WARNING : CAN NOT ALLOCATE BLOCK FOR THE EVENT !

Im developing a packet filtering program on Solaris 2.6. When program is executed for a while this warning message appreas :
WARNING : CAN NOT ALLOCATE BLOCK FOR THE EVENT !
and screen gets frozen,
if please somebody knows when and why this message appears, please help...
Thanks in advance,
emre celebi
[email protected]

Similar Messages

Error Message: Can not generate mask for the LMB peripherals

I've added a bunch of perhipherals to my microblaze project and used the Generate Addresses button. I get the below error messges when I try to generate a net list. ERROR:EDK:3193 - issued from TCL procedure
   "::hw_lmb_bram_if_cntlr_v2_10_b::update_syslevel_mask" line 88
    C_MASK (IPNAME:lmb_bram_if_cntlr, INSTANCE:ilmb_cntlr) - Can not generate
   mask for the LMB peripherals! An address decode mask is assigned to all LMB
   peripherals connected to the MicroBlaze processor. The address decode mask is
   based on a set of decode bits that distinguish the LMB address space from the
   OPB/PLB address space. The error message indicates that a set of decode bits
   can not be found to generate a mask. Please modify the address map of the
   slaves connected to OPB/PLB to use a common address bit.
ERROR:EDK:1585 - IPNAME:lmb_bram_if_cntlr INSTANCE:ilmb_cntlr -
   E:\Xilinx\11.1\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v2_10_b\d
   ata\lmb_bram_if_cntlr_v2_1_0.mpd line 77 - error computing override value for
   C_MASK using tcl
ERROR:EDK:3193 - issued from TCL procedure
   "::hw_lmb_bram_if_cntlr_v2_10_b::update_syslevel_mask" line 88
    C_MASK (IPNAME:lmb_bram_if_cntlr, INSTANCE:dlmb_cntlr) - Can not generate
   mask for the LMB peripherals! An address decode mask is assigned to all LMB
   peripherals connected to the MicroBlaze processor. The address decode mask is
   based on a set of decode bits that distinguish the LMB address space from the
   OPB/PLB address space. The error message indicates that a set of decode bits
   can not be found to generate a mask. Please modify the address map of the
   slaves connected to OPB/PLB to use a common address bit.
ERROR:EDK:1585 - IPNAME:lmb_bram_if_cntlr INSTANCE:dlmb_cntlr -
   E:\Xilinx\11.1\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v2_10_b\d
   ata\lmb_bram_if_cntlr_v2_1_0.mpd line 77 - error computing override value for
   C_MASK using tcl I understand its complaining about the mask values, but I'm not exactly sure why. Here is the address map it shows:Address Map for Processor microblaze_0
(0000000000-0x00003fff) dlmb_cntlr    dlmb
(0000000000-0x00003fff) ilmb_cntlr    ilmb
(0x81800000-0x8180ffff) xps_intc_0    mb_plb
(0x81c00000-0x81c0ffff) xps_ll_temac_0    mb_plb
(0x83400000-0x8340ffff) Generic_SPI    mb_plb
(0x83c00000-0x83c0ffff) xps_timer_0    mb_plb
(0x84000000-0x8400ffff) RS232    mb_plb
(0x84400000-0x8440ffff) mdm_0    mb_plb
(0x8c000000-0x8fffffff) mpmc_0    mb_plb
(0xfffff000-0xffffffff) xps_gpio_0    mb_plb Any thoughts? I was unable to find another instance of this error message.

Version 11.3 I actually figured it out, its rather odd that the generate addresses button doesn't do this automatically. It appears that the mask was set to trigger use of the cache on a single bit. 0x00800000. I had enough devices added where automatic address generation was using the most significant bit meaning that bit was falling within other address spaces. I changed it to 0xFFFFC000. (Basically telling it to match addresses if all address signals above 16KB are zero). I don't know if that is the proper way to do it, but it accepted it. Now I'm fighting with some stuff regarding an FSL bus I added that apparently isn't quite properly setup, so I haven't found out yet if the processor likes that address mask. But the tools appear to like it.

I have bought the CS5 but can not find serialnumbers for the whole suit. Only for PS.

I have bought the CS5 but can not find serialnumbers for the whole suit. Only for PS.

Hi,
Which CS5 suite have you purchased?
This document has guidelines on locating your serial number depending on the mode of delivery of your purchase:
Find a Serial Number
You also mention that you are able to locate the serial number for Photoshop. Did that come as a part of the suite or did you purchase Photoshop as a standalone application?

I can not find games for the ipod nano 4 genoration. Can someone help?

I can not find games for the ipod nano 4 genoration. Can someone help?

Use the instructions in this Apple support document to locate games in the iTunes Store.
http://docs.info.apple.com/article.html?path=iTunesWin/9.2/en/15474.html
B-rock

I bought a MacBook Pro I can not sign up for the updates, because I do not have credit card. Only own debit card, but the system does not accept. What can I do?

I bought a MacBook Pro I can not sign up for the updates, because I do not have credit card. Only own debit card, but the system does not accept. What can I do?

You do not need to "sign up" for downloading updates. Just run Software Update and let it access them directly thru the App Store.

I had a 3rd Gen iPad. I did not get the pictures off of it. They are all in iCloud, I can not find out for the life of me how to get them off of iCloud without the iPad that I do not have anymore, I sold it. Any help would be epic. Thank you in advance!

I have an iPhone 5 now that is also in my iCloud, yet it won't let me access the iPad iCloud.
I would love to have all the pictures from the iPad iCloud backup.

Really?? No one knows??
This is an Apple support forum is it not?
If anyone can at least point me in the right direction that would be great!!

Can not install software for the camera on my G10

Hello
New poster today seems my CD/DVD media drive has stopped working, tried to install software for new camera, just getting blue screen and a small flashing disc, seems there is no power in drive.
Any advice welcome only had machine since late June 2005.Am I doing something wrong or does it sound like a service problem
THANK YOU!
JIM.

Hi
Well like xaver said it could be a hardware problem but before you contact the ASP try to remove the drive from the device manager. After new reboot the OS should recognizes the driver again. Maybe this procedure will help you to solve this problem. But if not, please contact the service partner
Bye

I forgot My iCloud password, and i can not reset it as the system is not accepting the answer to the security questions and also the mail to my apple ID mail box is blocked, how can i reset my password for my apple ID.

I forgot My iCloud password, and i can not reset it as the system is not accepting the answer to the security questions and also the mail to my apple ID mail box is blocked, how can i reset my password for my apple ID.

Hello nmssns,
Thank you for contacting Apple Support Communities.
You can start with this article to reset your iCloud password. Depending on your exact circumstances, blocked email, forgot security questions, etc., there are links provided to guide you through those issues.
About Apple ID security questions
http://support.apple.com/kb/HT5665
Regards,
Jeff D.

I can see my thumbnails for my events in iphoto, but when I click to open the folder, no photos show up. However, when I hover over the thumbnail, it shows the flicker of images that should be inside the folder, as well as

I can see my thumbnails for my events in iphoto, but when I click to open the folder, no photos show up. However, when I hover over the thumbnail, it shows the flicker of images
that should be inside the folder, as well as # of images in each folder. It also occasionally says the following when I try to even open iphoto: "Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete." So, I am scared to hit "upgrade" for fear I will never recover any of the images as the wording in this quote seems odd. The photos are not in the trash. Did I lose them all? Do you know if/how I can retrieve them?

iPhoto 08?
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

The merge process could not allocate memory for an operation; your system may be running low on virtual memory. Restart the Merge Agent.

I encountered this problem on our SQL2012 and I have tried different scenarios (see below) to no avail. I have decided to give up and check if someone here has encountered this and resolved it.
One thing I know, it's not a memory issue. Both servers we're using has lots of memory to spare and we monitor the memory as the replication goes through it's steps.
I hope someone can help me on this. Thanks!
The Error:
The merge process could not allocate memory for an operation; your system may be running low on virtual memory. Restart the Merge Agent.
Our Scenario
We're using SQL Server 2012 SP1. All subscriptions are pull based.
We're using direct Merge Replication (not FTP or web sync)
We already have 10 active replications with larger databases. Only 1 has this issue.
Database size is less than 5 GB
Rebuilding the publisher is not an option.
What have I tried?
There is no memory problem --- we have lots to spare
I have tried re-initialization of the database. Same problem.
I tried deleting the database and reinitializing it. Same problem
New snapshot. Same problem.
I tried changing the subscriber server but still same issue.
MCP, MCSD, MCDBA (ANXA)

Here is the result for the sp_configure on our subscriber. We're doing a pull on the server with the issue.
name
minimum
maximum
config_value
run_value
max server memory (MB)
128
2147483647
2147483647
2147483647
In addition, I made a comparison between the working servers and the one with the issue -- there seems to be a difference in the service pack. Publisher has none but the subscriber is operating on SP1. But still strange as only 1 database is affected.
MCP, MCSD, MCDBA (ANXA)

My ipad says can not allocate memory when trying to log on the net

After loading music on my ipad2 I can not log on to the web. It says cannot open the page. The error was: "The operation couldn't be completed. Cannot allocate memory". Does anyone know how to fix this issue?

Close all Inactive Apps
1. Double-click the Home button to see all Inactive Apps
2. Hold the Apps down for a second or two until you see the minus sign
3. Tap the minus sign to close App
4. Reset iPad. Hold the Sleep and Home button down for about 10 second until you see the Apple logo

Could not allocate space for object temporary system object: ... in database 'tempdb' because the 'PRIMARY' filegroup is full.

Using SQL Server 2008 R2. Tempdb resides on disks W and X
both of those are 250 GB each. Nothing else resides on these disks. The recovery mode for tempdb is set to Simple and is split in 8 files and one log file. Each of the tempdb file is set for auto growth by 128 MB and max size is unlimited. The log file is
set for auto growth by 10% and max size unlimited.
I get the following error at least once a week while running an ETL:
[SQLSTATE 01003] (Message 8153) Could not allocate space for object '<temporary system object: 335532118192937>' in database 'tempdb' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup,
adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup. [SQLSTATE 42000] (Error 50000). The step failed.
I have to then shrink the tempdb log and files to create space on the disks.
What is a permanent solution to this problem, I don't want my ETL to break due to TempDB diskspace full.
Thanks in advance.

Hi,
Permanent solution would be finding out query which is causing tempdb log file to grow out of proportion and fill it and I would like you to take help of below article
Troubleshooting out of space issue in Tempdb
Please change Autogrowth value for Log file from 10 % to may be 100 M. This is just a tentative value you need to study
growth of tempdb to reach to correct value. You kept 128 MB autogrowth for tempdb data file is this value tentative or you just put it.
Below article can be referred for tempdb details
Working with tempdb
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Can not compose an aggregation EPCIS event for stanalone EPC(s)

Hi ,
We are facing problem while posting packing event in SAP OER .
Error as below :-
"Can not compose an aggregation EPCIS event for stanalone EPC(s)".
We are performing aggregation event while packing the secondary product to tertiary product.
Thanks
Surekha

Hi Surekha Dhumal,
Usually EPC attributes are case sensitive. Please check if all the EPC attributes match the configuration.For example "ContainerID" attribute, SAP AII can not recognise "containerID"/"ContainerId"/...etc.
If you can share the EPCIS message content it would be easy to identify the issue.
Regards,
BRV.

Data folder can not be opened in finding " AirPort Time Capsule " The operation can not be completed because the original item for " data" does not exist .

Hi
I have a " AirPort Time Capsule " (firmware 7.7.3) When I try to open the data folder in "finder". Then I got the message " The operation can not be completed because the original item for " data" does not exist". I have a lot of data and I can understand why I get this message?
Anyone who can help? Thanks..
Br. Bo

Get a USB drive of 2TB or more.. assuming your TC is 2TB. Either preformatted Mac or plug into your Mac and format it standard Mac OS Extended Journaled in disk utility.
Do a full archive of the TC. You do this using airport utility. Do not click the erase disk.. I marked in green.. just the archive.. that is to backup the internal disk to the USB disk. It is not fast.. take it that the process will go at around 40-50GB/hr.
Once you complete the archive .. it is a direct image of the data on your TC.. you can then plug it into your computer directly.. and then try and open the files you lost.. if you cannot open them.. open disk utility and fix the permissions.
http://osxdaily.com/2015/01/13/repair-disk-permissions-mac-os-x/
Or try the methods apple recommends..
OS X Yosemite: Set permissions for items on your Mac
It is possible to fix things on the USB drive because it is locally mounted.. but you cannot fix it on TC which is network drive.

HT5429 direction is not coming in IOS 6 in india. can someone help me for the same?

direction is not coming in IOS 6 in india. can someone help me for the same? i'm using iphone 4

Hi Civilclerk1,
In order to achieve your requirement, we can try to use the following expression to instead the last_name column and first_name field:
last_name: =iif(Fields! staff_role.Value="Lead Atty" or Fields! staff_role.Value="BK Mgr" or Fields! staff_role.Value="Partner" ,Fields! last_name.Value,nothing)
first_name: =iif(Fields! staff_role.Value="Lead Atty" or Fields! staff_role.Value="BK Mgr" or Fields! staff_role.Value="Partner" ,Fields! first_name.Value,nothing)
Besides, if we don’t want see the blank row in the tablix, we can add a filter as below in the tablix:
Expression:=iif(Fields! staff_role.Value="Lead Atty" or Fields! staff_role.Value="BK Mgr" or Fields! staff_role.Value="Partner" ,1,0)
Operator:=
Value:=1
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

WARNING : CAN NOT ALLOCATE BLOCK FOR THE EVENT !

Similar Messages

Maybe you are looking for