Warning! Apostrophes break attachments in 11.1 sp1
In versions prior to sp1 having an apostrophe in a file
name or in a directory path name was not an issue. Now
with version 11.1 sp1 these paths will render an "Access
Denied" when trying to view.
Current resolution
is to wait till CM 12 arrives.
One of my users found that by right-clicking on the
attachment and selecting "Open" the file will open,
even when it has an apostrophe. It's a bit easier than
what I was having them do - Save the file or email it
to themselves.
Similar Messages
-
Lots of Warning 1706 logged on VMM 2008 R2 Sp1
Hi,
I have VMM 2008 R2 Sp1 server with 3 Hyper-V hosts connected. In VM Manager event log I have noticed lots of 1706 warnings:
"Job <Id> (Refresh virtual machine) failed to complete".
Is it anything dangerous for my servers? Should I troubleshoot it?There are also "Job <Id> (Refresh host) failed to complete" 1706 warnings logged. Could anyone help me with this? How to troubleshoot this problem?
-
Delayed attachments with Exchange 2010 SP1
Hi folks,
we have a big issue here with Apple Mail in 10.6.8, 10.7.4 and 10.8.0, but particularly in 10.6.8.
When someone receives an e-mail with an attachment, it may be, that the attachment is delayed up to 5 hours. But in the Outlook Web Access, in Outlook 2011 for Mac and on iOS it appears immediately.
The exchange server is a 2010 SP 1 RU5.
Does any one have an idea on this?
Thanks a lot,
yaenchHi,
Please refer to this link for exchange integration with Lync 2010
http://blog.schertz.name/2010/11/lync-and-exchange-im-integration/
Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question. -
Hyphenation warning when launching InDesign CC
Every time I launch InDesign CC I am presented with the following warning: “Hyphenation breaks may change if you edit the text in this document. The following hyphenation services are not installed on this system - Proximity (English: USA)” What is this and what should I do about it?
Simple and sweet. All fixed. Thanks.
-
Nokia 500 Review on Symbian Belle
After the update screen went through, I had my fingers crossed, and despite the screen saying “15 minutes remaining,” the update was finished in about 5 minutes.
Upon startup, there was a line of dots (….) which lighted up on after the other sort of like a loading bar and it was. After the loading came the usual language selection and Ovi suite options (“Create an Ovi Account” “I have an account” and of course “Later.”) after going through the Ovi suite options (literally took 10 seconds) my carrier had charged me about 0.45cents (USD cents) for the tips I had signed up on while I still had Symbian Anna on the device. Nokia suite was installing support software after the phone booted up and after 5 more minutes, I set the date, time and location and I was presented with the home screen. The standard home screen as on other Belle devices with the Flip clock, Ovi Social widget and 4 icons (Camera, contacts, Angry birds [oh yea!] and Maps) at the last widget’s position; at the bottom edge of the screen are menu, call and home screen options. The widgets take a few seconds to load but once they load they don’t lag. The second home screen has “Favorite contacts” widgets and 4 more icons (Messaging, Store, Calendar and Web), the third home screen has a Music player widget and the 4th home screen is blank for the user to customize. Unlike other Nokia/Symbian Belle devices, the Nokia 500 only has 4 home screens as opposed to 6.
The lock screen is similar to the Anna screen and is only redesigned. The Belle home screen allows usage of a background unlike Symbian Anna’s.
Now the menu: unlike Symbian Anna, the menu does not have an applications folder so everything is spread out on the home screen creating a mini mess. Luckily, there is an option to create a new folder in which to put your apps in.
In Symbian Anna, the keypad for ‘Call’ was not very user friendly as the ‘*’ and ‘#’ where not where they would be on a physical alphanumerical keypad, but on Belle, the keypad is identical to the physical one and very responsive.
Apps:
While Symbian Anna lagged on the Nokia 500, Nokia Belle is very smooth. I don’t see any major changes with the camera on the 500 and the quality remains the same. There have been some rumors going around about the Nokia 500 getting HD video with the Belle update but these rumors are not true and the Nokia 500 remains with the usual 640p*313p video. While on Symbian Anna, there was no ‘Gallery’ icon but there is one on Symbian Belle and a separate ‘Videos’ icon is there too for easy access to downloaded videos (yes downloaded videos or those NOT taken with the phone’s camera). The angry birds app is a hugely wanted app for the Nokia 500 and is very identical to the computer version. Actually, it IS the computer version in smaller scale. Symbian Belle still allows the user to kill unwanted applications running in the background by holding down the menu key and clicking the ‘X’ icon. Ovi maps on the device is version 3.06 as predicted and even if not version 3.08, it still gets the job done.
The settings menu is the same and nothing major there too. On Symbian Anna, the Nokia 500 has many themes for different colors but on Symbian/Nokia Belle, the 500 only has one “Nokia Evolve” theme which means the users have to download their own themes for personalization.
Overall, the icons seem a bit smaller especially on the home screen and this makes the phone look abit tiny which it is. The size was not brought out in Symbian Anna but in Belle we can see how small the screen on the phone is compared to devices like the E7, N8 and Nokia 701.
With Symbian Belle, the Nokia 500 is able to really show its 1Ghz processor at work and even if it might not be able to play (fancy) 3D games due to the lack of a OpenGL compatible GPU, it can still allow us to play OpenVG games such as “Asphalt 6: Adrenaline” and “Nuke Defender 3D” available from Ovi store.
Review by: Hamdhan
MODERATORS NOTE: E-mail address has been removed, please do not share personal information openly on the forums.
Proud Owner of a Nokia (1Ghz Nokia Belle Device).
"One does not simply buy a Nokia."
"iPhone falls = Screen breaks | Nokia falls = floor breaks"
Attachments:
DSC_6822_filtered.jpg 2533 KBGreat to see you are a happy user. I have just bought two Nokia 500 phones (another for my wife), upgraded to Belle, and both have the same infuriating problems:
- system crashes half a dozen times a day without any warning (during calls, browsing, text messaging)
- if I change the language for text messages, I cannot type anything (SMS) any more
- when phone goes to sleep, it often won't wake up and I need to remove the battery (after doing this 4-5 times a day one starts to get very frustrated).
I am very disappointed and cannot recommend the phone to anyone. First Nokia that I feel this way with. -
Creation of delivery when sales order is saved in VA01
Hi All
We got the requirement in such a way that
we are creating sales order of type (ZOR -standard order ) . Configrration is donde in such a way that when the order is saved one dilvery will be created for that order of deilvery type ZLF .as this is assginned as default delivery type in VOV8 .
Hre we have two delivery types ZLF and ZF and we have diffrent different item categories for that sales order like ZZTC , ZPU ,
ZTDP .
our requirement is as follows
when we create sales order through va01 (order type - ZOR standard order ) having onlu one item category ZPU then delivery should be created of type ZLF it is happing correctly .
when we create a sales order through va01 having non ZPU item categroies like ZZTC and ZTDP dlivey should not be created automatically for that sales oder on saving that order . this is also happeing correctly
but the problem is
when we create a sales order having diffrene item categories ( one condiotn here one item should be ZPU) and other item is ZZTC while saving the sales order delivery is getting created partially for one item only not for two items i mean delivery is getting created only for item categroy zpu the item with type ZZTC is not gettting added to that delivey .
for exmaple
sales order 1234
item category ZPU
item category ZZTC
delivery created with only one item ZPU
May i know any requirments (routines ) are thre to solve this in VOFM .
let me know how to hanlde this issue .
Regards
Sunil
Moderator Message: It looks like you are using the forums to get your work done for free. This is not a help-desk to get your Consulting work done. Also you have closed only 1 out of total 68 questions till date. Since you are such a lazy and irresponsible forum member, Im giving you the final warning against breaking the rules of this forum. One more violation and you userid will be deleted.
Edited by: kishan P on Oct 14, 2010 4:36 PMHi Mohanty,
I think the Immediate Delivery under Shipping for that order type may have value A or X, Clear that value.
1) Goto VOV8 tansaction.
2) Select the Sales order type (For eg: OR for standard order) and double click on that
3) Under Shipping tab, Set Immediate Delivery with Blank value
Plz reward points if it is helpful
Thanks,
Vinay -
JOB RSGENYTT - System core dump
Hi SDN,
While trying to upgrade our 4.6B system to ERP, JOB_RSGENYTT phase stops with a core dump, this is what i've in ST22
Someone knows how i can analyse this :S
regards
Pedro Rodrigues
ABAP runtime errors SYSTEM_CORE_DUMPED
Occurred on 17.11.2007 at 19:53:23
Process terminated by signal 0.
What happened?
Error in the SAP Basis system
ABAP/4 processor detected an internal system error.
The current ABAP program "RSGENYTT " had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
Please make a note of the actions and input which caused the error.
Please make a note of the actions and input which caused the error.
To resolve the problem, contact your
SAP system administrator.
Choose "Print" for a hard coopy of the termination message. You can
display and adminster short dump messages using Transaction ST22.
Error analysis
An SAP System process was terminated by an operating system signal.
Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
Last error logged in SAP kernel
Component............ "Taskhandler"
Place................ "SAP-Server appserver_DEV_00 on host appserver (wp 0)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 8628
The error reported by the operating system is:
Error number..... " "
Error text....... " "
How to correct the error
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "46B"
Application server....... "appserver"
Network address.......... "192.39.0.2"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 80686"
Database server.......... "appserver"
Database type............ "MSSQL"
Database name............ "DEV"
Database owner........... "dev"
Character set............ "English_United State"
SAP kernel............... "46D"
Created on............... "Aug 16 2007 21:26:12"
Created in............... "NT 4.0 1381 Service Pack 6 x86 MS VC++ 12.00"
Database version......... "SQL_Server_7.00 "
Patch level.............. "2337"
Patch text............... " "
Supported environment....
Database................. "MSSQL 6.5.213 or higher, MSSQL 7.0.1 or higher"
SAP database version..... "46D"
Operating system......... "Windows NT 4.0, Windows NT 5.0, Windows NT 5.1,
Windows NT 5.2, , System build information:,
, LCHN : "
User, transaction...
Client.............. 000
User................ "DDIC"
Language key........ "E"
Transaction......... "SE38 "
Program............. "RSGENYTT "
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where termination occurred
The termination occurred in the ABAP/4 program "RSGENYTT " in
The main program was "RSGENYTT ".
The termination occurred in line 0
of the source code of program " " (when calling the editor 00).
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 1 SY-DBCNT 1260
SY-FDPOS 0 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1
Chosen variables
Name.......................... Contents.1....+....2....+....3....+....4
LV_COUNT 0
0000
0000
LV_INDEX 0
0000
0000
LT_DDYTT Table[initial]
0000FFFD
0000FFFF
LT_DDYTF Table[initial]
0000FFFD
0000FFFF
LT_PUTTB_SHD ############################ #######ï###
000000000000000000000000000020000000E000
00000000000000000000000040000A001000F400
... + 40 ####ð###ð###################$###xæ-?ð#/?
1000F000F000000000008000000020007E23F823
00000800040000000000C0002000430086DF02FF
... + 80 #?4?########################5###
93330000000000000000000000003000
8F4F0000000000000000000000005000
LS_PUTTB_SHD /BEV1/CADD03VTV
2445324444335552222222222222222222222222
F2561F3144036460000000000000000000000000
... + 40
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80 002 7
2222222222222222333222222222222222232222
0000000000000000002000000000000000070000
... + 120 VLE
22222544
000006C
LV_SHD_DDXTT DDXTT~
445557222222222222222222222222
44844E000000000000000000000000
GC_BASREL_UPDATED U
5
5
LS_PUTTB_SHD-TABNAME /BEV1/CADD03VTV
244532444433555222222222222222
F2561F314403646000000000000000
LS_DDYTT ######
2222222222222222222222222222222222000000
0000000000000000000000000000000000000000
... + 40 ##########
0000000000222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80 ##########
2222222222220000000000222222222222222222
0000000000000000000000000000000000000000
... + 120 ###### #########
22222222
0000000
SYST ############ï###########################
000000000000E000000000000000000000000000
000000001000F400000000000000000000000000
... + 40 ì#######################################
E000000000000000000000000000000000008000
C40000001000000010000000000000000000C000
... + 80 ########################################
0000000000000000000000000000000000000000
0000000000000000200000000000000000000000
... + 120 ########################################
00000000
0000000
SY-SUBRC 0
0000
0000
%_SSCR[] ############################`###########
0000000000000000000000000000600000000000
0000000000000000000000004000030000000000
... + 40 ################ÿÿÿÿ####################
1000000000000000FFFF00000000000000000000
0000000000001000FFFF41F07000430000000000
... + 80 ################################
00000000000000000000000000000000
00000000000000000000000000000000
10032c92 807d1400 cmp byte ptr ,0x0 ss:062ce90a=00
10032c96 7422 jz dsql_db_init+0x30d0a (10032cba)
10032c98 394e08 cmp ,ecx ds:070aeb72=????????
10032c9b 751d jnz dsql_db_init+0x30d0a (10032cba)
10032c9d 8d047f lea eax,[edi+edi*2] ds:00000000=????????
10032ca0 c1e003 shl eax,0x3
10032ca3 8bd0 mov edx,eax
10032ca5 8b4518 mov eax,[ebp+0x18] ss:062ce90a=00000000
10032ca8 2bc2 sub eax,edx
10032caa 99 cdq
FAULT-> 10032cab f7fb idiv ebx
10032cad 0fbfd0 movsx edx,ax
10032cb0 eb0b jmp dsql_db_init+0x30d0d (10032cbd)
10032cb2 6a02 push 0x2
10032cb4 58 pop eax
10032cb5 e9df040000 jmp dsql_db_init+0x311e9 (10033199)
10032cba 6a01 push 0x1
10032cbc 5a pop edx
10032cbd 803dd95a1d1000 ds:101d5ad9=00
cmp byte ptr ,0x0
10032cc4 7409 jz dsql_db_init+0x30d1f (10032ccf)
10032cc6 833dac591d1006 ds:101d59ac=00000006
cmp dword ptr ,0x6
10032ccd 7416 jz dsql_db_init+0x30d35 (10032ce5)
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
031688dc 1000d5df 00000000 018b4eb8 00000000 00000001 dbmssslib!dsql_db_init
03168978 10001cb3 03f41f80 018b6470 018b4eb8 00000035 dbmssslib!dsql_db_init
031689c4 008f47dc 010035d0 00000035 00000001 018b6470 dbmssslib!DbSlVersion
031689f4 008f1120 00000001 00000000 3f2db20c 00000000 disp+work!
054fffb8 77e64829 03e7bf20 00000000 00000000 03e7bf20 MSVCRT!endthreadex
054fffec 00000000 77bcb4bc 03e7bf20 00000000 00000000 kernel32!GetModuleHandleA
List of ABAP programs affected
Type Program Gen. date time LoadSize RollSize
Prg RSGENYTT 17.11.2007 18:56:44 112 3 840 loade
Prg SAPMSSY0 26.03.2001 12:10:18 1 6 512 loade
Prg RSDBRUNT 26.03.2001 12:09:07 19 22 376 loade
Prg RSDBSPBL 26.03.2001 11:21:26 24 6 512 loade
Prg SAPDB__S 01.06.1999 12:10:01 36 1 408 loade
Prg RSDBSPMC 01.06.1999 12:09:54 34 7 728 loade
Typ DDSHDESCR 03.09.1997 03:05:16 955 048 loade
Typ SPPARAMS 07.05.1997 13:10:38 956 024 loade
Prg SAPLSABE 01.06.1999 12:10:15 100 1 288 loade
Prg SAPLSECU 04.04.2001 18:30:22 28 6 608 loade
Prg SAPMSSY3 26.03.2001 10:57:11 269 5 368 loade
Typ ABDBG 25.05.1999 15:31:57 716 1 360 loade
Prg SAPMSSYD 22.03.2001 18:03:09 12 1 336 loade
Prg SAPFSPOR 19.10.1999 09:39:27 59 216 loade
Prg SAPLSCNT 01.06.1999 12:10:15 15 2 624 loade
Prg SAPLSVSM 22.03.2001 17:23:10 61 2 552 loade
Prg SAPLSGUI 26.03.2001 12:08:56 4 3 768 loade
Prg SAPLSTTM 22.03.2001 15:09:40 2 5 392 loade
Prg SAPLSBDC 22.03.2001 15:09:07 6 6 560 loade
Prg CL_DATAPROVIDER=============== 22.03.2001 16:53:29 62 4 128 loade
Typ OBJ_RECORD 14.02.1998 08:30:43 883 048 loade
Prg SAPLSTUP 26.03.2001 11:45:52 16 9 160 loade
Prg SAPLCNDP 26.03.2001 10:57:04 3 15 744 loade
Prg SAPSHDTV 26.03.2001 11:45:07 14 3 864 loade
Prg SAPFGUICNTL 26.03.2001 10:42:02 10 1 408 loade
Prg CL_GUI_CFW==================== 26.03.2001 11:21:21 11 13 192 loade
Prg SAPLOLEA 17.11.2007 13:23:33 5 7 656 loade
Prg SAPLSFES 26.03.2001 12:08:50 7 10 544 loade
Prg SAPLGRFC 22.03.2001 15:08:46 60 1 384 loade
Prg SAPLSTRF 17.11.2007 13:23:33 217 10 424 loade
Prg SAPLSTFI 26.03.2001 12:10:04 216 5 296 loade
Prg SAPLSUGI 17.11.2007 18:56:44 673 35 280 loade
Typ PUTTB_SHD 17.11.2007 11:26:20 682 120 loade
Prg SAPLSUGN 17.11.2007 18:56:44 691 5 296 loade
Typ DDFTX 05.11.1997 02:52:59 224 072 loade
Prg SAPLSDNT 17.11.2007 18:56:44 135 18 368 loade
Prg SAPLSDB1 17.11.2007 11:26:20 114 6 464 loade
Prg SDB1FMSS 04.04.2001 18:30:57 113 4 104 loade
Typ DDXTT 17.11.2007 18:56:44 235 048 loade
Prg RDTCMPTB 17.11.2007 18:56:44 414 10 376 loade
Prg SAPLSDB2 17.11.2007 18:56:44 225 39 216 loade
Prg SAPLSDB3 17.11.2007 18:56:44 271 9 136 loade
Prg SAPLSDD0 17.11.2007 13:23:33 133 5 200 loade
Prg RADIXTOL 01.06.1999 12:09:34 150 2 504 loade
Prg SDB2FDBS 17.11.2007 17:43:27 215 11 784 loade
Prg SAPLSDD2 01.06.1999 12:10:16 237 3 888 loade
Prg SDB2FMSS 17.11.2007 17:43:27 190 17 152 loade
Typ UVERS 16.07.1997 14:46:33 347 072 loade
Typ DD092526V 20.08.1998 11:15:55 781 048 loade
Typ X030L 05.11.1997 03:07:56 709 096 loade
Prg RADBTOUT 01.06.1999 12:09:34 124 10 448 loade
Prg SAPCNVE 01.06.1999 12:10:01 101 168 loade
Prg SAPLSDAD 17.11.2007 18:56:44 935 71 752 loade
List of internal tables
Header of PROG=RSGENYTTDATA=GT_PROT[]
TABH+ 0(20) = 0000000000000000000000000000000000000000
TABH+ 20(20) = 0000000004000000500700000000000007000000
TABH+ 40(20) = 1E0000001E0000001E0000001E000000FFFFFFFF
TABH+ 60(20) = E3000000020000000403000018972D3F00000000
TABH+ 80(20) = 0000000000000000000000000000000000000000
TABH+100(12) = 000000000000000013000000
id = 19 (0x13000000)
fill = 7 (0x07000000)
lineAdmin = 30 (0x1E000000)
lineAlloc = 30 (0x1E000000)
tabi = 0x18972D3F
pghook = 0x00000000
index = 0x00000000
hshook = 0x00000000
btree = 0x00000000
reghook = 0x00000000
lopc = 0 (0x00000000)
occu = 30 (0x1E000000)
rank = 30 (0x1E000000)
loop = -1 (0xFFFFFFFF)
leng = 227 (0xE300)
fcnt = 0 (0x0000)
lock = 0
shrd = 0
access = 1 (stdAccess)
idxKind = 0 (noIndex)
unique = 2 (nonUnique)
cmpMode = 2 (cmpSingleMcmp)
pb_func = 0x00000000
pb_handle = 0x00000000
Directory of application tables (contents)
Program
Name.......... Contents.1........2........3....+....
Directory of data areas (administration information)
Program
No.. Name.......... Lgth Ofsg Type Next Gen date Gen time
SYST
L not assigned 751 0 IN
M /%_LISTTABLE 750 1 CO 0
T global stack 749 1 2 GL
RSGENYTT
A global data 0 3 DA
L constant dat 1 4 LI .0 .0472
L constant dat 2 5 LI .0 .0367
L not assigned 3 6 IN
L SYST 4 7 TA 00
L SY 5 8 TA
L RSJOBINFO 6 9 TA
M /%_SYS%% 7 0 CO
M field symbol 8 1 FS
M /%_SSCR 9 2 CO 0
L VARI 10 3 TA
L PUTTB_SHD 11 4 TA
L DDYTT 12 5 TA
L DDYTF 13 6 TA
M field symbol 14 7 FS
M field symbol 15 8 FS
M field symbol 16 9 FS
SAPMSSY0
A global data 0 0 DA
L constant dat 1 1 LI .0 .077E
L constant dat 2 2 LI .0 .06B8
L not assigned 3 3 IN
L SYST 4 4 TA
L SY 5 5 TA
L RSJOBINFO 6 6 TA
M /%_SYS%% 7 7 CO
M field symbol 8 8 FS
M /%_LISTTABLE 9 9 CO
M /%_SYS000 10 0 CO
L TFDIR 11 1 TA
M field symbol 12 2 FS
M field symbol 13 3 FS
L TRDIR 14 4 TA
L ABMSG 15 5 TA
M field symbol 16 6 FS
L text pool 17 7 TP
RSDBRUNT
A global data 0 8 DA
L constant dat 1 9 LI .0 .1B8A
L constant dat 2 0 LI .0 .1780
L not assigned 3 1 IN
L SYST 4 2 TA
L SY 5 3 TA
L RSJOBINFO 6 4 TA
M /%_SYS%% 7 5 CO
M field symbol 8 6 FS
M /%_SSCR 9 7 CO
L VARI 10 8 TA
L TRDIR 11 9 TA
L TUVID 12 0 TA
L RSVUVINT 13 1 TA
L VARID 14 2 TA
L DFIES 15 3 TA
L SSCRTEXTS 16 4 TA
L SSCRFIELDS 17 5 TA
M /%_DYN_SEL 18 6 CO
M /%_FIELD_SEL 19 7 CO
M /%_RUNT_XX_% 20 8 CO
M field symbol 21 9 FS
M field symbol 22 0 FS
M field symbol 23 1 FS
M field symbol 24 2 FS
M field symbol 25 3 FS
L text pool 26 4 TP
RSDBSPBL
A global data 0 5 DA
L constant dat 1 6 LI .0 .09CE
L constant dat 2 7 LI .0 .0908
L not assigned 3 8 IN
L SYST 4 9 TA
L SY 5 0 TA
L RSJOBINFO 6 1 TA
M /%_SYS%% 7 2 CO
M field symbol 8 3 FS
M /%_RUNT_XX_% 9 4 CO
L text pool 10 5 TP
SAPDB__S
A global data 0 6 DA
L constant dat 1 7 LI .0 .020D
L constant dat 2 8 LI .0 .01B0
L not assigned 3 9 IN
L SYST 4 0 TA
L SY 5 1 TA
L RSJOBINFO 6 2 TA
M /%_SYS%% 7 3 CO
M field symbol 8 4 FS
M /%_SSCR 9 5 CO
L VARI 10 6 TA
L text pool 11 7 TP
A global data 12 8 DA 0
RSDBSPMC
A global data 0 9 DA
L constant dat 1 0 LI .0 .0BD7
L constant dat 2 1 LI .0 .0AE8
L not assigned 3 2 IN
L SYST 4 3 TA
L SY 5 4 TA
L RSJOBINFO 6 5 TA
M /%_SYS%% 7 6 CO
M field symbol 8 7 FS
M /%_SSCR 9 8 CO
M /%_RUNT_XX_% 10 9 CO
1 L DD23L 11 0 TA
1 L DD23T 12 1 TA
1 L RSMDY 13 2 TA
1 M field symbol 14 3 FS
1 L text pool 15 4 TP
SAPLSABE
1 A global data 0 5 DA
1 L constant dat 1 6 LI .0 .014A
1 L constant dat 2 7 LI .0 .0101
1 L not assigned 3 8 IN
1 L SYST 4 9 TA
1 L SY 5 0 TA
1 L RSJOBINFO 6 1 TA
1 M /%_SYS%% 7 2 CO
1 M field symbol 8 3 FS
1 L TRDIR 9 4 TA
1 M field symbol 10 5 FS
1 L text pool 11 6 TP
SAPLSECU
1 A global data 0 7 DA
1 L constant dat 1 8 LI .0 .0918
1 L constant dat 2 9 LI .0 .070B
1 L not assigned 3 0 IN
1 L SYST 4 1 TA
1 L SY 5 2 TA
1 L RSJOBINFO 6 3 TA
1 M /%_SYS%% 7 4 CO
1 M field symbol 8 5 FS
1 L TSL1D 9 6 TA
1 L TPFYPROPTY 10 7 TA
1 M field symbol 11 8 FS
1 L text pool 12 9 TP
RSGENYTT
1 L ABDBG 127 0 TA
SAPMSSY3
1 A global data 0 1 DA
1 L constant dat 1 2 LI .0 .0A38
1 L constant dat 2 3 LI .0 .09BF
1 L not assigned 3 4 IN
1 L SYST 4 5 TA
1 L SY 5 6 TA
1 L RSJOBINFO 6 7 TA
1 M /%_SYS%% 7 8 CO
1 M field symbol 8 9 FS
1 M /%_LISTTABLE 9 0 CO
1 M /%_SYS000 10 1 CO
1 L ABDBG 11 2 TA
1 M field symbol 12 3 FS
1 Y 13 4 LA 0
1 Y 14 5 LA 0
1 Y 15 6 LA 0
1 Y 16 7 LA 0
1 Y 17 8 LA 0
1 Y 18 9 LA 0Hi lucio,
thanks for your quick answer, update of DW didn't work, here you are dev_w22 trace
trc file: "dev_w22", trc level: 1, release: "46D"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Mon Nov 19 18:30:29 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' ...
B Library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' loaded
B Version of library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' is "46D.00", patchlevel (0.2328)
B New connection 0 created
M relno 4640
M patchlevel 0
M patchno 2352
M intno 0
M pid 5400
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc22 5400) [dpxxdisp.c 976]
I MtxInit: -2 0 0
I
I Mon Nov 19 18:30:31 2007
I *** ERROR => New Process with the same PID
ERROR_INVALID_ADDRESS: Attempt to access invalid address. [semnt.c 1513]
X EmInit: MmSetImplementation( 2 ).
X <ES> client 22 initializing ....
X Using implementation std
M <ES> Memory Reset enabled
X ES initialized.
M ThSysUsrCheck: clear T22
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 2328
C patchcomment MSSQL: Transaction inconsistencies HOTNEWS (1067103)
C SQLOLEDB Provider Release:08.10.3959
C Using shared procedure name cache (APPSERVER_DEVDEV_MEM,1320040 bytes,10000 procs) initialized by another process
C Using shared TEMP procedure cache (APPSERVER_DEVDEV_TSP,7040024 bytes,10000 procs) initialized by another process
C Connected to db server : [appserver], dbname: DEV, dbuser: dev
B Connection 0 opened
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 000 000 R/3 000000 ACTIVE NO YES NO 20071119 183031
M db_connect o.k.
I MtxInit: 22 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 22 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 22, WP_CNT = 31
B dbtbxbuf: Buffer TABL (addr: 0BA400C8, size: 6000000, end: 0BFF8E48)
B dbexpbuf: Buffer EIBUF (addr: 0C2100D0, size: 4194304, end: 0C6100D0)
B dbexpbuf: Buffer CUA (addr: 0C6200D0, size: 3072000, end: 0C90E0D0)
M rdisp/reinitialize_code_page -> 0
M rdisp/hold_keeps_time_slice -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M PfReadDBVersion: use compatibility mode for stat-files
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 07D86F10
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0D760098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0D760798
S using messages for server info
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A Attached to PXA (address 28230040, size 154674K)
A abap/pxa = shared
A PXA INITIALIZATION FINISHED
A -PXA--
A
A RFC rfc/dump_client_info not set, use default -1
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC rfc/bc_no_gui_cp_refresh not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M SsfSapSecin: putenv(SECUDIR=D:\usr\sap\DEV\DVEBMGS00\sec): ok
M
M =================================================
M === SSF INITIALIZATION:
M ===...SSF Security Toolkit name SAPSECULIB .
M ===...SSF trace level is 0 .
M ===...SSF library is D:\usr\sap\DEV\SYS\exe\run\sapsecu.dll .
M ===...SSF hash algorithm is SHA1 .
M ===...SSF symmetric encryption algorithm is DES-CBC .
M ===...sucessfully completed.
M =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
B
B Mon Nov 19 18:40:15 2007
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:46D.00]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * = 0x0,
B use_hints = abap->1, dbif->1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
C The IRow interface is supported by this OLEDB provider
M
M Mon Nov 19 18:40:18 2007
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c0000094) [dpnttool.c 390]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000094 (Divide by zero)
App : disp+work.EXE (pid=5400)
When : 11/19/2007 18:40:18.134
Threads : 2
Computer Name : APPSERVER
User Name : SAPServiceDEV
Number of Processors: 4
Processor Type: x86 Family 6 Model 15 Stepping 6
Windows Version : 5.2 Current Build: 3790
Stack Dump for Thread Id 151c
eax=0000a000 ebx=00000000 ecx=00000000 edx=00000000 esi=03f48b54 edi=00000000
eip=10032cab esp=031688b0 ebp=031688dc iopl=0 nv up ei pl nz na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00010206
function : <nosymbols>
10032c92 807d1400 cmp byte ptr [ebp+0x14],0x0 ss:062cfc7a=00
10032c96 7422 jz dsql_db_init+0x30d0a (10032cba)
10032c98 394e08 cmp [esi+0x8],ecx ds:070afef2=????????
10032c9b 751d jnz dsql_db_init+0x30d0a (10032cba)
10032c9d 8d047f lea eax,[edi+edi*2] ds:00000000=????????
10032ca0 c1e003 shl eax,0x3
10032ca3 8bd0 mov edx,eax
10032ca5 8b4518 mov eax,[ebp+0x18] ss:062cfc7a=00000000
10032ca8 2bc2 sub eax,edx
10032caa 99 cdq
FAULT-> 10032cab f7fb idiv ebx
10032cad 0fbfd0 movsx edx,ax
10032cb0 eb0b jmp dsql_db_init+0x30d0d (10032cbd)
10032cb2 6a02 push 0x2
10032cb4 58 pop eax
10032cb5 e9df040000 jmp dsql_db_init+0x311e9 (10033199)
10032cba 6a01 push 0x1
10032cbc 5a pop edx
10032cbd 803dd95a1d1000 ds:101d5ad9=00
cmp byte ptr [EndFastload+0x19644f (101d5ad9)],0x0
10032cc4 7409 jz dsql_db_init+0x30d1f (10032ccf)
10032cc6 833dac591d1006 ds:101d59ac=00000006
cmp dword ptr [EndFastload+0x196322 (101d59ac)],0x6
10032ccd 7416 jz dsql_db_init+0x30d35 (10032ce5)
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
031688dc 1000d5df 00000000 018b76f0 00000000 00000001 dbmssslib!dsql_db_init
03168978 10001cb3 03f41f90 018b8ca8 018b76f0 00000035 dbmssslib!dsql_db_init
031689c4 008f4765 010056b8 00000035 00000001 018b8ca8 dbmssslib!DbSlVersion
031689f4 008f10a9 00000001 00000000 3f26827c 00000000 disp+work!<nosymbols>
03168a74 008f05ff 00000000 3f26827c 00000000 3f2682ec disp+work!<nosymbols>
03168a9c 008a2873 00000000 018b769c 3f2682ec 00000000 disp+work!<nosymbols>
03168b48 0089ef88 00000000 3f26827c 3f2682ec 03168d0c disp+work!<nosymbols>
03168b5c 008a1714 3f261654 00000000 00000000 00000000 disp+work!<nosymbols>
03168d0c 0089d4ec 00000000 3f26827c 3f2682ec 00000000 disp+work!<nosymbols>
03168ea0 0061f5f7 00000000 3f26827c 3f2682ec ffffffff disp+work!<nosymbols>
03168edc 00616212 00000007 03168ef8 0316f130 00000000 disp+work!<nosymbols>
03168f1c 005bf6a0 00000008 29339f2c 00000000 3f2918e0 disp+work!<nosymbols>
0316f140 00629e43 00000000 00000000 0316f170 00000001 disp+work!<nosymbols>
00e5bc44 00000000 49444553 00000000 4f525f25 0000544f disp+work!<nosymbols>
Stack Dump for Thread Id 5f4
eax=00000001 ebx=00000103 ecx=7c829f59 edx=00380000 esi=00000000 edi=00000000
eip=7c8285ec esp=054ffc74 ebp=054ffcb8 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c8285ec c3 ret
7c8285ed 8da42400000000 lea esp,[esp] ss:054ffc74=7c8270fb
7c8285f4 8d642400 lea esp,[esp] ss:08667013=00000000
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
054ffcb8 00c3475c 00000688 00000000 00000000 03e7be00 ntdll!KiFastSystemCallRet
054fff84 77bcb530 00000000 00000000 00000000 03e7be98 disp+work!<nosymbols>
054fffb8 77e64829 03e7be98 00000000 00000000 03e7be98 MSVCRT!endthreadex
054fffec 00000000 77bcb4bc 03e7be98 00000000 00000000 kernel32!GetModuleHandleA
M -
M call clean-up function ...
M in_ThErrHandle: 1
M ThSigHandler: signal (step 4, th_errno 11, action 4)
M
M Info for wp 22
M
M stat = 4
M reqtype = 4
M act_reqtype = 4
M tid = 22
M mode = 0
M len = 24
M rq_id = 139
M rq_source = 1
M rq_info = 8576
M last_tid = 22
M last_mode = 0
M int_checked_resource = 0
M ext_checked_resource = 0
M report = > <
M action = 0
M tab_name = > <
M
M Modeinfo for User T22/M0
M
M tm state = 2
M uid = 23
M term type = 0x0
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >DDIC <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M blockSoftCanel = NO
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M th_errno = 11
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 1
M roll state = 4
M abap state = 4
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = -1
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = NULL
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server appserver_DEV_00 on host appserver (wp 22)
M * ERROR ThSigHandler: signal
M *
M * TIME Mon Nov 19 18:40:18 2007
M * RELEASE 46D
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 8628
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALL_HOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M Entering ThSetStatError
M *** WARNING => sql break failed (-1)
M ThErrHandle: don't try rollback again
M ThErrHandle: call ThrCoreInfo
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
C HandleOledbError [RpcExec,line 22204]: Error/Message: (err 8144, sev 0), Procedure or function ##Y8APPSERVEDEV00000054000000000014183031 has too many arguments specified.
C RpcExec failed. HR 80040e14 DBSL retcode 99. proc: [##Y8APPSERVEDEV00000054000000000014183031]
C HandleOledbError [RpcExec,line 22204]: Error/Message: (err 8144, sev 0), Procedure or function ##Y8APPSERVEDEV00000054000000000014183031 has too many arguments specified.
C RpcExec failed. HR 80040e14 DBSL retcode 99. proc: [##Y8APPSERVEDEV00000054000000000014183031]
C retry with SQL statement string
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end RX_RETURN
M ThIErrHandle: Entering ThErrHdlUser
M ThErrHdlUser: set th_errno (11)
M ThErrHdlUser: save context
B Disconnecting from ALL connections:
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 022 000 R/3 000000 ACTIVE YES YES NO 20071119 183031
B Disconnected from connection 0
B statistics db_con_commit (com_total=5, com_forced=1, com_tx=1)
B statistics db_con_rollback (roll_total=0, roll_forced=0, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc22 5400) [dpnttool.c 310]
M return from clean-up function ...
trc file: "dev_w22", trc level: 1, release: "46D"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Mon Nov 19 18:40:34 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' ...
B Library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' loaded
B Version of library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' is "46D.00", patchlevel (0.2328)
B New connection 0 created
M relno 4640
M patchlevel 0
M patchno 2352
M intno 0
M pid 432
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc22 432) [dpxxdisp.c 976]
I MtxInit: -2 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 22 initializing ....
X Using implementation std
M <ES> Memory Reset enabled
X ES initialized.
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 2328
C patchcomment MSSQL: Transaction inconsistencies HOTNEWS (1067103)
C SQLOLEDB Provider Release:08.10.3959
C Using shared procedure name cache (APPSERVER_DEVDEV_MEM,1320040 bytes,10000 procs) initialized by another process
C Using shared TEMP procedure cache (APPSERVER_DEVDEV_TSP,7040024 bytes,10000 procs) initialized by another process
C Connected to db server : [appserver], dbname: DEV, dbuser: dev
B Connection 0 opened
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 000 000 R/3 000000 ACTIVE NO YES NO 20071119 184034
M db_connect o.k.
I MtxInit: 22 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 22 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 22, WP_CNT = 31
B dbtbxbuf: Buffer TABL (addr: 0BA400C8, size: 6000000, end: 0BFF8E48)
B dbexpbuf: Buffer EIBUF (addr: 0C2100D0, size: 4194304, end: 0C6100D0)
B dbexpbuf: Buffer CUA (addr: 0C6200D0, size: 3072000, end: 0C90E0D0)
M rdisp/reinitialize_code_page -> 0
M rdisp/hold_keeps_time_slice -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M PfReadDBVersion: use compatibility mode for stat-files
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 07D86BF0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0D760098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0D760798
S using messages for server info
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A Attached to PXA (address 28230040, size 154674K)
A abap/pxa = shared
A PXA INITIALIZATION FINISHED
A -PXA--
A
A RFC rfc/dump_client_info not set, use default -1
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC rfc/bc_no_gui_cp_refresh not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M SsfSapSecin: putenv(SECUDIR=D:\usr\sap\DEV\DVEBMGS00\sec): ok
M
M =================================================
M === SSF INITIALIZATION:
M ===...SSF Security Toolkit name SAPSECULIB .
M ===...SSF trace level is 0 .
M ===...SSF library is D:\usr\sap\DEV\SYS\exe\run\sapsecu.dll .
M ===...SSF hash algorithm is SHA1 .
M ===...SSF symmetric encryption algorithm is DES-CBC .
M ===...sucessfully completed.
M =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M ThCheckPrevUser: clean previous user T22/U23/M0/I2
M
M Modeinfo for User T22/M0
M
M tm state = 2
M uid = 23
M term type = 0x0
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >DDIC <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M blockSoftCanel = NO
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M th_errno = 11
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 1
M roll state = 3
M abap state = 3
M em state = 2
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = -1
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = NULL
M
M ThCheckPrevUser: reset spa state for user T22/U23/M0
M LOCK WP ca_blk 216
M LOCK APPC ca_blk 72
M set task type ZTTABTC
M ThCleanPrevUser: clean U23 T22 M0 I2 clean state DP_DEFAULT_CLEANING from previous wp
M ThCleanPrevUser: saved MODE_REC = 40
M PfStatDisconnect: disconnect statistics
M ThCheckEmState: check ATTACH for em hdl 1
M ThCheckEmState: call EmContextAttach (em_hdl=1)
M ThIAMDel: delete tid/mode 22/0 (th_errno 23, release 1)
M ThTSCancel: set T22 M0 in status MODE_CANCEL
M ThIDeleteMode (22, 0, 3, ><, 0, 255, TRUE)
M ThIDeleteMode: no modes found ..
M no sub modes
M ThSUsrDel: delete system user
M ThSUsrDel: clean batch after error (23)
C The IRow interface is supported by this OLEDB provider
M ThScheduler: server name: appserver_DEV_00
M ThISendMsg: send message (5) to server (wp) with name >appserver_DEV_00 <
M ThISndName: send to name: >appserver_DEV_00 <
M ThISend: (tm/user/type = 22/DDIC /0x2000, mode_deleted=0)
M MSG_NAME
M ThRqOutCheck: o.k.
M abap strategy ROLL / O.K.
M ThNewWpStat: new state of T22/M0 = 0xc2
M ThISend: new wp stat: 0x0
M Adresse Offset Message by name (one way)
M -
M 0639A0C0 000000 00000000 05000000 255f4556 454e545f |........%%_EVENT_|
M 0639A0D0 000016 53434845 44554c45 52002020 20202020 |SCHEDULER. |
M -
M ThMkReq: send output to canceled mode
M make DISP owner of wp_ca_blk 216
M put request into queue (reqtype 0, prio LOW, rq_id 158)
M -OUT- sender_id WORK_PROCESS tid 22 wp_ca_blk 216 wp_id 22
M -OUT- action SEND_MSG_ONEWAY uid 23 appc_ca_blk -1 type NOWP
M -OUT- new_stat NO_CHANGE mode 0 len 268 rq_id 158
M -OUT- forward DIA
M -OUT- req_info CANCELMODE MSG_WITH_REQ_BUF MSG_WITH_OH
M NiPHostToAddr: read hostaddr 127.0.0.1 from operating system
M NiIHostToAddr: hostname localhost = addr 127.0.0.1
M NiPServToNo: read servno 3200 from operating system
M NiIServToNo: servicename sapdp00 = port 0C.80/3200
M NiCreateHandle: state nihandle-socket 1-1024 NI_INITIAL
M NiIDgSend: init datagram send_handle 1-1024
M CPU byte order: little endian, reverse network, low val .. high val
M NiIDgSend: send dgram to: host 127.0.0.1, port 0C.80/3200, fam 2 (low adr..high adr)
M LOCK WP ca_blk 217
M ThResFree: free resources of U23 M0 I2 (normal mode, complete free) at level 3, db_action=TH_DB_NO_ACTION
M ThResFree: reset spa state for user T22/U23/M0
M ThCallHooks: call hook >SpoolHandleHook< for event SOS_HOOK_BEFORE_SESSION_CANCEL
M PfStatDisconnect: disconnect statistics
M ThDealComm: T22/U23/M0 has no cpic conns
M ***LOG R47=> ThResFree, delete (001023) [thxxmode.c 1099]
M ThGetEnqInfo: no enq info found
M ThVBIRollBack: initialize TH-hooks
M SosRegisterHook: add hook >ThVBICmRbHook< for event AFTER_COMMIT
M SosRegisterHook: add hook >ThVBICmRbHook< for event AFTER_ROLLBACK
M ThRmLocQueue: no async request found
M ThInvalidateRfcCliId: invalidate RfcCliId at 5DA68C48
M ThRmFree: cleanup resources for T22 M0
M RmCleanUpResources2: hdr/tbl/ext_tbl = 04037058/00000000/0
M RmCleanUpResources2: no resources registered
M ThRmFree: reset eg state of T22 M0
M ThRmFree cleanup resources for T22
M RmCleanUpResources2: hdr/tbl/ext_tbl = 04037BB8/5DA68D20/1
M RmCleanUpResources2: call resource handler 0047A981 for key/entry 3/0
M ThFreeRollMemory: release eg adr 5DA68C48 for T22
M RmInitResourceTblEntry: free resource description at 5DA693A8 (ext_tbl=1)
M ThFreeRollMemory: release eg adr 5DA693A8 for T22
M RmIFreeTable: free resource table at 5DA68D20 (ext_tbl=1)
M ThFreeRollMemory: release eg adr 5DA68D20 for T22
M ThRmFree: reset eg state of T22
M ThEmFree: call EmContextDelete (em_hdl=1)
M ThResFree: save spa pointer 7FDCE7E0 and install dummy spa
M ThCheckComOrRb (event=1, full_commit=1)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M ThCheckComOrRb (event=3, full_commit=1)
M ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT
M ThVBICmRbHook: called for commit
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M ThISend: (tm/user/type = 22/SAPSYS /0x41, mode_deleted=1)
M TASK_SWITCH
M DISP
M ThRqOutCheck: o.k.
M ThISend: allowed rq_type of T22/M0 = 0
M abap strategy ROLL / O.K.
M ThNewWpStat: new MODE_REC = 40
M ThNewWpStat: new state of T22/M0 = 0xc1
M ThISend: new wp stat: 0x2
M ThMkReq: send output to canceled mode
M ThISend: complete stat record
M make DISP owner of wp_ca_blk 217
M put request into queue (reqtype 0, prio LOW, rq_id 159)
M -OUT- sender_id WORK_PROCESS tid 22 wp_ca_blk 217 wp_id 22
M -OUT- action SEND_TO_DP uid 23 appc_ca_blk -1 type NOWP
M -OUT- new_stat WP_WAIT mode 0 len 8 rq_id 159
M -OUT- req_info CANCELMODE
M NiIDgSend: send dgram to: host 127.0.0.1, port 0C.80/3200, fam 2 (low adr..high adr)
M REL APPC ca_blk 72
M ThISend: th_wp_waits_for_rq = TH_WP_WAITS_FOR_RQPfClearAllRec: clear statistic area
M PfStatDisconnect: disconnect statistics
M ThSysUsrCheck(1,1): check system user T22/U23/M0
M ThSysUsrCheck: clear T22
M DpITmSlotClear: clear slot 22
M DpListRemove: elem 22 not in tmadm_free_list
M DpListInsert: elem 22 already in tmadm_inuse_list
M rdisp/wp_auto_restart = 0
M rdisp/wp_abap_restart = 0
M ThSetThToolParam : restartable_wp[0] = FALSE
M ThSetThToolParam : restartable_wp[1] = TRUE
M ThSetThToolParam : restartable_wp[2] = TRUE
M ThSetThToolParam : restartable_wp[3] = FALSE
M ThSetThToolParam : restartable_wp[4] = TRUE
M ThSetThToolParam : restartable_wp[5] = TRUE
M ThSetThToolParam : restartable_wp[6] = TRUE
M ThCallHooks: call hook >HttpResetPtr< for event BEFORE_TASK_SWITCH
M TskhLoop: switch back to normal tracel level 1
B
B Mon Nov 19 20:15:39 2007
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:46D.00]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * = 0x0,
B use_hints = abap->1, dbif->1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c0000094) [dpnttool.c 390]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000094 (Divide by zero)
App : disp+work.EXE (pid=432)
When : 11/19/2007 20:15:39.822
Threads : 2
Computer Name : APPSERVER
User Name : SAPServiceDEV
Number of Processors: 4
Processor Type: x86 Family 6 Model 15 Stepping 6
Windows Version : 5.2 Current Build: 3790
Stack Dump for Thread Id 10c8
eax=0000a000 ebx=00000000 ecx=00000000 edx=00000000 esi=03f48b44 edi=00000000
eip=10032cab esp=031688b0 ebp=031688dc iopl=0 nv up ei pl nz na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00010206
function : <nosymbols>
10032c92 807d1400 cmp byte ptr [ebp+0x14],0x0 ss:062cfc7a=00
10032c96 7422 jz dsql_db_init+0x30d0a (10032cba)
10032c98 394e08 cmp [esi+0x8],ecx ds:070afee2=????????
10032c9b 751d jnz dsql_db_init+0x30d0a (10032cba)
10032c9d 8d047f lea eax,[edi+edi*2] ds:00000000=????????
10032ca0 c1e003 shl eax,0x3
10032ca3 8bd0 mov edx,eax
10032ca5 8b4518 mov eax,[ebp+0x18] ss:062cfc7a=00000000
10032ca8 2bc2 sub eax,edx
10032caa 99 cdq
FAULT-> 10032cab f7fb idiv ebx
10032cad 0fbfd0 movsx edx,ax
10032cb0 eb0b jmp dsql_db_init+0x30d0d (10032cbd)
10032cb2 6a02 push 0x2
10032cb4 58 pop eax
10032cb5 e9df040000 jmp dsql_db_init+0x311e9 (10033199)
10032cba 6a01 push 0x1
10032cbc 5a pop edx
10032cbd 803dd95a1d1000 ds:101d5ad9=00
cmp byte ptr [EndFastload+0x19644f (101d5ad9)],0x0
10032cc4 7409 jz dsql_db_init+0x30d1f (10032ccf)
10032cc6 833dac591d1006 ds:101d59ac=00000006
cmp dword ptr [EndFastload+0x196322 (101d59ac)],0x6
10032ccd 7416 jz dsql_db_init+0x30d35 (10032ce5)
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
031688dc 1000d5df 00000000 018b76f0 00000000 00000001 dbmssslib!dsql_db_init
03168978 10001cb3 03f41f80 018b8ca8 018b76f0 00000035 dbmssslib!dsql_db_init
031689c4 008f4765 010056b8 00000035 00000001 018b8ca8 dbmssslib!DbSlVersion
031689f4 008f10a9 00000001 00000000 3f26827c 00000000 disp+work!<nosymbols>
03168a74 008f05ff 00000000 3f26827c 00000000 3f2682ec disp+work!<nosymbols>
03168a9c 008a2873 00000000 018b769c 3f2682ec 00000000 disp+work!<nosymbols>
03168b48 0089ef88 00000000 3f26827c 3f2682ec 03168d0c disp+work!<nosymbols>
03168b5c 008a1714 3f261654 00000000 00000000 00000000 disp+work!<nosymbols>
03168d0c 0089d4ec 00000000 3f26827c 3f2682ec 00000000 disp+work!<nosymbols>
03168ea0 0061f5f7 00000000 3f26827c 3f2682ec ffffffff disp+work!<nosymbols>
03168edc 00616212 00000007 03168ef8 0316f130 00000000 disp+work!<nosymbols>
03168f1c 005bf6a0 00000008 29339f2c 00000000 3f2918e0 disp+work!<nosymbols>
0316f140 00629e43 00000000 00000000 0316f170 00000001 disp+work!<nosymbols>
00e5bc44 00000000 49444553 00000000 4f525f25 0000544f disp+work!<nosymbols>
Stack Dump for Thread Id 10c4
eax=00000001 ebx=00000103 ecx=7c829f59 edx=00380000 esi=00000000 edi=00000000
eip=7c8285ec esp=054ffc74 ebp=054ffcb8 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c8285ec c3 ret
7c8285ed 8da42400000000 lea esp,[esp] ss:054ffc74=7c8270fb
7c8285f4 8d642400 lea esp,[esp] ss:08667013=00000000
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
054ffcb8 00c3475c 00000688 00000000 00000000 03e7bdf0 ntdll!KiFastSystemCallRet
054fff84 77bcb530 00000000 00000000 00000000 03e7be88 disp+work!<nosymbols>
054fffb8 77e64829 03e7be88 00000000 00000000 03e7be88 MSVCRT!endthreadex
054fffec 00000000 77bcb4bc 03e7be88 00000000 00000000 kernel32!GetModuleHandleA
M -
M call clean-up function ...
M in_ThErrHandle: 1
M ThSigHandler: signal (step 4, th_errno 11, action 4)
M
M Info for wp 22
M
M stat = 4
M reqtype = 4
M act_reqtype = 4
M tid = 22
M mode = 0
M len = 24
M rq_id = 1131
M rq_source = 1
M rq_info = 8576
M last_tid = 22
M last_mode = 0
M int_checked_resource = 0
M ext_checked_resource = 0
M report = > <
M action = 0
M tab_name = > <
M
M Modeinfo for User T22/M0
M
M tm state = 2
M uid = 23
M term type = 0x0
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >DDIC <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M blockSoftCanel = NO
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M th_errno = 11
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 1
M roll state = 4
M abap state = 4
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = -1
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = NULL
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server appserver_DEV_00 on host appserver (wp 22)
M * ERROR ThSigHandler: signal
M *
M * TIME Mon Nov 19 20:15:39 2007
M * RELEASE 46D
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 8628
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALL_HOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M Entering ThSetStatError
M *** WARNING => sql break failed (-1)
M ThErrHandle: don't try rollback again
M ThErrHandle: call ThrCoreInfo
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
C HandleOledbError [RpcExec,line 22204]: Error/Message: (err 8144, sev 0), Procedure or function ##Y8APPSERVEDEV00000054000000000014183031 has too many arguments specified.
C RpcExec failed. HR 80040e14 DBSL retcode 99. proc: [##Y8APPSERVEDEV00000054000000000014183031]
C retry with SQL statement string
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end RX_RETURN
M ThIErrHandle: Entering ThErrHdlUser
M ThErrHdlUser: set th_errno (11)
M ThErrHdlUser: save context
B Disconnecting from ALL connections:
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 022 000 R/3 000000 ACTIVE YES YES NO 20071119 184034
B Disconnected from connection 0
B statistics db_con_commit (com_total=6, com_forced=2, com_tx=2)
B statistics db_con_rollback (roll_total=0, roll_forced=0, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc22 432) [dpnttool.c 310]
M return from clean-up function ...
trc file: "dev_w22", trc level: 1, release: "46D"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Mon Nov 19 20:15:54 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' ...
B Library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' loaded
B Version of library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' is "46D.00", patchlevel (0.2328)
B New connection 0 created
M relno 4640
M patchlevel 0
M patchno 2352
M intno 0
M pid 4492
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc22 4492) [dpxxdisp.c 976]
I MtxInit: -2 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 22 initializing ....
X Using implementation std
M <ES> Memory Reset enabled
X ES initialized.
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 2328
C patchcomment MSSQL: Transaction inconsistencies HOTNEWS (1067103)
C SQLOLEDB Provider Release:08.10.3959
C Using shared procedure name cache (APPSERVER_DEVDEV_MEM,1320040 bytes,10000 procs) initialized by another process
C Using shared TEMP procedure cache (APPSERVER_DEVDEV_TSP,7040024 bytes,10000 procs) initialized by another process
C Connected to db server : [appserver], dbname: DEV, dbuser: dev
B Connection 0 opened
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 000 000 R/3 000000 ACTIVE NO YES NO 20071119 201554
M db_connect o.k.
I MtxInit: 22 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 22 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 22, WP_CNT = 31
B dbtbxbuf: Buffer TABL (addr: 0BA400C8, size: 6000000, end: 0BFF8E48)
B dbexpbuf: Buffer EIBUF (addr: 0C2100D0, size: 4194304, end: 0C6100D0)
B dbexpbuf: Buffer CUA (addr: 0C6200D0, size: 3072000, end: 0C90E0D0)
M rdisp/reinitialize_code_page -> 0
M rdisp/hold_keeps_time_slice -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M PfReadDBVersion: use compatibility mode for stat-files
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 07D86BF0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0D760098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0D760798
S using messages for server info
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A Attached to PXA (address 28230040, size 154674K)
A abap/pxa = shared
A PXA INITIALIZATION FINISHED
A -PXA--
A
A RFC rfc/dump_client_info not set, use default -1
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC rfc/bc_no_gui_cp_refresh not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M SsfSapSecin: putenv(SECUDIR=D:\usr\sap\DEV\DVEBMGS00\sec): ok
M
M =================================================
M === SSF INITIALIZATION:
M ===...SSF Security Toolkit name SAPSECULIB .
M ===...SSF trace level is 0 .
M ===...SSF library is D:\usr\sap\DEV\SYS\exe\run\sapsecu.dll .
M ===...SSF hash algorithm is SHA1 .
M ===...SSF symmetric encryption algorithm is DES-CBC .
M ===...sucessfully completed.
M =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M ThCheckPrevUser: clean previous user T22/U23/M0/I2
M
M Modeinfo for User T22/M0
M
M tm state = 2
M uid = 23
M term type = 0x0
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >DDIC <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M blockSoftCanel = NO
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M th_errno = 11
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 1
M roll state = 3
M abap state = 3
M em state = 2
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = -1
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = NULL
M
M ThCheckPrevUser: reset spa state for user T22/U23/M0
M LOCK WP ca_blk 216
M LOCK APPC ca_blk 72
M set task type ZTTABTC
M ThCleanPrevUser: clean U23 T22 M0 I2 clean state DP_DEFAULT_CLEANING from previous wp
M ThCleanPrevUser: saved MODE_REC = 40
M PfStatDisconnect: disconnect statistics
M ThCheckEmState: check ATTACH for em hdl 1
M ThCheckEmState: call EmContextAttach (em_hdl=1)
M ThIAMDel: delete tid/mode 22/0 (th_errno 23, release 1)
M ThTSCancel: set T22 M0 in status MODE_CANCEL
M ThIDeleteMode (22, 0, 3, ><, 0, 255, TRUE)
M ThIDeleteMode: no modes found ..
M no sub modes
M ThSUsrDel: delete system user
M ThSUsrDel: clean batch after error (23)
C The IRow interface is supported by this OLEDB provider
M ThScheduler: server name: appserver_DEV_00
M ThISendMsg: send message (5) to server (wp) with name >appserver_DEV_00 <
M ThISndName: send to name: >appserver_DEV_00 <
M ThISend: (tm/user/type = 22/DDIC /0x2000, mode_deleted=0)
M MSG_NAME
M ThRqOutCheck: o.k.
M abap strategy ROLL / O.K.
M ThNewWpStat: new state of T22/M0 = 0xc2
M ThISend: new wp stat: 0x0
M Adresse Offset Message by name (one way)
M -
M 0639A0C0 000000 00000000 05000000 255f4556 454e545f |........%%_EVENT_|
M 0639A0D0 000016 53434845 44554c45 52002020 20202020 |SCHEDULER. |
M -
M ThMkReq: send output to canceled mode
M make DISP owner of wp_ca_blk 216
M put request into queue (reqtype 0, prio LOW, rq_id 1165)
M -OUT- sender_id WORK_PROCESS tid 22 wp_ca_blk 216 wp_id 22
M -OUT- action SEND_MSG_ONEWAY uid 23 appc_ca_blk -1 type NOWP
M -OUT- new_stat NO_CHANGE mode 0 len 268 rq_id 1165
M -OUT- forward DIA
M -OUT- req_info CANCELMODE MSG_WITH_REQ_BUF MSG_WITH_OH
M NiPHostToAddr: read hostaddr 127.0.0.1 from operating system
M NiIHostToAddr: hostname localhost = addr 127.0.0.1
M NiPServToNo: read servno 3200 from operating system
M NiIServToNo: servicename sapdp00 = port 0C.80/3200
M NiCreateHandle: state nihandle-socket 1-1024 NI_INITIAL
M NiIDgSend: init datagram send_handle 1-1024
M CPU byte order: little endian, reverse network, low val .. high val
M NiIDgSend: send dgram to: host 127.0.0.1, port 0C.80/3200, fam 2 (low adr..high adr)
M LOCK WP ca_blk 217
M ThResFree: free resources of U23 M0 I2 (normal mode, complete free) at level 3, db_action=TH_DB_NO_ACTION
M ThResFree: reset spa state for user T22/U23/M0
M ThCallHooks: call hook >SpoolHandleHook< for event SOS_HOOK_BEFORE_SESSION_CANCEL
M PfStatDisconnect: disconnect statistics
M ThDealComm: T22/U23/M0 has no cpic conns
M ***LOG R47=> ThResFree, delete (001023) [thxxmode.c 1099]
M ThGetEnqInfo: no enq info found
M ThVBIRollBack: initialize TH-hooks
M SosRegisterHook: add hook >ThVBICmRbHook< for event AFTER_COMMIT
M SosRegisterHook: add hook >ThVBICmRbHook< for event AFTER_ROLLBACK
M ThRmLocQueue: no async request found
M ThInvalidateRfcCliId: invalidate RfcCliId at 5DA68C48
M ThRmFree: cleanup resources for T22 M0
M RmCleanUpResources2: hdr/tbl/ext_tbl = 04037058/00000000/0
M RmCleanUpResources2: no resources registered
M ThRmFree: reset eg state of T22 M0
M ThRmFree cleanup resources for T22
M RmCleanUpResources2: hdr/tbl/ext_tbl = 04037BB8/5DA68D20/1
M RmCleanUpResources2: call resource handler 0047A981 for key/entry 3/0
M ThFreeRollMemory: release eg adr 5DA68C48 for T22
M RmInitResourceTblEntry: free resource description at 5DA693A8 (ext_tbl=1)
M ThFreeRollMemory: release eg adr 5DA693A8 for T22
M RmIFreeTable: free resource table at 5DA68D20 (ext_tbl=1)
M ThFreeRollMemory: release eg adr 5DA68D20 for T22
M ThRmFree: reset eg state of T22
M ThEmFree: call EmContextDelete (em_hdl=1)
M ThResFree: save spa pointer 7FDCE7E0 and install dummy spa
M ThCheckComOrRb (event=1, full_commit=1)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M ThCheckComOrRb (event=3, full_commit=1)
M ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT
M ThVBICmRbHook: called for commit
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M ThISend: (tm/user/type = 22/SAPSYS /0x41, mode_deleted=1)
M TASK_SWITCH
M DISP
M ThRqOutCheck: o.k.
M ThISend: allowed rq_type of T22/M0 = 0
M abap strategy ROLL / O.K.
M ThNewWpStat: new MODE_REC = 40
M ThNewWpStat: new state of T22/M0 = 0xc1
M ThISend: new wp stat: 0x2
M ThMkReq: send output to canceled mode
M ThISend: complete stat record
M make DISP owner of wp_ca_blk 217
M put request into queue (reqtype 0, prio LOW, rq_id 1166)
M -OUT- sender_id WORK_PROCESS tid 22 wp_ca_blk 217 wp_id 22
M -OUT- action SEND_TO_DP uid 23 appc_ca_blk -1 type NOWP
M -OUT- new_stat WP_WAIT mode 0 len 8 rq_id 1166
M -OUT- req_info CANCELMODE
M NiIDgSend: send dgram to: host 127.0.0.1, port 0C.80/3200, fam 2 (low adr..high adr)
M -
Lenovo Community Participation Rules
Objectives of Lenovo Discussion Forums:
These communities have been created to provide a high quality atmosphere in which users of Lenovo products and services may share experiences and expertise. While members from Lenovo may participate at intervals to engage in the discussions and offer advice and suggestions, this forum is not designed as a dedicated and staffed support channel. This is an informal and public forum, and Lenovo does not guarantee the accuracy of information and advice posted here -- see important Warranty information below.
RULES OF CONDUCT -- YOUR RESPONSIBILITIES
Lenovo reserves the right to remove inappropriate language and postings, such as those examples listed below, from the discussion forums. In such instances, the user will be warned and may be banned from future participation
Prohibitions
No posts, forum IDs or email addresses shall contain profanity (implied or otherwise), or hate language targeting race / ethnicity, religion, gender, nationality, or political beliefs.
Post should avoid these topics. Posts violating these rules will be moderated, and the user warned. Repeat occurrences could result in banning.
No pornography, in the form of written words, expressions, posted images, or links to external material will be tolerated.
No personal threats will be tolerated against forum members, Lenovo employees, or company affiliates.
No personal attacks.
It is fair to state disagreement with facts or conclusions that another member has posted, but dissent must be expressed in an objective, and reasoned manner. Treat others with the respect you wish to receive. Remember that the community is here to share collective experiences and wisdom, with the goal of all members enjoying greater success with their Lenovo products. Consider whether your comments serve to advance the discussion in a positive direction.
No Trolling or deliberate disruption of discussion . Inflammatory post or thread titles are unacceptable and may be moderated.
Inflammatory, or unnecessarily argumentative postings will be considered trolling. Extended debate with moderators or admins over their decisions with regard to moderation of posts is considered trolling. Do not subvert threads. No vendetta posts, or online campaigning. It is acceptable to state concern for how a particular Lenovo policy, performance, or procedure does or does not meet the expectation of a particular member, but it is not acceptable to use this forum in an attempt to broadly organize or incite members en mass, to cancel orders, return systems, undertake legal action or otherwise disrupt the normal business processes of Lenovo.
No posting of private information.
Privacy - Lenovo respects the privacy of each member - please find the privacy link in the footer on each page of the forum. As such, we request that participants respect the privacy of all community members and of Lenovo employees that they speak with on the phone, or correspond with via email. Posts revealing items such as full names, email, or direct phone numbers of others without their express consent is prohibited.
No commercial solicitation, other than advertisements placed by Lenovo.
This is not intended as an online shopping or trading forum. Members may not post inventories of items, or list items for sale on a routine basis. "Wanted" posts (e.g., a member seeking a 701c system) are permitted on a one-off basis. Individuals may also post single Lenovo products, or directly related accessory items as "for sale" in the general discussion area. Posts for non Lenovo related products are not acceptable (so no cars, boats,planes, tennis rackets,MP3 players, for example). Discretion of forum administrators to remove an item is reserved in all instances.
No solicitation for, nor exchange of information that will aid or enable unethical, illegal, immoral or unsafe activities.
For example, no posts concerning exchange of passwords, credit or banking information, warranty entitlement information for purpose of re-entitling out of warranty products. No posts shall include instructions or directions intended to subvert security measures, including passwords, locking mechanisms, fingerprint scans, etc, or to subvert safety measures. Nor shall any posts provide descriptions to the location of, nor direct links to content related to these topics.
Members are restricted to a single online persona
Members may not register under multiple IDs, or utilize multiple email addresses within the Lenovo communities. This rule applies to Lenovo blogs and the forum. Posting under multiple IDs can be a deceptive practice and could create false impressions. The consistent use of a single ID / Persona whether posting response comments on Lenovo Blogs, or in active forum participation enhances the reputation and recognition of the individual community member.
Do not embed large photos (above 100K) or cut and paste large areas (use of quote) unnecessarily as these behaviors degrade the performance of the forum and detract from the overall usability and experience of others. Instead, host photos externally and link to them as needed within your posts. If you must post to the forum, post in the photos area, remembering to title the thread photo thread appropriately when you post them to. Try to limit each photo to 100K or less in size, and provide a warning of "large attachments" if you are posting lots of pictures or if you had to go above 100K.
You can check out this article About Posting Pictures In The Forums for more useful details.
Do not attempt to subvert or corrupt the software of the forum
- members attempting to do so will be banned.
No posts or signatures with intent to promote or advertise
Any way of personal blogs/ websites/ pages/ affiliated websites/ resources are not allowed.* Links may be removed at Lenovo's discretion. Repeat offenders may face suspensions/ banning of accounts
a) External Links
External links to other sites are permitted when they are relevant to the discussion and the information included is not available or cannot be found in the Lenovo forums or websites. Users are not permitted to repeatedly link or post threads with intention to link to personal blogs, websites or other personal resources in the web as this will be considered as advertising or board spamming. The links / posts will be removed at Lenovo's discretion. External links may not link to any site containing subjects listed in the Prohibitions section of these guidelines. Repeat offences will result in forum membership being revoked.
b) Signatures
Members are encouraged to include their system details in their signature as this will inform and assist others who may be offering advice. No pictures are permitted in signatures. A single discreet link to a personal website or other online resource is permitted in the signature line. However, the link must not be directed to any site containing subjects listed in the Prohibitions section of these guidelines. Members are not permitted to refer to the signature link in the body of their post text as this will be considered as advertising or board spamming.
Guidelines and Recommendations
Before creating a new thread, search the appropriate section of the forum first for any existing and related threads. It may be more constructive to all, to advance the knowledge of an existing thread than to create a possibly redundant one. If you find something similar, but believe your topic is unique enough to create a new thread, then do create the new thread choosing your title carefully (see below). Provide some comments as to the existence of the related thread(s) you found and link to them. This will help other users and the moderators to provide the most valuable responses possible.
Post to the correct area - Post new threads in the sections for the particular family of systems, Thinkpads, Thinkcentres, Lenovo 3000, etc. Choose the proper series of systems - T, X, G, H, etc. Moderators will move threads to appropriate sections.
Title threads appropriately. The title of a thread should accurately reflect the subject of the discussion and be as technically specific as possible. Avoid inflammatory or emotional statements that do not aid the development of the conversation. Thread titles are indexed not only for search functions within the forum, but often externally in Google, Yahoo, etc. Proper thread titles will aid the active members of the Lenovo community, as well as non-members who may be searching more broadly. Example of a good thread title: T Thinkpad Blue Screens after suspend . Example of a bad thread title: Stupid computer locks up - worthless piece of junk. Moderators may alter thread titles to be more meaningful if less than appropriate titles are chosen.
Use pictures to aid understanding and comprehension when appropriate. Screen captures of settings, pull down menus, or error messages can be very helpful in understanding an issue and helping to resolve it. Digital pictures of systems and their environments can also be helpful from time to time. Host pictures externaly, or post to photos area. Limit size to 100K or less. 10M pixel cameras are cool but the resulting file sizes are not. You can check out this article About Posting Pictures In The Forums for more useful details.
Look for ways to advance the richness of the forum. Share awareness of this forum with other users of Lenovo products that you know. Participate in special interest areas. Look for opportunities to mentor junior members - help them along the path to greater knowledge, share shortcuts. Do link to external resources and documents. Members that distinguish themselves by consistently providing quality answers, that advance the collective understanding, and resolve specific problems will attain higher rankings and privileges.
Please restrict off topic discussions to the general area.
There are thousands of online communities dedicated to a wide variety of topics from automobiles, to astronomy, folk arts to fly fishing. This community is dedicated to the Lenovo family of products, services, and the community members who own, use, and benefit from them.
Country Location
- Members should denote their country location in their personal profile. Location is important when offering advice, as sales, service, and product options may not be consistent country to country. Note that community members from other countries may not all share the same understanding of metaphors, social references, or slang expressions. Posts authored with this in mind may be more easily understood by all. This field is a requirement during registration.
DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY
Lenovo assumes no responsibility regarding the accuracy of the information posted on these pages, whether posted by third parties or by Lenovo representatives, and use of such information is at the recipient's own risk. While Lenovo provides no warranties or guarantees that any reported problems may be resolved with the use of any information available on these pages. By furnishing information, Lenovo does not grant any licenses to any copyrights, patents or any other intellectual property rights.
You agree to indemnify and hold Lenovo and its affiliates and subsidiaries, and each of their employees, officers and agents harmless from any claim, including attorneys' fees, made by any third party arising out of content you submit, post, transmit or make available through these pages, your use of these pages, your violation of these Rules or the website Terms of Use and Privacy Policy, or your violation of any other third party's rights. This disclaimer and limitation of liability is in addition to any additional statements contained in the general Terms of Use posted on Lenovo's websites.
Message Edited by Mark_Lenovo on 11-27-2007 03:43 AM
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное СообществоHi
It is unfortunate that you have a broken backspce key . I would request you to visit the nearest service station to have the keyboard fixed So please visit the below mentioned web link and locate the nearest service centre where you will be assisted by our service representatives.
http://consumersupport.lenovo.com/ph/en/Maintenancestation/APR_Maintenancestation.aspx
Hope This Helps
Cheers!!! -
Install SSMS on SQL Server 2008 Express
Hi,I'm trying to install SSMS on my Windows 2008 Server running SQL Server 2008 Express.
I get the following error when I try to install it:
How do I get around this? I thought I had at least SP1 installed but don't know how to check.Hello,
The easiest way is to install SSMS with SP3, you can get it here:
Microsoft SQL Server Management Studio Express Service Pack 3
Otherwise: It's just a warning, go on with Installation and apply SP1 (or better SP3) afterwards:
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Photoshop CC 2014 Windows crashes on startup if plugins installed
Common commercial plug-ins (e.g. Shine-off, Portrait Professional) will not automatically install into this Windows version of Photoshop.
Nik filters will install manually, the installer does not recognize this version of PS, but the program crashes shortly after launch if the plug-ins are installed.
No plug-ins, program runs.
I also have PS CC 2014 installed in OSX Maverick and the Mac plugins, specifically Nik filters, will install and work.
I do not see any entries for PS CC 2014 in the Program files/x86 directory as there are for every other windows version of PS suggesting a programming change.
I hope this is simply more buggy Adobe programming and not a deliberate attempt to sabotage Windows users and the plug-in market. If PS CC 2014 for Windows is not compatible with existing plug-ins its kind of useless/worthless if your workflow includes those plugins.I do not agree that obsoleting all on my expensive plug-ins is a plug-in author's issue; some of these authors are no longer around / listed - it's an unannounced and not warned about break in backwards compatibility!
So, how do we restore operation for plug-ins in "legacy mode"? -
After 2.1 update still getting dropped calls
After 2.1 update I have dropped at least 15 Phone calls , the signal strength is usually on 5 bars 3g , the calls drop without warning (doesnt break up or destort voice), It also seems if I look at email while on a call it drops the call about 20 seconds later, another odd thing is the improved reception at my desk at work , used to get 1 bar on EDGE or no service , after 2.1 update I got 5 bars on 3g and the internet was pretty fast in the same spot but only during the morning time , I went back into the office about an hour later the bars dropped to 1 bar on EDGE/no service and the internet wouldnt even work , and now today when talking with my girlfriend (who has the same phone) the call quality has dropped , the speech sounds like she or I are talking through a voice changer where the words become incomprehensible or the sound totally drops momentarily and then returns to normal , so now im finding myself asking are you there over and over , do you think this phone will ever exhibit excellent voice quality and call reliablity or should I just go back to my old company?
Since updating my phone to the new 2.1 Firmware I have been seeing my phone at full bars which I normally don't see on a regulars bases like I do now but if I am having full bars why am I having connectivity issues like when I am talking on the phone it is constantly breaking up almost to the point it sounds like a blown speaker and when I send a SMS it pauses at the end of the loading box for about a minutes before the messages is completely sent. These 2 issues I have never experienced until right after the install of the new 2.1 Firmware
-
I switched to iPage hosting since Mobile Me is expiring. Also recently upgraded to OS X 10.7.3 and am using iWeb 3.0.4 for my web site design. I published directly to the FTP from iWeb but all title tags, meta tags have disappeared and I'm not showing up in Google or others. I tried publishing from iWeb SEO but it couldn't complete the process.
Should I first publish to a folder as I did before with Mobile Me, then delete all old sitemaps and start over with the Site Map Automator and then try to publish from the SEO tool? Will I lose the key words and meta tags that are already in iWeb SEO?
Thanks!The problem is that most tech support people don't understand how iWeb structures a site.
When a visitor types in "domain-name-com" the browser expects to find an index.html in the root folder on the server. In "normal" websites the index.html file is the first page of the site.
The iWeb index.html file is a redirect to the first, or landing, page of the site which is the one at the top of the left column in iWeb just below the site name.
iWeb produces two index.html files.
One is outside of the folder containing the rest of the files and directs to - folder-name/home-page-name.html
The other one is inside the folder and directs to - home-page-name.html
You have two choices of how you upload the files since you are publishing to a local folder.
You can upload the whole folder plus the external index.html to the root folder on the server and the URL to any page will be...
http://www.domain-name.com/site-name/page-name.html
If you upload the contents of the site folder, and not the folder or the external index.html, the URL will be...
http://www.domain-name.com/page-name.html
See this page for more info and the warning about breaking the RSS feed....
http://www.iwebformusicians.com/iWeb/URLs-Favicons.html -
Getting error in sap.ui.core.js file in sapui5 Mobile Application
Hi,
I have done mobile app in SAPUI5. When i run that application the following problem occurred.
HTTP request failed0,, - at file :/// assets/www/resources/sap-ui-core.js: 6809
that means in this code
function J(i, m, v, w) {
if (i <= G(w)) {
var N = new Date(), O = {
time : B(N.getHours(), 2) + ":" + B(N.getMinutes(), 2)
+ ":" + B(N.getSeconds(), 2),
date : B(N.getFullYear(), 4) + "-"
+ B(N.getMonth() + 1, 2) + "-"
+ B(N.getDate(), 2),
timestamp : N.getTime(),
level : i,
message : m || "",
details : v || "",
component : w || ""
y.push(O);
if (A) {
A.onLogEntry(O)
if (window.console) {
var Q = O.date + " " + O.time + " " + o + O.message
+ " - " + O.details + " " + O.component;
switch {
case F:
case l:
console.error(Q); //6809 line
break;
case W:
console.warn(Q);
break;
case I:
console.info ? console.info(Q) : console.log(Q);
break;
case D:
console.debug ? console.debug(Q) : console.log(Q);
break;
case T:
console.trace ? console.trace(Q) : console.log(Q);
break
return O
Please help me how to solve that issue.
Thanks&Regards
SrideviHi Vijaykumar,
Thanks for your reply. I did the above procedure mentioned in the link provided. But still I am having the issue. Below is the code which is getting struck after alert
alert("Getting Plants");
this.plantList
.bindAggregation(
"items",
path : "/Material_List('"+selectedmid+"')/PlantSet",
template : new sap.m.StandardListItem(
title : "{Materialnumber}",
type : sap.m.ListType.Navigation,
tap : [ oController.plantListTap,
oController ]
Can anyone please help me in getting resolve the issue as it is a showstopper for the application.
Regards
Sridevi -
Invalid subckt definition name
Not sure why the below errors occur. I created the attached IPD135N031.cir file from the OptiMOS3_30V_40V.lib file (changed to a txt file in order to post). I use the IPD135N031.cir file in the Select Simulation model > Load From File step 6 of the Component Wizard.
------ Checking SPICE netlist for diode driver - Wednesday, May 18, 2011, 1:33:32 PM ------
SPICE Netlist Error in schematic RefDes 'u1', element 'x1': Invalid subckt definition name 's4_30_h_var'
SPICE Netlist Error in schematic RefDes 'u1', element 'ipd135n03l__mosfet__2': Due to errors, the subckt instance 'x1' has been omitted from the simulation
SPICE Netlist Error in schematic RefDes 'u1', element 'xu1': Not enough nodes found
======= SPICE Netlist check completed, 3 error(s), 0 warning(s) =======
Thanks
Attachments:
IPD135N03L.cir 2 KB
OptiMOS3_30V_40V.txt 489 KBHi,
In IPD135N031.cir file you attached, there is a line that starts with:
X1 d1 g s Tj S4_30_h_var
This line is a call command in spice, it's looking for another model called :s4_30_H_H_var. You did not include the second model and that's why you got the error message.
The attached file is the complete model. I made one modification to the syntax that you should know about. In the model, one of the expressions has a log function. If left that way, Multisim will treat log()expression as ln(), otherwise you have to use log10. I changed the expresssion to log10.
Tien P.
National Instruments
Attachments:
IPD135N03L_complete.txt 5 KB -
Is SP 2013 Service Pack1 mandatory for my portal
hi,
Our application is still in UAT env. and NOT deployed in the prod. farm.
But my customer's IT team has created few webapplns on the already provisioned prod.farm.
Currenty there is no SP2013 SP1 installed on the prod.farm.
Now in my dev and UAT env. me and myteam have installed SP 2013 only and not sp 2013 SP1 .
now my question is, do i need to tell the my customer to install SP 2013 SP1 on the production farm?
if I develop my portal in SP 2013 and ddint test it in SP1 on dev and UAT env. will my code break on prod.farm where SP1 is installed.
Whats the best practice in this case. Can I tell them to install SP1 on the prod.farm and I will deploy my portal on this without testing it on the dev and UAT where there doesnt exist SP1.
What are those scenarios where I can recommend installing SP 2013 SP1 on the prod. farm.
my portal is using team site template and custom site permissions, custom doclib permissions and event receivers at present.
Will be implementing community portal , my sites, feeds in the coming months.So would like to know what are those additional stuff added in the SP1, such that i can leverage those.
any pointers /best approaches are highly appreciated!If your production environment is on RTM then you must roll back your Dev and UAT to match it or bring up production to match.
In theory upgrading the production environment to match Dev and UAT would also be fine but i get the impression that your UAT isn't a fully representative example of the client's environment. As the client will need to be careful during the upgrade process
and ideally test it first. Rolling back your Dev/UAT is the safer option.
If you were to run out of sync environments then you would probably run the code intended for SP1, but it wouldn't be certain to work the same. You wouldn't be able to move sites or databases from Dev/UAT to production.
You'll need to start again or get the client to update to the same level as you.
The advantages in SP1 are mostly around stability/performance and so on. Don't expect any new awesome features.
Maybe you are looking for
-
Acrobat XI Pro automatically closes itself with no messages etc. after few seconds
Greetings all, I don't know why but my Acrobat XI Pro (11.0.0) automatically closes itself (with no warning, no messages etc.) after few seconds. I installed the AXI as a part of the CS6 Master Collection on my Windows 8 (x64) laptop. Just as suggest
-
I have a 5D III. I would like to tether (wireless or cable-direct) to my iPad 4 Retina so I can proof pictures in near real-time. I prefer wireless so I can work in the field where this is NO internet connectivity. I have Aperture, Lightroom 5, and
-
Does Firefox 5 have any problems with Kaspersky ant-virus
Since I downloaded Firefox 5 I have a problem with a process avp.exe in Kaspersky anti-virus 2011. This process uses 70-80% of my CPU slowing my system almost completely. This only started after I downloaded F5. Is this just a coincidence?
-
Movement types from sd point of view
does somebody have a list of movement types and some document explaining what movement types are meant for what? from sd point of view thank s.r.c [email protected]
-
1Z0-108 Practice Study Material
You can find that at http://www.beitcertified.com/oracle-1z0-108-exam-19953.htm