Warning In Check DB

Hello Guru's
Vital Information About Server
Database - ORACLE - 10.2.0.2.0
O/s - Windows NT - 5.2
SAP - Netweaver 04 - XI Server
kernel Information - Patch Level - 129
I am facing problem in my production server.
In DB13 - Check DB job we are facing problem since very long time
BR0978W Database profile alert - level: WARNING, parameter: DB_FILE_MULTIBLOCK_READ_COUNT, value: 128 (> 32)
BR0978W Database profile alert - level: WARNING, parameter: LOG_BUFFER, value: 2854912 (>< 2048,512 KB)
BR0978W Database profile alert - level: WARNING, parameter: OPTIMIZER_FEATURES_ENABLE, value: 10.2.0.2 (<> 9.2.0)
BR0978W Database profile alert - level: WARNING, parameter: OPTIMIZER_INDEX_COST_ADJ, value: 20 (<> 10)
BR0978W Database profile alert - level: WARNING, parameter: OPTIMIZER_MODE, value: ALL_ROWS (<> CHOOSE)
Please suggest me so that I can rectify this problem.
Thanks & Regards
Shishir

check note
900522 - Incorrect alerts/warnings in database check for Oracle 10g
Markus

Similar Messages

Warning during check table

hi everyone,
i create a new table and then check it, a warning like below will appear,"TABLES IS NOT YET CLASSIFIED". What will cause that? Any suggestion is appreciated.
Regards,
Julian

Hi,
"TABLES IS NOT YET CLASSIFIED".
this is because you have not classified your table
from menu EXTRAS->ENHANCMENT CATEGORY
now choose the one of the radio button ans press ok.
read the documentation of ENHANCEMENT CATEGORY also.
DE DE_RADIO_EXCLASS
Short Text
Enhancement Category Selection
Definition
Structures and tables that were defined by SAP in the ABAP Dictionary can be enhanced subsequently by customers using Customizing includes or append structures. The enhancements do not only refer to structures/ tables themselves, but also to dependent structures that adopt the enhancement as an include or referenced structure. Append structures that only take effect at the end of the original structure can also cause shifts - in the case of dependent structures - even within these structures.
You must select an enhancement category for the following reason: In programs where there is no active Unicode check, enhancements to tables and structures can cause syntax and runtime errors during type checks and particularly in combination with deep structures.
In programs where there is an active Unicode check, statements, operand checks, and accesses with an offset and length are problematic - for example, if numeric or deep components are inserted into a purely character-type structure and the structure thus loses its character- type nature.
Depending on the structure definition, the radio buttons allowed in the dialog box are ready for input. Choose one of the possible enhancement categories:
Cannot be enhanced
The structure must not be enhanced.
Can be enhanced or character type
All structure components and their enhancements must be character-type (C, N, D, or T). The original structure and all enhancements through Customizing includes or through append structures are subject to this limitation.
Can be enhanced or character-type or numeric
The structure and its enhancement must not contain any deep data types (tables, references, strings).
Can be enhanced in any way
The structure and its enhancement may contain components whose data type can be of any type.
Not classified
This category can be chosen, for example, for a transition status; however, it must not be chosen for creating structures.
The rules for defining the enhancement category result implicitly from the structure setup and the classification of the types used. These rules are as follows:
If the object contains at least one numeric type or a substructure or component (field has a structure/table/view as its type) that can be enhanced numerically, the object can no longer be enhanced character-type, but is itself, at most, enhanceable character-type or numeric.
If the object contains a deep component (string, reference, or table type), or it contains a substructure or component that is marked as enhanceable in any way, then the object itself is enhanceable in any way.
If the object does not contain any substructure or component that is marked as enhanceable, you can select cannot be enhanced. If the structure has not yet been enhanced, you can choose the categorycannot be enhanced in any case.
If you are creating new tables and structures in the ABAP Dictionary, the system proposes the category can be enhanced in any way as standard value for the classification of the enhancement options. If the developer chooses a more restrictive classification than can be enhanced in any way for a particular structure, then only the classification levels that adhere to the rules above are allowed. It is not possible to choose an enhancement option of a structure that is more restrictive than the classification resulting immplicitly from the structure setup and from the classification of the types used. Therefore, only the allowed categories are proposed for selection in the maintenance user interface.
If a structure depends on one or several other structures, the smallest category is chosen as implicit classification (in the order cannot be enhanced < can be enhanced and character-type < can be enhanced and character-type or numeric < can be enhanced in any way). This classification is greater than or less than the category in the other structures and also greater than or the same as the category that results from the actual setup in the original structure itself.
Regards
vijay

Warning in Check DB Job

Hi SAP Experts,
We have done an upgrade from 4.6C to ERP6 EHP3. After upgrade the job Check DB schedulled in DB13 ends with warnings. Below are the warnings.
BR0989W Unknown tablespace PSAPDATUSR defined in table SAPSR3.TAORA for table data class 'USR02'
BR0989W Unknown tablespace PSAPDATUSR defined in table SAPSR3.TAORA for table data class 'USR03'
BR0989W Unknown tablespace PSAPDATUSR defined in table SAPSR3.TAORA for table data class 'USR04'
BR0989W Unknown tablespace PSAPDATUSR defined in table SAPSR3.TAORA for table data class 'USR05'
BR0989W Unknown tablespace PSAPDATUSR defined in table SAPSR3.TAORA for table data class 'USR06'
BR0989W Unknown tablespace PSAPDATUSR defined in table SAPSR3.TAORA for table data class 'USR07'
BR0989W Unknown tablespace PSAPDATUSR defined in table SAPSR3.TAORA for table data class 'USR08'
BR0989W Unknown tablespace PSAPDATUSR defined in table SAPSR3.TAORA for table data class 'USR09'
BR0989W Unknown tablespace PSAPDATUSR defined in table SAPSR3.TAORA for table data class 'USR10'
BR0989W Unknown tablespace PSAPDATUSR defined in table SAPSR3.TAORA for table data class 'USR11'
BR0989W Unknown tablespace PSAPDATUSR defined in table SAPSR3.TAORA for table data class 'USR12'
BR0989W Unknown tablespace PSAPDATUSR defined in table SAPSR3.TAORA for table data class 'USR14'
BR0989W Unknown tablespace PSAPDATUSR defined in table SAPSR3.TAORA for table data class 'USR15'
BR0989W Unknown tablespace PSAPDATUSR defined in table SAPSR3.TAORA for table data class 'USR16'
BR0989W Unknown tablespace PSAPDATUSR defined in table SAPSR3.TAORA for table data class 'USR17'
BR0989W Unknown tablespace PSAPDATUSR defined in table SAPSR3.TAORA for table data class 'USR18'
BR0989W Unknown tablespace PSAPDATUSR defined in table SAPSR3.TAORA for table data class 'USR19'
BR0989W Unknown tablespace PSAPDATUSR defined in table SAPSR3.TAORA for table data class 'USR20'
Please advice how and what to do to aviod these warnings.
Thanks,
NItesh Jain

Hi Nitesh,
Please check the highlight part of attached note 442395 to solve this
issue:
BR0989W Unknown tablespace %s defined in table %s.%s
BR0989W Unbekannter Tablespace %s definiert in Tabelle %s.%s
Explanation: A tablespace that does not exist in the database was
specified in the TAORA, IAORA or TSORA table. The ABAP Dictionary uses
these tables when creating new database objects. Based on these tables,
BRCONNECT checks in multi component databases (MCOD, see Note 379572)
whether objects of different schemes are contained in the same
tablespace - this can cause problems with the tablespace Point-In-Time
Recovery.
User reaction:Correct the incorrect entries in tables TAORA and IAORA
with transaction SE16. Delete the entries if the relevant
tablespace does not exist or change the TABSPACE field if
the tablespace was defined with an incorrect name.
regards,
Paul

Syntax check warning

Hi All,
I hav a small query . i m working in upgrade and in slin syntax check warning i m getting warning
i hav a statement like ULINE AT 0(120).
Its giving a warning " Syntax check warning
The static output position "0" must be positive."
Can anyone plzz guide me regarding this,
thanking u all.
regards,
sahakla

Hi..,
in list output..
the list output length will be counted in terms of characters.. the default list length is 132 characters..
maximum no.of characters is 1023..
the count starts from 1.
thats it !!
there is nothing much abt it.
plz do remember to close the thread when ur problem is solved !! reward all helpful answers !!
regards,
sai ramesh

Extended Program Check Warning For Syntax Check

Warning:
Syntax Check Warning
This Warning only Displayed in SLIN
WHERE lgtyp IN S_LGTYP.
Messages :
In "SELECT SINGLE...", the where condition for the key field "LGTYP" does not test for equality .
There fore the single record yuor searching may not be unique.
IF NOT S_LGTYP[] IS INITIAL.
    SELECT SINGLE * FROM T301
     WHERE lgtyp IN S_LGTYP.----
>IT SHOWING THIS LINE
    IF SY-SUBRC NE 0.
      MESSAGE E005(Z01).
    ENDIF.
ENDIF.

Hi Raghu,
When you are using SELECT SINGLE, it is always better to use EQ in the condition than IN.
Instead of using select-options S_LGTYP, declare a parameter: P_LGTYP and if possible re-write the select query as below:
SELECT SINGLE * FROM T301 into lv_variable
WHERE lgtyp EQ P_LGTYP .
Regards
Deepa.

CHECKING NETWORK CONFIGURATION REQUIREMENTS : WARNING

Hello........
when I want to install oracle 10.2.0.1 software, there is warning about CHECKING NETWORK CONFIGURATION REQUIREMENTS
it is :
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
what can I do
tank you very much to help
ömer faruk akyüzlü
in Turkey

I suggest you to read this thread: Re: I can't access to my Enterprise Manager. Then you'll realize why it is important to define a fixed IP Address and not to entirely rely on a DHCP dynamically assigned IP Address. This thread shows you how to configure a Loopback adapter to solve this issue.
~ Madrid

Warning Query was cahnged ! Characteristic no longer exist' in workbook

Hi all
I am getting one warning ' Query was cahnged ! Characteristic no longer exist' while opening the work book
I have though cahnaged the query but every time I am getting this warning. Is there any way out to get ridof this warning message
Thanks
Sunny

Hi,
BizarreQuery Warning!
Check this thread to get the exact answer and cause of your issue.The issue is because you have changed the query and your workbook was saved befor you had changed your query.
-Mayuri

Cannot install Windows Exchange 2013 SP1 64x non-checked build

Hello every one.
I have a problem to setup a lab asigment for school.
I have 2 Windows 2012 standard server
1e AD, DNS, IIS
2e Exchange 2013 SP1 64x
i prepared AD and installed al the features needed for AD and the Exchange server.
But when i run the readines check before i install Exchange 2013 i get to following warning
Warning:
A checked build of the operating system is installed. This can cause system instability issues including crashes, hangs, and other performance problems. It's highly recommended
that the operating system be reinstalled with a non-checked build.
For more information, visit: http:// technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.OSCheckedBuild.aspx
I cant find out what to do, thear is no Boot.ini file in Windows server 2012, any one any idea's to solve this problem
Thanks for the help,
Greatings,

Hi,
Agree with Ed. A checked build Windows is used for debug. Before installing Exchange 2013, please make sure that you use a free build. I'm afraid that you need to reinstall the OS.
What's more, you can refer the following screenshot to determine which Windows build is running. Generally, it should be Free build.
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Client unable to check-in

Hi all!
My client is unable to check-in:
- the About dialog box of the ZENworks Security Client says that "check-in status: check-in incomplete"
- the log file says that
<Entry Stamp='2008-04-10 15:21:48:0843' Level='Warning' Category='Check In' Event='Failed to download credential'><![CDATA[
MS URL: https://myserver/authenticationserver/userservice.asmx
Error: 0x00000005: Access denied.]]>
</Entry>
I suspect I have a certification problem though
- before the client installation, I copied the certification file ESM-MS.cer into the same folder containing SETUP.EXE (as recommended by the installation guide at page 58)
- I imported ESM-MS.cer (and ESM-DS.cer, too) into Internet Explorer and therefore it can display the page https://fules/authenticationserver/userservice.asmx without any certificate warnings
Any ideas?
Cheers,
Robert

Originally Posted by zesm
We request that you open a support ticket with us. This will allow us to get more diagnostics from your machine setup.
Hi,
I have the same problem with the only difference I can't get over the "0x00000005: access denied" error
Thanks,
Jan

I have Windows 7. When I start Firefox 4, I get a warning, "Do you want to allow this program to make changes to this computer"? Is there a way to stop this warning?

Question
I have Windows 7 Home Premium. When I start Firefox 4, I get a User Account Control warning, "Do you want to allow the following program to make changes to this computer"? Is there a way to stop this warning?

Check that you do not run Firefox as Administrator.
Right-click the Firefox desktop shortcut and choose "Properties".
In the Compatibility tab, make sure that Privilege Level: "Run this program as Administrator" is not selected.
Also check the Properties of the firefox.exe program in the Firefox program directory.

Delete pnp warning

Hallow I have warning (in check) when I use the logical database pnpce
All time in all program
How I delete it
This is the description
regards
In Unicode programs, the "-" character cannot appear in names, as it
does here in the name "PNP-SW-IGNORELOCKEDRECORDS".
Include DBPNPCECOM
In Unicode programs, the "-" character cannot appear in names, as it
does here in the name "PNP-SW-ENQUEUEPERNR".
Include DBPNPCECOM
In Unicode programs, the "-" character cannot appear in names, as it
does here in the name "PNP-SW-FOUND".
Include DBPNPCECOM
In Unicode programs, the "-" character cannot appear in names, as it
does here in the name "PNP-SW-AUTH-SKIPPED-RECORD

Uncheck the Unicode checkbox in the Program attributes.
~Suresh

Override the storage section check for manual entries

Hi All,
I am facing a issue on Storage section search.While creating To system is giving correct Storage section according t the settings but if I would like to change the storage section to different storage section system is not giving any error message.It is giving only warning message check your enteries.
So I would like know is there is config settings to avoid another storage section selcetion which are not assignned storage search indicator.
I have checked in help.sap.com .I following information .
To set up the strategy for storage sections, see the section on activating storage section searches under Strategies in the Warehouse Management IMG documentation.
If storage section checking is active for the storage type, then the system searches in the storage type only for those empty storage bins in storage sections that have been allowed for the material being put away. When you are creating a transfer order and manually enter a storage bin, then the system checks whether the bin is in a storage section that is allowed for the material.
*You can also make an entry in customizing that permits you to override the section check for manual entries.*_
Can please advice me inorder activate the config for override the section check for manual entries or any warning message.
Thanks & regards,
Srikanth

HI,
Thanks for your reply.
I want Error message.
Regards,
Srikanth P

How can I verify virus warning from Apple is valid?

I just received a notice from the "Apple security center" warning me that Apple Web Security has detected Trojans and is ready to remove them all. This is followed by options to Cancel or Remove all. The claim is that 66 viruses have been found.
I am suspicious to follow this warning in case it is not legitimately from Apple.
My Apple Care is expired and I cannot find a way to contact them to verify Apple sent this warning.

Hi spartan, I've just received a similar warning.
Check this video:
http://www.youtube.com/watch?v=g0hNrr_A5Gc
It is a trojan horse. Once you clic on any button it will download an "anti-malware.zip" file which has a "inavd.pkg" file that should have an anti-malware. In case you've downloaded them, just delete them and empty the trash. Finally, close that tab and contact apple: http://www.apple.com/contact/feedback.html
Good luck!

Check-in Incomplete ; Unknown Function

I am running EPM 4.1.221 and am currently unable to get client computers to check in. The error reported is:
<Entry Stamp='2010-10-04 13:27:38:0286' Level='Warning' Category='Check In' Event='Failed to download credential'><![CDATA[
MS URL: https://myserver.leanderisd.org/auth...erservice.asmx
Error: 0x00000001: Incorrect function.]]>
</Entry>
The security client is set up in Computer mode, and is authenticating to Active Directory.
I've performed the troubleshooting recommended in TID 3788192 to no avail. There are no SOAP errors in the event viewer and I can access the URL referenced in the TID with no certificate prompting.
The domain controller chosen for the AD source is not a PDC emulator and does contain a global catalog.
Can anyone recommend any further troubleshooting ideas?

Honestly, besides opening a ticket with Support, no ideas. If it is a bug, you'll not be charged.
Sorry I can't help here.
>>>
From: jameswatson3<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 10/6/2010 10:06 am
Subject: Re: Check-in Incomplete ; Unknown Function
The most inscrutable part of the error is the "Error: 0x00000001:
Incorrect function" portion. I have seen multiple posts that refer to an
"Error: 0x00000004" or "Error: 0x00000005", but I cannot find any
additional info regarding the "Incorrect Function"
Any ideas?
jameswatson3
jameswatson3's Profile: http://forums.novell.com/member.php?userid=1584
View this thread: http://forums.novell.com/showthread.php?t=422534

Warning or Error in SAP NetWeaver XI installation..

I have windows 2003 enterprise edition with SP1
i have completed installing Central instance
now when i try to install the DB instance i get the following warning..
<b>Warning after checking DB instance on "systemname"
Only enterprise edition is supported in production environment</b>
as i go ahead with the installation of the database instance i get the following:
"An error occured during the installtion of the component SAP Net Weaver........"
I click on the "view log" button
and this is the error
"E:/Export/DATA does not exist"
PLease assist me resolving this error

Well does it exist?

Warning In Check DB

Similar Messages

Maybe you are looking for