Warning Event ID 6006 & 6005 and Information Event ID 6000 & 6003

Warning Event ID 6006 & 6005 and Information Event ID 6000 & 6003
Hi,
Would greatly appreciate if someone can advise me on the following warning & info event id I keep getting:
I am running two AD (Std 2012) on two hyperv servers. Noticed the events but I a able to join domain and login to AD on other member servers. What could be the cause?
Event ID 6006
The winlogon subscriber <GP Client> took 67 seconds to handle the notification event (CreateSession).
Event ID 6005
The winlogon notification subscriber <GP Client. is taking long time to handle the notification event (CreateSession).
Event ID 6000
The winlogon notification subscriber <AUINstallerAgent> was unavailable to handle a notification event.
The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Event ID 6003
The winlogon notification subscriber <AUInstallAgent> was unavailable to handle a critical notification event.
The winlogon notification subscriber <SessionEnv> was unavailable to handle a critical notification event.

Hi Shannlms,
Would you please let us know current situation of this issue?
Regarding to those events, please refer to following threads and check if can help you.
Event ID 6000 — Windows Logon Availability
Event ID 6003 — Windows Logon Availability
Event ID: 6005
Source: Winlogon
Event
ID: 6006 Source: Microsoft-Windows-Winlogon
In addition, would you please let me confirm whether there are some logon scripts applied to the server? Please
check again. Thanks for your understanding.
On Windows Server 2012 Standard, please run
sfc /scannow command to scan all protected system files. Meanwhile, please start the server in safe mode and check if this issue still persists.
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu

Similar Messages

Event Tracing Events (BootCKCL.etl files and CompCS events)

Not sure if this would be considered the correct place to post this request, however if anyone has any insight into this issue it would probably be someone who has experience with Kernel level event tracing and its data structures.
I have been trying to parse the BootCKCL.etl file with the event tracing apis to track cpu utilization of processes over start-up. However when i do this i do not get any thread switch events. I do get a bunch of CompCS events that have an undefined structure.
When i export this file with xperf i get a bunch of CSwitchedCached events witch contain the thread switching information i need. So my question is how is these CSwitchedCached events related to the CompCS events and are these data structures documented anywhere?
Thanks for any help,

Yes. Create a smart album with the criteria Photo is RAW:
Then you can select all of the photos in the smart album and use the Events ➙ Create Event menu option to move all of the RAW photos into a new event.
OT

How can i set action on UITaBar and get event from that

Hi All,
I m doing one apps in which i have to add three UITabBarItem and this is UITabBarSystemItem.
Now i cannot understand that how can i set action and get event from the?
And how can i set various views on three tab bar item.
I have to use UITabBar means i have to use UINavigationController+UITabBar
My code id
tabBar =[[UITabBar alloc] initWithFrame:CGRectMake(0,370,320,50)];
tabBar.backgroundColor =[UIColor blackColor];
UITabBarItem *search =[[UITabBarItem alloc] initWithTabBarSystemItem:UITabBarSystemItemSearch tag:0];
UITabBarItem *recents =[[UITabBarItem alloc] initWithTabBarSystemItem:UITabBarSystemItemRecents tag:1];
UITabBarItem *favorites =[[UITabBarItem alloc] initWithTabBarSystemItem:UITabBarSystemItemFavorit es tag:2];
tabBar.items =[[NSArray arrayWithObjects:search,recents,favorites, nil] retain];
tabBar.selectedItem = search;
[myView addSubview:tabBar];
[tabBar release];
I add a action:
UITabBarItem *search =[[UITabBarItem alloc] InitWithTabBarSystemItem:UITabBarSystemItemSearch tag:0 action:@selector(select:)];
So it error: Warning -no'InitWithTabBarSystemItem:tag:action:' method fount
So any can help me regarding it?

Thanks RickMaddy very much.
I read and do with sample at the View Controller Programming Guide . But when run it only view TabBar with title but haven't got any TabBarItem on it. I searched a few example about TabBar and i did, but i want do a form with a button then press on button it view a form with 2 TabBarItem on TabBar and press each TabBarItem will show correlative form page 1, page 2.
UITabBarController *tabBarControl = [[[UITabBarController alloc] initWithNibName:nil bundle:nil] autorelease];
tabBarControl.title = @"Tab bar";
ViewControl1 *view1 = [[[ViewControl1 alloc] initWithNibName:@"ViewControl1" bundle:nil] autorelease];
ViewControl1 *view2 = [[[ViewControl1 alloc] initWithNibName:@"ViewControl2" bundle:nil] autorelease];
tabBarControl.viewControllers = [NSArray arrayWithObjects:view1,view2,nil];
[self.navigationController pushViewController:tabBarControl animated:YES];

Badi and Business event( Urgent)

Hi experts,
      I am new to badi and business event 1120P. Please post how this business event exactly comes in to picture in this badi. also how to find this business event?
And also Post the logic or code. The requirement is given below . Pls Post the solution. Its very urgent.
Enhancement Summary
Two user exits are needed to determine the correct G/L Account and Cost Center on Shipment Cost documents and post the Material Group on the Accounting document. BADI_SCD_ACCTG and Business Event 1120P can be used to accommodate the new functionality.
Business Process
Specific G/L Accounts and Cost Centers have to be determined to post on the Shipment Cost document. This is needed to provide accurate management reporting capabilities on shipments for Sales Order or Stock Transfer Order. A new custom table must be created which contains the following information: Distribution, Mode of Transport, Account, Cost Center Material group. Distribution is an identifier here if this shipment originated from an SO or STO.
There are no screens involved in this enhancement.
Components
Table: ZTABLE1
Field     Data Element     Type     Length     Description
MANDT     MANDT     CLNT (key)     3     Client
DISTRIBUTION     Z_DISTRIBUTION     CHAR (key)     1     Distribution
MOT     ZZDEF_MOT     CHAR (key)     2     Mode of Transportation
MATKL     MATKL     CHAR (key)     9     Material group
SAKNR     SAKNR     CHAR     10     G/L Account Number
KOSTL     KOSTL     CHAR     10     Cost Center
This table gets updated manually by the FI team.
Values for Distribution are:
1 = Primary Distribution to Refinery
2 = Primary and Secondary Excluding refinery
All entries must be checked against SAP config and master tables
User exit BADI BADI_SCD_ACCTG will be used to determine the correct G/L Account, Cost Center and Product Group based on Distribution and Mode of Transport. This BADI gets called only when a new Shipment Cost document get created.
Once the BADI determined the new values it populates field c_vfkn-sakto with the G/L account, field c_vfkn-kostl with the Cost Center and exports the Product group to memory.
There is no field on the Shipment Cost Document to store the Product group. Therefore another mechanism must be used to get the Product Group on the accounting document.
Business Event 1120P can be used to import the Product group out of memory and put it on BSEG-MATNR. Structure BSEG_SUBST must be enhanced with field MATNR for this purpose.
Function, Rules, Exits      Description of Functionality, Rules, Exits
BADI_SCD_ACCTG     Business Add-In for Shipment Cost Account Assignment
Business Framework     Business Event 1120P can be used to import the Product Group from memory and to populate field BSEG_SUBST-MATNR.
This event gets called from different places. It needs to be ensured that it only populates the value when it was called from BADI_SCD_ACCTG.
Custom Table     A look-up Table needs to be maintained for Distribution, Mode of Transport, G/L Account, Cost Center and Material Group
Transaction code     To maintain the new table
Append Structure     To enhance structure BSEG_SUBST with MATNR
      Business Add-In BADI_SCD_ACCTG can be used to determine the account assignments for a shipment cost item to set the G/L Account and Cost Center. All data needed to determine the new information gets provided in this BADI.
Logic:
     Determine if STO or SO based on Document Category from internal table I_REFOBJ-VTRLP field VGTYP If is C then Distribution type is Sales Order (Primary and Secondary Excluding Refinery 2 ) else we need to check the receiving plant. If the receiving plant (I_REFOBJ-VTRLK field WERKS) is a refinery the Distribution type is Primary (1) else its a (Primary and Secondary Excluding Refinery 2 ). Refineries can be identified via Function Module ZPLANTCLASSIFICATION. The plant must be passed into Import Parameter IP_SAPPLANT and field INT_PLANTCHAR-ATNAM must be looked up with value SAPTYPE. If it exists and field ATWRT contains RFY, the plant is a refinery.
     Product Group can be determined from the Material master through Material group field MARA-MATKL.
     Mode of Transport will be passed in the BADI in VTRLK-OIC_MOT.
     Select single entry from table ZTABLE1based on Distribution, Mode of Transport and Material Group. If nothing gets selected, error message No entry exists in table ZTABLE1for Distribution (distribution), MOT (MOT) & Mat. Group (material group) should be triggered.
     Move ZTABLE1-SAKNR to c_vfkn-sakto and ZTABLE1-KOSTL to c_vfkn-kostl
     The Material group must be exported to memory in BADI_SCD_ACCTG
     The Material group must be imported from memory in Business Event BP1120P
     Free Memory in Business Event BP1120P
This is VI01 Creation of Freight Cost Item screen
and also code for function module ZPLANTCLASSIFICATION below
FUNCTION zplantclassification .
""Local interface:
*" IMPORTING
*"     REFERENCE(IP_SAPPLANT) LIKE AUSP-OBJEK OPTIONAL
*"     REFERENCE(IP_CPSPLANT) LIKE AUSP-ATWRT OPTIONAL
*"     REFERENCE(IP_SISLOC) LIKE AUSP-ATWRT OPTIONAL
*" EXPORTING
*"     VALUE(EP_SAPPLANT) LIKE AUSP-OBJEK
*"     VALUE(EP_CPSPLANT) LIKE AUSP-ATWRT
*"     VALUE(EP_SISLOC) LIKE AUSP-ATWRT
*"     VALUE(EP_OWNERSHIP) LIKE AUSP-ATWRT
*"     VALUE(EP_SMISTYPE) LIKE AUSP-ATWRT
*"     VALUE(EP_SPOTREF) LIKE AUSP-ATWRT
*"     VALUE(EP_SUBTYPE) LIKE AUSP-ATWRT
*"     VALUE(EP_SUPPLYREGION) LIKE AUSP-ATWRT
*"     VALUE(EP_TYPE) LIKE AUSP-ATWRT
*"     VALUE(EP_DISTAREA) LIKE AUSP-ATWRT
*"     VALUE(EP_GEOGAREA) LIKE AUSP-ATWRT
*"     VALUE(EP_HMF) LIKE AUSP-ATWRT
*"     VALUE(EP_IATACODE) LIKE AUSP-ATWRT
*"     VALUE(EP_IRSTCN) LIKE AUSP-ATWRT
*"     VALUE(EP_OPSAREA) LIKE AUSP-ATWRT
*"     VALUE(EP_PLANTSTAT) LIKE AUSP-ATWRT
*"     VALUE(EP_PORTCODE) LIKE AUSP-ATWRT
*"     VALUE(EP_REFAREA) LIKE AUSP-ATWRT
*"     VALUE(EP_SAPTYPE) LIKE AUSP-ATWRT
*"     VALUE(EP_MFGWARRANTY) LIKE AUSP-ATWRT
*"     VALUE(EP_USERTYPE) LIKE AUSP-ATWRT
*"     VALUE(EP_TRMCENTER) LIKE AUSP-ATWRT
*"     VALUE(EP_TRANSCENTER) LIKE AUSP-ATWRT
*"     VALUE(EP_FEIN) LIKE AUSP-ATWRT
*" TABLES
*"      INT_PLANTCHAR STRUCTURE ZPLANTCLASSIFICATION OPTIONAL
*" EXCEPTIONS
*"      NO_OBJEK_FOUND
*"      NO_CPSPLANT_FOUND
*"      NO_SISLOC_FOUND
*"      NO_INPUT_FOUND
*"      VALID_PLANT_NO_CHARACTERISTIC
*"      ONE_TO_MANY_ISSUE
*"      PLANT_NOT_FOUND_ZDEF_DELPLANT
*"      UNKNOWN_ERRORS
FM Name: ZPLANTCLASSIFICATION
Created By : SYUB                                                  *
Description : Function Module to retrieve plant characteristics      *
The function module has two capabilities:
1. Retrieve only the necessary characteristics
2. Retrieve the whole characteristics into an internal table.
Parameter Description                                                *
In the future, if there is a new characteristic added to the
plant classification tables, the characteristic has to be added
to the list of the export parameters and the loop statement.
TABLES: ausp, cabn, ksml, zdef_delplant.
DATA: ws_objek LIKE ausp-objek,
        ws_countchar TYPE i,
        ws_countplant TYPE i.
*Internal table for SAP plant
DATA: BEGIN OF int_plant OCCURS 0,
        plant LIKE ausp-objek,
        END OF int_plant.
*sap plant code is the input parameter.Move objek, atnam, and atwrt to
*internal table PLANTCHAR using inner join of AUSP, CABN, and KSML to
*synch up the internal characteristic numbers throughout the 3 tables.
IF NOT ip_sapplant IS INITIAL.
    SELECT auspobjek cabnatnam ausp~atwrt
      INTO CORRESPONDING FIELDS OF TABLE int_plantchar
      FROM ksml AS ksml
      INNER JOIN cabn AS cabn
        ON cabnatinn = ksmlimerk
      INNER JOIN ausp AS ausp
        ON ausp~objek = ip_sapplant
        AND auspatinn = cabnatinn
        AND ausp~mafid = 'O'
        AND ausp~klart = 'Z01'.
*Checking the existence of ip_sapplant in the table, if it doesn't
*exist, raise the exception else if it exists, check if it has
*characteristic values.
    IF sy-subrc NE 0.
      RAISE no_objek_found.
    ELSE.
      DESCRIBE TABLE int_plantchar LINES ws_countchar.
      IF ws_countchar LT 2.
        RAISE valid_plant_no_characteristic.
      ENDIF.
    ENDIF.
*cps plant code is the input parameter. Move objek from table AUSP to
*ws_objek using inner join of CABN and AUSP to match up the internal
*characteristic numbers from the 2 tables.
ELSEIF NOT ip_cpsplant IS INITIAL.
    SELECT ausp~objek
      INTO TABLE int_plant
      FROM ausp AS ausp
      INNER JOIN cabn AS cabn
        ON cabn~atnam = 'OLDCODE'
          WHERE auspatinn = cabnatinn
            AND ausp~mafid = 'O'
            AND ausp~klart = 'Z01'
            AND ausp~atwrt = ip_cpsplant.
*Checking the existence of ip_cpsplant in the table
    IF sy-subrc EQ 0.
*Counting the number of SAP plants in the internal table int_plant
      DESCRIBE TABLE int_plant LINES ws_countplant.
*Moving the values of objek, atnam, and atwrt to PLANTCHAR using objek
*from ws_objek.
      IF ws_countplant EQ 1.
        LOOP AT int_plant.
          SELECT auspobjek cabnatnam ausp~atwrt
            INTO CORRESPONDING FIELDS OF TABLE int_plantchar
            FROM ksml AS ksml
            INNER JOIN cabn AS cabn
              ON cabnatinn = ksmlimerk
            INNER JOIN ausp AS ausp
              ON ausp~objek = int_plant-plant
              AND auspatinn = cabnatinn
              AND ausp~mafid = 'O'
              AND ausp~klart = 'Z01'.
        ENDLOOP.
*If there more than one SAP Plants, then raise an exception.
      ELSEIF ws_countplant GT 1.
        RAISE one_to_many_issue.
      ENDIF.
    ELSE.
      SELECT SINGLE werks FROM zdef_delplant
        INTO ws_objek
        WHERE cpsloc = ip_cpsplant.
      SELECT auspobjek cabnatnam ausp~atwrt
       INTO CORRESPONDING FIELDS OF TABLE int_plantchar
       FROM ksml AS ksml
       INNER JOIN cabn AS cabn
         ON cabnatinn = ksmlimerk
       INNER JOIN ausp AS ausp
         ON ausp~objek = ws_objek
         AND auspatinn = cabnatinn
         AND ausp~mafid = 'O'
         AND ausp~klart = 'Z01'.
      if sy-subrc ne 0.
        raise plant_not_found_zdef_delplant.
      endif.
    ENDIF.
*cps plant code is the input parameter. Move objek from table AUSP to
*ws_objek using inner join of CABN and AUSP to match up the internal
*characteristic numbers from the 2 tables.
ELSEIF NOT ip_sisloc IS INITIAL.
    SELECT ausp~objek
      INTO TABLE int_plant
      FROM ausp AS ausp
      INNER JOIN cabn AS cabn
        ON cabn~atnam = 'SISLOC'
          WHERE auspatinn = cabnatinn
            AND ausp~mafid = 'O'
            AND ausp~klart = 'Z01'
            AND ausp~atwrt = ip_sisloc.
*Checking the existence of ip_sapplant in the table
    IF sy-subrc EQ 0.
      DESCRIBE TABLE int_plant LINES ws_countplant.
*Moving the values of objek, atnam, and atwrt to PLANTCHAR using objek
*from ws_objek.
      IF ws_countplant EQ 1.
        LOOP AT int_plant.
          SELECT auspobjek cabnatnam ausp~atwrt
            INTO CORRESPONDING FIELDS OF TABLE int_plantchar
            FROM ksml AS ksml
            INNER JOIN cabn AS cabn
              ON cabnatinn = ksmlimerk
            INNER JOIN ausp AS ausp
              ON ausp~objek = int_plant-plant
              AND auspatinn = cabnatinn
              AND ausp~mafid = 'O'
              AND ausp~klart = 'Z01'.
        ENDLOOP.
*If there more than one SAP Plants, then raise an exception.
      ELSEIF ws_countplant GT 1.
        RAISE one_to_many_issue.
      ENDIF.
    ELSE.
      SELECT SINGLE werks FROM zdef_delplant
        INTO ws_objek
        WHERE sisloc = ip_sisloc.
      SELECT auspobjek cabnatnam ausp~atwrt
       INTO CORRESPONDING FIELDS OF TABLE int_plantchar
       FROM ksml AS ksml
       INNER JOIN cabn AS cabn
         ON cabnatinn = ksmlimerk
       INNER JOIN ausp AS ausp
         ON ausp~objek = ws_objek
         AND auspatinn = cabnatinn
         AND ausp~mafid = 'O'
         AND ausp~klart = 'Z01'.
      if sy-subrc ne 0.
        raise plant_not_found_zdef_delplant.
      endif.
    ENDIF.
ELSE.
*Checking if there is an input parameter entered.
    RAISE no_input_found.
ENDIF.
Modified 7/30 by RFOR to validate SAP plant is in plant master
data: wa_t001w like t001w.
read table int_plantchar.
SELECT SINGLE * from t001w into wa_t001w where
werks = int_plantchar-objek.
if sy-subrc ne 0.
    raise NO_OBJEK_FOUND.
endif.
*Moving all the characteristic values to the export parameters
LOOP AT int_plantchar.
    MOVE int_plantchar-objek TO ep_sapplant.
    CASE int_plantchar-atnam.
      WHEN 'OLDCODE'.
        MOVE int_plantchar-atwrt TO ep_cpsplant.
      WHEN 'SISLOC'.
        MOVE int_plantchar-atwrt TO ep_sisloc.
      WHEN 'OWNERSHIP'.
        MOVE int_plantchar-atwrt TO ep_ownership.
      WHEN 'SMISTYPE'.
        MOVE int_plantchar-atwrt TO ep_smistype.
      WHEN 'SPOTREF'.
        MOVE int_plantchar-atwrt TO ep_spotref.
      WHEN 'SUBTYPE'.
        MOVE int_plantchar-atwrt TO ep_subtype.
      WHEN 'SUPPLYREGION'.
        MOVE int_plantchar-atwrt TO ep_supplyregion.
      WHEN 'TYPE'.
        MOVE int_plantchar-atwrt TO ep_type.
      WHEN 'DISTAREA'.
        MOVE int_plantchar-atwrt TO ep_distarea.
      WHEN 'GEOGAREA'.
        MOVE int_plantchar-atwrt TO ep_geogarea.
      WHEN 'HMF'.
        MOVE int_plantchar-atwrt TO ep_hmf.
      WHEN 'IATACODE'.
        MOVE int_plantchar-atwrt TO ep_iatacode.
      WHEN 'IRSTCN'.
        MOVE int_plantchar-atwrt TO ep_irstcn.
      WHEN 'OPSAREA'.
        MOVE int_plantchar-atwrt TO ep_opsarea.
      WHEN 'PLANTSTAT'.
        MOVE int_plantchar-atwrt TO ep_plantstat.
      WHEN 'PORTCODE'.
        MOVE int_plantchar-atwrt TO ep_portcode.
      WHEN 'REFAREA'.
        MOVE int_plantchar-atwrt TO ep_refarea.
      WHEN 'SAPTYPE'.
        MOVE int_plantchar-atwrt TO ep_saptype.
      WHEN 'MFG_WARRANTY'.
        MOVE int_plantchar-atwrt TO ep_mfgwarranty.
      WHEN 'USER_TYPE'.
        MOVE int_plantchar-atwrt TO ep_usertype.
      WHEN 'TERMINALCENTER'.
        MOVE int_plantchar-atwrt TO ep_trmcenter.
      WHEN 'TRANSPORTATIONCENTER'.
        MOVE int_plantchar-atwrt TO ep_transcenter.
      when 'FEIN'.
        move int_plantchar-atwrt to ep_fein.
    ENDCASE.
ENDLOOP.
ENDFUNCTION.
Pls help me out from this problem its very urgent.
Thanks

hi SK ,
process like this .
in BADI
method.
1.Here u have to put ur logic based on the Requirement.
2.then u have to call BTE like this
<b>call function 'OPEN_FI_PERFORM_00001020_E'
      tables
        t_bseg = xbseg
        t_bkpf = xbkpf.</b>
3.Update Ztables.
endmethod.
this is sample logic only.First get logic of TS then u will come to know how to do?
regards
prabhu

My contacts and calendar events disappeared from my iPad! How can I retrieve them??

My contacts and calendar events disappeared from my iPad. Can they be retrieved?

From
http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=B786F9DEB73FE BE22A4D2F911A97BC3C?externalId=KB35311&sliceId=2&cmd=displayKC&docType=kc&noCoun t=true&ViewedDocsListHelper=com.kanisa.apps.common.BaseViewedDocsListHelperImpl
BlackBerry Desktop Software utilizes Apple's SyncServices technology in order to synchronize Contact, Calendar, Notes, and Tasks information to and from the Mac computer.
BlackBerry Desktop Software synchronizes information with the SyncServices database, which is synchronized with the desktop applications on the Mac computer (for example: Apple Address Book, iCal, Apple Mail, Microsoft Outlook for Mac). BlackBerry Desktop Software does not synchronize directly to or from the desktop applications on the Mac computer.
Mac OS X Mavericks v10.9 and later does not use SyncServices, therefore, it is not possible to synchronize Contact or Calendar information using the BlackBerry Desktop Software on these versions of OS X.
For more information on SyncServices and OS X Mavericks, see the following Apple Support article:
http://support.apple.com/kb/HT5847
Note: BlackBerry Desktop software 2.4 is still supported for use with Mac OS X v10.6, 10.7, and 10.8.
Pete

Need to collect the Windows logon and logoff events across the Domain in a DC eviornment, for different machines and user accounts.

Hello All,
I am trying to build a Tool to collect the info about all the user's who login and logoff on daily basis in a domain network. I am using a windows 2008 server as a DC and have xp, win 7, win 8 , win 12 server as clients in the network.
There are few questions in my mind which I am not able to answer.
1> When a user tries to login to the DC network, he/ she gets authenticated using the kerberos protocol. does these authentication gets logged on the AD server by default? I have see a way to enable it from registry but even that's not giving me the expected
output in the eventvwr.
2> Do I have to use Audit policies to monitor all the user's log off and log on activities?
3> Is there a way to collect these information from any place on the AD server other than the Eventvwr?
Please help me in finding the solutions to these query's of mine.
Thanks.

1. Open the Group Policy Management console on any domain controller in the target domain: navigate to Start → Administrative Tools → Group Policy Management.
2. In the left pane, navigate to Forest: <domain_name>→ Domains → <domain_name>→ Domain Controllers. Right-click the effective domain controllers policy (by default, it is the Default Domain Controllers Policy), and select Edit from the pop-up
menu. </domain_name></domain_name>
<domain_name><domain_name>3. In the Group Policy Management Editor dialog, expand the Computer Configuration node on the left and navigate to Policies → Windows Settings → Security Settings → Local Policies → Audit Policy. </domain_name></domain_name>
<domain_name><domain_name>4. Set the Audit account management and the Audit directory service access policy to "Success". Set the Audit logon events policy to "Success" and "Failure". </domain_name></domain_name>
5. Navigate to Start → Run and type '"cmd". Input the gpupdate /force command and press Enter. The group policy will be updated.
Number of events could be excessive so you need to adjust size of Security log ( 1gb for example )
Usage of EventCombMT Tool (part of
MS ALtools )
 This tool gathers specific events from several different servers to one central location.
 Run the EventCombMT.exe > Right Click on Select to search field > Choose Get DCs in Domain > Mark your Domain Controllers for search
 Click the Searches menu > replace Event ID field values with
4624 LOGON / 4634 LOGOFF
 Click Search and wait for the process to complete the operation.
 After the search is done the output directory contains the log files for the domain controllers where events with the specified Event ID’s were found.
Alternatively you can try Netwrix Auditor for Active Directory solution with 20 days of free trial to generate such reports.
--- Jeff (Netwrix)

I just installed last versión of iphoto and it erased my iPhoto events. Now i dont have iphoto library anymore and i only have my events in iPhone and in MobileMe gallery. How can i download and migrate events in MobileMe gallery to events in iPhoto ?

I just installed last versión of iphoto and it erased my iPhoto events. Now i dont have iphoto library anymore and i only have my events in iPhone and in MobileMe gallery. How can i download and migrate events in MobileMe gallery to events in iPhoto ?

O also installed lion before and as i had filevault activated y lost my user information in timemachine. So, i have a useless backup. I only have events in iPhone ( due i didnt sync photos) and in MobileMe gallery, and i already migrate to iCloud. So?

Is it possible to duplicate (new and existing) events and paste them into a new calendar automatically?

I have four google calendars connected to my mac via CalDav, and i need to have all the events in all those four calendars into a new one also in google calendar. So, i want to know if it is possible to configure an automator action or an applescript that duplicate events (the old ones and the new events i'll create) of some calendars into a new one. It would be like grouping some calendars to create a new one, without deleting those calendars, do you understand? Is it possible? I want to made this as transparent for me as possible, automatic.
Thanks for helping! and sorry about my english

If you are importing from a CD, you can tell iTunes not to automatically import the CD (Edit->Preferences: When you insert a CD: Ask to Import CD). That's what I do. I then edit the track names and album artists to be what I want before I import the CD. After the import is done, I go back to the CD (by album name in the search bar) and correct the album art.
The other way (which is what you need to do if you are downloading digital files, such as Amazon MP3) is to remember the "Recently Added" playlist. That's a subset of albums added in the last few weeks, so it presumably should be easier to find the new albums. Again, you can go there and edit the information.
If "Recently Added" is still got too much, you can edit the smart playlist to shorten the time period and create a "Really Recently Added" Playlist.
I'm familiar with managing music in large libraries: I've been recording from LP into my iPod this week (plus adding some CDs I had forgotten about), and currently have 26878 tracks.

Mix published and unpublished events in one calendar?

Just got an iPhone.
Is there a way to mix published and unpublished events in one calendar?
I've heard that other calendar software have this option.
With iCal on a Mac it's possible to choose which calendars to view, so then it's not a problem to have one published and one unpublished calendar.
But with iCal on iPhone you can only choose between viewing ONE and ALL calendars.
I subscribe to a bunch of other peoples calendars, so viewing ALL is never an option..
So now I would like to write all my events, published and private, into ONE calendar. Is that possible?
Anyone?

Yes. I tried changing the setting to Sync All Events (instead of the time limited sync) and let it refresh. No change. No display
I also tried rescheduling the event by one hour on the same day (no other changes), then save. No change. No display.
I ended up deleting the events and re-entering them, with identical information (including the recurring end date, remarks, etc., you name it), and then the events appeared like the rest of them in the same calendar.
I'd still like to know if there is a solution to the original problem. I'm still concerned that other events, maybe in the other calendar as well, are no appearing and it's impossible to rely on a sample or to verify every event.
Thanks for your assistance.

Multiple event handlers registered for the same event and error when adding users to sec groups

Project Server 2013 CU April (May) 2014
I've created and installed two event handlers (separate dll:s) and both are triggering on Project Published - initially, both are working fine.
After an IISReset, trying to create a new security group (or add a user to an existing group) will result in an error on the page and a corresponding error in the ULS log - the latter indicating an error in the method security.creategroups, and specifically
a problem 'An item with the same key has already been added.'
An SQL trace reveals a break in execution after executing the proc 'pub.MSP_ADMIN_ReadEventReceivers' which returns all registered event handlers.
In my case, the result of that proc execution shows that there are two event handlers registered with an EVENT_ID of 53 (Project Published) and with ORDER_FIRED set to 1 and 2 respectively.
I tried removing one of the event receivers using the Central Admin PWA interface and then everything worked just fine - I added the event receiver back again, and everything STILL worked! IISReset and I got the error back again. :-(
Since there's obviously some problem with reading multiple entries from that table regardless of the ORDER_FIRED differentiation, I tried temporarily modifying one of the '53' entries in the table directly and then the sec group was created just fine!
I would like to know if anyone else has seen this? I've seen this on three separate installations now after deploying a second event listener onto those systems.
/Lars Hammarberg
//Lars Hammarberg www.connecta.se

Hi Lars,
yes I have seen the same issue. It is not related to April CU. I had the error before with SP1.
It is not only an issue with the security groups. At least in our case nothing worked at all. No custom field editing, all Queue Jobs failing.
For your case I suggest you consolidate your code in one eventhandler.
Theory says that you can have more than 1 (up to 999) eventhandlers for one Event (http://msdn.microsoft.com/en-us/library/ms481079(v=office.12).aspx) but that seems not to
work. Not sure, if it worked in earlier versions.
Kind regards
Christoph
Christoph Muelder | Senior Consultant, MCTS, MCSE, MCT | SOLVIN information management GmbH, Germany

Catching NFC device arrival and departure events in service

We have been trying to capture NFC events of device arriving and departing, and also sending and receiving data. So far we have a desktop application that can do that successfully (traditional Windows Desktop app, not a metro app). What we are trying to
do is to capture those events and data using a service, but do not see any events or data when using a service.
We were under the impression that, because our system runs as NT AUTHORITY/SYSTEM, the NFC events are not getting sent to it. To change the context to local user, we used something similar to
this to impersonate local user within the service, which does change the context to local user, but still does not catch any NFC events or data. (We verified that execution context changed by using WindowsIdentity.GetCurrent().Name).
So our questions are:
How to detect NFC device in proximity, and receive data, using a service? And what is the reason it does not work currently? (Is it for security that the OS is not allowing it?)
Are there any restrictions as to who can listen to NFC events?
Can we, for the sake of debugging, see anywhere in Windows (e.g. Event logger) if there are any NFC events? (We can here the ping sound that comes when a device is detected close by)
Thanks a lot! Appreciate your help!

Technical issue is already verified by the service center and confirmed the phone is dead, issue is no DOA is provided even though the phone got dead in a day.
Refer to the Lenovo complaint id here
LenCare ID: C130827012
Link to job sheet
Link to product delivery:
I need this resolved ASAP
Moderator Note; links to documents containing s/n or private information edited for member's own protection

ADF Drag and drop event inside the single af:treetable

Hi Experts,
I have a af:treeTable in my ADF web project and i would like to implement the drag and drop event to the same tree table for supporting my sample test project use case. Currently i am facing some issue to get the source tree node and the destination tree node of the drop and drop event inside my drop listener method. How can i get those object since i need to perform some business operation inside the listener. Please note that i am not using ADF BC4j in my project. The service layer is implemented as EJB and it's being called from the backing bean.
Looking forward some guide lines to resolve this issue from you experts.
Thank you.

It's not a perfect solution, but a work in progress that i'm currently using in my backing bean:
private RichTree navTree;
private void exitContainers() {
boolean success = false;
while (!success) {
try {
navTree.exitContainer();
} catch (Exception e) {
success = true;
private void clearDisclosedRowKeys() {
if (navTree != null && navTree.getDisclosedRowKeys() != null) {
RowKeySet rks = navTree.getDisclosedRowKeys();
Iterator rksIter = rks.iterator();
while (rksIter.hasNext()) {
exitContainers();
List<Integer> rowkey = (List<Integer>) rksIter.next();
List<Integer> newRowkey = new ArrayList<Integer>();
for (Integer row : rowkey) {
if (navTree.isRowAvailable(row)) {
navTree.setRowIndex(row);
navTree.enterContainer();
newRowkey.add(row);
} else {
// Row is no longer available
break;
if (newRowkey.size() == 0) {
rks.remove(rowkey);
} else {
rowkey.clear();
rowkey.addAll(newRowkey);
Whenever you make a 'delete' or 'move' in the tree, call clearDisclosedRowKeys(), it will remove anything that's no longer valid, so your tree won't collapse, and you won't get the error anymore.
I took out my logging and debug statements, but essentially this just gets all the rows, checks to see if they're valid, and if so creates a new RowKeySet with the valid rows in it.
Of course make sure you have the setNavTree and getNavTree accessor's created and that they're bound in your JSFF, otherwise navTree will always be null.
I haven't yet found a way to 'nicely' find out if you're at the top level container, so i'm relying on an Exception to occur to give me that information, if anyone knows a better solution please feel free to share it.

Life and work event for any country other than US.

Hello,
I have to implement ESS for UAE.
In ESS we did all country specific settings and thus our "Address" application in Personal Information section is working fine now.
Now we have to implement the life work event section "My first days".
There we are getting "Address" application in left panel.
Now when I am clicking in this application it shows me error :
Country/Structure do not match application country
So which means it requires some settings in guided procedure end in portal.
I am assuming ....Because our address application is already working fine in Personal Information section so same should also work in My first days section using existing configuration settings of R/3.
So I went through below wiki page :
http://wiki.sdn.sap.com/wiki/display/profile/LifeandWorkEvents(LWE)-Other+Countries
In the above page there is a section to update parameters in guided procedure process for address.
GP Context = X
PT Family Service = EMPLOYEEPERSINFO_FAMMEMBER_PT_05 - this parameter is going to be created in the backend (transaction PTARQ)._
I am making changes to existing Life and Work events - US only. (for testing purposes)
In my case I only updated the Address service :
sap_xss_service
sap_xss_menusrv
With the address service from R/3 which is in my case running under personal information section.
But still I have been receiving the same error under My First Days address section.
In the above wiki page there is a line as below :
VERY IMPORTANT: the parameters need to give in action, after in the block, after in the main block, and after in the process (THIS IS CRUCIAL).
I feel this is where I am missing something.
What does this line mean...
Can anybody help me out with the same...if you have implemented life and work event for any country other than US.
Edited by: Saurabh Agarwal on Apr 10, 2011 3:03 PM

Hello,
In continuation of my question I have also been following below sap Note :
929447 - Adopting Life and work events for countries other than US
In the above note there us a section which confuses me :
Page 3 - Home and Area page customizing
Step2 - In this step they say that we have to make an entry in
IMG node access: Cross-applicaiton components -> Homepage framework ->Services -> Define Country-Specific Services (Add Entries) - (Table:V_T7XSSSERSRVCG)
as
Service Key:EMPLOYEE_LIFEWORK_FIRSTDAYS
Country grouping: 01
Link Resource:EMPLOYEE_LIFEWORK_FIRSTDAYS_DE_SERVICE
I believe it should not be for FIRSTDAYS....it should be about service which is actually throeing the error "Countr/structure does not match"
i.e. in this note case it should be :
EMPLOYEE_PERSINFO_ADDRESS05

[svn:osmf:] 14306: PARB changes: Merge seekBegin and seekEnd event types into a single seekingChange event type .

Revision: 14306
Revision: 14306
Author:   [email protected]
Date:     2010-02-21 10:48:21 -0800 (Sun, 21 Feb 2010)
Log Message:
PARB changes: Merge seekBegin and seekEnd event types into a single seekingChange event type. Add seeking as a getter to the SeekEvent class. Update test code and samples accordingly.
Modified Paths:
    osmf/trunk/apps/samples/framework/CuePointSample/src/CuePointSample.mxml
    osmf/trunk/apps/samples/framework/DynamicStreamingSample/src/DynamicStreamingSample.mxml
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/src/AkamaiPluginSample.mxml
    osmf/trunk/apps/samples/plugins/CaptioningSample/src/CaptioningSample.mxml
    osmf/trunk/framework/OSMF/.flexLibProperties
    osmf/trunk/framework/OSMF/org/osmf/elements/DurationElement.as
    osmf/trunk/framework/OSMF/org/osmf/elements/ListenerProxyElement.as
    osmf/trunk/framework/OSMF/org/osmf/elements/compositeClasses/CompositeSeekTrait.as
    osmf/trunk/framework/OSMF/org/osmf/elements/compositeClasses/ParallelSeekTrait.as
    osmf/trunk/framework/OSMF/org/osmf/events/MediaErrorEvent.as
    osmf/trunk/framework/OSMF/org/osmf/events/SeekEvent.as
    osmf/trunk/framework/OSMF/org/osmf/media/MediaPlayer.as
    osmf/trunk/framework/OSMF/org/osmf/metadata/TemporalFacet.as
    osmf/trunk/framework/OSMF/org/osmf/traits/SeekTrait.as
    osmf/trunk/framework/OSMF/org/osmf/utils/TraitEventDispatcher.as
    osmf/trunk/framework/OSMFTest/org/osmf/elements/TestDurationElement.as
    osmf/trunk/framework/OSMFTest/org/osmf/elements/TestParallelElementWithSeekTrait.as
    osmf/trunk/framework/OSMFTest/org/osmf/elements/audioClasses/TestAudioSeekTrait.as
    osmf/trunk/framework/OSMFTest/org/osmf/media/TestMediaPlayer.as
    osmf/trunk/framework/OSMFTest/org/osmf/traits/TestSeekTrait.as
    osmf/trunk/framework/OSMFTest/org/osmf/utils/DynamicSeekTrait.as
    osmf/trunk/framework/OSMFTest/org/osmf/utils/TestTraitEventDispatcher.as
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/widgets/RecordButton.as
    osmf/trunk/plugins/CaptioningPluginTest/src/CaptioningPluginTest.mxml
    osmf/trunk/plugins/MASTPlugin/org/osmf/mast/adapter/MASTAdapter.as
    osmf/trunk/plugins/MASTPlugin/org/osmf/mast/managers/MASTConditionManager.as

ls -l /var/run/lighttpd/
And how are you spawning the php instances? I don't see that in the daemons array anywhere.
EDIT: It looks like the info in that page is no longer using pre-spawned instances, but lighttpd adaptive-spawn. The documentation has been made inconsistent it looks like.
You will note that with pre-spawned information, the config looks different[1].
You need to do one or the other, not both (eg. choose adaptive-spawn, or pre-spawn..not both).
[1]: http://wiki.archlinux.org/index.php?tit … oldid=8051 "change"

Adding keynotes and evening events to brainshare scheduler?

Just exported my schedule to get it into my calendar and found there are no
entries for keynotes and evening events to select from. Would make sense to
show them as well, I think. Could they be added for informational purposes,
maybe?

In article <UiR_v.5526$[email protected] m>,
Kgroneman wrote:
> since there is nothing in
> those timeslots that would conflict with the keynotes and evening
> events, I doubt it creates a scheduling problem.
But where was I supposed to go? Need details in our handbrains to
point us in the right direction.
We are doing our scheduling thinking upfront and then level it to our
able electronic assistants to guide us, after all we do call them
smart.
Andy of
KonecnyConsulting.ca in Toronto
Knowledge Partner
http://forums.novell.com/member.php?userid=75037
If you find a post helpful and are logged in the Web interface, please
show your appreciation by clicking on the star below. Thanks!

Warning Event ID 6006 & 6005 and Information Event ID 6000 & 6003

Similar Messages

Maybe you are looking for