Warning by NAC when a new Pcs connecte to the network
Hi All,
I have a NAC is configured to authenticate users through the NAC by local BD and just use vlan mapping mac-address filter list.
I would like to control new Pcs connection to the network ; when a new mac-address -- PC ,laptop or any other mac based device is connected , then The NAC Monitoring should be make an alert or a warning to the " Network admin ". Thereby the Network Admin is more active in monitoring whole network.
Any good solutions, suggestions are many appriciations from my heart!!!
Hi,
if you are into the mac address monitoring I think the NAC profiler is made for you.
It can recognize hundreds of kind of devices from their behavior (DHCP, ARP, ...) and it classifies any device you plug on the network. You can even make custom rules if you have very specific products.
So you can determine "Cisco 9971 phones will go to this vlan" and any 9971 phone you bring in the future will be added in the NAC list.
It can also do this "monitoring" you are talking about, you can put any new mac address in a special category. And from there Profiler shows you its location and current behavior (what profiler thinks it is).
Nicolas
====
Please rate answers that you find useful
Similar Messages
-
My ipod touch is brand new and i just made my apple account and when i try to connect to the app store or imessage it cant connect please help
Try here:
Can't connect to the iTunes Store
Try changing he DNS to Google's 8.8.8.8 -
When I enter my password to start my atv it tells me, that "there was a problem connecting to the network." My Ipad works fine in my house, but not my new atv. I have reset my password multiple times with no help. I have also rebooted my wireless server. Do I take it back?
Where is everyone???? Does anyone have an answer???
Allik1 -
When I try to connect to the wi-fi net work at my work place on my new iPad 3 I get a message, "unable to join the network". I have verified the password, so I know it is correct. I know the wi-fi works, because I can connect at home. I have already tried the following:
turn wi-fi off and on again
did a hard restart of my iPad
reset network connections back to factory settings
verified wi-fi is working as my computer accesses internet without issue.
verified that my software is up to date.
Does anyone have more suggestions?Couple of suggestions.
First, many companies have a gateway on their networks that block non approved devices. I work in such a place. You might check with an IT guy , and see if they have a block in place.
Second, the message you are getting means that you have not negotiated the security settings. So either the password is wrong ( case sensitive), or, in some cases, they want a network key as opposed to your normal password.
Again, if you can find one, talk to an IT guy and see if he has some suggestions. -
I am in turkey. Just bought a new Turkcell SIM card for my iphone3gs. When I try to connect to Turkcell network, it says that the selected network is restricted however the sim works in ordinary phones. Can you help please.
If a phone is sold from one friend to another and wants to use it on a different carrier the friend can contact the carrier it was sold by to request it unlocked. I know AT&T, Verizon, and Sprint will give you the steps to unlock it as long as the original contract it was bought under has been completed. eBay/Craigslist is really not the best place to try to get "unlocked phones" from, if it turns out the phone isn't unlocked then I'm really sorry you got stuck with that one and as stevejobsfan said above I would report them immediately and see if you can recover your money. I sell phones for a living and this happens a lot
-
Can anyone please help! I haven't been able to connect to the iTunes store to purchase music for some time now. When I click on the iTunes icon my music library appears, but when I try to connect to the store (top RH side of window) I get a new window saying cannot connect to the store an erroe -3221 has occured.
Baseal wrote:
When I use her Earthlink email address to download apps or whatnot, it says I can't access teh itunes store.
When you say "her email address" do you mean that you set up a separate Apple ID for her using her email address as her Apple ID? If so, was it ever verified by Apple? Did she get the email verification?
You might look here for some help.
http://www.apple.com/support/appleid/ -
When trying to use the apps message received is not connected to the network
My printer is connected and I can print from the ipad and the laptop, but when I try to use one of the apps to print something. I get an error message that the printer in not connected to the network. I have tried all the trouble shooting tips and when printing out the wireless network test results, it says no problems found. Please help, this is a brand new printer purchased on 08/30/2012.
I believe I have the same problem. I get "Server Connection Error: -1". This only occurs on weekends (Sunday). Is this because someone turns off the server on the weekends?
There is nothing available to describe what this error message means. -
My iphone 5 won't make a call when i fail to connect to the internet via 3g
My iphone 5 won't call when i fail to connect to the internet via 3g.
At work i dont have wifi i have 3g, if i launch say the sky go app,or the iplayer, sometimes they work and everything is fine...sometimes they wont load as 3g for whatever reason cant get a connection at that particular time........ if i then try and make a call the call will fail. I've experimented 25 + times and this is definately the cause.
(note: when the 3g connection does work, the phone has absolutely no problem calling people)
Anyone had this problem?
Even better has anyone got a solution?
Thanks,
Nick.Are you sure that the carrier's signal is strong where you are having this problem? Certain building structures and locations have poor cellular signal strength and this often results in the "No Service" indication. Are other users able to get service in the same locations where you have problems?
-
my ipod touch just shows the charge symbol on the screen and i checked whether there is a problem in the charger but it works perfectly on my iphone 4 and when my ipod is connected to the computer itunes is not recognising my device pls help me
tmplHi pranoop,
If you are having an issue with your iPod touch not being recognized by iTunes when connected to your Windows computer, I would suggest that you troubleshoot using the steps in this article -
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
At home, I can connect my iPhone 5 to my home wifi network with no problems, as long as I stay downstairs.
As soon as I go upstairs my phone disconnects from the network. I can still see the home network it in the available network lists (with full signal strength), but when I try to reconnect I get an 'unable to connect to the network message'
If I move back downstairs it reconnects
This has only started happening in the past week or so
I've tried to forget and rejoin the network, but this doesn't work
I reset my network settings on the phone. This worked for a couple of hours and I could connect to the wifi upstairs, but now it won't connect again.
Does anyone have any ideas what is causing this?Sounds like your wi-fi signal strength has degraded. Try rebooting your wi-fi router, or get it serviced.
Do you have similar issues with any other wi-fi routers? -
i just downloaded iTunes for my Windows 8 laptop and get an error message when i try to connect to the iTunes store (-3212)
Hello Steve,
Thank you for the details of the issue you are experiencing with the iTunes Store. I recommend the following steps for error (-3212):
"Error 3000" through "3999"
Alerts with codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, or due to your Internet proxy settings. If you are using a proxy, try removing the proxy settings, or using a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues.
Find the full article at the following link:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I have tried to update my iPod Touch 4G to the latest update, I currently have iOS 4.1. After the 4 hours an error message appears saying iTunes had lost connection even when I am fully connected to the internet. I have repeated the update 4 times now with not luck. Any ideas?
Thanks in advance
AdamIf you get a network timed out error, try disabling the security software on the computer during the download and install.
You can also try a direct download andinstall by:
iPod, iPhone and iPad Firmware Download
Nera the top of the page aretheinstructions for selecing the download for the install. -
When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone. This previously worked, but has randomly stopped working. help!
I took my iPhone to the Service center of M/s RSG INFOTECH PRIVATE LIMITED on April 17, 2014.
Why are you posting in this forum about what occured with an independent service provider? How is is at all relevant to Apple?? In fact, service by any person or business not authorized by Apple voids any waranty. -
When I try to connect to internet wirelessly (Parallels/Windows 7 on my Mac Pro) I get a drop down that says "Real Network adapter thunderbolt bridge used by virtual adapter 1 is not connected to the network". I can not figure out how to connect - any help is appreciated!
Since you are having trouble with Parallels or Windows, did you ask in their respective support forums? If not, you might want to consider doing so.
-
When I tried to hook up my macbook pro to a projector and play a dvd, the dvd wouldn't work. I would only get an error message. The dvd worked when it wasn't connected to the projector but doesn't work when it's connected. It just shows a blank screen as if it's trying to connect. Also, the connection works when I don't play the dvd. Any ideas?
Hey there lynmrigg,
It sounds like have an HDMI to VGA adapter connecting your MacBook Pro and your projector but the screen on your computer goes black and no image appears on the projector. I would use the troubleshooting in the following article to help resolve or isolate the issue here, named:
Apple computers: Troubleshooting issues with video on internal or external displays
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Take care,
Sterling
Maybe you are looking for
-
I am running Safari 5.1.9 on OS X 10.6.8. For the last few days, Safari windows always open at exactly the same size, and there is nothing I can do to resize them. The resize button in the bottom right corner doesn't respond. The green maximise but
-
Itunes won't recognize my new ipod
I gave my cousin a new 3rd gen nano. Itunes is fine but the device simply shows an ipod and brings up the agreement. the choice is 'save' or 'cancel.' cancel does nothing and save sends me to a save as a doc. i've updated both itunes and ipod softwar
-
Fuzzy text / pics from new mac mini using Samsung TV
I'm using a Samsung 420p TV as a monitor, connected via HDMI cable. Looks perfect on my older PC. Any suggestions?
-
Photoshop CS5 Repousse Slow/ material plugins?
Two questions: 1. Just installed CS5 upgrade today from CS4, excited about the new Repousse feature. I opened Photoshop 64 Bit, made some text, went to Repousse, and any change to 3d text had a 15 second wait. Not sure why this is running slow, any
-
I can't send pictures using iMessage from my iPod (iOS 6)
Before updating to the new update (iOS 6) iMessage was working perfectly but since I installed the new update I can't send pictures from iMessage anymore, sonebody please help me I don't what to do anymore