Warning could not carry out all normings
Hi Experts,
why would a user get the following error in BEx?
"warning could not carry out all normings"
Thanks
Dave
Hi,
I think in this case there might have been norming set up in the query, or that some one accidentally set the norming on in the calculation. You can always switch this off at the workbook. At any query cell, right-click > ALL CHARACTERISTICS > NORMALIZE > NO NORMALIZATION. The error should then go away.
Cheer,
Gimmo
Similar Messages
-
Could not carry out your request as the active layer is empty (error message)
Hi
I keep getting this message when I try to do the most basic of manual quick adjustments to a simple photo in elements.
Any idea what it means and how I get rid of it!?
thanksTry resetting preferences.
For older versions of PSE:
Press and hold Alt-Ctrl-Shift immediately after Elements begins launching. Click Yes to delete the Adobe Photoshop Elements settings file.
For more recent versions of the program, go to Edit>Preferences>General and look for this: -
A Global Catalog Server could not be located - All GC's are down SBS 2011
I have been searching through these forums and manage to find similar errors but am struggling to find an answer that applies to this me.
I seem to be having a number of issues with our SBS. I believe this was originally domain was previously on a SBS 2003 box before being moved to this SBS 2011 box last year, it has been running fine until yesterday. I cant see anything that has changed then
though.
Everything seems to point to DNS although I am struggling to pinpoint the actual cause. The most worrying is when I try to open something on the SBS such as AD sites and services.
the error is
Active Directory Domain Services - Naming information cannot be located because: The specified domain either does not exist or could not be contacted. Contact your system administrator to verify that your domain is properly configured and
is currently online.
Here is the IPconfig/all from the server
v
Host Name . . . . . . . . . . . . : SBS2012
Primary Dns Suffix . . . . . . . : Contosso.local
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : Contosso.local
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82575EB Gigabit Network Connecti
on #2
Physical Address. . . . . . . . . : 00-1E-67-39-23-14
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::8087:34f0:59f9:6a26%12(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.35.250(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.35.1
DHCPv6 IAID . . . . . . . . . . . : 301997671
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-39-46-22-00-1E-67-39-23-15
DNS Servers . . . . . . . . . . . : 192.168.35.250
NetBIOS over Tcpip. . . . . . . . : Enabled
PPP adapter RAS (Dial In) Interface:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : RAS (Dial In) Interface
Physical Address. . . . . . . . . :
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.35.24(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{6E06F030-7526-11D2-BAF4-00600815A4BD}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{A23E95B8-B5C2-4D88-BDE9-E9F1C2DD3902}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
and here is the nltest
nltest /server:sbs2012 /dsgetdc:contosso.local
DC: \\SBS2012.contosso.local
Address: \\192.168.35.250
Dom Guid: c50b6df3-9d22-4c87-b2a7-adadc4fd5ec1
Dom Name: contosso.local
Forest Name: contosso.local
Dc Site Name: Default-First-Site-Name
Our Site Name: Default-First-Site-Name
Flags: PDC GC DS LDAP KDC TIMESERV GTIMESERV WRITABLE DNS_DC DNS_DOMAIN
DNS_FOREST CLOSE_SITE FULL_SECRET WS
The command completed successfully
As far as I can see everything so far looks ok (highly possible I am missing something) but when I run a DCDIAG it gets messy
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = SBS2012
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\SBS2012
Starting test: Connectivity
......................... SBS2012 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\SBS2012
Starting test: Advertising
Fatal Error:DsGetDcName (SBS2012) call failed, error 1355
The Locator could not find the server.
......................... SBS2012 failed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... SBS2012 passed test FrsEvent
Starting test: DFSREvent
......................... SBS2012 passed test DFSREvent
Starting test: SysVolCheck
......................... SBS2012 passed test SysVolCheck
Starting test: KccEvent
......................... SBS2012 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... SBS2012 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... SBS2012 passed test MachineAccount
Starting test: NCSecDesc
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=DomainDnsZones,DC=Contosso,DC=local
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=ForestDnsZones,DC=Contosso,DC=local
......................... SBS2012 failed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\SBS2012\netlogon)
[SBS2012] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... SBS2012 failed test NetLogons
Starting test: ObjectsReplicated
......................... SBS2012 passed test ObjectsReplicated
Starting test: Replications
[Replications Check,SBS2012] DsReplicaGetInfo(PENDING_OPS, NULL)
failed, error 0x2105 "Replication access was denied."
......................... SBS2012 failed test Replications
Starting test: RidManager
......................... SBS2012 passed test RidManager
Starting test: Services
Could not open NTDS Service on SBS2012, error 0x5
"Access is denied."
......................... SBS2012 failed test Services
Starting test: SystemLog
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:27:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:32:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:37:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:42:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:47:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:52:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x00000457
Time Generated: 07/12/2013 08:54:09
Event String:
Driver EPSON WorkForce 645 Series required for printer EPSON WorkForce 645 Series is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 07/12/2013 08:54:10
Event String:
Driver FX DocuCentre-IV C2270 PCL 6 required for printer scanner - 212 Manukau Rd Epsom is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 07/12/2013 08:54:10
Event String:
Driver HP ePrint required for printer HP ePrint is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 07/12/2013 08:54:11
Event String:
Driver PDF Complete Converter required for printer PDF Complete is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 07/12/2013 08:54:14
Event String:
Driver Send To Microsoft OneNote 2010 Driver required for printer Send To OneNote 2010 is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:57:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 09:02:33
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
A warning event occurred. EventID: 0x00002724
Time Generated: 07/12/2013 09:03:32
Event String:
This computer has at least one dynamically assigned IPv6 address.For reliable DHCPv6 server operation, you should use only static IPv6 addresses.
An error event occurred. EventID: 0x0000041A
Time Generated: 07/12/2013 09:03:33
Event String:
The DHCP/BINL service on the local machine encountered a network error. The error was: 0x 2.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 09:03:33
Event String:
The DHCP/BINL service on this computer is shutting down. See the previous event log messages for reasons.
An error event occurred. EventID: 0xC0002720
Time Generated: 07/12/2013 09:03:45
Event String:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
An error event occurred. EventID: 0xC0002720
Time Generated: 07/12/2013 09:03:46
Event String:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
An error event occurred. EventID: 0xC0002720
Time Generated: 07/12/2013 09:03:46
Event String:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
An error event occurred. EventID: 0xC0002720
Time Generated: 07/12/2013 09:03:46
Event String:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
An error event occurred. EventID: 0xC0002720
Time Generated: 07/12/2013 09:03:46
Event String:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
An error event occurred. EventID: 0x00000406
Time Generated: 07/12/2013 09:07:33
Event String:
The processing of Group Policy failed. Windows attempted to retrieve new Group Policy settings for this user or computer. Look in the details tab for error code and description. Windows will automatically retry this operation at the next refresh cycle. Computers joined to the domain must have proper name resolution and network connectivity to a domain controller for discovery of new Group Policy objects and settings. An event will be logged when Group Policy is successful.
An error event occurred. EventID: 0x00000406
Time Generated: 07/12/2013 09:12:34
Event String:
The processing of Group Policy failed. Windows attempted to retrieve new Group Policy settings for this user or computer. Look in the details tab for error code and description. Windows will automatically retry this operation at the next refresh cycle. Computers joined to the domain must have proper name resolution and network connectivity to a domain controller for discovery of new Group Policy objects and settings. An event will be logged when Group Policy is successful.
An error event occurred. EventID: 0xC00038D6
Time Generated: 07/12/2013 09:16:24
Event String:
The DFS Namespace service could not initialize cross forest trust information on this domain controller, but it will periodically retry the operation. The return code is in the record data.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 09:17:34
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 09:22:34
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
......................... SBS2012 failed test SystemLog
Starting test: VerifyReferences
......................... SBS2012 passed test VerifyReferences
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : Contosso
Starting test: CheckSDRefDom
......................... Contosso passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Contosso passed test CrossRefValidation
Running enterprise tests on : Contosso.local
Starting test: LocatorCheck
Warning: DcGetDcName(GC_SERVER_REQUIRED) call failed, error 1355
A Global Catalog Server could not be located - All GC's are down.
Warning: DcGetDcName(TIME_SERVER) call failed, error 1355
A Time Server could not be located.
The server holding the PDC role is down.
Warning: DcGetDcName(GOOD_TIME_SERVER_PREFERRED) call failed, error
1355
A Good Time Server could not be located.
Warning: DcGetDcName(KDC_REQUIRED) call failed, error 1355
A KDC could not be located - All the KDCs are down.
......................... Contosso.local failed test LocatorCheck
Starting test: Intersite
......................... Contosso.local passed test Intersite
I found a few people who have had similar issues that was caused by the "netlogon" service being paused or stopped but in my case it is set to automatically start and is running.
I have also posted this to serverfault (cant post links yet serverfault.com/questions/522691/a-global-catalog-server-could-not-be-located-all-gcs-are-down) added as there may be info there that may help.
Thanks for taking the time to read this, hopefully someone out there has come across this before or can offer something in regards to the next steps I should take.Some troubleshooting ideas:
0. Check if the DCs can resolve each other using their DNSHostName. If not, this indicates some DNS misconfiguration
-- you need to fix that first.
1. Check if the both the DCs are pointing to the same DNS server (or DNS servers that are replica of each
other). Run: "ipconfig /all" and check its output. If not, correct the DNS client settings and run dcdiag after sometime.
2. Check if dynamic updates are "turned on" on the DNS server.
3. Try re-registering the DCs SRV records by either restarting netlogon service or by running the following
command:
nltest.exe /dsregdns -
Hi All,
I am running an SSIS solution that runs 5 packages in sequence. Only one package fails because of the error:
[SSIS.Pipeline] Warning: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's console.
I have added myself to the performance counters group.
I am running windows 7 with SSIS 2008.
Any ideas would be appreciated. I have read that some have disabled the warning, but I cannot figure out how to disable a warning.
Thanks.
IvanHi Ivan,
A package would not fail due the warning itself, speaking of which means the account executing it is not privileged to load the Perf counters, and should thus be safely ignored.
To fix visit: http://support.microsoft.com/kb/2496375/en-us
So, the package either has an error or it actually runs.
Arthur My Blog -
Hi
I get this warning running through powershell_ise but through sql agent it just errors out.
The code does everything it is supposed to and I tried everything to completely resolve the warning to no avail.
How do I supress it so sql agent wont error out running powershell code?
Thanks!
WARNING: Could not obtain SQL Server Service information. An attempt to connect to WMI on 'server_name' failed with the following error: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Warning only present when it connects to remote servers, it doesn't produce it for local server. And it does get all info from the remote servers.
PaulaHi paulata,
According to your description, when you run powershell scripts about the remote machine
in SQL Server Agent job, the warning error will occur. “The common error message is Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)).” This suggests that your credentials aren't sufficient for accessing the
remote system. If you have an account that has sufficient permissions for the query, there's a simple workaround for this problem in the form of PowerShell's Get-Credential command and the script's Credential parameter. I recommend you check if your account
has permission on remote machine and it can execute the powershell scripts.
In addition, if you want to run query statement on the remote machine , I recommend you create Linked Server, then do some related operations. There is a similar issue about access denied, you can review the following article.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/157f536d-6716-4547-bdb4-9e3c8451cb95/sql-agent-service-account-permissions-sql-server-2008?forum=sqlgetstarted
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
A Global Catalog Server could not be located - All GC's are down server 2003 dc
Im all out of ideas. I have two 2003 server DC's that both fail DCDIAG with the following adn my exchange services wont come online due to this. please help!
dc1-server dcdiag
Starting test: FsmoCheck
Warning: DcGetDcName(GC_SERVER_REQUIRED) call failed, error 1355
A Global Catalog Server could not be located - All GC's are down.
PDC Name: \\dc1-server.silistra-bg.net
Locator Flags: 0xe00003dd
Warning: DcGetDcName(TIME_SERVER) call failed, error 1355
A Time Server could not be located.
The server holding the PDC role is down.
Warning: DcGetDcName(GOOD_TIME_SERVER_PREFERRED) call failed, error 1355
A Good Time Server could not be located.
Warning: DcGetDcName(KDC_REQUIRED) call failed, error 1355
A KDC could not be located - All the KDCs are down.
......................... silistra-bg.net failed test FsmoCheck
dc2-server dcdiag:
Starting test: FsmoCheck
Warning: DcGetDcName(GC_SERVER_REQUIRED) call failed, error 1355
A Global Catalog Server could not be located - All GC's are down.
Warning: DcGetDcName(PDC_REQUIRED) call failed, error 1355
A Primary Domain Controller could not be located.
The server holding the PDC role is down.
Warning: DcGetDcName(TIME_SERVER) call failed, error 1355
A Time Server could not be located.
The server holding the PDC role is down.
Warning: DcGetDcName(GOOD_TIME_SERVER_PREFERRED) call failed, error 1355
A Good Time Server could not be located.
Warning: DcGetDcName(KDC_REQUIRED) call failed, error 1355
A KDC could not be located - All the KDCs are down.
......................... silistra-bg.net failed test FsmoCheckSome troubleshooting ideas:
0. Check if the DCs can resolve each other using their DNSHostName. If not, this indicates some DNS misconfiguration
-- you need to fix that first.
1. Check if the both the DCs are pointing to the same DNS server (or DNS servers that are replica of each
other). Run: "ipconfig /all" and check its output. If not, correct the DNS client settings and run dcdiag after sometime.
2. Check if dynamic updates are "turned on" on the DNS server.
3. Try re-registering the DCs SRV records by either restarting netlogon service or by running the following
command:
nltest.exe /dsregdns -
Invoice corrections Sales order- New Pricing is not carried out
Hi All,
waiting for some one to guide me in a right way...
I have Scenario where creating a invoice correction request with reference to Invoice document.New pricing is not carried in debit line item even though i changed the pricing date as current date for the line item
When i copied with the invoice document, 2 new line items are created with a same price conditions.
1st line item is a credit and 2nd line item is a debit item.
I need to do a price adjustment in debit line. So i maintained a new pricing record for the material to carry out the price.
To achieve this in customizing VTAF (billing to sales) I have tried multiple options as below in 2nd pricing type field as B,C,D,E and F
2nd Pricing type - B Carry out new pricing
C Copy manual pricing elements and redetermine the others
D Copy pricing elements unchanged
E Adopt price components and fix values
F Copy pricing elements, turn value and fix
But still the new pricing is not carried out.I tried to manually change the Pricing date in the line item level, still the new price is not updated in the order.
I have seen SAP Help in below link the Debit line can update with correct price point 3 in proces flow , check this below link for reference.
http://help.sap.com/saphelp_46c/helpdata/en/dd/55feeb545a11d1a7020000e829fd11/content.htm.
Please help...
Regards,
ParthibanHello Parthiban,
I feel you are aware of the effect/functionality of 2nd pricing type.
In the invoice correction request, two items are automatically created for each item in the invoice to be copied (which you did mention):
- first item: credit memo item
- second item: debit memo item
And for invoice correction request, a particular pricing type is needed for the second item.
So as per standard, you have to use pricing type 'E' for the credit memo item to guarantee that the item will not be changed.
And you should give a new pricing type to the debit memo item.
The system creates a credit or debit memo depending on whether a postive or negative difference is generated.
So that means
Pricing type will effect ItemCat Proposal-G2N
and 2nd pricing type will effect 2ndItemCatProposal-L2N
Now, make changes in pricing type based on your business requirement.
I hope this will assist you in understanding.
Thanks & Regards
JP -
My Ipod classic wont play TED, The Grid, Techzilla and other video podcasts (but not all video podcasts). The genious bar could not figure out the problem. Instead, the Apple store gave me credit towards a new classic, which produced the same problem. This problem is not isolated to a single computer. Secondly, the convert to ipod version feature in Itunes does not resolve the problem. Lastly, I tried restoring the ipod to no avail. I've heard this is a video codec problem.
See this extensive older thread on the issue.
https://discussions.apple.com/thread/2813428?start=45&tstart=0
B-rock -
*** WARNING: Could not start service 80 for protocol HTTP on host MyFQDN
Hi,
I m configuring an external Sap webdispatcher to point to an ICF service
I need to install it on Windows Web server where others web sites are running.
I configured a specific ip for that on the Web servers and enter the DNS name in our domain.
On the the pfl file I define :
SAPLOCALHOSTFULL=<MyFQDN>
icm/host_name_full =<MyFQDN>
and specify icm/server_port_0 = PROT=HTTP,PORT=80
Each time I m starting it I received *** WARNING: Could not start service 80 for protocol HTTP on host <MyFQDN> .........
If I m using another port (Ex:86)no problem with my FQDN.But if I m doing servername:86 it s working also.
It s seems that the webdispatcher don t care about my FQDN.
How can I have the WEBDISPATCHER pointing to this specific FQDN and not all ?
Thanks,Hi Damien,
You problem is perfectly logical : It's not possible to have 2 programs (IIS and web dispatcher) listening together on the same 80 HTTP port.
There is no configuration that I know on the web dispatcher to tell him to listen only on one IP address.
Summary : what you want to do is not possible.
I had a similar request and I did the following.
I use a Linux box with an Apache reverse proxy to select to distribute the HTTP requests on different web dispatchers. The rules depends from the called URLs.
Regards,
Olivier -
Could not send out email...found out the real reason
I use windows live mail.When I was away from home I could not send out any emails. When I called tech support, I was told because I was not at home using my DSL router. I mentioned that I could receive emails from Verizon no problem but could not send out.
The real reason was my anti-virus out-bound email scan. When I turned off this scan, all my outbound mail went out.that's a great tip for forum users. thanks for sharing with everyone.
-
I have just downloaded the trial After Effects CC. I'm running Mavericks 10.9.4 on my Macbook Pro.
When I try to launch After Effects, this message appears:
"After Effects warning: Could not create the file '/Users/Library/Preferences/Adobe/After Effects/13.0/dummy'"
I have followed the advice from other posts on this issue regarding resetting all of the permissions in the Adobe folder in my library to read and write , but it doesn't change anything. I still get the same message when I try to launch the program. Moreover, there is no After Effects folder in my Adobe folder, even though it's clearly in my Applications folder.
I also uninstalled After Effects and tried to reinstall it, but to no avail.
I sure would like to give it a try, as I was planning on purchasing it, but this is just one more issue in a long irritating line of issues that have arisen since trying to download it from CC.
Any help is much appreciated.
Thanks.I am having this problem and this response does not make sense. I made the "Preferences" ,"Adobe" & "After Effects" folder along with the 10.0,11.0,13.0,13.2 folders all read/write. Can't seem to find an answer.
-
Hello all.
I've just installed arch, despite very little knowledge of linux (i had ubuntu for a short while before this), but I like a challenge so i thought i'd throw myself in at the deep end.
The installation went reasonably smoothly, but now i've got it up and running (with a minimal KDE install) but when I open up the konsole, I get the message
"Warning: Could not find '/bin/bash/', starting '/bin/sh' instead. Please check your profile settings."
and subsequently I cannot "su jake" (jake being my username, obviously). It requests my password, but when i press return I get the response
su: /bin/bash/: Not a directory
which means i've obviously done something wrong, but I cant make head nor tail of the archwiki on Bash, and from googling, I cant find anyone with a similar issue. I can run from root, but it's not ideal.
Thanks for any response as to why this might be happening, and how to fix it.
Last edited by hansolo128 (2012-04-24 08:55:37)@oxyd
sh-4.2$ cat /etc/shells
# /etc/shells
/bin/sh
/bin/bash
# End of file
root:x:0:0:root:/root:/bin/bash
jake:x:1000:100::/home/jake:/bin/bash/
the output of /etc/passwd is
root:x:0:0:root:/root:/bin/bash
bin:x:1:1:bin:/bin:/bin/false
daemon:x:2:2:daemon:/sbin:/bin/false
mail:x:8:12:mail:/var/spool/mail:/bin/false
ftp:x:14:11:ftp:/srv/ftp:/bin/false
http:x:33:33:http:/srv/http:/bin/false
nobody:x:99:99:nobody:/:/bin/false
dbus:x:81:81:System message bus:/:/bin/false
jake:x:1000:100::/home/jake:/bin/bash/
usbmux:x:140:140:usbmux user:/:/sbin/nologin
mysql:x:89:89::/var/lib/mysql:/bin/false
kdm:x:135:135::/var/lib/kdm:/bin/false
avahi:x:84:84:avahi:/:/bin/false
moving my home directory from /bin/bash/ to /bin/bash on the line of my username now allows me to su jake, but it doesnt solve the warning that /bin/bash/ doesnt exist. -
After Effects warning: Could not rename the file . . .
Mac pro 2x 2.66 Dual-Core
Mac os10.5.8
CS5 master collection install
Please some help on this would be greatly appreciated.
everything works except
After Effects
I get this message after launch:
After Effects warning: Could not rename the file '/Users/michaelrutledge/Library/Preferences/Adobe/After Effects/10.0/Workspaces.1405.1407350763865601.xml' to 'Workspaces.xml'.
followed by
After Effects can’t continue: unexpected failure during application startup
What I've tried:
I've searched this forum found one thread that hasn't helped
uninstalled entire Master Collection and reinstalled
fixed permissions
uninstalled and reinstalled just AE
I am unable to change the prefs directory indicated to add .xml file for folder.
Do not find Workspaces.1405.1407350763865601.xml
I'm about to download the master collection again and try a fresh install of AE.
Thank in advance for any help . . .
MAnd what if you simply trash the whole prefs folder/ move it out of the way? AE should happily re-create everything with factory defaults. realyl sounds like one of your workspace files is damaged, perhaps due to a crash.
Mylenium -
After effects warning could not create the file
Hi,
I am fairly new to After effects, (so new that I haven't managed to save a file). Can anyone help with this? I am running CS6 on an oldish mac pro, but flash and premiere run fine, and so does after effects, except it won't let me save, and instead comes up with this message: after effects warning could not create the file.
I have even tried saving a file with just a jpeg in it, and it still won't let me.
Any suggestions? I am a bit confused.When you save in AE, you're saving the project file -- which inclues all your work in the comp -- but you can't save the comp itself to a media file. It doesn't work that way. You have to export or use the AE Render Queue.
I recommend spending some quality time here. -
Warning: Could not find the customization level value for document
Hi All,
I am trying to upload the translation for one of the page at responsibility level.
I am getting following warning when running the below command.
java oracle.jrad.tools.trans.imp.XLIFFImporter $APPL_TOP/xmci/12.0.0/fr-CA/Translated/ARIACCTDETAILSPAGE.xlf -username apps -password apps -dbconnection "$AD_APPS_JDBC_URL"
Warning: Could not find the customization level value for document "/oracle/apps/ar/irec/accountDetails/webui/customizations/responsibility/51688/ARIACCTDETAILSPAGE".
The same is working fine if the translation is for some attribute at site or function level.
Did anyone faced this kind of issue.
Thanks,
AnoopAnoop,
I am sure you would have verified the responsibility id in the target instance is 51688(may be source instance your resp id is 51688 and in target it is different).
Have a look at this below notes, it might help.
1077267.1 - Unable To Move Resp Level OA Personalization From 1 Env To Another
848851.1 - Attempting To Upload XML File Generates Error: Could not find the customization level value for document
Thanks.
With Regards,
Kali.
OSSI.
Maybe you are looking for
-
My iPhone became wet at the beach. I put it in rice for 4 days. When I connect to itunes, it says the phone must be restored. It starts and then gives either the error 2001, or 2006. What exactly does this mean, and is it worth getting repaired?
-
Hi all, I have configured Tivoli 5.5 with SAP ECC6 . I am able to take backup using Brtools at command lavel. But when i am trying to take backup using DB13 than i am getting an error. *BKI5014E: Tivoli Storage Manager Error:* *ANS0220E (RC400) An i
-
Hi, How do we do initialization in DTP? is possible do initialization in DTP? do favor for me. REGARDS -sreedhar
-
Fotos aus iPhoto werden nicht auf das iPad geschoben
Hallo zusammen, Ich habe folgendes Problem: In iPhoto habe ich meine Fotos schön in Ereignisse eingeordnet. Dann mein iPad an den Mac angeschlossen und synchronisieren gelassen. Nun in Fotos ausgewählt das iPhoto genutzt werden soll. Hier einige Erei
-
Group by Summary in Crystal Report
Hi, I am using Item Code Generator (Add-On) to generate items .When I am generating that the item codes will be different but item name will be same for a range of items.Now in the report i want the item name ,qty and total value for that group of (i