Warning - Broken Pipe

Somebody! Please help!
Every time I download any file in .DMG format, it fails to mount. I get a square box Warning that says: The Following Disk Images failed to Mount:
then it says the name of the downloaded image and a reason. The reason is always the same- it says: Broken Pipe
There is nothing on this in Apple's knowledge base or in the support area. I'm lost.....

hi thewex,
This is a copy/paste from MacInTouch. It might apply to you.
"Matt Ruben
Great coverage on Tiger. I just experienced - and solved - a very nasty conflict between Tiger and Virtual PC 7. It's a bit long and complicated, but I've provided a short version too.
SHORT VERSION:
- A VPC helper application breaks Tiger's Disk Utility and all disk- related applications.
- Trashing the helper app fixes the problem, and still allows VPC to function (though it may not be able to mount some types of disk images)
LONG VERSION:
(1) There's a VPC Disk Image handler bundle that lives in /System/ Library/Plug-ins. I assume it helps VPC mount certain disk images.
(2) Upon upgrading to Tiger (via an "archive and install"), when you first launch VPC, it says you have to reinstall certain VPC components. These include the Disk Image handler and a couple of kernel extensions - components which are in subdirectories within / System/Library and are thus not transferred over by the archive and install process.
(3) The VPC Disk Image handler, when installed, prevents Apple's own diskmounter helper from working. As a result, all attempts to mount DMG files in the Finder fail with a "broken pipe" error; Disk Utility will not launch; Toast Titanium will not launch; and, I presume, any application that interacts with the diskmounter helper will fail.
(4) Moving the VPC Disk Image handler to the trash immediately restores all of the lost functionality of the Finder, Disk Utility and Toast Titanium.
(5) The Good News: VPC will still launch and function after the Disk Image handler has been trashed. I do not know if it is still able to mount disk images, however - haven't had a chance to test it."
Lori

Similar Messages

Broken pipe warning on trying to run dmg files

hi, i am trying to install a couple of program file updates.
however when i click on the xx.dmg i get warning cant run "broken pipe" in a dialog box.
help !
one of the upates i want to install is the 10.4.7 combi update but cant.
any suggestions please
thanks

hi, tried that several times already.
i was going to reinstall 10.4.7 updates again but this also have broken pipe error.
thanks
robin..

Solaris Error: 32: Broken pipe

Dear sir,
Yesterday I found in alert log file bellows warning.
and In that time some clients inform us they are cannot log on
to the application. after few times they could log on to
database automatically.
Oracle Database 10g
Version:- 10.2.0.4
OS :- Sun Solaries spark
and
It is dedicated environment .
In parameter file
processes = 4000
Content of alert log file.
===================
Mon Dec 6 16:03:00 2010
Thread 1 advanced to log sequence 67690 (LGWR switch)
Current log# 3 seq# 67690 mem# 0: /d01/oracle/oradata/stlbas/redo03.log
Mon Dec 6 16:20:39 2010
Process J000 died, see its trace file
Mon Dec 6 16:20:39 2010
kkjcre1p: unable to spawn jobq slave process
Mon Dec 6 16:20:39 2010
Errors in file /d04/admin/stlbas/bdump/stlbas_cjq0_1885.trc:
Process J000 died, see its trace file
Mon Dec 6 16:20:45 2010
kkjcre1p: unable to spawn jobq slave process
Mon Dec 6 16:20:45 2010
Errors in file /d04/admin/stlbas/bdump/stlbas_cjq0_1885.trc:
Mon Dec 6 16:21:01 2010
Process J000 died, see its trace file
Mon Dec 6 16:21:01 2010
kkjcre1p: unable to spawn jobq slave process
Mon Dec 6 16:21:01 2010
Errors in file /d04/admin/stlbas/bdump/stlbas_cjq0_1885.trc:
Mon Dec 6 16:21:17 2010
Process J000 died, see its trace file
Mon Dec 6 16:21:17 2010
kkjcre1p: unable to spawn jobq slave process
Mon Dec 6 16:21:17 2010
Errors in file /d04/admin/stlbas/bdump/stlbas_cjq0_1885.trc:
Mon Dec 6 16:36:24 2010
Process J000 died, see its trace file
Mon Dec 6 16:36:24 2010
kkjcre1p: unable to spawn jobq slave process
Mon Dec 6 16:36:24 2010
Errors in file /d04/admin/stlbas/bdump/stlbas_cjq0_1885.trc:
Process J000 died, see its trace file
Mon Dec 6 16:36:30 2010
kkjcre1p: unable to spawn jobq slave process
Mon Dec 6 16:36:30 2010
Errors in file /d04/admin/stlbas/bdump/stlbas_cjq0_1885.trc:
Mon Dec 6 16:36:41 2010
Process J000 died, see its trace file
Mon Dec 6 16:36:41 2010
kkjcre1p: unable to spawn jobq slave process
Mon Dec 6 16:36:41 2010
Errors in file /d04/admin/stlbas/bdump/stlbas_cjq0_1885.trc:
Mon Dec 6 16:38:18 2010
Thread 1 advanced to log sequence 67691 (LGWR switch)
Current log# 4 seq# 67691 mem# 0: /d01/oracle/oradata/stlbas/redo04.log
contents in the trace file are -
==========================
/d04/admin/stlbas/bdump/stlbas_cjq0_1885.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Oracle Label Security, OLAP, Data Mining Scoring Engine
and Real Application Testing options
ORACLE_HOME = /d04/oracle/ora102
System name:     SunOS
Node name:     badb1
Release:     5.10
Version:     Generic_142900-07
Machine:     sun4v
Instance name: stlbas
Redo thread mounted by this instance: 1
Oracle process number: 26
Unix process pid: 1885, image: oracle@badb1 (CJQ0)
*** SERVICE NAME:(SYS$BACKGROUND) 2010-12-01 13:24:30.248
*** SESSION ID:(2191.1) 2010-12-01 13:24:30.248
*** 2010-12-01 13:24:30.248
Process J000 is dead (pid=25006, state=3):
*** 2010-12-01 13:24:37.277
Process J000 is dead (pid=25012, state=3):
*** 2010-12-01 13:59:56.397
Process J000 is dead (pid=1185, state=3):
*** 2010-12-01 15:55:42.277
Process J000 is dead (pid=15686, state=3):
*** 2010-12-06 16:20:39.526
Process J000 is dead (pid=9458, state=3):
*** 2010-12-06 16:20:45.565
Process J000 is dead (pid=9480, state=3):
*** 2010-12-06 16:21:01.641
Process J000 is dead (pid=9518, state=3):
*** 2010-12-06 16:21:17.712
Process J000 is dead (pid=9550, state=3):
*** 2010-12-06 16:36:24.213
Process J000 is dead (pid=11942, state=3):
*** 2010-12-06 16:36:30.238
Process J000 is dead (pid=11970, state=3):
*** 2010-12-06 16:36:41.289
Process J000 is dead (pid=11998, state=3):
content of listener log file like bellows (in that time only)
=====================================
06-DEC-2010 16:16:21 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STLBAS)(CID=(PROGRAM=D:\OraNT\BIN\ifrun60.EXE)(HOST=APPLICATION-07)(USER=001zohur))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.36)(PORT=1771)) * establish * STLBAS * 0
06-DEC-2010 16:16:21 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STLBAS)(CID=(PROGRAM=D:\OraNT\BIN\RWRBE60.exe)(HOST=APPLICATION-02)(USER=154shahadat))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.32)(PORT=1528)) * establish * STLBAS * 0
06-DEC-2010 16:16:21 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STLBAS)(CID=(PROGRAM=D:\OraNT\BIN\RWRBE60.exe)(HOST=APPLICATION-07)(USER=043sathekur))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.36)(PORT=1758)) * establish * STLBAS * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Solaris Error: 32: Broken pipe
06-DEC-2010 16:16:21 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STLBAS)(CID=(PROGRAM=D:\OraNT\BIN\ifrun60.EXE)(HOST=APPLICATION-07)(USER=038alfee))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.36)(PORT=1772)) * establish * STLBAS * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Solaris Error: 32: Broken pipe
06-DEC-2010 16:16:22 * service_update * stlbas * 0
06-DEC-2010 16:16:24 * service_update * stlbas * 0
06-DEC-2010 16:16:25 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STLBAS)(CID=(PROGRAM=D:\OraNT\BIN\ifrun60.EXE)(HOST=APPLICATION-07)(USER=003aftab))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.36)(PORT=1794)) * establish * STLBAS * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Solaris Error: 32: Broken pipe
06-DEC-2010 16:16:25 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STLBAS)(CID=(PROGRAM=D:\OraNT\BIN\RWRBE60.exe)(HOST=NEW-SUN-APP)(USER=023sohel))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.37)(PORT=4291)) * establish * STLBAS * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Solaris Error: 32: Broken pipe
06-DEC-2010 16:16:27 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STLBAS)(CID=(PROGRAM=D:\OraNT\BIN\ifrun60.EXE)(HOST=APPLICATION-07)(USER=038alfee))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.36)(PORT=1796)) * establish * STLBAS * 0
06-DEC-2010 16:16:27 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STLBAS)(CID=(PROGRAM=D:\OraNT\BIN\ifrun60.EXE)(HOST=APPLICATION-07)(USER=038alfee))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.36)(PORT=1797)) * establish * STLBAS * 0
06-DEC-2010 16:16:28 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STLBAS)(CID=(PROGRAM=D:\OraNT\BIN\RWRBE60.exe)(HOST=APPLICATION-11)(USER=030salah))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.33)(PORT=3982)) * establish * STLBAS * 0
06-DEC-2010 16:16:29 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=stlbas)(CID=(PROGRAM=D:\OraNT\BIN\ifrun60.EXE)(HOST=REPORTS_APP)(USER=504refayet))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.233)(PORT=4995)) * establish * stlbas * 0
06-DEC-2010 16:16:29 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STLBAS)(CID=(PROGRAM=D:\OraNT\BIN\ifrun60.EXE)(HOST=APPLICATION-07)(USER=019aporna))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.36)(PORT=1800)) * establish * STLBAS * 0
06-DEC-2010 16:16:29 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=stlbas)(CID=(PROGRAM=D:\OraNT\BIN\ifrun60.EXE)(HOST=REPORTS_APP)(USER=504refayet))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.233)(PORT=4996)) * establish * stlbas * 0
06-DEC-2010 16:16:30 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STLBAS)(CID=(PROGRAM=D:\OraNT\BIN\ifrun60.EXE)(HOST=APPLICATION-07)(USER=003aftab))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.36)(PORT=1801)) * establish * STLBAS * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Solaris Error: 32: Broken pipe
06-DEC-2010 16:16:30 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STLBAS)(CID=(PROGRAM=D:\OraNT\BIN\ifrun60.EXE)(HOST=APPLICATION-07)(USER=019aporna))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.36)(PORT=1802)) * establish * STLBAS * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Solaris Error: 32: Broken pipe
06-DEC-2010 16:16:30 * service_update * stlbas * 0
06-DEC-2010 16:16:30 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=stlbas)(CID=(PROGRAM=D:\OraNT\BIN\ifrun60.EXE)(HOST=REPORTS_APP)(USER=501azad))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.233)(PORT=4997)) * establish * stlbas * 0
06-DEC-2010 16:16:31 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=stlbas)(CID=(PROGRAM=D:\OraNT\BIN\ifrun60.EXE)(HOST=REPORTS_APP)(USER=501azad))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.11.1.233)(PORT=4999)) * establish * stlbas * 0
06-DEC-2010 16:16:32 * service_update * stlbas * 0
What is the cause ?
and
why it shown "Solaris Error: 32: Broken pipe" ? please
Best Regards
Halim

Thanks
Sorry for not Formatting .
Actually I don't know how format code here.
SQL>
SQL>
SQL> select * from v$resource_limit ;
RESOURCE_NAME                  CURRENT_UTILIZATION MAX_UTILIZATION INITIAL_AL LIMIT_VALU
processes                                     1607            4000       4000       4000
sessions                                      1596            4005       4405       4405
enqueue_locks                                 1380            6280      57390      57390
enqueue_resources                              563            2901      19600 UNLIMITED
ges_procs                                        0               0          0          0
ges_ress                                         0               0          0 UNLIMITED
ges_locks                                        0               0          0 UNLIMITED
ges_cache_ress                                   0               0          0 UNLIMITED
ges_reg_msgs                                     0               0          0 UNLIMITED
ges_big_msgs                                     0               0          0 UNLIMITED
ges_rsv_msgs                                     0               0          0          0
gcs_resources                                    0               0          0          0
gcs_shadows                                      0               0          0          0
dml_locks                                       43             718      19380 UNLIMITED
temporary_table_locks                            0               3 UNLIMITED UNLIMITED
transactions                                   306             722       4845 UNLIMITED
branches                                         1              13       4845 UNLIMITED
cmtcallbk                                        2               4       4845 UNLIMITED
sort_segment_locks                            1594            4451 UNLIMITED UNLIMITED
max_rollback_segments                          136             361       4845      65535
max_shared_servers                               0               0 UNLIMITED UNLIMITED
parallel_max_servers                          1324            3600       2560       3600
22 rows selected.
SQL>Regards
Halim
Edited by: Abdul Halim on Dec 7, 2010 4:04 PM
Edited by: Abdul Halim on Dec 7, 2010 4:04 PM

Broken Pipe Error-unable to write to socket for second attempt

Hello,
I am opening socket connection wuth C-server program.
I am able to write and read from socket for first time but when tried to write second time in the same sequence gives broken pipe error.
As seen in the code initialize() methods works perfectly fine,
Pipe broken error is encountered for processRequest() method for writeBytes(begnmsg+"\n") method.
Please suggest solution asap.
Following is the code
import java.io.*;
import java.net.*;
public class PowerModelClient {
     Socket kkSocket = null;
BufferedReader in = null;
     PrintWriter out = null;
     DataOutputStream os = null;
          char m_eomChar = '\n';
public PowerModelClient(){
try{
//Opens socket connection with C-server program,
openConnection();
System.out.println("connected to server");
//Sends data base information to C-server program and receives acknowledgement from it.
String recv = initialize();
System.out.println("Initialize successful"+recv);
     try{
// Sleep for a short period of time
     Thread.sleep ( 10000 );
catch (InterruptedException ie) {}
     System.out.println("Initialize successfu 22l");
//Sends data base information to C-server program and receives acknowledgement from it.
processRequest();
//Closes socket connection
     closeConnection();
     System.out.println("Comesout to do QUIT ");
catch(Exception e){
     System.out.println("Error in main::"+e.toString());
     public static void main(String[] args) throws IOException {
                         new PowerModelClient();
Opens socket connection with C-server program,
public void openConnection() throws IOException{
try {
                    kkSocket = new Socket("server",port);               os = new DataOutputStream(kkSocket.getOutputStream());
     //out = new PrintWriter(kkSocket.getOutputStream(),true);
in = new BufferedReader(((java.io.Reader)(new InputStreamReader(kkSocket.getInputStream()))));
     } catch (UnknownHostException e) {
          System.err.println("Don't know about host: server.");
                    System.exit(1);
               } catch (IOException e) {
                    System.out.println("Couldn't get I/O for the connection to: server."+e.getMessage());
                    System.exit(1);
     Sends data base information to C-server program and receives acknowledgement from it.
     This makes the C program to connect with Database.
     The data send to socket should be tagged between @BEGMSG@\nand @ENDMSG@\n
     Similary data obtained from socket will be tagged between @BEGMSG@\n and @ENDMSG@\n
public String initialize() throws IOException{
               int ibyteread = 0;
          String fromServer = "";
          String beginmsg=padString("@BEGMSG@");
          String endmsg = padString("@ENDMSG@");
          String recv = "";
          if (kkSocket != null ) {
try {
                    // Set the socket timeout for ten seconds
               //     kkSocket.setSoTimeout(10000);
                                   //String data = padString("INIT\tabcd\tisderssddsdg\tdrtrs1\twetewte");                              os.writeBytes(beginmsg+m_eomChar);
               in.read();
          os.flush();
          os.writeBytes(data+m_eomChar);
          in.read();
     os.flush();
     os.writeBytes(endmsg+m_eomChar);
     os.flush();
     recv = readResponse(in);
} catch (UnknownHostException e) {
System.err.println("Trying to connect to unknown host: " + e);
                                             // Exception thrown when network timeout occurs
                         catch (InterruptedIOException iioe)
                         System.err.println ("Remote host timed out during read operation");
                         catch (IOException e) {
                         System.err.println("IOException: " + e);
                         catch (Exception e) {
               System.err.println("Exception: " + e);
          return recv;
Sends data after database connection is established to socket for entitlement processing
and will receive acknowledgement from server.
public void processRequest() throws IOException{
               int ibyteread = 0;
               String beginmsg=padString("@BEGMSG@");
               String endmsg = padString("@ENDMSG@");
               String fromServer = "";
          if (kkSocket != null ) {
               System.out.println("processRequest");
try {
                         kkSocket.setSendBufferSize(1024);
                         kkSocket.setSoTimeout (10000);
                                   kkSocket.setTcpNoDelay(true);
     os.writeBytes(beginmsg+m_eomChar);
     int i = in.read();
     System.out.println("Data read is :"+i);
     os.writeBytes(padString("PAEL\t1056209\t269732\t02/01/2003")+m_eomChar);
in.read();
System.out.println("Data read is :"+i);
out.flush();
System.out.println("Data read is :"+ibyteread);
os.writeBytes(endmsg+m_eomChar);
ibyteread = in.read();
readResponse(in);
System.out.println("-----end Processing:--------");
} catch (UnknownHostException e) {
System.err.println("Trying to connect to unknown host: " + e);
// Exception thrown when network timeout occurs
catch (InterruptedIOException iioe)
System.err.println ("Remote host timed out during read operation");
catch (Exception e) {
System.err.println("Exception: " + e);
The socket requires data to be of length 1024 character, so the renaining length is padded with empty string"\0"
public String padString(String value){
          StringBuffer strBuff = new StringBuffer(value);
               while(strBuff.toString().length() != 1023){
               strBuff.append("\0");
          //System.out.println("the length is "+ strBuff.toString().length());
          return strBuff.toString();
Close socket
public void closeConnection() throws IOException{
     in.close();
     os.close();
     kkSocket.close();
public String readResponse(BufferedReader in) {
boolean flag = false;
          java.lang.StringBuffer stringbuffer = new      StringBuffer(1024);
try {
// for(char ac[] = new char[1]; in.read(ac, 0, 1) != -1;) {
char ac[] = new char[1024];
if (in.read(ac, 0, 1) != -1) {
stringbuffer.append(ac[0]);
for(; in.read(ac, 0, 1) != -1 && ac[0] != m_eomChar; stringbuffer.append(ac[0]));
if(ac[0] == m_eomChar) {
System.out.println("received '" + stringbuffer.toString() + "'");
} else {
System.out.println("Message received by client was not properly terminated and was ignored."+stringbuffer.toString());
} else {
System.out.println("WARN: no response?");
} catch(java.io.IOException ioexception) {
System.out.println("Error in client " + ioexception + "Killing client.");
          return stringbuffer.toString();

if I were you I would put the lines
kkSocket.setSendBufferSize(1024);
kkSocket.setSoTimeout (10000);
kkSocket.setTcpNoDelay(true);
before connecting to the server, not after the initial message was sent.

Jackd + guitar: "timeouts and broken pipes"

Hi friends! I'm trying to pass my electric guitar via any rack/effects (like Guitarix or Creox) with no luck. I've got this sound card:
01:06.0 Multimedia audio controller: Creative Labs [SB Live! Value] EMU10k1X
01:06.1 Input device controller: Creative Labs [SB Live! Value] Input device controller
I try with QJackCtl and invoking jackd from the terminal with any luck.
jackd -d alsa -C -P
jackd 0.121.3
Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
could not open driver .so '/usr/lib/jack/jack_net.so': libcelt0.so.2: cannot open shared object file: No such file or directory
could not open driver .so '/usr/lib/jack/jack_firewire.so': libffado.so.2: cannot open shared object file: No such file or directory
JACK compiled with System V SHM support.
loading driver ..
creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|32bit
control device hw:0
configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 2 periods
ALSA: final selected sample format for capture: 16bit little-endian
ALSA: use 2 periods for capture
ALSA: final selected sample format for playback: 16bit little-endian
ALSA: use 2 periods for playback
jackd watchdog: timeout - killing jackd
[gabo@machina ~]$
This is the output from QJackCtl:
00:12:07.126 Client deactivated.
00:12:07.130 JACK is being forced...
cannot read server event (Success)
cannot continue execution of the processing graph (Bad file descriptor)
zombified - calling shutdown handler
cannot send request type 7 to server
cannot read result for request type 7 from server (Broken pipe)
cannot send request type 7 to server
cannot read result for request type 7 from server (Broken pipe)
00:12:07.339 JACK was stopped with exit status=1.
I can hear my guitar and record with Audacity, but when jackd enter into the escenario everything blows up. I read that nowadays almost any sound card will work with QJackCtl with the default options. I play with the parameters and sometimes jack refuse to start. With the default options on i can make it run, but i get no sound of the racks or guitar effects processors neither the guitar tuners that use jack takes the sound from the guitar. My line input is in capture via alsamixer, but still no luck. Any clue on this? I'm skipping steps?
Thanks in advance.
iamgabo

Hi!
groups && cat /proc/asound/cards && cat ~/.asoundrc && cat '/etc/security/limits.d/audio.conf' && jackd -v
adm disk lp wheel http network video audio optical storage power users polkitd vboxusers wireshark kismet
0 [Live ]: EMU10K1X - Dell Sound Blaster Live!
Dell Sound Blaster Live! at 0xcc00 irq 17
#pcm.upmix71 {
#type upmix
#slave.pcm "surround71"
#delay 15
#channels 8
pcm.!default {
type hw
card 0
ctl.!default {
type hw
card 0
# convert alsa API over jack API
# use it with
# % aplay foo.wav
# use this as default
pcm.!default {
type plug
slave { pcm "jack" }
ctl.mixer0 {
type hw
card 1
# pcm type jack
pcm.jack {
type jack
playback_ports {
0 system:playback_1
1 system:playback_2
capture_ports {
0 system:capture_1
1 system:capture_2
cat: /etc/security/limits.d/audio.conf: No such file or directory
I have a file called 99-audio.conf
cat /etc/security/limits.d/99-audio.conf
@audio - rtprio 99
@audio - memlock unlimited
Also i've seen some guys changing this file too:
cat /etc/security/limits.conf
# /etc/security/limits.conf
#Each line describes a limit for a user in the form:
#<domain> <type> <item> <value>
#Where:
#<domain> can be:
# - an user name
# - a group name, with @group syntax
# - the wildcard *, for default entry
# - the wildcard %, can be also used with %group syntax,
# for maxlogin limit
#<type> can have the two values:
# - "soft" for enforcing the soft limits
# - "hard" for enforcing hard limits
#<item> can be one of the following:
# - core - limits the core file size (KB)
# - data - max data size (KB)
# - fsize - maximum filesize (KB)
# - memlock - max locked-in-memory address space (KB)
# - nofile - max number of open files
# - rss - max resident set size (KB)
# - stack - max stack size (KB)
# - cpu - max CPU time (MIN)
# - nproc - max number of processes
# - as - address space limit (KB)
# - maxlogins - max number of logins for this user
# - maxsyslogins - max number of logins on the system
# - priority - the priority to run user process with
# - locks - max number of file locks the user can hold
# - sigpending - max number of pending signals
# - msgqueue - max memory used by POSIX message queues (bytes)
# - nice - max nice priority allowed to raise to values: [-20, 19]
# - rtprio - max realtime priority
#<domain> <type> <item> <value>
#* soft core 0
#* hard rss 10000
#@student hard nproc 20
#@faculty soft nproc 20
#@faculty hard nproc 50
#ftp hard nproc 0
#@student - maxlogins 4
* - rtprio 0
* - nice 0
@audio - rtprio 65
@audio - nice -10
@audio - memlock unlimited
jackd 0.121.3
There are the snaps for QJackCtl
Also, checkout this stuff that i've recorded with audacity, only from the line and nothing else
http://ompldr.org/vZ3A2eg
Thanks!
Last edited by iamgabo (2012-12-15 02:21:08)

Recovering the failed server to the Cluser !!!!!!!!!!!!!!!!!!! BROKEN PIPE

Hi,
          I have a weblogic cluster with 2 managed servers on 2 different machines,
          Now i have an application.ear which is kept on the first server and while deploying i choose the option "copy to the other server" and i deploy this EAR to the cluster.
          Mine is a applet-servlet based application and the applet gets downloaded onto client browser.
          Now when both the servers are up load balancing and the failover is also happening.Now the problem is when rejoing the failed server back to the cluster.
          I have setup the classpath entries and arguments entries "Remote Start" tab in the server configuration,
          I bring back the server through weblogic console and it joins the cluster also without any problem.
          The problem is if some users have already opened the application then after rejoining also it works fine.
          But if a new user tries to access the applications what happens is
          we get
          java.net.SocketException: Broken pipe
          at java.net.SocketOutputStream.socketWrite0(Native Method)
          at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
          at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
          at weblogic.servlet.internal.ChunkUtils.writeChunkTransfer(ChunkUtils.java:267)
          at weblogic.servlet.internal.ChunkUtils.writeChunks(ChunkUtils.java:239)
          at weblogic.servlet.internal.ChunkOutput.flush(ChunkOutput.java:311)
          at weblogic.servlet.internal.ChunkOutput.checkForFlush(ChunkOutput.java:387)
          at weblogic.servlet.internal.ChunkOutput.write(ChunkOutput.java:254)
          at weblogic.servlet.internal.ChunkOutputWrapper.write(ChunkOutputWrapper.java:125)
          at weblogic.servlet.internal.ServletOutputStreamImpl.write(ServletOutputStreamImpl.java:184)
          at java.io.ObjectOutputStream$BlockDataOutputStream.drain(ObjectOutputStream.java:1639)
          at java.io.ObjectOutputStream$BlockDataOutputStream.write(ObjectOutputStream.java:1603)
          at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1325)
          at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1304)
          at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1247)
          at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1052)
          at java.io.ObjectOutputStream.writeArray(ObjectOutputStream.java:1224)
          at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1050)
          at java.io.ObjectOutputStream.writeArray(ObjectOutputStream.java:1224)
          at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1050)
          at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1332)
          at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1304)
          at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1247)
          at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1052)
          at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1332)
          at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1304)
          at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1247)
          at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1052)
          at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:278)
          at WebRequestController.doPost(WebRequestController.java:184)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
               at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006)
          at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
          at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
          at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6718)
          at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
          at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
          at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764)
          at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644)
          at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
          at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
          We use IPlanet proxy server to route to the cluster
          Somebody pls help..
          Regards
          Suresh

Davin Czukoski wrote:
We have been switching back and forth between the BEA MS SQL server driver
and the Data Direct driver ever since the SP3 problem started.
This seems to be a problem with the BEA MS SQL server driver. We switch to
Data Direct and the problem went away.
There were no memory messages in our logs for SQL server.Ok. And this only happens during a big sequence of inserts? Let me see your code,
and please describe the table too. I'll try to duplicate it, but if the data direct driver
or the free MS driver works for you, go with them.
Joe
>
>
"Joseph Weinstein" <[email protected]> wrote in message
news:[email protected]..
Davin Czukoski wrote:
I am getting this error part way through an 1000 row update.
Exception: I/O exception while talking to the server,
java.io.IOException:
Broken pipe
Is it a driver or network issue?Probably neither. I'm guessing the DBMS ran out of memory for theinsert-logging
or something like that, and killed the client connection. Check your DBMSlog.
Joe Weinstein at BEA

Ping timeouts at server and broken pipes at client

I am experiencing unexpected broken pipe exceptions at the client side of a coherence server. These exceptions prevent our code to establish a connection to the cache server.
Due to network restrictions, we are connecting client and server through Coherence*Extend.
At the server side, the logs show the following message:
DEBUG Coherence:3 - 2013-02-01 11:12:20.584/85.322 Oracle Coherence GE 3.7.1.5 <D6> (thread=Proxy:TcpProxyServicePof:TcpAcceptor, member=1): Closed: TcpConnection(Id=0x0000013C953D8F150AA202D9F632E5EAFD6BDDE1A713F026C65BC1E7CC1E5952, Open=false, Member(Id=0, Timestamp=2013-02-01 11:11:44.404, Address=127.0.0.1:0, MachineId=0, Location=site:,process:1612, Role=WeblogicServer), LocalAddress=10.162.2.217:28088, RemoteAddress=10.162.2.231:45202) due to:
com.tangosol.net.messaging.ConnectionException: TcpConnection(Id=0x0000013C953D8F150AA202D9F632E5EAFD6BDDE1A713F026C65BC1E7CC1E5952, Open=true, Member(Id=0, Timestamp=2013-02-01 11:11:44.404, Address=127.0.0.1:0, MachineId=0, Location=site:,process:1612, Role=WeblogicServer), LocalAddress=10.162.2.217:28088, RemoteAddress=10.162.2.231:45202): did not receive a response to a ping within 500 millis
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer.checkPingTimeout(Peer.CDB:12)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.peer.Acceptor.checkPingTimeouts(Acceptor.CDB:7)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer.onNotify(Peer.CDB:115)
at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
at java.lang.Thread.run(Thread.java:662)
And at the client side:
ERROR (01/02/2013) 11:12:20 [threadsafe]Thread-15/AbstractComponentHandler Unable to create new instance 45067 ms
com.tangosol.net.messaging.ConnectionException: TcpConnection(Id=0x0000013C953D8F150AA202D9F632E5EAFD6BDDE1A713F026C65BC1E7CC1E5952, Open=true, Member(Id=0, Timestamp=2013-02-01 11:11:44.404, Address=127.0.0.1:0, MachineId=0, Location=site:,process:1612, Role=WeblogicServer), LocalAddress=10.162.2.231:45202, RemoteAddress=10.162.2.217:28088)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.peer.initiator.TcpInitiator$TcpConnection.send(TcpInitiator.CDB:35)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer.send(Peer.CDB:29)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer.post(Peer.CDB:23)
at com.tangosol.coherence.component.net.extend.Channel.post(Channel.CDB:25)
at com.tangosol.coherence.component.net.extend.Channel.request(Channel.CDB:18)
at com.tangosol.coherence.component.net.extend.Channel.request(Channel.CDB:1)
at com.tangosol.coherence.component.net.extend.RemoteNamedCache$BinaryCache.putAll(RemoteNamedCache.CDB:10)
at com.tangosol.util.ConverterCollections$ConverterMap.putAll(ConverterCollections.java:1708)
at com.tangosol.coherence.component.net.extend.RemoteNamedCache.putAll(RemoteNamedCache.CDB:1)
at com.tangosol.coherence.component.util.SafeNamedCache.putAll(SafeNamedCache.CDB:1)
at com.tangosol.net.cache.CachingMap.putAll(CachingMap.java:1023)
Caused by: java.net.SocketException: Write failed: Broken pipe
at jrockit.net.SocketNativeIO.writeBytesPinned(Native Method)
at jrockit.net.SocketNativeIO.socketWrite(SocketNativeIO.java:46)
at java.net.SocketOutputStream.socketWrite0(SocketOutputStream.java)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.write(BufferedOutputStream.java:104)
at java.io.DataOutputStream.write(DataOutputStream.java:90)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.peer.initiator.TcpInitiator$TcpConnection.send(TcpInitiator.CDB:27)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer.send(Peer.CDB:29)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer.post(Peer.CDB:23)
at com.tangosol.coherence.component.net.extend.Channel.post(Channel.CDB:25)
at com.tangosol.coherence.component.net.extend.Channel.request(Channel.CDB:18)
at com.tangosol.coherence.component.net.extend.Channel.request(Channel.CDB:1)
at com.tangosol.coherence.component.net.extend.RemoteNamedCache$BinaryCache.putAll(RemoteNamedCache.CDB:10)
at com.tangosol.util.ConverterCollections$ConverterMap.putAll(ConverterCollections.java:1703)
at com.tangosol.coherence.component.net.extend.RemoteNamedCache.putAll(RemoteNamedCache.CDB:1)
at com.tangosol.coherence.component.util.SafeNamedCache.putAll(SafeNamedCache.CDB:1)
at com.tangosol.net.cache.CachingMap.putAll(CachingMap.java:1023)
I can ping the client machine from the server without a problem.
Has anybody seen this before?
Edited by: 982740 on Feb 1, 2013 2:29 AM

Hi user,
It seems from the log that when the proxy node accepts your client connection the client fails to respond to a ping request down the same pipe. Does this happen consistently? If so, no putAll would ever succeed.
I have to admit I've never seen this behaviour before. I can't see how this would be a firewall port issue, as the connection has been established... the only things I can think of would be a) your weblogic client node is running way to hot and doesn't respond to the grids ping request in time, b) Some very aggressive network infrastructure is killing the connection just after its created, or c) aliens are interfering with your system.
sorry I can't be of more help,
Andy

Ssh configuration to avoid connection timeouts / broken pipes ?

I'm running irssi through screen on my server via ssh. Recently, my parents' internet connection has become very dodgy, and because of this, my terminal freezes altogether once every 15 minutes or so, and resumes with some "broken pipe" message after a very long time (around 10 minutes). I usualy just kill the terminal when I notice the freezing and open a new one with another ssh connection, but this seems to be getting more and more frequent, so it's very annoying. I was wondering if there is a way to get around this? Server configuration, client configuration, a different ssh client ... ?
By googling, I found that disabling "TCPKeepAlive" might do the trick, and so I did. It seemed to work at first, my connection was up for about half an hour, but then the same thing occured again
The sadest part of this is that by using puTTY on my phone over 3G, the connection stays up forever, but with the wired broadband, it won't stay up for more than 15 minutes
EDIT: This time I got this message: "Timeout, server <myaddress> not responding", after 29 minutes.
Last edited by pauligrinder (2011-04-24 00:50:30)

yep, this connection used to be reliable too, but now I get timeouts all the time, and also if I connect the Deluge-GTK to a daemon running on my server, it will randomly freeze and I have to reconnect to get it to work again. Luckily I'm getting out of here tomorrow
Still, it would be nice to solve this problem, because I will be coming here every once in a while... I would call the ISP and complain (I don't think the problem can be with our routers, because ssh connections inside the LAN work just fine), but because it's easter, their customer support is closed Besides, I don't know how to explain the problem to them, because most likely they won't even know what ssh is...
I tried rwd's configs, and they didn't help either. The only difference is that it seems to timeout faster now, instead of freezing the whole terminal for a long time...
Last edited by pauligrinder (2011-04-25 14:13:11)

Broken Pipe Error when using database link

We are using WebLogic 6.1 sp2 / oracle database 8.1.6. / thin drivers.
The connection works fine, unit I try to access a view that has a union and db links
in it.
We have used one or the other (view or a dblink) and it works, but when used together,
we get broken pipe error.
I haven't proven that this is the cause, I will try to setup a test, but I was wondering
if this is a known issue or what ??
thanks
Rich

You need to create the catalog views that support distributed SQL in your remote database (the database you connect to via db_link).
To create these views, connect "/ as sysdba" and run:
$ORACLE_HOME/rdbms/admin/catproc.sql
which will in turn call several other scripts including: $ORACLE_HOME/rdbms/admin/catrpc.sql (which creates your missing view)
It is best to run the whole catproc.sql script (and not just the catrpc script).
You can run and rerun catproc.sql several times quite safely.
Cheers

Broken pipe, DMLException: JBO-26061: Error while opening JDBC connection

Hi,
We are facing strange problem with oc4j903 container using bc4j getConnection() method.
We are getting the following error intermitantly using bc4j getConnection() method.
ApplicationModuleProvider JBO-30003: The application pool (bc4j_paris) failed to checkout an application module due to the following exception:
oralce.jbo.DMLException: JBO-26061: Error while opening JDBC connection.
and then it says ,
java.sql.SQLException: Io exception: Broken pipe.
It gets connection automatically in a matter of minutes.
Has anybody faced these problem or anyone has the solution please help us out.
Thanks,
Chinna

Bhaskar -- BC4J related questions are better directed to the JDeveloper forum; that's where the BC4J PMs and developers hang out.
cheers
-stevee

DMLException: JBO-26061: Error while opening JDBC connection, Broken pipe

Hi,
We are facing a strange problem with oc4j903 container using bc4j getConnection() method.
We are getting the following error intermitantly using bc4j getConnection() method.
ApplicationModuleProvider JBO-30003: The application pool (bc4j_paris) failed to checkout an application module due to the following exception:
oralce.jbo.DMLException: JBO-26061: Error while opening JDBC connection.
and then it says ,
java.sql.SQLException: Io exception: Broken pipe.
It gets connection automatically in a matter of minutes.
Has anybody faced these problem or anyone has the solution please help us out.
I appreciate your inputs.
Thanks,
Chinna

Bhaskar -- BC4J related questions are better directed to the JDeveloper forum; that's where the BC4J PMs and developers hang out.
cheers
-stevee

PL/SQL Web Service: Broken Pipe

We have successfully deployed PL/SQL Web Services on the Oracle Application Server 10g with about 6 containers. The web services are being consumed by a .NET application. All seems to be working well but we continually are having intermittent (every 2-3 days) "BROKEN PIPE" errors which is causing us to bounce the container constantly. This is not very effecient for a production environment. Does anybody have any ideas........? Here is what shows up in the log:
javax.servlet.ServletException: Io exception: Broken pipe
at swprodweb.__Ws_reservationImplSPWrapper.destroy(__Ws_reservationImplSPWrapper.java:605)
at oracle.j2ee.ws.RpcWebService.destroy(RpcWebService.java:93)
at com.evermind.server.http.ServletInstanceInfo.destroy(ServletInstanceInfo.java:127)
at com.evermind.server.http.HttpApplication.destroyServlets(HttpApplication.java:5805)
at com.evermind.server.http.HttpApplication.destroy(HttpApplication.java:5732)
at com.evermind.server.http.HttpSite.destroy(HttpSite.java:881)
at com.evermind.server.http.HttpServer.destroy(HttpServer.java:613)
at com.evermind.server.ApplicationServer.destroy(ApplicationServer.java:2033)
at com.evermind.server.ApplicationServerShutdownHandler.run(ApplicationServerShutdownHandler.java:39)
at java.lang.Thread.run(Thread.java:534)
So everytime I see this error I know that we have to bounce the container. Very Frustrating!!

Hi,
Although it's a long time since you posted your message, I nowadays working with this issue, that is, calling web services from Oracle database 10g through UTL_DBWS package. It turns out that almost 3 of 100 requests fail due to this error (broken pipe). Actually, the trace is:
ERROR on line 1:
ORA-29532: Java call finished due to an unresolved exception: HTTP
transport error: javax.xml.soap.SOAPException:
java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message
send failed: send failed
Broken pipe
ORA-06512: en "SYS.UTL_DBWS", línea 403
ORA-06512: en "SYS.UTL_DBWS", línea 400
I'm looking for the cause of this error. Has anyone any idea about this?
Thanks a lot.
Luis Serrano.

OS X 10.8.3 Mail Quits with launchd Exited abnormally: Broken pipe: 13

Hello,
I'm using OS X Mail in Mountain Lion and it keeps quitting in the middle of me typing. The "Broken Pipe" error message I'm seeing in console is listed below. I have 3 accounts created in Mail: Exchange Account for Work, iCloud (IMAP) and Yahoo! (IMAP). I didn't have issues until I started using the Exchange account for work.
Anyone have any ideas for how to resolve this issue?
Thanks!
5/24/13 8:23:56.202 AM com.apple.launchd.peruser.503[412]: ([0x0-0x2186184].com.apple.mail[34681]) Exited abnormally: Broken pipe: 13

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Snow Leopard unusable with Broken Pipe messages in the console

Hello
Recently, probably after having installed OS X 10.6.8, I noticed that after a while, something within the OS becomes saturated leading to no new processes being able to be started. All existing programs continue to run and all seems normal except if a running program needs to call another program (e.g., Mail needing to fetch a password from Keychain Access).
The console then becomes awash with broken pipe messages and a whole bunch of error logs are created for various programs.
This is causing me great irritation as everytime I am forced to restart the machine (sometimes by forcing a hard-reboot).
I would really appreciate any help on this matter. I would rather not have to completely re-install the OS if I can help it.
The following is a typical excerpt from the system.log:
Oct 29 13:00:11 mbpag activitymonitord[519]: Request failed: Broken pipe
Oct 29 13:00:11 mbpag Activity Monitor[497]: Error communicating with activitymonitord - ipcErr = 1
Oct 29 13:00:11 mbpag /System/Library/Frameworks/QuickLook.framework/Resources/quicklookd.app/Content s/MacOS/quicklookd[40918]: SessionGetInfo(0xffffffff) -> Mach 1102
Oct 29 13:00:12 mbpag quicklookd[40918]: [QL] Can't remove user interaction with Security framework: 226
Oct 29 13:00:12 mbpag /System/Library/Frameworks/QuickLook.framework/Resources/quicklookd.app/Content s/MacOS/quicklookd[40918]: SessionGetInfo(0xffffffff) -> Mach 1102
Oct 29 13:00:12 mbpag /System/Library/Frameworks/QuickLook.framework/Resources/quicklookd.app/Content s/MacOS/quicklookd[40918]: GetOurLSSessionIDInit(), returned error 0xe2, securitySessionID=0x0 attrs=0 uid=501 euid=501. cf Radar 5123589.
Oct 29 13:00:12 mbpag /System/Library/Frameworks/QuickLook.framework/Resources/quicklookd.app/Content s/MacOS/quicklookd[40918]: LaunchServices: GetOurLSSessionIDInit() returned err #226, securitySessionID == 0x0, vers=10600000 uid=501 euid=501
Oct 29 13:00:12 mbpag /System/Library/CoreServices/ReportCrash[40919]: SessionGetInfo(0xffffffff) -> Mach 1102
Oct 29 13:00:12 mbpag /System/Library/CoreServices/ReportCrash[40919]: GetOurLSSessionIDInit(), returned error 0xe2, securitySessionID=0x0 attrs=0 uid=501 euid=501. cf Radar 5123589.
Oct 29 13:00:12 mbpag /System/Library/CoreServices/ReportCrash[40919]: LaunchServices: GetOurLSSessionIDInit() returned err #226, securitySessionID == 0x0, vers=10600000 uid=501 euid=501
Oct 29 13:00:12 mbpag /System/Library/CoreServices/ReportCrash[40920]: SessionGetInfo(0xffffffff) -> Mach 1102
Oct 29 13:00:12 mbpag /System/Library/CoreServices/ReportCrash[40920]: GetOurLSSessionIDInit(), returned error 0xe2, securitySessionID=0x0 attrs=0 uid=501 euid=501. cf Radar 5123589.
Oct 29 13:00:12 mbpag /System/Library/CoreServices/ReportCrash[40920]: LaunchServices: GetOurLSSessionIDInit() returned err #226, securitySessionID == 0x0, vers=10600000 uid=501 euid=501
Oct 29 13:00:12 mbpag com.apple.launchd.peruser.501[452]: catch_mach_exception_raise_state_identity(): PID: 40920 thread: 0x13d07 type: 0xa code: 0x1000f8044 codeCnt: 0x2 flavor: 0x1000f8054 old_state: 0x1000f805c old_stateCnt: 0x2c new_state: 0x1000f702c new_stateCnt: 0x1000f7028
Oct 29 13:00:12 mbpag com.apple.launchd.peruser.501[452] (com.apple.ReportCrash.Self[40920]): Job appears to have crashed: Abort trap
Oct 29 13:00:12 mbpag com.apple.launchd.peruser.501[452] (com.apple.ReportCrash[40919]): Job appears to have crashed: Abort trap
Oct 29 13:00:13 mbpag com.apple.ReportCrash.Root[40921]: 2011-10-29 13:00:13.015 ReportCrash[40921:2803] Saved crash report for ReportCrash[40919] version ??? (???) to /Library/Logs/DiagnosticReports/ReportCrash_2011-10-29-130012_localhost.crash
Oct 29 13:00:13 mbpag com.apple.launchd.peruser.501[452] (com.apple.quicklook[40918]): Job appears to have crashed: Abort trap
Oct 29 13:00:13 mbpag /System/Library/Frameworks/QuickLook.framework/Resources/quicklookd.app/Content s/MacOS/quicklookd[40924]: SessionGetInfo(0xffffffff) -> Mach 1102
Oct 29 13:00:13 mbpag quicklookd[40924]: [QL] Can't remove user interaction with Security framework: 226
Oct 29 13:00:13 mbpag /System/Library/Frameworks/QuickLook.framework/Resources/quicklookd.app/Content s/MacOS/quicklookd[40924]: SessionGetInfo(0xffffffff) -> Mach 1102
Oct 29 13:00:13 mbpag /System/Library/Frameworks/QuickLook.framework/Resources/quicklookd.app/Content s/MacOS/quicklookd[40924]: GetOurLSSessionIDInit(), returned error 0xe2, securitySessionID=0x0 attrs=0 uid=501 euid=501. cf Radar 5123589.
Oct 29 13:00:13 mbpag /System/Library/Frameworks/QuickLook.framework/Resources/quicklookd.app/Content s/MacOS/quicklookd[40924]: LaunchServices: GetOurLSSessionIDInit() returned err #226, securitySessionID == 0x0, vers=10600000 uid=501 euid=501
Oct 29 13:00:13 mbpag com.apple.launchd.peruser.501[452] (com.apple.ReportCrash): Throttling respawn: Will start in 9 seconds
Oct 29 13:00:13 mbpag com.apple.ReportCrash.Root[40921]: 2011-10-29 13:00:13.426 ReportCrash[40921:2f03] Saved crash report for quicklookd[40918] version ??? (???) to /Library/Logs/DiagnosticReports/quicklookd_2011-10-29-130013_localhost.crash
Oct 29 13:00:13 mbpag activitymonitord[519]: Request failed: Broken pipe
Oct 29 13:00:13 mbpag Activity Monitor[497]: Error communicating with activitymonitord - ipcErr = 1
Oct 29 13:00:15 mbpag activitymonitord[519]: Request failed: Broken pipe
Oct 29 13:00:15 mbpag Activity Monitor[497]: Error communicating with activitymonitord - ipcErr = 1
Oct 29 13:00:17 mbpag /Applications/Firefox.app/Contents/MacOS/plugin-container.app/Contents/MacOS/pl ugin-container[40931]: SessionGetInfo(0xffffffff) -> Mach 1102
Oct 29 13:00:17 mbpag /Applications/Firefox.app/Contents/MacOS/plugin-container.app/Contents/MacOS/pl ugin-container[40931]: GetOurLSSessionIDInit(), returned error 0xe2, securitySessionID=0x0 attrs=0 uid=501 euid=501. cf Radar 5123589.
Oct 29 13:00:17 mbpag /Applications/Firefox.app/Contents/MacOS/plugin-container.app/Contents/MacOS/pl ugin-container[40931]: LaunchServices: GetOurLSSessionIDInit() returned err #226, securitySessionID == 0x0, vers=10600000 uid=501 euid=501
Oct 29 13:00:17 mbpag activitymonitord[519]: Request failed: Broken pipe

sangak wrote:
I was hoping I'd get a magic solution instead of the dreaded OS reinstall.
That is the magic solution, it gives you a new OS X copy which you immediately update, leaves all your files and programs alone. (unless they have kernel extensions and you need to update those programs)
It's fast, easy and simple, it's Lion "overwrites" that are a pain because it needs the Internet.
There is only one person here that spends his time analyzing such under the hood details and usually has to tell you what I'm saying anyway because that's the only way to correct it.
I'm trying to get you done and out of my way and you back to your life.
I must say that I am quite disappointed with the kernel failing in this way - it is not really in keeping with the robust/Unix reputation...
Don't know what the problem is, it is very robust, but hard drives are based on magnetic bits and those bits fail, the best OS in the world can't stand up if the chair it's standing on is kicked out from underneath it.
OS X only takes 4.5GB, Apple could have incorporates a automatic recovery parttion check upon boot and restored OS X if if didn't boot, but they didn't do that.
Then when they have to place a recovery partiton like in Lion as they are phasing out the optical drive, they make one get online to get a new copy of OS X.
How stupid is that?

Exception writing binary data to the output stream to client -Broken pipe

Hi,
I am trying to use the drag & drop feature using Contributor mode of Webcenter sites. Single Image Page Attribute is working properly where as Multiple Image Page Attribute throws the following error:
[ERROR] [.kernel.Default (self-tuning)'] [logging.cs.satellite.request] Exception writing binary data to the output stream to client 10.191.117.106
java.net.SocketException: Broken pipe
     at java.net.SocketOutputStream.socketWrite0(Native Method)
     at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
     at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
     at weblogic.servlet.internal.ChunkOutput.writeChunkTransfer(ChunkOutput.java:568)
     at weblogic.servlet.internal.ChunkOutput.writeChunks(ChunkOutput.java:539)
     at weblogic.servlet.internal.ChunkOutput.flush(ChunkOutput.java:427)
     at weblogic.servlet.internal.ChunkOutput$2.checkForFlush(ChunkOutput.java:648)
     at weblogic.servlet.internal.ChunkOutput.write(ChunkOutput.java:333)
     at weblogic.servlet.internal.ChunkOutputWrapper.write(ChunkOutputWrapper.java:148)
     at weblogic.servlet.internal.ServletOutputStreamImpl.write(ServletOutputStreamImpl.java:148)
     at COM.FutureTense.Servlet.ServletRequest$OutputOutputStream.write(ServletRequest.java:80)
     at COM.FutureTense.Servlet.ServletRequest.write(ServletRequest.java:1633)
     at com.openmarket.Satellite.RequestContext.write(RequestContext.java:1123)
     at com.openmarket.Satellite.BytePiece.stream(DataPiece.java:253)
     at com.openmarket.Satellite.CacheObjectImpl.stream(CacheObjectImpl.java:651)
     at com.openmarket.Satellite.Http11Responder.respondForWrapper(Http11Responder.java:142)
     at com.openmarket.Satellite.WrapperAwareResponder.respond(WrapperAwareResponder.java:36)
     at com.openmarket.Satellite.SatelliteServer.execute(SatelliteServer.java:85)
     at com.openmarket.Satellite.servlet.BaseServlet.doGet(BaseServlet.java:118)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.fatwire.wem.sso.cas.filter.CASFilter.doFilter(CASFilter.java:557)
     at com.fatwire.wem.sso.SSOFilter.doFilter(SSOFilter.java:51)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Thanks
KarthiK

Thank u very much,
     FileOutputStream opGif = new FileOutputStream(destFile, false);
I have changed above line with the following line:
     PrintWriter opGif = new PrintWriter ( new FileWriter(destFile, false));
and now this code is working very fine.
Thanks once again...

Warning - Broken Pipe

Similar Messages

Maybe you are looking for