Warning for header po delivery cost but with only free of cost items

Dear.
Do you know If exist a chance to send a warning If I insert in a purchase order a header delivery cost condition type but the items of this po are only free of cost ?
Thanks.

Dear Chris,
As per my knowledge this cannot be done in standard SAP because
When we create PO line item with Free goods indicator set automatically item conditions tab correctly disappears
But the header condition tab always will be there because " In a PO you may have 6 line item out of them 3 is free goods and 3 is not " That is the reason Header conditions tab is there.
But you don't really have to worry because if you have only 1 item with Free goods indicator set and you enter a amount for header freight you will find the field condition value by default Blank and you cannot enter a value there , so no need to worry no postings will be made.
Now say you have PO with 3 line items (out of which1 with Free goods indicator) and you enter a header freight 100 EUR
You will find now that field condition value is not becoming blank and the amount 100 EUR is distributed among 2 non free Goods item proportionately.
Hope it clarifies

Similar Messages

  • How to make 1D Array but with only one element filled in Real Time

    Hi folks,
    here I am with another question. I want to implement an prediction discrete state space observer which is going to run on a CRIO real time target. I am going to do it just like in the example which comes with LV.
    I have some questions regarding the input and outputs which in the example those are "dummy".
    My model is a SISO model, but the function "Construct SS model" returns parameters (A,B,C,D Matrices) as 2D arrays, so once you connect the cluster model into the Discrete Observer model, it takes y and u as 1D arrays despite of the fact that there is a SISO model.
    I realized that the function I am using in the simulations, uses 1D arrays but with only one element filled:
    Does anyone knows how to implement such 1D arrays in Real Time? I guess the way to do it is preallocating one array of zeros of size 1, and then recirculating it through some SR, and replacing the element with my real input and output, but at the dummy.vi, they are using a simple "build array"
    function.

    Ok, I did it that way. But I am facing another problem right now...
    At some point the Discrete Observer return a NAN array, you will see the code in the code snippet?
    I get rid of that component by component, but the observer gets "stuck" in it. So my Control law is zero... but the state stimate is NAN.
    Also I am attaching the VI.
    I do not know why, since in the simulation program all runs well. any thoughts? Maybe the internal numeric precision of the State Space Model?
    Attachments:
    RT - Pole Placement + Complete Observer.vi ‏40 KB

  • Vendor invoice for sales order delivery cost condition type

    Dear SAP guru,
    We have a scenario where we have added certain delivery cost in the sales order as condition type. There will be an accrual posting out of this condition type. We have defined the vendor code in the condition record.
    The question is how to generate an invoice on this vendor with reference to Sales order, as there will not be any purchase order for the delivery cost.
    Thanks in advance.
    Rama

    did you already apply note 1585042
    Symptom
    You create a Sales Order with multiple third-party items.  The system
    automatically generates an MM Purchase Requisition with multiple line
    items.  Each of these line items can have a different fixed vendor
    (field EBAN-FLIEF).
    In the Customizing transaction VOV7, the Sales Item Category (usually
    TAS for Third Party) has the field ALEKZ 'Create PO Automatically'
    selected.  Therefore, one or multiple follow-on Purchase Orders will
    also be created from the Requisition data during the same Sales Order
    creation workflow.  The system creates a separate Purchase Order for
    each fixed vendor (supplier) found among the Requisition items.
    During this ALE PO creation, if one of the Requisition items fails to
    successfully create a PO, the next relevant PO created may have an
    incorrect vendor in its header.  The vendor in the PO header may not
    match the fixed vendor that was designated in the Requisition line item.
    Solution
    Implement the attached code corrections.   After this correction,
    regardless of whether one of the Requisition items fails to generate a
    PO, any PO that is successfully created during the process will have the
    correct assigned vendor.

  • Tab option for choosing Planned delivery cost in Miro screen

    Hi all
    I'm a new user in SAP system and I have a question as follows:on Miro screen, I do not see the tab, select Planned delivery cost, I think someone did somthing in  system and made it hidden.it displayed above the layout tab, so  I want to know how displays it on the screen?
    Thanks for your help

    Dear,
    Please go into transaction MIRO
    then on item level u can see One option with 3 selection criteria
    1) goods/serv item
    2) planned delivery cost
    3) goods service + planned delivery
    please select the 2 option
    regards
    amey

  • Enabling Warning for Application that is not compatible with Ipod Touch

    Sorry if this has been asked before. Searching for prior posts about it, I ended up with pages of Compatibility Mode Posts.
    Not thinking, when iTunes asked me if I wanted to disable the warning when an application was not compatible with my Ipod Touch, I said Yes. Searching through all the settings,Preferences and properties (or even in Regedit), I see no way to re-enable this option. Kinda nice to have the warning so I know it did not install, and would like to get it back. About the only thing I saw remotely close was the option to "Reset all dialog warnings" in the preferences menu, and it didn't work.
    Any thoughts???

    Rebuilding your iTunes preferences files might get that back for you, Pa.
    The technique you need for that is described in the "Remove iTunes Preference files" section of the "User-specific troubleshooting" section of the following document:
    [iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues|http://support.apple.com/kb/TS1717]
    Before starting out on that, set the PC up to view hidden files and folders, as per the description at the beginning of the "User-specific troubleshooting" section.
    *Some heads-ups before proceeding*
    Be careful of any custom preferences (EQ, imports, etc) you have set up. Take a note of those, because rebuilding the relevant prefs returns all such prefs to their default settings. You may need to set up any such preferences all over again.
    You may also need to reinstall any third-party plugins afterwards.
    Things to expect during the pref file rebuild ... moving one set to the desktop (on XP) causes the setup assistant to run during the rebuild. Avoid saying yes if it asks you to import all the media files on your PC into iTunes. Otherwise, you'll end up duplicating all your content in your iTunes library. Moving the other set of prefs to the desktop (on XP) means that you have to agree to the licence agreement again.
    Message was edited by: b noir

  • Hi, i have been searching high and low for a new keyboard for an HP DV7 6B51EA but with no success

     HP DV7 6B51EA but with no success..............................I have tried every site i can think off, any idea's.  Great computer, shame about the keyboard...
    Hopefully you can help 
    Many thanks in advance

    Hi,
    We do not have many choices with laptop keyboards that why 95% of my time I use external keyboards (for all my laptops). This is a list for dv7 machines:
    Keyboard
    NOTE: The keyboard spare part kit includes a keyboard cable.
    For use with all computer models: For use in Italy 639396-061
    For use in Belgium 639396-A41 For use in the Netherlands 639396-B31
    For use in Canada 639396-121 For use in Portugal 639396-131
    For use in the Czech Republic 639396-221
    For use in Russia 639396-251
    For use in Denmark, Finland,and Norway 639396-DH1
    For use in Slovenia 639396-BA1
    For use in France 639396-051
    For use in Spain 639396-071
    For use in Germany 639396-041
    For use in Switzerland 639396-BG1
    For use in Greece 639396-DJ1
    For use in the United Kingdom and Singapore 639396-031
    For use in Hungary 639396-211 For use in the United States 639396-001
    For use only with computer models equipped with an Intel processor:
    For use in Saudi Arabia 639396-171
    For use in Bulgaria 639396-261
    For use in South Korea 639396-AD1
    For use in India 639396-D61
    For use in Taiwan 639396-AB1
    For use in Israel 639396-BB1
    For use in Thailand 639396-281
    For use in Japan 639396-291
    For use in Turkey 639396-141
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Convert stereo to mono, but with only left side

    I have some mp3 files that are stereo, but I only want to hear the left. I know I can change the balance through System Preferences, but I want the left side to be coming through both speakers. Also I assume I could do this with Garageband, but there are a lot of files, and I'd rather not do that for all of them.
    Thanks!

    You don't want to hear the right channel at all or you want to combine both channels and listen to it with your left ear only?
    You can convert the files to mono using iTunes.
    iTunes prefs -> Advanced - Importing.
    Click the drop down next to Setting and set it to Mono.
    Now select the files you want to convert, then menu Advanced -> *Convert selection to...*
    This will make a new copy of the selected files in Mono.
    The original files will remain unchanged in iTunes.

  • HT1473 Often times when I copy a CD into my library it breaks the CD into more than one Album, all with the same name but with only a few of the songs on each. This happens whenever the CD has music with more than one artists...like maybe duets.

    Often times when I copy a CD into my library it will break my CD into multiple albums in my library, each with only a few songs.
    Usually this is because there might be songs where the artists has other artists in the song.
    How can I compile all of the different albums (all with the same name by the way) back into one as was the original disc?

    Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
    tt2

  • I have Verizon FiOS service for phone, internet and TV but I only have one TV hooked up for it for just basic cable service with no DVR and no need for widgets.  Can I use an Airport Extreme as my router and not use the FiOs router?

    I want to use an Airport Extreme as my router.  I currently have a Verizon FiOS router.  I have Verizon for phone, internet and TV.  However, TV-wise, I just have a basic service for one TV with just a regular box.  No HD, no DVR.  Don't need access to a menu, widgets, on-demand.  Can I eliminate the FiOS Router and just use the Airport Extreme and still have phone and internet?

    I know that it will increase my wireless coverage in my house but will it increase the speeds?
    Not sure what you are asking here.  The AirPort Extreme is only going to be as fast as the Internet connection that it receives.....which is 75/75. It cannot take a 75/75 connection and make it go any faster.
    If you locate the AirPort Extreme in an area where you need more wireless signal coverage, the AirPort Extreme would deliver 75/75 in that area.  But, keep in mind that the AirPort Extreme must connect to the FIOS router using a permanent, wired Ethernet cable connection.
    If you are asking if the AirPort Extreme can wirelessly connect to the FIOS modem router, and extend the FIOS wireless network, the AirPort Extreme would not be compatible with a FIOS product for that purpose.

  • I just bought an app, $ 29.99, I installed it, but apparently only free version is installed. Apps asking me to buy the full version for 39.99, I cant find the way to communicate with app store. Help me please

    I just bought an App, $29.99. I got the free version apparently. Every time i try to use it message  says buy the full version for 39.99. What i am suppose to do now????

    Excuse me moinpara, but I know how you feel and I have been there many of times. It is not Itunes fault that your purchase inquiry was proposed to you as invalid, rather much more sort of than rather it being. If this happened to me, I would research that App, try to find out what went wrong. Heh, if you or I were to ask myself I could either tell you that you are putting yourself in a hole! Woah, but now this seems to me like something that would be simple to just contact an iPhone or apple associate and tell them why this happened to you, especially right after Christmas, or whatever religious holiday you choose to follow
    If I were to be in your shoes I would of spent the money in the itunes store on something else! But that is just me.

  • My wifes iPhone is listing two numbers for one contact in iMessage but she only has one number for her in her contacts.

    My wife was playing with her iPhone 5 today and decided she wanted to text one of her friends. Upon typing in their name she noticed that it listed them twice and the second one had another number she hadn't put into contacts. I checked her contacts and there is only one entry for this person and only one number. It is linked to facebook but facebook's information is exactly what we already have. So the issue is, where did this other number coming from and why can't I find it anywhere in the phone to delete it..

    ACtually that's the problem. The friend she was going to text doesn't have an iPhone nor has she ever had an iPhone. She has a *sighs and shakes head* Samsung galaxy s3. So that wouldn't be the problem. The only thing that I can think of is that her friend changed her number on Facebook and its like a bad cookie or something that's causing the number to show up on her phone. I also wend to the finder from her home screen on her iPhone And searched for the incorrect number and it didn't return any results.

  • Why is my iCloud backup for photos 3.3 Gbs but I only have 12 photos in my camera roll?

    After purchasing my iPhone 4S I performed a restore from backup that I had from my iPhone 4 (running iOS 4.3.5). Prior to doing this restore, I did not realize that my photos were not being synchronized from my iOS device and saved in that backup. So, the hundreds of photos I had on my iPhone 4 were lost in the transfer to my 4S; but then I noticed something odd. Upon closer inspection of my iCloud backup, my storage usage says my camera roll is taking up 3.3 Gbs of my backup! When I did the backup, I had only taken about 12 pictures on my 4S, there was absolutely no way those photos were taking up 3.3 Gbs of space. I was hoping that after synchronizing with iCloud that I would see all my old photos slowly pour in from the Photo Stream; but to no avail.
    Is it possible that my iPhone 4 photos were in fact carried with that restore from backup, but are not showing up in my camera roll? If so, how do I retrieve my photos? So many lost memories!

    That's odd. I can't imagine what else would take up so much space.
    Have you any other Apps that have downloaded data
    ..  appdata and settings of apps, "preferences", saved games "levels reached" , and downlaoded stuff that are stored within an app ", for example videodownloading app that has stored content in the iOS are uploaded ..
    Apps themself /Books/Music/etc are not uploaded to your personal cloud, they are held back by Apple in the store for future re-downloading options. So this can't also be the culprit.

  • I was charged for the same app twice, but I only had enough money to purchase it once. I used a prepaid Mastercard, and cannot remove it from my account. I am also unable to download anything from iTunes. How do I fix this?

    The "none" option is nowhere to be found, and I can't remove my card. I don't really want to create a new account.

    You'll have to pardon my ignorance of some  computer terminology; I'm a retired manager and not a computer technician, hence my muddling up of client and server terminology.
    Re your comment about Port 339: I did qualify this with (?).  As I wrote, it all happened at lightining speed and the guy at the Genius Bar didn't bother explaining what he was doing.  Port designation contained 3s and 9s to the best of my recollection.
    That said, you seem to be spot on re setting up a 'dummy' client in Mail.  I set it up as you suggested and I can send to and receive from this client without a problem.  You appear to have identified the solution, notwithstanding the claims of the ISP's 'experts'.
    The next problem I have now is sorting out my wife's mailbox that is so troublesome whenever I set it up on Mail.
    All the other set-up advice to date yielded a similar result; inability to send from my account to her inbox.  Perhaps deleting her details from the account altogether and setting them up again from scratch may be the solution and I shall try that in due course.  The impediment that I have with this at the moment is that my ISP admits that it has 'a technical problem with its email servers' and some of its related web pages that prevent my doing this myself.  I will have to go through the telephone 'help' line and ask the technician to set it up at their end on my instructions.  This has some disadvantages in that I have to divulge the password to the account to the operator rather than keeping it anonymous by doing it on-line.   You may have solved the problem, but until I can successfully sort out a working mailbox for my wife i cannot definitively say so.
    Many thanks for your perseverance.  You've made more sense than anyone else so far and that deserves some points, surely?

  • Search for text in PDF by VBA with only Adobe Reader installed

    My problem is widely known and frequenty posted, for instance:
    "Can anyone help me to open and search for a specific text string in a PDF document, return a true or false indicator (and nothing else)?"
    The answers mostly refer to and include
      Set gApp = CreateObject("AcroExch.App")
    which, as I understand, works only with a certain level of Adobe Acrobat being installed.
    My question now:
    I want to give this type of functionality (via an MSAccess Form, i.e. populate a ComboBox with PDF filenames which answer YES to certain text occurences)  to - say 20 - users in my company who have Adobe Reader 9.1 installed and not more.
    Bying this number of Adobe Acrobat licenses for just this purpose would be a heavy overkill which I just can't afford.
    Any suggestions? many thanks in advance.

    Now we would like to search in this PDF binary for an special text or string to use them for changing filename. Is there any way to do that?
    Based on your posting it sounds a bit like you're doing ABAP processing. However, I'll ignore that for now and just say that in the Java environment I have had good experience with the Java Library [iText PDF|http://itextpdf.com/]. I'm not sure what SAP offers in that area, but they must have something, because [TREX|http://help.sap.com/saphelp_nw70/helpdata/EN/a4/929d4206b70931e10000000a1550b0/frameset.htm] "understands" PDF (though that doesn't mean that you have a nice API for parsing PDFs).
    You probably investigated this already, but I'd take a look at possibilities to hook in before (or at the time) the PDF gets generated (might be easier to craft and export a filename there). Thanks to the [enhancement framework|http://help.sap.com/saphelp_nw70ehp2/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm] you usually have quite a few ways to get things done...
    Note that even if you're able to read a PDF, it doesn't necessarily mean that you can parse it the way you want. A silly example would be scanned pages, where the page is stored as an image and at best the scanner software runs some OCR (with possibly buggy results) to provide capabilities for searching the PDF. In your case that's probably not an issue, but still the question might be if the information you're looking at is structured enough to get it back...
    Cheers, harald

  • How high is to high for athie 1700+ on MSI KT3Ultra with only FSB?

    i have a Athlon XP 1700+  and its straped nicely to a MSI KT3 Ultra board with Volcano7+ cooler  i havent unlocked the chip yet nor do i know how to  and ive oc'd it to 1.8ghz and alittle higher befor but not to stable  best i can do stability wise is 1.75ghz  now i heard that ocing for long time can damage ur board and otehr parts since i use i believe 160 FSB an i overdoing it ? and if i unlocked the chip could i get higher speed? and will this do any damage to my board?  really the board is the only componetn i care about that Gforce 4 MX is a pice of crap  and my athlon got shiped with a bent pin!!!!!  but anyways what you think?

    you cannot hurt any thing ,just make sure you know how to clear cmos
    try 166 as that puts all pci slots and agp back to right speeds if it will boot at that,seen xp 1600 that will not a 1700 though

Maybe you are looking for