 0 0xd4000000 - 0xd3ffffff (0x0) MX[b]O
[9] -1 0 0xd1800000 - 0xd181ffff (0x20000) MX[b](B)
[10] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[13] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[b]
[14] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[15] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[16] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[17] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[18] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded by default.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "sis"
(II) Loading /usr/lib/xorg/modules/drivers//sis_drv.so
(II) Module sis: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 0.9.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
Backtrace:
And here's what the server writes out:
Backtrace:
Inconsistency detected by ld.so: dl-open.c: 260: dl_open_worker: \
Assertion `_dl_debug_initialize (0, args->nsid)->r_state == RT_CONSISTENT' failed!
waiting for X server to begin accepting connections
giving up.
xinit: Connection reset by peer (errno 104): unable to connect to X server
xinit: No such process (errno 3): Server error.
Any ideas? Because I have no idea, what is happening.
Edit (08.08.2008): All right, don't bother answering this question anymore. The problem is no longer important. This topic can be closed, since it won't be solved.
(I think it was caused by some error during copying files while updating my system.)
Last edited by TPJ (2008-08-08 08:42:13)sand_man wrote:Is /tmp full?
Damn you're right. The pacman cache filled the disk...
Problem solved - thanks!
Only question left is:What are the correct permissions for /tmp since I'd like to set them back to default.
Last edited by Isildur (2009-08-16 14:22:23) -
Mail needs to be sent after updating the salary column of emp table
Hi,
we have table test_emp_table, oracle form based application is running on this table...
it conatins salary column, we have requirement that, when every any update to the salary column, a mail needs to be sent to concerned person with new and old salary values..
I did that using the following procedure...
===========
-- Create Temporary Table to hold the Updated values
create table email_parameters
( id number primary key,
oldsal varchar2(10),
newsal varchar2(10),
ename varchar2(100));
--- Create Procedure
CREATE OR REPLACE PROCEDURE send_email_new (
l_job IN NUMBER ) is
l_oldsal varchar2(100);
l_newsal varchar2(100);
l_emp_name varchar2(100);
l_message varchar2(100);
BEGIN
SELECT oldsal
INTO l_oldsal
FROM email_parameters
WHERE ID = l_job;
SELECT newsal
INTO l_newsal
FROM email_parameters
WHERE ID = l_job;
SELECT ename
INTO l_emp_name
FROM email_parameters
WHERE ID = l_job;
l_message:=
'Employee Name= '
|| l_emp_name
|| chr(10)||chr(10)
|| 'Old Salary= '
|| l_oldsal
|| chr(10)||chr(10)
|| 'New Salary= '
|| l_newsal;
send_mail(l_message);
DELETE FROM email_parameters
WHERE ID = l_job;
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.put_line (DBMS_UTILITY.format_error_stack);
DBMS_OUTPUT.put_line (DBMS_UTILITY.format_call_stack);
END;
--- Create Trigger
create or replace trigger send_email_trg
after update on TEST_EMP_TABLE
for each row
declare
l_job number;
begin
dbms_job.submit (job => l_job,
what => 'send_email_new(job);' );
insert into email_parameters
values (l_job, :old.sal,:new.sal,:new.ename);
end send_email_trg;
-- Create Procedure for Sending Mail
create or replace procedure send_mail(l_message varchar2) is
c utl_smtp.connection;
PROCEDURE send_header(name VARCHAR2, header VARCHAR2) AS
BEGIN
utl_smtp.write_data(c,name ||':'|| header || UTL_TCP.CRLF);
END;
BEGIN
c := utl_smtp.open_connection('192.168.0.18');
utl_smtp.helo(c, 'abc.com');
utl_smtp.mail(c, '[email protected]');
utl_smtp.rcpt(c, '[email protected]');
utl_smtp.open_data(c);
send_header('From', '[email protected]');
send_header('To', '[email protected]');
send_header('Subject', 'Warning: Employee Solary has been updated!');
utl_smtp.write_data(c, UTL_TCP.CRLF || l_message);
utl_smtp.close_data(c);
utl_smtp.quit(c);
EXCEPTION
WHEN utl_smtp.transient_error OR utl_smtp.permanent_error THEN
BEGIN
utl_smtp.quit(c);
EXCEPTION
WHEN utl_smtp.transient_error
OR utl_smtp.permanent_error THEN
NULL;
END;
raise_application_error(-20000, SQLERRM);
END;
====================
But I have doubt, if there is any problem with mail server, if user is updating salary column from form based application at same time....
will table trigger allows him to save the new record or not????? or will he get any errors????thanks justin...
I have written that code..but it works...problem is ...i am not able to understand the flow...what happens in the order, until mail is sent...
i have another code.....
I have written with out dbms_job, i have witten directly in the trigger itself...
Tom suggested the procedure, what i have given above..but not the below procedure....
I am not able to understand, what is the difference between them.....
CREATE OR REPLACE TRIGGER test_emp_table_trg
AFTER UPDATE
ON test_emp_table
FOR EACH ROW
WHEN (NEW.sal <> OLD.sal)
DECLARE
l_employee_name VARCHAR2 (240);
l_old_sal VARCHAR2 (240);
l_new_sal VARCHAR2 (240);
l_message VARCHAR2 (240);
BEGIN
/* Gets the employee full name */
BEGIN
SELECT ename
INTO l_employee_name
FROM test_emp_table
WHERE empno = :OLD.empno;
EXCEPTION
WHEN OTHERS
THEN
l_employee_name := NULL;
END;
/* Gets the old Salary */
BEGIN
SELECT sal
INTO l_old_sal
FROM test_emp_table
WHERE empno = :OLD.empno;
EXCEPTION
WHEN OTHERS
THEN
l_old_sal := 0;
END;
/* Gets the new position name */
BEGIN
SELECT sal
INTO l_new_sal
FROM test_emp_table
WHERE empno= :NEW.empno;
EXCEPTION
WHEN OTHERS
THEN
l_new_sal := 0;
END;
l_message:=
'Employee Name= '
|| l_employee_name
|| 'Old Salary= '
|| l_old_sal
|| 'New Salary= '
|| l_new_sal;
BEGIN
send_mail (l_message);
END;
==========
can you please describe it clearly???
thanks in advance my dear friend????
Edited by: oraDBA2 on Oct 4, 2008 10:26 PM -
N97 Arabic language lost after updating.....
Hello Everybody.
I will make it simple this time.
I have 'middle east' version of nokia n97 with Arabic language included."I could write in Arabic"
after updating to V22 I couldn't do that any more?
Is it possible to reinstall that language back without Hard resetting my phone ?farby wrote:
This thread will explain the reason.. Be warned that any Future Firmware Updates / Re-install will again remove this language and you will need to get it installed again thru' Nokia Care...
Future firmware updates will not remove the language after that, if whomever does the flashing also changes the product code to match the new firmware language variant.
Maybe you are looking for
-
Does not show anything in Flow tab in Interface
Hi, I am new in ODI and doing File to File data transformation. I have done this successfully. But here I used Global Context. Instead of Global Context of I used my own Context that I have created in the Overview tab of interface the source , stagin
-
How do I put a picture in an email
I want to put a pdf in an email, but not as an attachment, I want the email to open and the picture to all ready be there..just dont know how, thanks for your help
-
Laserjet Pro CP1525 color printing question
This is a color printer, but what if I am only printing a document that is just text (black and white). Do I need to so into my printer setting everytime and change it to grayscale just to print or worry that it will use the color to make black? I a
-
Deploy Image without the need of a running Windows installation
Current situation: You have to have Windows installed on a destination client in order to be able to provision a new Base Layer Feature request: PXE boot a Windows PE system to estabilish a connection with the Mirage server but having the possibility
-
Hello! I have just received my 2 new cheap wrt54g2 routers. I already have a router with dhcp in my network, so I just need this routers to connect wired net and wireless. Is there any way to use this routers as a bridge? Earlier I used asus router,