Warning: If you're too quick with your fingers, you can corrupt iWeb!
Okay, so here's what I did. Quite simply, I hit Command-H to hide iWeb while iWeb was in the midst of saving a domain file. From that point on, iWeb started acting more and more erratically, starting with the fact that it failed to save the domain file. It finally got to the point where it wouldn't successfully open (left it sitting on the spinning beachball for 15 minutes).
The problem was solved by simply reinstalling iWeb from the iLife disk. So, just a word of warning...
"samsung's bluetooth stack doesn't support HID and CM7 is the only ROM out there that redoes everything from scratch ENOUGH in order to not use the manufacturer's bluetooth stack)..."
Now it all makes sense....I tried out what seems like a gazillion ROMs before I realized CM7-based ROMs were the only ones that can support my keyboard.
Similar Messages
-
Why I got this email if I didn't schedule any storage plan ? This is the email I got;
On 10/07/2013 you are scheduled to be charged $20.00 for your 10 GB iCloud storage plan, but there is a problem with your payment information, Can someone help me ? I don't want to be charge for something I don't want to buy.You may want to do couple things
1. cancel auto renewal for icloud - instructions here -under downgrade storage
http://support.apple.com/kb/HT4874
2. change your payment info in itunes, to either none or other payment method - instructions here
http://support.apple.com/kb/ht1918 -
it wont let me download anything or update anything it says there is a problem with my previous payment thanks
Yes, you will need to pay it. Contact iTS for more info.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
My macbook pro keeps flashing an alert too quickly to read. How can I find out what it is to fix it?
I can't figure out even what application it is coming from. I'm assuming Finder, since it happens no matter what else is open or closed. The alret box pops up then vanishes before I can even get a look at it at all. It happens very erratically, and when I cleared out my user account, created a new one, it stopped for a few weeks before returning.
Any ideas?
2009 MacBook Pro running Mountain LionNo idea. Impossible to speculate without more information.
-
My ink seems to run out too quickly. I talked to a person from HP and I was informed that you should get at least 200 pages with 15 % coverage per cartridge. I'm not getting any where near that many pages. Is there a setting I can change on my HP Photosmart Printer to lengthen the life of my ink cartridge? I know I am paying less for my cartridge and thought maybe that might be a possibility. Has anyone else experienced this situation? Thanks in advance'
Strawbeary.What printer model? What operating system? Are you replacing the cartrdiges when they actually run out of ink or when the first low ink warning happens?
Printing in draft mode will use about half the ink of normal or best modes. Printing on photo paper uses much more ink than printing on plain paper for the same print.
Depending on your printer model the low on ink indicator is probably giving you an advance warning so you can have a spare cartridge on hand for when it is needed. On most printers you will not need to change the cartrdige until it actaully runs out as exidenced in changes in print quality.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
The security program wanted me to disable the add-ons. Has anyone else had this experience? I have selected the 'ignore' option until I can get some info.
Do you have the exact text of the Warning, and you can type about:addons into your address bar, press Enter, then click "Extensions" to see which add-ons you have installed.
-
I use this feature to view smaller fonts / e-mails frequently so will downgrade back to Firefox 3.x if it doesn't work in 4. This is the same feature that you would use on an iPhone for instance to enlarge the screen view. Also, I am a running the very latest version of Mac OS 10.6.7 but it also didn't work on the prior version (10.6.6 I presume). Thanks for any help.
Some gestures have been removed in Firefox 4.
You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
browser.gesture.pinch.in cmd_fullZoomReduce
browser.gesture.pinch.in.shift cmd_fullZoomReset
browser.gesture.pinch.out cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift cmd_fullZoomReset
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br />
* http://kb.mozillazine.org/about%3Aconfig -
I use an iPod4 Touch and am using IOS 6.1.6. Frequently I will be asked to sign in to my Apple account, but it is using an email I don't use with Apple. How can I get this to stop? This is happening repeatedly throughout the day. I don't have an Apple password for this email address, nor do I want one!
Maybe an App that needs updating was purchased by that account?
Could someone have installed an app not purchased with your account?
Can you post a screen shot of the message? -
Crystal Report Viewer (flash based) is displaying partial of the flash interface. It is working well on Firefox 3.6.7 and below but not in Firefox 3.6.8. It is also working well on Internet Explorer and Chrome and Safari. Please check if you can advise on this problem we are facing. Thank you.
== This happened ==
Every time Firefox opened
== Crystal Report Viewer (flash based) is displaying partial of the flash interface. It is working well on Firefox 3.6.7 and below but not in Firefox 3.6.8. It is also working well on Internet Explorer and Chrome and Safari. Please check if you can advise on this problem we are facing. Thank you. ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.0.249.78 Safari/532.5Reset the page zoom on pages that cause problems: '''View > Zoom > Reset''' (Ctrl+0 (zero); Cmd+0 on Mac)
See [[Text Zoom]] and [[Page Zoom]] and http://kb.mozillazine.org/Zoom_text_of_web_pages
You can try if it works if you disable OOPP (Out-Of-Process-Plugins) for Flash
You can set the prefs dom.ipc.plugins.enabled.* to false on the about:config page to disable the plugin-container process.
dom.ipc.plugins.enabled (currently false by default)
dom.ipc.plugins.enabled.npswf32.dll (Flash)
To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
If you see a warning then you can confirm that you want to access that page. -
Can no longer enlarge or shrink the screen.
Some gestures have been removed in Firefox 4.
You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
browser.gesture.pinch.in -> <b>cmd_fullZoomReduce</b>
browser.gesture.pinch.in.shift -> <b>cmd_fullZoomReset</b>
browser.gesture.pinch.out -> <b>cmd_fullZoomEnlarge</b>
browser.gesture.pinch.out.shift -> <b>cmd_fullZoomReset</b>
browser.gesture.pinch.latched -> <b>false</b>
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br /> -
Where you can download for the new MacBook Air?
where you can download iWeb for the new MacBook Air?
Welcome to the Apple Support Communities
You have to buy iLife '11 in Amazon > http://www.amazon.com/gp/product/B003XKRZES/ref=s9_simh_gw_p65_d6_i2?pf_rd_m=ATV PDKIKX0DER&pf_rd_s=center-2&pf_rd_r=1A0B6N3K4RCNDJ0XK5E3&pf_rd_t=101&pf_rd_p=138 9517282&pf_rd_i=507846 -
Does anyone have an issue with your iPhone 5 when trying to play music? Mine won't, on the screen you see the player run through songs very quickly but never playing.... Help!
Try this > Start a song, tap the screen, under the left side of the scrubberbar that appears, tap the icon to stop shuffle.
-
Since you don’t allow emails any more – I suspect because of the numerous complaints with your service and the way you treat people that you don’t want documented, I am calling and I want this call recorded for future reference.
I have been a long time faithful customer of vzw and although the past year I have been late on payments many times and really couldn’t afford your exorbitant prices for services lots of other companies offer sometimes three times cheaper than what you charge, I have hung in there trying my best to meet my obligations.
This month has been no exception. You don’t know the background; the whole story of people’s lives. I know you could care less because all you care about is the profit-the money that comes in.
I was told when I agreed to pay my bill on the third per the recorded message that I had 14 days to pay…you cut me off anyway. The phones are not the tissue; your suspending my service means I cannot work. I may lose my job…how do you justify that? In any case? The least you could do would be to keep 4986 on and cut the phones off. But no. You refuse to compromise and meet the basic needs of your customer. What does that say about your company? I tried to call back on three separate occasions to tell you I couldn’t pay because of unexpected expenses but couldn’t get out of the automated system…sadly couldn’t get to a real person which also speaks volumes to me.
All this tells me this is a company I don’t wish to be affiliated with any more. As soon as I can, I will discontinue service with you…I know you could care less. I will honor the remaining portion of the contract but that’s it. You don’t deserve my business. I am a good, hardworking person who, at the sacrifice of myself and my needs, always pays her bills…albeit late at times. I realize others tell you stories and lies to justify themselves. That’s not me. If you knew what I had been through the last 7 yrs you would marvel that I am still on my feet…don’t judge too quickly. You could be wrong…and in my eyes you are by doing this to me.
God will see us through this extremely scary time of that I have no doubt. No thanks to your company and lack of understanding and mercy. I am doing the best I can. Sadly you are not.
See I have choices. MANY choices of providers for services you offer. I don’t have to be treated like this. I don’t have to succumb to your coldness and callousness. I intend to choose better (and cheaper). If your company doesn’t get the “people factor” back you will be sorry.Problem here is you admit you cannot afford the service.
And you want to blame Verizon for losing a job because you have no cell phone.
If your job depends on that phone I would pay it on time every time if you need a job to pay your bill.
No other service is going to treat you any different. And if you cannot afford Verizon's monthly invoice how are you going to afford new devices, activation fees, possible security deposits on any other cellular carrier? You can't.
Also if you made an arraignment to pay and then decide you cannot do so, why should Verizon extend you service or credit, or why is it you want to use the service and data and not pay for it as agreed.
Get a prepay phone. Its evident the cost is too high for you to afford on post pay.
Good Luck -
Fresh installation of Exchange Server 2013 on Windows Server 2012.
Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
your folders with your Outlook data file (.ost)" is displayed.
If I turn off cached Exchange mode, setting the email account to not
cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
time.
I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
Microsoft Exchange RPC Client Access service is running.
No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
like OutlookAnywhere - which I might add had their place under that scenario.
In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
users.
Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
certificate.
See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
there is a 3rd - I forgot, but you get the idea).
Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
Open Outlook - BOOM! It works... Was it as good for you as it was for me?
You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
Frustrating beyond reason - that should be Exchange's new slogan...
Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
PS
ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else... -
When I try to play certain games on pogo, I get this: Oops, something is not right...
Flash Plug-In Warning
Explanation:
You do not have the Flash player installed on your browser.
How to Fix the Problem:
This game requires the Flash plug-in.
Download the latest Flash player now.
So I download latest still get error messageIt is best to go to the source, Adobe, to get their software and updates. Sometimes malware can infect sites with messages that appear legitimate, but will, instead, install malware/virus/trojan on your system. Read the following carefully to install and/or update Adobe Flash.
There are 2 versions of Adobe Flash; an '''ActiveX version''' for IE only and a '''Plugin version''' for most other browsers including Firefox. On a Windows system, you should always update both individually. '''''You do not have Adobe Flash (aka "Shockwave Flash" in Add-ons > Plugins) installed.'''''
#'''Using Firefox''', go to the following direct download link and SAVE the download to your desktop so you can find it later: http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe
#When the download is finished, close Firefox (File > Exit '''''OR''''' Firefox button > Exit)
#Click or double-click on the file you just saved to your desktop
#*In the installation window that appears, click the box to the left of "I have read and...." to place a check mark in the box
#*The "Install" button in the lower right corner will now be highlighted, click it.
#*The installation is quick.
#Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
#Direct link ActiveX version for IE '''''only''''': http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]
Maybe you are looking for
-
Remote channel selection on a 19LV505
I have my 19 inch LCD/DVD combo connected to an HD antenna. I have gone thru the list of channels and add/delete d the one I receive and the ones I don't. All of the add's were HD signals with station numbers like 12.001 and 15.001.... when I use the
-
Variable screen not seen when running BEx Analyzer
Hi Gurus, when i execute my query in BEx Analyzer for some reason i dont see my variable screen and it gives me a message saying variable values not entered. If i run the same report in RSRT i do get my variable screen. It was all find till yesterday
-
Given up on v20z power management
Well, I tried almost everything I could and neither Sun nor AMD could provide me with a solution to power management on the dual Opteron 248 v20z machine that I have here. I'm now left with two solutions 1) remove a CPU (that'll drop the idle power d
-
Background... The laptop died in the middle of writing an email. Power will not switch on from battery or from power suply. Removing the HDD and replacing it with another (or leaving it out) does nothing, it never gets to the POST. Conclusion
-
Certificate error when using connection broker on Mac client
We're using RD Connection Broker using IP address redirection for a couple of years now. Previously Mac client were using iTap RDP without any problems. Clients are connecting using a RD Gateway server. When trying to connect using the latest Microso