Warning BH-905 not compatible with N95-8gb accordi...

purchased the BH-905 they pair with the n95-8gb alright but after they paired with one device you cannot pair with any other device all you can do is set the bh-905 back to factory settings and pair with second device.. ***bleep*** called nokia and all Herr Heinemann answered: sorry bh-905 is not compatible with n95-8gb

Hi
Unfortunately I don't have any information on the pairing issue but can confirm that according to our compatibility information the BH-905 is compatible with the N958GB in both Bluetooth and 3.5mm wired connection.
Hope this helps (a little?)

Similar Messages

Be Warned - Mavericks is not compatible with Microsoft Office 365!!!!!!!!!!!!!!!

Be Warned - Mavericks is not compatible with Microsoft Office 365!!!!!!!!!!!!!!!
I upgraded to Mavericks on 4 seperate computers, an 2 iMacs, MBPro and an MBAir and ALL four no longer connect to Microsoft Office 365 email accounts either with Office 2011 or the built in Mac apps. Apple support says "Microsoft knew for a year that Mavericks was coming out and it their job to make it compatible". I repsonded that their own Apps like Mail, Contacts and Calendar don't work either and they attempted to trouble shoot those apps only to no avail after 4 hours and a Mavericks reinstall. I have also tried an Office reinstall.
Right now I am no where, stuck between two companies who say it's the other guys fault......

Me again:
A colleagues more formal description of the problem:
We have had a major problem with people working directly off of the afp reshares with MS Word.
Word creates "Word Work Files" and usually is able to store them in either "Share/Temporary Items/uid/TemporaryItems/" or "Share/.TemporaryItems/folders.uid/TemporaryItems" as long as permissions are correct.
This works under 10.5.7 seed release 9J39 with direct attached storage, but with the Xsan reshared the word work files appear in the same folder as the opened document even though the permission for temporary items are correct.
This causes a number of issues, one being that if one user has a document open and another clears out the word work file then the open document cannot be saved.
Another issue that we have seen is where the word work file is created and then the original document disappears (although I think this may be another user housekeeping the word work files again).
We have tried to persuade users to work on local copies of the documents instead, but old habits die hard...

My virus scanner warns it is not compatible with the latest version of firefox, so i deinstalled firefox, It is trendmicro. I would like to have an earlier firefox version back, but were can i find it

I upgraded FireFox. My virusscanner TrendMicro complained it was nog compatible with this version.
So I desinstalled FireFox.
Do you know a solution?
Otherwise I would like to have an earlier version of FireFox, but where can I download it? I don't see a link at your site
thanx Yrram

Hey yrram,
There are a lot of benefits to running the latest version of Firefox. You might want to consider running the older version on [http://portableapps.com/apps/internet/firefox_portable/localization#legacy36 a USB Stick with PortableApps]. That way you'll still be able to run the latest version for your day to day activities. You could also try the workaround in [https://support.mozilla.org/en-US/kb/websites-incorrectly-report-firefox-outdated-or-in this article].
If you still want to roll back to a previous version of Firefox, just take a look at the Knowledge Base article [[Installing a previous version of Firefox]].
Hopefully this helps!

How do I access "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...." web sites; when I try to download any alternate browser, then a warning that alternate is "imcompatable with your opera

How do I access websites that warn: "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...."? When I try to download any alternate browser, all I get is another warning that the alternate is "not compatible with your operating system." Is Firefox preventing this? The site listed below is a job application site. I've had this same problem with other job application sites also.
== URL of affected sites ==
https://storefront.kenexa.com/lithia/cc/Home.ss

There should be a User Agent Switcher menu item under Tools, which gives you the browser names you can impersonate.
The menu item name changes to the browser UA you are presently using.
There is also a User Agent Switcher button, you can add it using View -> Toolbars -> Customize, and dragging the button to your toolbar.
See http://chrispederick.com/work/user-agent-switcher/features/ and http://chrispederick.com/work/user-agent-switcher/help/
You can just start trying IE versions (or the versions it says on the site) until it lets you in.

Enabling Warning for Application that is not compatible with Ipod Touch

Sorry if this has been asked before. Searching for prior posts about it, I ended up with pages of Compatibility Mode Posts.
Not thinking, when iTunes asked me if I wanted to disable the warning when an application was not compatible with my Ipod Touch, I said Yes. Searching through all the settings,Preferences and properties (or even in Regedit), I see no way to re-enable this option. Kinda nice to have the warning so I know it did not install, and would like to get it back. About the only thing I saw remotely close was the option to "Reset all dialog warnings" in the preferences menu, and it didn't work.
Any thoughts???

Rebuilding your iTunes preferences files might get that back for you, Pa.
The technique you need for that is described in the "Remove iTunes Preference files" section of the "User-specific troubleshooting" section of the following document:
[iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues|http://support.apple.com/kb/TS1717]
Before starting out on that, set the PC up to view hidden files and folders, as per the description at the beginning of the "User-specific troubleshooting" section.
*Some heads-ups before proceeding*
Be careful of any custom preferences (EQ, imports, etc) you have set up. Take a note of those, because rebuilding the relevant prefs returns all such prefs to their default settings. You may need to set up any such preferences all over again.
You may also need to reinstall any third-party plugins afterwards.
Things to expect during the pref file rebuild ... moving one set to the desktop (on XP) causes the setup assistant to run during the rebuild. Avoid saying yes if it asks you to import all the media files on your PC into iTunes. Otherwise, you'll end up duplicating all your content in your iTunes library. Moving the other set of prefs to the desktop (on XP) means that you have to agree to the licence agreement again.
Message was edited by: b noir

NOKIA N95 NOT COMPATIBLE WITH CK20 (A2DP)

Hi,
I just bought my new Nokia N95 and I would like to buy a Nokia Car kit that allow me to enable all the features of the N95 so I thought to buy the CK-20W but in the Nokia table of compatibility says that is not compatible with Music with Bluetooth connection (A2DP), I read that Nokia N95 has Bluetooth profile (A2DP) so why doesn’t it work with the CK-20W Music Connection?
Nokia N95
Firmware V 11.0.026

it does

Cannot update to 3.5 on older MacPro and 3.5 not compatible with 3.4.5

It appears that you cannot update Aperture to 3.5 on older Macs. Worse yet the new update is not compatible with the previous version.
The questions are ---
Is this a temproary issue or a permanent issue?
Can I regress back to version 3.4.5 to get my compatibility back ?
I have multiple computers I use to work on my photography.
I use a older Mac Pro Vintage late 2007 that cannot be updated beyond OS 10.7.5. This is currently my primary photo computer.
With 3ghz Quad cores and over a terabyte of drive space no need to update yet except for not being able to load the latest OS.
I also use a MacBookPro Vintage Late 2011 and it was just updated to Mavericks. I use this to edit my photos on the go.
I will consider updating to the latest Mac Pro when it becomes available but what to do until then and a warning to others.

Actually, I had this same problem - accidentally upgraded my library on my Mac Air to 3.5, but am not running Aperture 3.5 on any of my other, older Macs. I *was* able to downgrade the library back to 3.4.5. BAsically, I had to open the library on a computer running Aperture 3.4.5 in library repair mode (holding down command and option when opening). In the ensuing dialog I had to choose to rebuild the library. I first tried just repairing, and it seemed to work, but next time I opened Aperture I got the "library can't be opened iwth an older version of Aperture" message. Rebuilding it seems to have done the trick.
A more detailed explanation (though not written for this particular scenario) is here:
http://www.apertureexpert.com/faq/common-aperture-questions-issues-and-rep/how-d o-i-repair-or-rebuild-my-aperture-library-or-permission.html
Having restored the library to 3.4.5 format, I downgraded Aperture on my Air to 3.4.5 as well and it's been smooth sailing. Just make sure you have Mavericks set up to *NOT* automatically update your apps, or you'll end up in the same situtation all over again when it silently upgrades Aperture to 3.5 again.
Good luck!

Assuming video is not compatible with compiz-fusion...?

I'm installing ArchLinux on a extra computer at work... works great... but for the fun of it I tried running compiz fusion on it. I get this:
[root@myhost ~]# fusion-icon
* Detected Session: kde
* Searching for installed applications...
* Using the GTK Interface
(fusion-icon:7540): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
* KWin is already running
* Setting window manager to Compiz
... executing: compiz --replace --sm-disable --ignore-desktop-hints ccp
compiz (core) - Fatal: No GLXFBConfig for default depth, this isn't going to work.
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0
* Setting window manager to KWin
I'm just using an xorg.conf that was generated with #X -configure, and have also tried one generated with hwd -x. Both detect "sis" as the video driver. Listing below...
Am I right to assume that this means that the video in not compatible with compiz? Or could it be some settings that need to be tweaked.
Thanks for any advice.
Rick
xorg.conf.sis generated with "#hwd -x"
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
# Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Card0"
Driver "sis"
VendorName "All"
BoardName "All"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
xorg.conf generated with "#X -configure"
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "record"
Load "dri"
Load "dbe"
Load "xtrap"
Load "GLcore"
Load "glx"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 270 200 # mm
Identifier "Monitor0"
VendorName "SAM"
ModelName "1033"
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync 30.0 - 55.0
VertRefresh 50.0 - 120.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "Accel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "TurboQueue" # [<bool>]
#Option "FastVram" # [<bool>]
#Option "HostBus" # [<bool>]
#Option "RenderAcceleration" # [<bool>]
#Option "ForceCRT1Type" # <str>
#Option "ForceCRT2Type" # <str>
#Option "ShadowFB" # [<bool>]
#Option "DRI" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "Vesa" # [<bool>]
#Option "MaxXFBMem" # 
#Option "EnableSiSCtrl" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "HWCursor" # [<bool>]
#Option "UseColorHWCursor" # [<bool>]
#Option "Rotate" # <str>
#Option "Reflect" # <str>
#Option "Xvideo" # [<bool>]
#Option "InternalModes" # [<bool>]
#Option "OverruleFrequencyRanges" # [<bool>]
#Option "RestoreBySetMode" # [<bool>]
#Option "ForceCRT1" # [<bool>]
#Option "XvOnCRT2" # [<bool>]
#Option "PanelDelayCompensation" # 
#Option "PDC" # 
#Option "PanelDelayCompensation2" # 
#Option "PDC2" # 
#Option "PanelDelayCompensation1" # 
#Option "PDC1" # 
#Option "EMI" # 
#Option "LVDSHL" # 
#Option "ForcePanelRGB" # 
#Option "SpecialTiming" # <str>
#Option "TVStandard" # <str>
#Option "UseROMData" # [<bool>]
#Option "UseOEMData" # [<bool>]
#Option "YV12" # [<bool>]
#Option "CHTVType" # [<bool>]
#Option "CHTVOverscan" # [<bool>]
#Option "CHTVSuperOverscan" # [<bool>]
#Option "CHTVLumaBandwidthCVBS" # 
#Option "CHTVLumaBandwidthSVIDEO" # 
#Option "CHTVLumaFlickerFilter" # 
#Option "CHTVChromaBandwidth" # 
#Option "CHTVChromaFlickerFilter" # 
#Option "CHTVCVBSColor" # [<bool>]
#Option "CHTVTextEnhance" # 
#Option "CHTVContrast" # 
#Option "SISTVEdgeEnhance" # 
#Option "SISTVAntiFlicker" # <str>
#Option "SISTVSaturation" # 
#Option "SISTVCFilter" # [<bool>]
#Option "SISTVYFilter" # 
#Option "SISTVColorCalibFine" # 
#Option "SISTVColorCalibCoarse" # 
#Option "SISTVXScale" # 
#Option "SISTVYScale" # 
#Option "TVXPosOffset" # 
#Option "TVYPosOffset" # 
#Option "SIS6326TVAntiFlicker" # <str>
#Option "SIS6326TVEnableYFilter" # [<bool>]
#Option "SIS6326TVYFilterStrong" # [<bool>]
#Option "SIS6326TVForcePlug" # <str>
#Option "SIS6326FSCAdjust" # 
#Option "YPbPrAspectRatio" # <str>
#Option "TVBlueWorkAround" # [<bool>]
#Option "ColorHWCursorBlending" # [<bool>]
#Option "ColorHWCursorBlendThreshold" # 
#Option "CRT2Detection" # [<bool>]
#Option "ForceCRT2ReDetection" # [<bool>]
#Option "SenseYPbPr" # [<bool>]
#Option "CRT1Gamma" # [<bool>]
#Option "CRT2Gamma" # [<str>]
#Option "GammaBrightness" # <str>
#Option "GammaBrightnessCRT2" # <str>
#Option "CRT2GammaBrightness" # <str>
#Option "Brightness" # <str>
#Option "NewGammaBrightness" # <str>
#Option "CRT2Brightness" # <str>
#Option "CRT2NewGammaBrightness" # <str>
#Option "Contrast" # <str>
#Option "NewGammaContrast" # <str>
#Option "CRT2Contrast" # <str>
#Option "CRT2NewGammaContrast" # <str>
#Option "CRT1Saturation" # 
#Option "XvGamma" # [<str>]
#Option "XvDefaultContrast" # 
#Option "XvDefaultBrightness" # 
#Option "XvDefaultHue" # 
#Option "XvDefaultSaturation" # 
#Option "XvDefaultDisableGfx" # [<bool>]
#Option "XvDefaultDisableGfxLR" # [<bool>]
#Option "XvChromaMin" # 
#Option "XvChromaMax" # 
#Option "XvUseChromaKey" # [<bool>]
#Option "XvInsideChromaKey" # [<bool>]
#Option "XvYUVChromaKey" # [<bool>]
#Option "XvDisableColorKey" # [<bool>]
#Option "XvUseMemcpy" # [<bool>]
#Option "BenchmarkMemcpy" # [<bool>]
#Option "UseSSE" # [<bool>]
#Option "XvDefaultAdaptor" # <str>
#Option "ScaleLCD" # [<bool>]
#Option "CenterLCD" # [<bool>]
#Option "EnableHotkey" # [<bool>]
#Option "ForceCRT1VGAAspect" # <str>
#Option "ForceCRT2VGAAspect" # <str>
#Option "MergedFB" # [<str>]
#Option "TwinView" # [<str>]
#Option "MergedFBAuto" # [<bool>]
#Option "CRT2HSync" # <str>
#Option "SecondMonitorHorizSync" # <str>
#Option "CRT2VRefresh" # <str>
#Option "SecondMonitorVertRefresh" # <str>
#Option "CRT2Position" # <str>
#Option "TwinViewOrientation" # <str>
#Option "MetaModes" # <str>
#Option "MergedDPI" # <str>
#Option "MergedXinerama" # [<bool>]
#Option "TwinviewXineramaInfo" # [<bool>]
#Option "MergedXineramaCRT2IsScreen0" # [<bool>]
#Option "MergedNonRectangular" # [<bool>]
#Option "MergedMouseRestriction" # [<bool>]
Identifier "Card0"
Driver "sis"
VendorName "Silicon Integrated Systems [SiS]"
BoardName "65x/M650/740 PCI/AGP VGA Display Adapter"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

lateralus wrote:
stingray wrote:
Misfit138 wrote:IIRC, the SiS driver is quite limited, and only offers 2d.
Thats what I expected to hear...
Are you 100% sure? I just run glxinfo and it says:
direct rendering: Yes
And I'm confused. Are there any chances of getting compositing to work on SiS card in this case?
I'm not the expert here, but compiz can work with indirect rendering, so I don't think that's the qualifier for if it works for your system.

Firefox 4 is apparently not compatibile with MacOS 10.5.8 PPC since after downloading and trying to open a pop-up says it is not compatible with my system. This version is probably for MacOS 10.5 Intel users. Unless there's another reason?

When Firefox 4 was proposed, I immediately checked the system requirements for Mac user:
"MacOS 5
MacOS 6"
So I downloaded it, since my OS is 10.5.8 (PPC), I thought I was fine. When downloaded, the Firefox icon showed a Stop sign in the middle: maybe a new logo? But when trying to open it, a window popped up saying this version was not compatible with my system. Therefore, using Time Machine, I reverted back to Firefox 3.6.16.
If this is the case, you should absolutely warn '''PPC''' users not to download Firefox 4. Your version is probably for '''Intel''' versions.
Unless you come up with a fix, I won't be able to use Firefox 4 until I change computers, having updated my system to the last possible upgrade.

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

'not compatible with your current codelines' and 'Patch 7461070'

We are trying to upgrade EBS from 11.5.10.2 to R12.1.1 using Maintenance Wizard v2.15, and we are on "Apply Preinstall Patches" for "Perform the Upgrade". We got some strange errors:
(1). AutoPatch error for "Task: Apply Preinstall Patches":
This patch is not compatible with your current codelines.
This patch is compatible with: entity 'xla' - codeline 'R12.XLA.A'.
Your current on-site codeline for the entity 'xla' is: 'R12.XLA.B'.
for "1-Apply patch 6832389 (Required)", "2-Apply patch 6625757 (Required)", "3-Apply patch 6648785 (Required)", "4-Apply patch 6166150 (Required)", "5-Apply patch 6146757 (Required)", "6-Apply patch 6757123 (Required)", "7-Apply patch 6172183 (Required)", "8-Apply patch 6774040 (Required)", "9-Apply patches 6976563 and 7351384 (Conditionally Required)"
(2). Got patch version mismatch errors when applying patch#7461070 for "10-Apply AD 12.1.1 upgrade driver (Required)":
###############################################################################SUMMARY - patchit12.sh - of patch: 7461070, driver: driver=u7461070.drv###############################################################################patchit12.sh - is exiting with no actions. ie. Patch 7461070 not applied.There is a mismatch between the patch version specified and the releaseversion obtained from your Applications environment. In order to applyRelease 12 patches to previous Applications versions, the patch must be applied in preinstall mode.This can be done by passing the appropriate value to the preinstall parameter of eof_patch12.sh.INFO: Not starting patch alert monitor, to start: Login Engineer, User Admin, Update Profile
For first issue:
Verified first 2 patches:
Patch 6832389:R12.AP.A R12: Critical Pre-upgrade for R12
Patch 6625757 6625757:R12.XLA.A
These patches are for 12.0 upgrade, not for 12.1
Why MW is trying to apply these R12.0 patches?
For second issue I found Note 779466.1 Patch 6604842 fails during a R12 Upgrade via Maintenance
Wizard as DB still reports R11i
similar but at 12.0 level.
Shoul all customers follow the workaround and manually apply the patch?

I got similar error:
ACTION: execute on node: apps, patch=7461070, driver=u7461070.drv
patchit12.sh REMOTE SIZE: 53273 LOCAL SIZE: 53273
OK - no update needed for patchit12.sh, same size as on EOF: 53273 bytes.
Found release REL=11.5.10.2 from fnd_product_groups.
WARNING - patchit12.sh has been invoked on a non-R12 Applications system.
SUMMARY - patchit12.sh - of patch: 7461070, driver: driver=u7461070.drv
patchit12.sh - is exiting with no actions. ie. Patch 7461070 not applied.
There is a mismatch between the patch version specified and the release
version obtained from your Applications environment. In order to apply
Release 12 patches to previous Applications versions, the patch must be
applied in preinstall mode.This can be done by passing the appropriate
value to the preinstall parameter of eof_patch12.sh.
INFO: Not starting patch alert monitor, to start: Login Engineer, User Admin, Update Profile
Should patch 7461070 be applied manually?

Firefox 5.0.1 would cause my Free Download Manager to be disabled because it is not compatibl with the new version. What ones are compatible and free?

I have received a pop-up advisory from Firefox several times, saying that my Free Download Manager is not compatible with the recommended 5.0.1 upgrade and wold have to be disabled until the compatibility problem was corrected.
(I think that I did download it, and that was when I got the first warning. I visited my download m manager shortly afterward, and all my download history had disappeared. I think that I then reversed the upgrade.)
Since then, my emails will load only in Basic HTML, which I have several problems with. I don't know if that is a Google or a Firefox problem.
So, my initial problem is that I need a reliable and easy to use free downloader before I can upgrade and get my Standard HTML back.
What free Download Managers are compatible with Firefox 5.0.1?
While we're at it, is 5.0.1 Beta? And what is Beta?

Solution: (Free Download Manager)
Go here: http://codecpack.co/download/Free_Download_Manager.html and download Free Download Manager 3.8.1067 Beta 3, it works perfectly with Firefox 5.0.1
Solution: (to Google mail aka Gmail)
I have had this problem for a while since I did a previous Firefox update, where I had to force Gmail to load in Basic HTML else it's next to impossible to use it. The solution is this: simply update your Java, and Gmail will work without a problem using Standard HTML. To update your Java go here: http://www.java.com/en/ and select "Free Java Download".
And beta normally, universally, means "the not quite there yet version of the version we're aiming for" NORMALLY used during production and testing of a type of software.

Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11. I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies.

Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11. I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies. I even uninstalled and re-installed IE 11. It is still doing it. I am surprized that a company like Adobe would just ignore our posts and leave us hanging this this.
Error message is FAILED TO GET DISPATCH FROM IBRWSR2. Then when you click on it the next error message says: PHTML IS NULL. You have to click this error message twice and then the PDF finally loads. Happened every time
Does anyone have a solution since Adobe will not respond?
As a last resort I will try uninstalling the Adobe Reader XI and install Adobe Reader 10 instead. It seems to work ok. But when I try to install version 10 the Adobe site tries to install XI. Any ideas?
JimP08758

It worked just fine for me.
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

Trying to veiw videos from a website that requires me to download firefox and silverlight.My imac osx 10.5.8 will now download firefox. firfx tells me my mac is not compatible with ffox Please help me ? Thank you

trying to veiw videos from a website that requires me to download firefox and silverlight.My imac osx 10.5.8 will now download firefox. firfx tells me my mac is not compatible with ffox Please help me ? Thank you

There is a version of Firefox 4 available for PPC Macs:
TenFourFox 4.0.1 Firefox 4 For PowerPC Browser Released
Version 4.0.1 of TenFour Fox, FloodGap's port of Firefox 4 for Power PC
Macs that supports both Mac oS X 10.4 and 10.5. has been released.
Mozilla.org dropped support for OS 10.5 after Firefox 3.6 and for Power
PC with the fourth beta of Firefox 4.
TenFourFox uses almost all the same code as Firefox 4 and has nearly all
the same features, including faster JavaScript, WebM video, and HTML 5
and CSS 3 support, as well as new and emerging Web features, but with
the code needed to keep your Power Mac functional and fast. Out of beta
and it's ready for action, versiob 4.0.1 is a performance, security and
stability update incorporating Mozilla's Firefox 4.0.1 plus AltiVec acceler
-ation for WebM and browser graphics, and G5 JavaScript acceleration.
For more information, visit:
http://www.floodgap.com/software/tenfourfox/
Source: from http://www.applelinks.com - posted April 25, 2011)
Now for the intersting bit: TenFourFox, like Firefox, does not support most plug-ins. Unless you are prone to headaches (in which case don't) you can read about that here:
http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
But there is a workaround!
Open TenFourFox and type in the address bar: about:config (no spaces) and click return. This gives you a warning that it might harm the application. Ignore that and click on 'I'll be careful, I promise' and you get the config file that you can edit - with great care.
Look/search (scroll down) for: tenfourfox.plugins.enabled
Set it to true. (Double click it to toggle it)
Now close TenFourFox, open it again, and Flash will now work, as it now uses the plug-ins that Safari has stored.
With SilverLight, Microsoft attempted to create their own version of what a replacement for Flash could be - but not to universal acclaim. You can read more about it here:
http://silverlight.net/
So, if you go to any sites that have been designed for this new Silverlight stuff, you can download the plug-in from here (but make certain that you are downloading SilverLight v.1.0 for OS X (10.4.8 upwards) if you are using a PPC Mac, but even this will not work with Safari 4. Version 2 only works with Intel Macs and does work with Safari 4/5. The solution is to download and install the latest version of Flip4Mac, which now includes a Silverlight component:
http://dynamic.telestream.net/downloads/download-flip4macwmv.htm
But the latest news is that Microsoft will probably abandon Silverlight in favour of HTML5:
http://www.appleinsider.com/articles/10/10/29/apples_ios_pushes_microsoft_to_dia l_down_silverlight_for_html5.html and
http://www.bbc.co.uk/news/technology-11673384

Updated Firefox is not compatible with my low vision software - Zoomtext. How can I get Firefox to stop asking me to upgrade!!

Currently using version 3.6.27 as the updated versions are not compatible with my low vision software called Zoomtext. I constantly get Firefox asking me to upgrade. How can I get it to stop asking me to upgrade. (I have tried each upgrade and they are all incompatible with Zoomtext.

Go to '''Options''' window > '''Advanced''' panel > '''Update''' tab > '''Firefox updates '''> click '''Never check for updates (not recommended: security risk)''', click '''OK''' to save it, exit firefox and restart it.
see for more info: [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel#w_update-tab Options window - Advanced panel - Update tab]
BUT you see the warning : Warning: If you select this option, you will not receive '''critical security updates that may keep you safe online''' unless you frequently do a '''manual check for updates'''.
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

New Keyboard Not Compatible With All USB Flash Drives

Hi,
I've noticed that the new super-thin iMac keyboards are not compatible with all USB Flash Drives. Here's an example.
I have 2 USB Flash Drives. One is a ByteStor 2GB USB 2.0 High Speed Dataferry Flash Drive, the other is a Kingston DataTraveler 1GB USB 2.0 Flash Drive. Neither of these drives used to work with the previous design of iMac keyboard, giving me the "low power" warning.
However, the ByteStor works just fine with the new super-thin iMac keyboard, but oddly enough, the Kingston DataTraveler doesn't. Does anyone know why this is? What's the difference? When buying a new USB Flash Drive, how do you know if it's compatible with the new iMac keyboard or not?

Thanks. Yeah the Kingston DataTraveler works just fine if I plug it into one of the USB 2.0 ports on the back of the iMac. But if I plug it into the new thin Apple Keyboard, it gives the low power warning.
http://www.amazon.co.uk/Kingston-Technology-1GB-DataTraveler-Flash/dp/B000AV14M2 /ref=pdbbs2/203-9795812-0230310?ie=UTF8&s=electronics&qid=1187109154&sr=8-2
Anyway, I'll try that new keyboard software update and report back.

Warning BH-905 not compatible with N95-8gb accordi...

Similar Messages

Maybe you are looking for