WARNING: Failed to check if shared library {0} exists.

Hello
I see this warning when I deploy to a WAR file that bundles ADF Library Jar files. Could anyone point me in the right direction ?
oracle.webcenter.dt.config.ear.util.WeblogicAppUtil weblogicAppNodeExists
WARNING: Failed to check if shared library {0} exists.
java.lang.NullPointerException
at oracle.webcenter.internal.dt.config.ConfigUtils.newURL(ConfigUtils.java:101)
at oracle.webcenter.dt.config.ear.util.WeblogicAppUtil.weblogicAppNodeExists(WeblogicAppUtil.java:258)
at oracle.webcenter.dt.config.ear.util.WeblogicAppUtil.sharedLibExists(WeblogicAppUtil.java:175)
at oracle.webcenter.dt.config.ear.util.WeblogicAppUtil.webCenterSharedLibExists(WeblogicAppUtil.java:475)
at oracle.webcenter.internal.dt.packaging.WebCenterDeploymentListener.isWebcenterApp(WebCenterDeploymentListener.java:128)
at oracle.webcenter.internal.dt.packaging.WebCenterDeploymentListener.willDeploy(WebCenterDeploymentListener.java:102)
at oracle.jdevimpl.deploy.fwk.ListenerSupport.fireWillDeploy(ListenerSupport.java:198)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:88)
at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:442)
at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
at oracle.jdevimpl.deploy.BuildSystemFacade.deploy(BuildSystemFacade.java:46)
at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.buildDepProfile(UnifiedBuildSystem.java:847)
at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.buildProject(UnifiedBuildSystem.java:883)
at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.buildAll(UnifiedBuildSystem.java:945)
at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.run(UnifiedBuildSystem.java:1234)
Dec 16, 2009 12:50:25 PM oracle.webcenter.dt.config.ear.util.WeblogicAppUtil weblogicAppNodeExists
user515719

Bump

Similar Messages

Failed to check if shared library [{0}] exists.

Hello
I see this warning when I deploy a project to a ADF Library Jar. Could anyone point me in the right direction ?
oracle.webcenter.dt.config.ear.util.WeblogicAppUtil weblogicAppNodeExists
WARNING: Failed to check if shared library [{0}] exists.
java.lang.NullPointerException
at oracle.webcenter.internal.dt.config.ConfigUtils.newURL(ConfigUtils.java:101)
at oracle.webcenter.dt.config.ear.util.WeblogicAppUtil.weblogicAppNodeExists(WeblogicAppUtil.java:258)
at oracle.webcenter.dt.config.ear.util.WeblogicAppUtil.sharedLibExists(WeblogicAppUtil.java:175)
at oracle.webcenter.dt.config.ear.util.WeblogicAppUtil.webCenterSharedLibExists(WeblogicAppUtil.java:475)
at oracle.webcenter.internal.dt.packaging.WebCenterDeploymentListener.isWebcenterApp(WebCenterDeploymentListener.java:128)
at oracle.webcenter.internal.dt.packaging.WebCenterDeploymentListener.willDeploy(WebCenterDeploymentListener.java:102)
at oracle.jdevimpl.deploy.fwk.ListenerSupport.fireWillDeploy(ListenerSupport.java:198)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:88)
at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:442)
at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
at oracle.jdevimpl.deploy.BuildSystemFacade.deploy(BuildSystemFacade.java:46)
at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.buildDepProfile(UnifiedBuildSystem.java:847)
at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.buildProject(UnifiedBuildSystem.java:883)
at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.buildAll(UnifiedBuildSystem.java:945)
at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.run(UnifiedBuildSystem.java:1234)
Dec 16, 2009 12:50:25 PM oracle.webcenter.dt.config.ear.util.WeblogicAppUtil weblogicAppNodeExists

Bump

I am trying to move my itunes library from my old pc to my new imac, home sharing is on and I can see the shared library. My problem is that when I check the shared library to import it to my imac I cannot import it. Can anyone help me?

I am trying to move my itunes library from my old pc to my new imac, home sharing is on and I can see the shared library. My problem is that when I check the shared library to import it to my imac I cannot import it. Can anyone help me?

You need to transfer the iTunes Library from the most recent backup you made before the hard drive was replaced.
You can't transfer the full iTunes Library from the iPad back to iTunes.
There are third-party Windows applications that will transfer data from an iOS device, but they don't re-create the iTunes Library exactly as it was before.

Failed to load shared library

I am getting a "Failed to load shared library myDLL.dll:myFunction:C on RT Target Device" error when attempting to deploy a VI which contains a call to myDLL on a RT PXI. If I open the VI with the Call Library Function Node and simply reselect myDLL within the Library name or Path box and save the VI, it will then deploy without error. This continues to work until I start changing the VI at which point I attempt to deploy the VI again and get the failed to load error. Once again I open the VI, reselect myDLL, save, and the failed to deploy error goes away.
Does anyone have any ideas about whats going on here?
Thanks in advance
Kevin C.

Hi Bob,
Thanks for responding. I am running LabVIEW 8.5 and running on an 8106 Embedded Controller. Unfortunately, I cannot post my DLL however, I did some troubleshooting and found that the issue seems to be that myDLL calls another one of my DLLs which doesn't seem to be loaded onto the RT box. If I deploy and run a VI which calls this second DLL and then run my original VI, it deploys without issue. I guess I can understand why it didn't work in first place, since the 2nd DLL is not called from any VI and only called from myDLL, however I don't understand why simply opening the VI which contains the call to myDLL and reselecting it fixes the problem. Also I have run the DLL thru the 8.5 DLL checker and it says that the DLL is OK, in fact the DLL checker new that myDLL had a dependency on the second DLL. Is there something that I can do other than pre-deploy the second DLL to the RT box to get around this issue?
Thanks again,
Kevin C.

RealTime - Failed to load shared library

Hi everyone,
I'm working with the cRIO 9074 system and programmed a ANC application with LabView. Yesterday I tested my application the first time but it didn't work as expected. Because of my testing- and developing-place are different I have to carry the cRIO-System and my laptop between them. So I just disconneted the powersupply and the networkcable. Then 10min later I tried testing again but I got an error. Today in the morning I got the same error like yesterday, which is the following one:
"Failed to load shared library AdaptivFilter. Ensure that the library is present on the RT target. Use MAX [...]"
I reinstalled the NI software (more than once) how I was adviced with MAX but it didn't fix the problem, maybe the AdaptivFilters-library was not included.
In the project-explorer a library called "NI_AdaptivFilter.lvlib" is included and I also found the path of the file on my harddrive.
It drives my nuts that it worked and than 10min later it doesn't.
I hope you could help me, thanks.
Schue
Attachments:
project_explorer.PNG ‏71 KB
Unbenannt.PNG ‏57 KB

Hi Bob,
Thanks for responding. I am running LabVIEW 8.5 and running on an 8106 Embedded Controller. Unfortunately, I cannot post my DLL however, I did some troubleshooting and found that the issue seems to be that myDLL calls another one of my DLLs which doesn't seem to be loaded onto the RT box. If I deploy and run a VI which calls this second DLL and then run my original VI, it deploys without issue. I guess I can understand why it didn't work in first place, since the 2nd DLL is not called from any VI and only called from myDLL, however I don't understand why simply opening the VI which contains the call to myDLL and reselecting it fixes the problem. Also I have run the DLL thru the 8.5 DLL checker and it says that the DLL is OK, in fact the DLL checker new that myDLL had a dependency on the second DLL. Is there something that I can do other than pre-deploy the second DLL to the RT box to get around this issue?
Thanks again,
Kevin C.

Itunes in windows fails to play Shared Library's Video!!!

Hello, I'm not sure if this is a bug but I have thoroughly tested it in both Vista and XP.
If I share my Itunes' Library and access it from another PC (vista or XP tested), it can list the tvshows/movies/podcasts just fine, but when I play it, nothing happens. I see some network activity for brief 3-4 seconsd and then it stops.
The videos were imported into itunes on the macbook pro just fine (meaning the encoding is fine, MP4) and when I copied those videos file manually over to the PCs, the play fine too. Even if I share them over the network through SMB, they play fine streaming. They only fail when I play them through itunes' shared library.
95% of the videos fail, except for a few that I noticed and have not yet figured out a pattern. Videos that seems to work are 1) the downloaded guided tour video of iLife08 2) the mac tips podcasts from apple 3) a movie I converted using Quicktime into MP4 from divx
Any ideas?
Message was edited by: aapl.up
Message was edited by: aapl.up

This may indeed be the Windows version of iTunes (and QuickTime) being fussier than the Mac version.
However I did in Windows XP, take a video that would not work, export it using QuickTime Pro (on Windows) with the Prepare for Streaming option ticked, and the resulting video did then work, also taking the same original video that did not work and in iTunes 7.4.3 (on Windows) and converting it to AppleTV format, also produced a version that then did work for iTunes Sharing.
A video can be in MPEG4 format (or H.264) and meet the Apple specifications for iPod or Apple TV resolution, but it is quite possible it may not have been 'prepared for streaming'.
There have been similar reports from FrontRow (in Mac OS X) users accessing videos from an iTunes Share and having problems (typically very poor performance) and when they used the prepare for streaming option the problems went away.

I used to look my photos in my tv using apple tv, now i can't when i access through apple tv/ computer/ my library photo option is not available, i check home sharing and which photos i'm sharing from my mac/itunes but i still can share photos w/apple tv

I used to look my photos in my tv using apple tv, now i can't when i access through apple tv/ computer/ my library photo option is not available, i check home sharing and which photos i'm sharing from my mac/itunes but i still can share photos w/apple tv

Morning JJFH,
Thanks for using Apple Support Communities.
If after setting up Home Sharing, you cannot access your shared iTunes library over your home network from your Apple TV, take a look at this article:
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Best of luck,
Mario

Loading shared library failed: Reports fatal: libgcc_s.so.1 : open failed

Hi,
I am developing a shared library in solaris. While loading the shared library it reports "ld.so.1: tn-tipc-config-bin: fatal: libgcc_s.so.1: open failed: No such file or directory". I noticed that libgcc_so.1 is available at /usr/sfw/lib. But this library is missing in some solaris build/install configuration. I want my library to loaded in any solaris system. So I want to reduce dependency over libgcc_s.so.1. By looking at the objdump of my shared library, I found that references to
__register_frame_info and __deregister_frame_info which are provided by libgcc_s.so.1. Looks like these references are added by gccfss compiler since I dont call these functions in my code. Please suggest a method to remove reference for these functions.
Thanks
Shankar

If you don't want to bring libraries your app depends on with you, the only choice you have is linking statically. It is a very bad idea to manually "detach" compiler-supplied library from the application unless you know exactly what you are doing. Even if your library does not call anything directly, initialization routines inserted by compiler may need routines from that library (just as an example).

CRIO Fails to Load Shared Library

All,
I'm getting an odd error every other time I tried to load my code onto a cRIO in the dev environment.
Deploying NI_AALPro.lvlib:Linear Fit (LS).viNI_AALPro.lvlib:Linear Fit (LS).vi loaded with errors on the target and was closed.
LabVIEW: Failed to load shared library lvanlys.*:LinFit_head:C on RT target device.
This VI works the first time, and then fails to run the second time you hit run.
If I reboot the device this corrects the problem, but I have to say this bug costs me quite a lot of time.
Regards,
Ken

xkenneth,
Did that solve your problem? If so, is it reproducible with a small project?
Verne D. // LabVIEW & SignalExpress Product Support Engineer // National Instruments

Failed to load shared library on RT target device.

I am using 7030 RT target. When I use Call Library Function Node with specified DLL library the application is working properly on Windows target. When I try to download the application on RT target PCI 7030 I get the following error messages: Failed to download useDLL.vi. Failed to load shared library EasyDLL.dll on RT target device. Because the application (attached to the question) is distributed with NI product I would suppose it is written OK. I would like to know what restrictions are imposed on DLL libraries which should be targeted on PCI 7030 RT target. Why the application useDLL.vi with EasyDLL.dll can't be loaded on PCI 7030? Does it mean that Call Library Function Nodes are not compatibel with PCI
7030 target?! Thank you for any explanation.
Attachments:
useDLL.vi ‏15 KB
EasyDLL.dll ‏80 KB

OK I downloaded your files and tried them with a PXI real time controller and the error you mentioned happened for me as well. After digging for awhile, here's the best explanation I could find:
1 - useDLL is calling other DLLs that are failing to download
2 - useDLL is accessing some of the Win API that is not supported by the RT OS.
Read more about this at:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=506500000008000000...
~cheers,
Darin G

[ERROR] - Runtime Shared Library Preloading Warning

Hey there guys, I have a question that probably has a very easy answer, but after searching online for a while I couldn't figure out just how to fix it.
Anyways the problem is this, when I run it, it gives me this warning and then the when i click "OK" it startes playing the movie..but when i upload the content i dont see it woking
I assume I'm receiving this warning because I'm using Adobe Flash Professional CS5 if this helps.
Thanks very much for any advice you guys have.
-=-=-=-=-=-=-=-
The warning:
Runtime Shared Library Preloading Warning
Your content will not stream. Runtime Shared Library (RSL) preloading will require all of your content to download before the first frame will play.
To prevent this you can chane the Runtime Shared Library Library Settings in the Advanced ActionScript 3.0 Settings dialog which can be raised from the Publish Settings dialog.
The Runtime Shared Libraries being preloaded are:
textLayout_1.0.0.595.swz for TLF Text

Since my presentation requires hiding a text field behind "revealer bars", unlayering was not going to make it in my situation. By some kind of good fortune I had another FLA file that behaved properly. I found that it had the "Merge with code" switch set, but making that change to my current file did not correct the problem. It appears that the flash data base became corrupted and I had to re-build the entire file from scratch.
Here is something that hints ( but doesn't admit ) that you can corrupt the fla file:
Home / Using Flash Professional CS5 / Text
Working with Text Layout Framework (TLF) text
Converting between Classic and TLF text
When you convert a text object from one text engine to the other, Flash preserves most of the formatting. However, because the text engines are different in their capabilities, some formatting may be slightly different, including letter spacing and line spacing. Inspect the text carefully and reapply any settings that have been changed or lost.
If you need to convert text from Classic to TLF, try to do so only once rather than converting back and forth more than once. The same is true for converting TLF text to Classic text.
When converting between TLF and Classic text, Flash converts text types as follows:
TLF Read Only> Classic Static
TLF Selectable > Classic Static
TLF Editable > Classic Input
Until I become very certain that I am on the right path, I am saving a new sub-version of the file after every small advance in the restoration. If something I go breaks the "streamability", I Quit without saving then start up again with the last successfully saved version. ( I haven't yet found the "Revert to Last Saved State" menu pick. )
Hope this helps.

LabVIEW: Failed to load shared library nisysrpc.out

Errored were detected in the target log when connecting to the target:
LabVIEW:Failed to load shared library nisysrpc.out.Ensure that the library is present to the RT target. Use MAX to install NI software or FTP to transfer custom libraries on the target .
labview 2012
sbrio 9636
已解决！
转到解答。
附件:
Shared Library.jpg ‏3797 KB

这个错误是因为RT系统启动部署时缺失库文件或者加载库文件失败导致的。
库文件加载失败原因有很多，而且就算把库文件重新添加进去可能也不能解决问题。建议你重装sbRIO 9636的RT系统，RT重装系统很快，10分钟就能完成。
在MAX里面远程系统下找到你的9636，右键选择格式化。格式化完成后展开9636，右键软件选择更改删除软件，此时把软件再重新装进去就可以了。

Adding shared library to project fails

We've created a shared library of content and look & feel updates to Portal 9.2 mp1.
Started by creating a new web and app project. Made sure it works in a test portal.
I followed Floyd Jones instructions on creating shared J2EE libs.
Created a "simple project" copied the files (with exception of the webcontent folder - but all its contents). Created the Manifest file. Saved it as a .war in the modules folder.
Create a new web and app project for testing. When I pull in the library, portal doesn't seem to work following the instructions (Can't find WebLogic J2EE Libraries option to add). So I add the J2EE libraries via the project properties. When I link to the war file, the manifest information does not appear. Instead just the name of the actual .war file.
I can add the versions. Workshop requires me to edit the weblogic.xml file to pull in the library.
But no luck. My suspicion is there's something wrong with the library as it can't read the manifest. When I open the manifest inside the .war file all the information is there.
Any idea what I'm doing wrong?
Thanks...martin

you'll have to physically put all the songs on to the computer that doesnt have it. to do this go to start>my network places and if you are on a network his computer should show up. You'll probably need to enable sharing for your My Music folder (just assuming thats where you music is at) and just copy it over.

Runtime Shared Library Preloading Warning

Hi there, I just finished a project and added a preloader to it (in Flash CS5 AS3) and I get this error:
Your content will not stream. Runtime Shared Library (RSL) preloading will requiere of your content to download before the first frame will play.
To prevent this you can change the Runtime Shared Library Library Settings in the...
The Runtime Shared Libraries being preloaded are:
textLayout_1.0.0.595.swz for TLF Text.
I am using this preloader on a different project and I dont get this error.

I have the exact same question.

Import / Export Fail .. shared library not loaded

I have installed Oracle 8i (8.1.0.2) on Redhat Linux 6.1 The installation and DB creation went off fine. I am able to run and connect from SQLPLUS Svrmgr etc
But the problem i am facing is on running IMP or EXP it give the error
"Error in loadinf shared libraries. libclntsh.8.0 cannot open shared object file. no such file or directory"
I checked for the file and it is present in the $ORACLE_HOME/lib directory.
Any ideas what have i missed ?
TIA
Charanjiv
null

Hi,
U should set env. variable LD_LIBRARY_PATH. It is like PATH variable, can be pointed, where the shared libraries are existing.
I think, this file may be calling some other sahred libraries, existing in some other directories.
Do these things.
1. At ur HOME directory, by using find command findout, where are shared libraries are existing.
find . -name "*.so" -print
Then u will get the path name
2. If there is any other paths, add these paths with this env. variable. Using this command u can find out.
echo $LD_LIBRARY_PATH.
Pls keep this env. variable in profile file.
With regards,
Boby Jose thekkanath,
Dharma Computers(P) Ltd.
Bangalore-India

WARNING: Failed to check if shared library {0} exists.

Similar Messages

Maybe you are looking for